For that torn leather seat,just find a good passenger seat cover from da junkyard & put it on da driver side. Secure seat cover with zipties. EASY INSTALL.Saw it on UA-cam, I've actually done this to my Suburban, you'll have to trim hole for seat control. See ya growing, keep on keeping on. PEACE
The bars might be different sizes. That's common different strengths in steel. As long as where they connect are the same size is what you're looking for.
I think the stuff that's off by a a inch or 2 is cause the silverado has bent parts. They're close, but if it wasn't bent it'd be the same measurement.
Could make a prop rod going from the radiator to something. Just like semi trucks. The Tahoe is probably smaller for a softer ride. I bet that bracket would fit. But $90 is cheap compared to that extra work. If you're just looking to flip it just loosen the torsion bar key lol
Okay once you release those keys okay this is how you have to do this Jack the front end up put it on jack stands release the keys get you a if you don't have one go to Home Depot and get you a 3 lb hammer 084 lb hammer what does short handle cuz you're going to have to knock that torsion bar you going to have to knock it out towards the front end of the truck once it comes loose once you know you got to release those keys first once you release the keys once you've done that then you knocked the torsion bar forward once it comes out of that book that that that that that that that that keeper you'll be able to handle it just as nice if your lower control arm is it bad or the ball joint isn't bad then don't worry about it but if the ball joints back go ahead and replace the lower control arm but you would have to do that for both sides before you can remove that CrossFit number but if you got to pay somebody to do it cross members of 90.00 Pop and whatever torsion Rod is cuz you're not going to use that bent one and get to lower control arm for 300 bucks you got a pretty good running truck put your plow on the front of that sucker and have you apply a truck
It's not going to work is the pickup has a thicker torsion bar you're going to have to replace that torsion bar and as far as the key is concerned you can still use the key but you got to replace the crossmember cuz it's been up all the Blazers but for you to try to use that other truck torsion bar it's got a match the front end as well as the rear so my advice would be either go to scrap yard or check your vehicles before you move on to see if those torsion bars are thick enough that is a Precision part even though it doesn't look like it is it is that dinner torsion bar is not going to support the weight that torsion bar is not going to support that truck because it's a different size which means you would have to change the lower control arm the torsion bar in a torsion key and you cannot have Mitch Match Parts on that suspension cuz it ain't going it's going to ride lopsided my advice you probably can use the crossmember but go get you another torsion rod I mean to go that route you must have changed everything to crossmember both tuition rods and both lower control arms remember that stuff is a different sizes and if it don't hold correctly it ain't going to it ain't going to operate correctly and you're absolutely correct about the OBS four-wheel drives they are torsion rods add a 1994 and head torsion Rod front and it was a 4 x 4 extended cab what is 305 I put 300,000 MI on a 305 I want to find a new engine but I ended up getting sick and going to the hospital for for some time and left the vehicle in front of my grandmother's house one of the neighbors took the tags off my vehicle call the police and set my vehicle was abandoned my grandmother was an old lady so therefore she was moving around the house a lot me and oh boy did have it out start to break his jaw I was a couple months getting well been doing that time they towed my truck and so did the state don't wait around for nobody but no you're absolutely right you got to keep in mind those torsion bars are calibrated to size for weight you can't put that thinner that 29 in there with that 32 you just got to go and bite the bullet and replace that 32
@@CoolCarsKJ just found out there’s at least four but probably more different ones. White, green, blue, and purple maybe more. These are the different keys
What’s up bro… man I’m in your neck of the woods and I’ve been looking for a set of six lug wheels for my 97 Nissan pickup… are you willing to let those go and what’s your price if there’s one ?
I like cloth seats over leather any day for sure!!! Easy money right there!
For that torn leather seat,just find a good passenger seat cover from da junkyard & put it on da driver side. Secure seat cover with zipties. EASY INSTALL.Saw it on UA-cam, I've actually done this to my Suburban, you'll have to trim hole for seat control. See ya growing, keep on keeping on. PEACE
bruh took off the wrong clip with the quickness
Sholl did!
Cloth seats are always the best
Always chock your wheels my man please be safe
I go with the cloth because that leather will freeze your A$$ in the winter time and burn your A$$ in the summertime 🤜🏻🤛🏻
At 8:36 you sound like me.😂 Looking at my son saying the same thing.😂
The bars might be different sizes. That's common different strengths in steel. As long as where they connect are the same size is what you're looking for.
I think the stuff that's off by a a inch or 2 is cause the silverado has bent parts. They're close, but if it wasn't bent it'd be the same measurement.
The tool that you need to relieve the tension on the torsion bars look like a c clamp but are much stronger.
