Know how I know you guys are doing it right, I hear the kids in the background the whole time. I drive a 98 sbsc and doing my research now, one day at a time. Good stuff fellas 🤙
I’m happy that 7HunDun has finally came alive! It’ll sound badass with the mufflers. For right now without a muffler or catalytic converter it’s too loud for my preference.
I’m almost finished installing my bp harness I put the ecu behind the glove box and re did the factory harness wrapped it with that same braided loom. Best bang for the buck on a standalone harness
It's a damn good harness. This my work truck so I'm wasn't too worried about wire management. Long as it doesn't look like a mess, I'm good. I will tidy it up after I get exhaust ran but I definitely aint spending too much time on it.
Anyway you can go over the wiring for the cruise control? Having a hell of a time figuring mine out. Got the module out donor vehicle, can’t find any info on wiring it up though. 1993 c1500.
What do you mean? The stock obs harness has a cruise control plug. It plugged right into the donor cruise module. Im not sure if it works or not. But I also have the donor plug. I haven't tried either yet but I guess we'll see soon.
I did away with the stock obs ecm and trimmed away the obs harness. I kept the original plug for the cruise control though. It’s separate from the obs engine harness. Not sure if it’ll work that way either. We’ll see if I ever finish my build. Lol.
All right KJ as usual a good video good contents and man please keep that dude as a mechanic that do got it going on and I definitely can't wait for the next video
If you get the right turbo setup you can use those long filters on the heads of the turbos so I wouldn't throw them away just yet plus you haven't done temple red yet but nevertheless she sounds good
Clean af!! What size tires you running bro? I have an extended cab but it’s stock height, what size tires you think I should run? I have 15” Vision D Window all black wheels.
So am working on doing the 5.3 4l60e swap and everything went on smooth trans cross member seems to be sitting back to normal location but my drive shaft barely reaches the output shaft to where it doesn't even reach the seal. My truck is a 92 gmc sierra short bed that was a manual v6 and then was swapped to a 350 700r4 engine and well here i am scratching my head. Anyone has had that problem? Help is much appreciated
This is prob a ignorant question. I’ve noticed custom harness’s and made harness on your videos. I’m assuming you have a hook up on a good tuner? Or do you use like a hp tuner on your own? Reason for my questions around my area it’s around 600-800 for a tune, that’s just a vats delete and base tune. Was thinking about the fi tech 70050 self learning efi, kinda plug and play and roll. When the efi kit is around 900
@@CoolCarsKJ thank you sir! That’s why I’m almost said heck with it and went with self learning efi with the full kit is $900 and not have to mess with the tuners around me, awesome content! Very knowledgeable, I have a 89 c1500 that just like your white one, same wheels, and white 😂 it was my grandfathers to begin with, then my fathers, now mine. After loosing both of them in the last 3 years I believe it’s only right to do a ls swap and and have a lot more power than the gutless tbi 4.3 that’s in it
The hose from what? The waterpump? You can bypass the heater core if you want, autozone sells a piece that fits both outlets on the water pump to bypass it
Bro you rock! Like what you doing. I’m unofficially part of your OBS Boys. Your D.C. chapter! 😂💯💪🏿 Shout me out on your channel. I watch you all the time.
Know how I know you guys are doing it right, I hear the kids in the background the whole time. I drive a 98 sbsc and doing my research now, one day at a time.
Good stuff fellas 🤙
Man I’m excited like it’s my truck.lol big step forward. Look like that revving caught Big Ben by surprise.lol
Finally… SHE’s ALIVEEE!!!!!!
KJJJ!!!! CONGRATS on another ☝🏽!!! Love to see u doing great things! Nothing but love n support brother!
Maaaaan that white obs going to be a monster!!
That mug sounds naaaaasty!!!! I love it
That blue nbs in the back ground 😳 👌 😍 made me miss my white 05 #GmcTex 😫 😩
Dammit boy. Yes sir
Glad I found this video was trying to watch it earlier I don't know what happened
7:36 gotta love that ls sound man god Lee ! I swear it’s beautiful 😎
Got that bad boy running! It’s up now 🔥🔥🔥
Got my 95 obs dully 5.3 ls swaped finally going on its own thanks for everything Cool Cars KJ and the the LS swap Guru
Big CONGRATS bruh
Congratulations sir!
