2009-2018 RAM Cab vents replacement - Easy Install process - part 68323649AB
Вставка
- Опубліковано 25 лис 2023
- I had a small leak on my 2017 RAM Sport quad cab that was accumulating in the storage bin under the driver's side rear seat. I narrowed it down to a few possibilities and did some water tests and found the cab vent to be leaking on that side. Luckily it's not too bad to replace and I had the seats and everything removed and replaced and tested again with no leaks in about an hour, taking my time. Correct term and part number for this new updated part is Bodyside Aperture Exhauster - Mopar (68323649AB). I was able to find mine at the below link.
www.moparfactoryparts.com/oem...
These seem to fit a wide range of vehicles according to their site.
Hope this video helps and you found it useful. If so, consider subscribing, or leave a comment or question if you'd like. Thanks for watching!
#ram1500 #ram #repair - Авто та транспорт
The string from the bottom idea was genius! Saved me a bunch of time and frustration
So glad it helped!
How long did it take to remove/re-install seats?
Depends if you have the right tools I’d say somewhere between half an hour to 1 hour. Could go faster with help
Did mine last weekend, this video was super helpful. It was definitely leaking from these original vents....to my shock none of the "flappers" were actually present on either!
Glad it helped you track it down. Thankfully the new ones I installed are still doing fine, wonder how long this new design will last. Thanks for watching.
The amount of hours I put my ram on ramps lookin for a damn crack under the truck smh lol awesome video man and thanks for the info!
Thanks so much for watching and glad it helped! I did the same, crawled under there multiple times, just knowing that it had to be coming from underneath. So far so good and no more leaks since I replaced the vents!
I've been chasing where the leak was coming from in my truck for months. I would have never guessed it was something like these vents. Sure enough, one of them was the source of the leak. Thanks for the video and the part number. $35 later and she's all fixed up and leak free.
Glad you tracked it down and got it fixed up! Thanks for watching.
Can you help explain how you removed and Reinstalled the new ones? I do not have much of a gab betweeen the cab and the bed
@@matthayden8078 It was a snug fit between the cab and bed. But, I was able to just pop out the old ones and used a scrap of wood to push it out the bottom, where there's a gap that's plenty big enough to get it through. For installed the new one, I tied a string to it and lowered it down. I can't remember for sure, but I think on the passenger side I had to push it a bit with that same scrap of wood because it was a tighter fit on that side.
Same thing with mine. The driver's side was plenty large enough that it fell to the ground when popped out, and slid easily back into place. The passenger side was a lot tighter and had to pull on it to get it to go back, but thankfully it went. I can imagine some trucks might be even worse and it would be hard to get them to go back. I couldn't imagine having to remove the bed or loosen it just to get these in. Glad that wasn't my case. Good luck with it.
Absolutely genius man, thank you so much! Got this whole job done in under 2 hours including removing and reinstalling my sub setup.
Awesome, glad it helped! Thanks for watching.
Thanks Raymond! Doing mine tomorrow. Love the string and slide in, you the man!
Thanks so much, appreciate it. Hope it goes smoothly for you!
Outstanding Video
Thanks so much, and thanks for watching!
That was me last weekend. Dry now.
Man, I just replaced mine after watching this video. The wire trick was genius. Worked like a charm. Mine is a 2014 and I assume they were the original vents because there were no flappers left on either of them. And the rubber gaskets were dry rotted. I was able to rotate the old ones and pull them back into the cab, while the old gaskets crumbled. Thanks for posting this video.
Glad it helped and you got your vents replaced!
Great video! Thanks for the tutorial
Thanks! Happy to help. Mine, thankfully, is still holding strong and no more leaking!
Thanks for saving me a ton of time!
Happy I could help and thanks for watching!
I'm about to tackle this tomorrow. Had a puddle of water on the passenger side after a week of rain. Pissed me off when I went to grab my tools under the seat and they were sitting in water. Thanks for the vid and tips. I put Laramie seats in my Harvent Edition, so I wasn't worried about that. I was worried about getting those vents in and out. Some people say the bed has to come off. lol
Hope it goes smoothly for you and you don't have to deal with the bed. Good luck with it!
Awesome video, definitely will be tackling this once it warms up. I have the dreaded puddle of misery, haha! Thanks for the information and tips on getting them in!!
Thanks so much! Sure hope it goes as smoothly for you as it did for me. Thanks for watching!
Great vid. Just ordered these since troubleshooting points to these leaking. No water or dampness around brake light, i.e., surrounding headliner area. Noticed water in the storage compartments under the back seats after some pretty heavy rain (Florida). Also right under the vent (both sides). New vents around $9.00 plus shipping. Truck is a 2015 Ram 1500
Sounds just like the issue I was having. So far so good with mine and the replacement, no more leaks still. Hope you get it fixed up and that solves everything for you. Thanks for watching!
