Good video and info, I'm restoring a 1986 Iroc and with all new weatherstipping the side windows need adjusting, do you have any info or video's on the side window adjustment? I know theres alot of things to adjust but I don't know where to begin, 1986 Iroc T Top, thanks, Allen
Great video! I was wondering how to remove that V to get to that last screw but decided to just cut it off and use some silicon to hold that little end of sweep in place.
Well, some cars did NOT have bolts on them but screws holding on that weather strip. Sooo, very hard to take on and off! you need a micro Philips with a very narrow handle wrench to get at those...even with the window forward it's a PAIN to get on and off! I will be finding new screw bolts instead to install this again, but they have to be narrow profile to avoid scarping the glass once installed. Just my painful experience with these! ALSO, mark where that triangle was! It is also a pain to put back and line up that darn window...if not, you will probably be fiddling with it for hours to get it to line up correctly...! I never thought it could be that hard until I had to replace the worn-out triangle piece...YIKES!!!
I have replacement window weather stripping for my 1992 GMC Sierra PU. Do I need to remove the side panel in order to replace the outer weather stripping only?
We currently do not have an auto repair video that shows this procedure. You might have to remove the door panel if you can't access the bolts or rivets that may be holding them in place. 1aauto.com 888-844-3393
dont suppose you guys have a contact number and a person to talk to? I am restoring a 91 formula and have lots of questions and will likely buy a good quantity of parts lol. Case and point: the inner door handle doesn't work.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Thanks for checking out our auto repair videos. We currently do not have a video that shows that particular repair.
@bandu1 We currently do not have a window seal for that particular vehicle.
Where can I find that bracket that was mentioned at 3:40 in the video?
Good video and info, I'm restoring a 1986 Iroc and with all new weatherstipping the side windows need adjusting, do you have any info or video's on the side window adjustment? I know theres alot of things to adjust but I don't know where to begin, 1986 Iroc T Top, thanks, Allen
@jort75 Yes they are located here. Copy and paste into your browser.... 1aauto.com/1A/Weatherstrip/Chevy/Corvette/1AWSS00107/245245/1989?ATony
You should be able to get it started with a small wrench, as we show in the video.
Thank you for visiting our UA-cam channel.
Great video! I was wondering how to remove that V to get to that last screw but decided to just cut it off and use some silicon to hold that little end of sweep in place.
Well, some cars did NOT have bolts on them but screws holding on that weather strip. Sooo, very hard to take on and off! you need a micro Philips with a very narrow handle wrench to get at those...even with the window forward it's a PAIN to get on and off! I will be finding new screw bolts instead to install this again, but they have to be narrow profile to avoid scarping the glass once installed. Just my painful experience with these! ALSO, mark where that triangle was! It is also a pain to put back and line up that darn window...if not, you will probably be fiddling with it for hours to get it to line up correctly...! I never thought it could be that hard until I had to replace the worn-out triangle piece...YIKES!!!
Do you have the window outer seal (or sweep) for a 1989 Corvette L98? It has the removable top.??? Thanks,
JD
there's a think called audio relativity. Your video(s) is/are so much louder overall than everyone else's on UA-cam.
Do you by any chance have a window outer seal/ sweep for a 95 mitsubishi eclipse gs?
Thanks this video was very helpful. I see its not a big deal to change them so I just ordered the sweeps from your website.
I have replacement window weather stripping for my 1992 GMC Sierra PU. Do I need to remove the side panel in order to replace the outer weather stripping only?
We currently do not have an auto repair video that shows this procedure. You might have to remove the door panel if you can't access the bolts or rivets that may be holding them in place. 1aauto.com 888-844-3393
Great Video... I need to do mine as well on my 85.. I had difficulties removing my door panels specially lock..
thanks very much for the info, I just started restoring the identical car so ty for the help.
Very nicely done!
1A needs to change their trash intro for something that doesnt blow speakers.
Very helpful! Thank you so much for posting this video!!!
@frednich9603 Thanks for the tip, it is not a hard removal as it is but anything to make it easier!
What are the "triangle piece at the front of the window" called?
"triangle piece at the front of the window"
+dave96_118 Thanks for watching! That is just a piece of trim the is the same shape as the mirror sail mount. 1aauto.com
Great video!
Just to be sure are these also known as Window Weather "Strips"
Perfect video, thanks a lot!
You're welcome. Have a great day! 1aauto.com 888-844-3393
dont suppose you guys have a contact number and a person to talk to? I am restoring a 91 formula and have lots of questions and will likely buy a good quantity of parts lol. Case and point: the inner door handle doesn't work.
+Brandon Freeman Sure you can call our sales staff at 888-844-3393. Hope this helps you out. 1aauto.com
a 7mm offset wrench makes this job 10X easier
Thanks for the helpful video. I need to replace mine after someone tore mine up trying to break into my baby.
Thank you for watching. Please let us know how the repair comes out!
1aauto.com 888-844-3393
Replace door sweeps 1985 camaro