Man she sounding good.
Congrats on the first start up bro💯👍👏👏👏
I have the same setup inside my 92 silverado shortbed. Same bucket seats and everything I just have a stick shift. Great content. 💪 💯
Congrats on getting it running 👍🏾👍🏾👍🏾
Another great video glad you got it running giving me inspiration to keep going on my projects
Leaving small crack in windows so that heat can escape and covering plastic can help prolong cracking.
Ready for the road!!
I got me a dash cover for mine can't think of the place right now but I will let you know brother
Nice! Love that sound. Congrats 👍
Keep doing your thang much respect bruh
It’s ALIVE congrats bro
It’s been a long time coming 👊🏾
I’m happy that 7HunDun has finally came alive! It’ll sound badass with the mufflers. For right now without a muffler or catalytic converter it’s too loud for my preference.
I know you are a happy camper
I’m almost finished installing my bp harness I put the ecu behind the glove box and re did the factory harness wrapped it with that same braided loom. Best bang for the buck on a standalone harness
It's a damn good harness. This my work truck so I'm wasn't too worried about wire management. Long as it doesn't look like a mess, I'm good. I will tidy it up after I get exhaust ran but I definitely aint spending too much time on it.
@@CoolCarsKJ oh okay I feel you lol. Shoot still gone look clean either way it go
Bruh Ben has really grown up ! Not to over look King Brey too. Good stuff! OBS 4 Lyfe
Semhundun Sound good KJ.✔️🎯
It’s ready for the streets now💪
Yessir!! Congrats bro
Hey what’s up bro how are you #OBSGANG stand up checking in with you one love bro
💪🏾💪🏾💪🏾💪🏾❤️OBS GANG I CANT WAIT TO FINISH MINE UP ⬆️. CONGRATS. KEEP GRINDING MUCH LOVE. WHEN MINE GET DONE WE GOING TO LINK UP
Congratulations king....another one 🔥🔥🔥
Great Job!!!
YES SIR!!!
Nice camshaft in that LS.
Cool obs but I would of gone with kn air filter not those cheap air filter
I be back and forth trying to keep up with u
Older trucks are nice, but a whole lot of work and money to get them back right.
Anyway you can go over the wiring for the cruise control? Having a hell of a time figuring mine out. Got the module out donor vehicle, can’t find any info on wiring it up though. 1993 c1500.
What do you mean? The stock obs harness has a cruise control plug. It plugged right into the donor cruise module. Im not sure if it works or not. But I also have the donor plug. I haven't tried either yet but I guess we'll see soon.
I did away with the stock obs ecm and trimmed away the obs harness. I kept the original plug for the cruise control though. It’s separate from the obs engine harness. Not sure if it’ll work that way either. We’ll see if I ever finish my build. Lol.
All right KJ as usual a good video good contents and man please keep that dude as a mechanic that do got it going on and I definitely can't wait for the next video
I see you..making moves..
need to paint the orange truck shes bad ass
Choppin🔥🔥🔥
All that engine bay needs now is a clean alternator lol
Nice job KJ
If you get the right turbo setup you can use those long filters on the heads of the turbos so I wouldn't throw them away just yet plus you haven't done temple red yet but nevertheless she sounds good
That's a pretty good idea
🔥🔥🔥🔥
Congratulations, KJ. Does it have a cam in it? It’ll sound badass when you get the mufflers on it. Thanks for sharing! Great video.
Yes, it has a Texas Speed Cam in it.
Hey KJ where did you get those tie rod adjuster ends at those are pretty fancy I'd like some more I'd like to see if I can get some of those
Cunningham Machine
www.cunninghammachine.com/product/tie-rod-sleeve-c1500-steel-k1500/
Thank you man appreciate you
We need more videos like these
Running a business doesn't allow a while lot of time. I hope to bring some more videos, for sure.
What does OBS means? I'm sure it's right in front of me but. I enjoy your videos. Keep it rolling!!
Thanks
Old body style... Ford & chevy have their own "OBS" . thanks for watching!
Where did you get the cold air intake? Link? What year make and model? Thanks...
Clean af!! What size tires you running bro? I have an extended cab but it’s stock height, what size tires you think I should run? I have 15” Vision D Window all black wheels.
