This would make the ultimate powered wing. Either center mounted prop, with a slot cut in the middle of the body, or a pusher configuration from the rear. Now that I have most of my first non powered version printed, I might try to mess with the modifiers and see if it could be done.
Thanks for you inquiry. 3mf/stl file is available now at cults3d.com/en/users/Geode_rc/3d-models Please refer to your preferred 3D Printing service for manufacturing services
использовали аэродинамические расчеты в программах и все равно получилось нелетающее изделие -)))) Мозгов и опыта нет , не помогут вам современные калькуляторы . Палочкостроители мамкины . Нужно было 100 килей вместо двух в центре поставить и эллипс посерьезнее и качалки длиннее.
This would make the ultimate powered wing. Either center mounted prop, with a slot cut in the middle of the body, or a pusher configuration from the rear. Now that I have most of my first non powered version printed, I might try to mess with the modifiers and see if it could be done.
@@mikebergman1817 👍
cool Projekt
Thanks 🙏
It is not the lift distribution that must be elliptic for minimum induced drag...
Must be 👍
This is so cool! I tought TPU was too heavy? What is the AUW? I really would like to print one - great work!
Thanks for watching. AUW is 780 g. Please refer to cults3d for additional details - cults3d.com/en/users/Geode_rc/3d-models
@@geode_rc 🙏- will do. Will print :). What tpu-hardness did you use? I got a roll 40D - will that do?
@@tublarge Thanks ..🙏. I use 98A (~55D). 40D is too soft, not recommended.
I wonder if this could be launched as a DLG??.
The stiffness of TPU is relative low compared to materials typically used for DLG. Not recommend using TPU for DLG.
This is so freaking cool. Did not know this was possible. Have you experimented with Colorfabb Varioshore much? Foaming tpu that comes out very light.
Certainly worth a try to get as light as possible 👍
Foamed varioshore is way too soft for this
Can you share the files? I would like to print it. Thanks
Thanks for your interest. Coming soon. See link for manual & test file for now:
cults3d.com/en/design-collections/Geode_rc/manual-and-test-files
I thought it was for free. I would like to print it in LW-PLA. @@geode_rc
Any plans to manufacture and sell them ?
Thanks for you inquiry.
3mf/stl file is available now at
cults3d.com/en/users/Geode_rc/3d-models
Please refer to your preferred 3D Printing service for manufacturing services
@@geode_rc I just bought this model/files. There are no STL files, only 3mf...!
3mf is a superset of stl. To get stl, please see FAQ in user manual or my UA-cam file conversation video on how to export stl. Thanks.
Did you use a pw foil ?
PW modified
You got the file fam?
Yes, they are available on cults3d -
cults3d.com/en/users/Geode_rc/3d-models
использовали аэродинамические расчеты в программах и все равно получилось нелетающее изделие -)))) Мозгов и опыта нет , не помогут вам современные калькуляторы . Палочкостроители мамкины . Нужно было 100 килей вместо двух в центре поставить и эллипс посерьезнее и качалки длиннее.