Good job buddy always enjoy your videos
I'm trying this tomorrow. I've been trying to figure out why I had moisture in my cam which was freezing up on the windshield. After replacing glass in front and back, then the 3rd tail light gasket, I found this video. Then I finally found how wet it got on the floorboard back seats. Pretty sure both vents need replacement.
Good luck with it, hope it finally solves your problem!
Thanks, I think you just helped me solve a mystery
Glad I could help! Thanks for watching.
I inherited a truck from my brother. I took it to get tires yesterday and wanted them to save the best for my spare. The tool kit was under passengers side rear bench seat. Depression was filled with water! I also noticed the front seat rear mounting and bolts was rusted up. I guess my brother never noticed. There is no moldy odor but I think I need to check for mold under the carpet when I replace the vent too. Thank you for you vid.
Hope you get it all fixed up. It's a sneaky problem to have. I had no idea either until I reached under there and my ratchet strap was soaking wet.
@@RaymondLambI wonder if other manufactures have them and how long have the been incorporated into the cab design?
Started the process today. I got the old ones out - drivers side was missing 5 of the 9 flaps!
Of course, one of the new vents has a broken tab - I get to wait for a replacement.
I also found the passenger side a tight fit between cab and bed - took a bit of finagling to get old one out and new one in.
That was the same with mine, the passenger side was a lot tighter than the drivers, but there was enough room to make it work. Hope you get the replacement and all goes back together! Thanks for watching.
Thanks for the video I was wondering how to get the vent out of the crack!!
Happy to help, thanks for watching!
After pulling my seats out, I found one of the two vents had NO flaps at all, just the plastic housing! I had a nice clear unobstructed view of the truckbed frame from inside the cab LMAO.
Wow, that's crazy. Seems like they would make these out of a little more robust materials.
I got the double whammy on my 2016. 3rd brake light and the cab vents. Unreal how poorly this was designed. And still even models as recent as 2021 and 2022 have the leaking issues.
I know it, crazy that the little rubber flap is all there is to it and they break off or disintegrate so easily. I haven't run into the brake light leak yet, but I'm sure it's just a matter of time! Thanks for watching.
Just fixed this same exact issue with my ram.
Its now down pouring rain and its all dry in the inside of the cab.
I would highly suggest for the first timers fixing this issue is applying fluid film or grease to the big bolts on the back of the seat mount when putting the seat back in because those bolt are prone to the elements outside and can rust and make it very hard to remove the seat.
Nice tip and glad you got yours all fixed up!
Damn, you're lucky. My 06 my bed and cab are too close to slide the newer thicker vent through via the outside. Ended up trimming the unnecessary posts on the outside and was able to get them through in the cab. If you look on the mopar site there's another "upgraded" part 68324094AB that also have a grill on the back like the older ones. I'm guessing that's for cab only trucks with no bed so it looks nice. The grill fits over the outside of these to keep debris out, but if it was installed then these would be way too big to remove/install with the bed in place. They could really design these better and easier to replace but keep sticking with these poor designs. We'll see how long these last. I have a feeling the flaps could fall off since there isn't much holding them in place.
Man, I hate to hear you had that much trouble out of them. Glad you got it worked out in the end. I'm not sure why they couldn't come up with something that just snapped in some way from the inside.
Back bolts hard to get to and get out
Do you think it would be worth putting a bead of silicone around the edge of the vents before snapping them into place?
I thought about that myself but with the new design they have better clips that hold them tighter in place. I think the old style had thinner clips that wore out and caused it. Might cause an issue if you had to take them back out. Good luck with it!
Nice video. Did you upgrade your subwoofer?
Not yet, it's still the factory one. I plan on doing a full audio upgrade soon with amps, and dual JL Audio subs. Check back or consider subscribing if you'd like to follow along. Thanks for watching!
Hello, good afternoon, can you please tell me what the piece is called?
Hello, most everyone calls them Cab Vents, but the name on their parts website is "Bodyside Aperture Exhauster" here is a link to where I purchased so you can see. www.moparfactoryparts.com/oem-parts/mopar-bodyside-aperture-exhauster-68323649ab
@@RaymondLamb ok thanks
I think I have that issue. Back inside area gets wet after a heavy snow or rain.😩
In my case I felt like it could only be a few things. Luckily this was a cheap easy fix and haven't had an issue again so far. Good luck with it if you tackle it yourself!
How long is shipping taking? I went in to the dodge dealer and they said 1month out.
Check out the link in the video description. That's where I got mine and they have them in stock now. I didn't wait long at all and had them.
@@RaymondLamb I click on link and it shows "unavailable" Is that different for you?
I did look the other day and they were unavailable at that link. I just clicked it now and they claim 40 available. You might can grab them now. Or google that part number and see if you can locate them somewhere else. Good Luck!
Nice, thanks!
What was the new part number?
Hello, it's in the name of the video, the description, and I have a link to where I purchased too. Hope that helps.