275/60r15 is what I run. If you have 15x10 wheels, I'd go 275/60 all day
where did you get those radiator brackets on the orange truck?
You can get them from ANY obs chevy/gmc that had a 454 engine
here we go 103
So am working on doing the 5.3 4l60e swap and everything went on smooth trans cross member seems to be sitting back to normal location but my drive shaft barely reaches the output shaft to where it doesn't even reach the seal. My truck is a 92 gmc sierra short bed that was a manual v6 and then was swapped to a 350 700r4 engine and well here i am scratching my head. Anyone has had that problem? Help is much appreciated
She sounds good 🔥🔥🔥 Where did you get the harness from
BP Automotive
Thank you 🙏🏿
Hey What’s going on with King Bre truck
Gotta swap out the clutch
The OBS Brothers Gang!!!! 🤣🤣🤣
Mannnnn that shit was super funny! Especially how he stepped back like he dropped the mic. 🎤
Where did you get the harness from? I’m doing swap on my OBS 😊
Looks good man! o7
What you gonna do to the sierra next to that truck
That truck is for Bentley. He'll be 10 in November. It'll be right by time he starting moving & shaking!
@@CoolCarsKJ my man 🙏🏽
Bp automotive make some nice harnesses that’s what I’m using
Hell yea bro! Damn good quality
luv your channel bruh. Could you send me the part # and company that made that cold air intale.
amzn.to/3HXngt6
Is that a different clutch than the one you list in the early video and does it use the same flywheel you list?
Yes. LUK 04-205 for external slave. Apparently 04-201 is for internal slave. Some new information came out since then.
I hear it chopping! It’s like music to your ear!
Dash cracked from heat buildup. Leave your windows down a little bit.
whats size are those headlight
4x6
Cold air intake part number?
This is prob a ignorant question. I’ve noticed custom harness’s and made harness on your videos. I’m assuming you have a hook up on a good tuner? Or do you use like a hp tuner on your own?
Reason for my questions around my area it’s around 600-800 for a tune, that’s just a vats delete and base tune. Was thinking about the fi tech 70050 self learning efi, kinda plug and play and roll. When the efi kit is around 900
There are a ton of tuners in this GA region. Hell the guy that does my street tune charges $250. $600-800 is highway robbery
@@CoolCarsKJ thank you sir! That’s why I’m almost said heck with it and went with self learning efi with the full kit is $900 and not have to mess with the tuners around me, awesome content! Very knowledgeable, I have a 89 c1500 that just like your white one, same wheels, and white 😂 it was my grandfathers to begin with, then my fathers, now mine. After loosing both of them in the last 3 years I believe it’s only right to do a ls swap and and have a lot more power than the gutless tbi 4.3 that’s in it
How much does a swap like this cost from start to end?
Doing your own work, probably between $2000 & $4000, depending on certain options you choose
Nicez job nasty obs gang💯🔥🦾
Do I need to have the hose Running in to the heater core on my ls swap or can I leave it bypassed
The hose from what? The waterpump? You can bypass the heater core if you want, autozone sells a piece that fits both outlets on the water pump to bypass it
@@CoolCarsKJ is it ok to leave it like that
No audio
😎💪🏿💪🏿💪🏿💪🏿💪🏿
👍
💪🏽💪🏽💪🏽👍👍👍
Only bad thing about them trucks dashboard doesn’t last sitting outside in the heat
Bro you rock! Like what you doing. I’m unofficially part of your OBS Boys. Your D.C. chapter! 😂💯💪🏿 Shout me out on your channel. I watch you all the time.
I'm in DC...hit me up...fam
@@kevinwilliams5735 hey
Been watching this 91 since the first 700$😜
Ayyyyyyye! It's been a journey but she about ready to hit the streets!
I appreciate the continued support brother 🙏
Please clean/paint that battery hold down. It looks ugly next to that powder coated battery tray.
Most definitely
🙆🏾♂️🙆🏾♂️🙆🏾♂️🙆🏾♂️
What’s up kJ I need you help I’m having a problem with my fuel pump whenever u get time to hit me I’ll give you my number
You can send it on instagram or email it to me.
@cool_cars_kj
Coolcarskj@gmail.com