I perfer cloth. You can do the torsion bar yourself. It's not hard. You have to get the pressure off the suspension
Hey put that green cateye together either sale it or another clean back up service truck/tow truck if needed
Tell Bray he ain't gonna get better walking around like it's summer time 😂
Facts! 🎯🎯🎯
lol
Getting driving straight drive it and keep it💯
We back in this thang 💪🏽👊🏽💪🏽👊🏽💪🏽👊🏽
You need me living out there. Because I swap that crap out for you so cheaply and quickly
Happy prosperous New Year my guy!!! Just rolling over to the next!!😂
Could make a prop rod going from the radiator to something. Just like semi trucks. The Tahoe is probably smaller for a softer ride. I bet that bracket would fit. But $90 is cheap compared to that extra work. If you're just looking to flip it just loosen the torsion bar key lol
Check the 1s in the back
Cloth definitely better. Maybe not as durable but way more comfortable than leather
Okay once you release those keys okay this is how you have to do this Jack the front end up put it on jack stands release the keys get you a if you don't have one go to Home Depot and get you a 3 lb hammer 084 lb hammer what does short handle cuz you're going to have to knock that torsion bar you going to have to knock it out towards the front end of the truck once it comes loose once you know you got to release those keys first once you release the keys once you've done that then you knocked the torsion bar forward once it comes out of that book that that that that that that that that keeper you'll be able to handle it just as nice if your lower control arm is it bad or the ball joint isn't bad then don't worry about it but if the ball joints back go ahead and replace the lower control arm but you would have to do that for both sides before you can remove that CrossFit number but if you got to pay somebody to do it cross members of 90.00 Pop and whatever torsion Rod is cuz you're not going to use that bent one and get to lower control arm for 300 bucks you got a pretty good running truck put your plow on the front of that sucker and have you apply a truck
And I need those seats
Bruh I see a garage in your future keep grinding.
That's the plan! I appreciate the support bro!
You should charge more for the willwells. Because those are worth money those are like seventy five bucks of peace
Oh damn. I'll know next time.
WaTaDo WaTaDo
Hey what’s up bro how are you much love let’s go #OBSGANG stand up checking in with you one love bro
It's not going to work is the pickup has a thicker torsion bar you're going to have to replace that torsion bar and as far as the key is concerned you can still use the key but you got to replace the crossmember cuz it's been up all the Blazers but for you to try to use that other truck torsion bar it's got a match the front end as well as the rear so my advice would be either go to scrap yard or check your vehicles before you move on to see if those torsion bars are thick enough that is a Precision part even though it doesn't look like it is it is that dinner torsion bar is not going to support the weight that torsion bar is not going to support that truck because it's a different size which means you would have to change the lower control arm the torsion bar in a torsion key and you cannot have Mitch Match Parts on that suspension cuz it ain't going it's going to ride lopsided my advice you probably can use the crossmember but go get you another torsion rod I mean to go that route you must have changed everything to crossmember both tuition rods and both lower control arms remember that stuff is a different sizes and if it don't hold correctly it ain't going to it ain't going to operate correctly and you're absolutely correct about the OBS four-wheel drives they are torsion rods add a 1994 and head torsion Rod front and it was a 4 x 4 extended cab what is 305 I put 300,000 MI on a 305 I want to find a new engine but I ended up getting sick and going to the hospital for for some time and left the vehicle in front of my grandmother's house one of the neighbors took the tags off my vehicle call the police and set my vehicle was abandoned my grandmother was an old lady so therefore she was moving around the house a lot me and oh boy did have it out start to break his jaw I was a couple months getting well been doing that time they towed my truck and so did the state don't wait around for nobody but no you're absolutely right you got to keep in mind those torsion bars are calibrated to size for weight you can't put that thinner that 29 in there with that 32 you just got to go and bite the bullet and replace that 32
Bray almost wrecked don’t he? 😂😂
#CoolCarsKJ I Thought You Was Going Too Used The Motor, DriveTrain, 4 BenJo Cold's Truck (?)
yes, i'll use the motor, but not the transmission. We will keep it 5 speed.
Cloth Happy New year Cool J
Measure the bar in the same exact spot to be sure
I did. I could tell just from looking at it that it was different
@@CoolCarsKJ just found out there’s at least four but probably more different ones. White, green, blue, and purple maybe more. These are the different keys
@@CoolCarsKJ I can email. You all of the part numbers.
That would be great! Coolcarskj@gmail.com
Awesome & water brush on da drill,you'll be surprised at da results
Sell that cat eye heck I might buy it lol
You really need to buy you a creeper that way you can lay on your back and move around under the vehicle without having to do the worm
🤣🤣🤣🤣 I remember the worm, thats hilarious!
Bray will get better behind da camera with time 😅
Cool cars kj what's up my man
What up bro! Happy new year to ya!
Happy new year. What type of transmission are you trying to sell
it's a 4l60e in that Tahoe
Give OBS a break 😂😂
21:24🤔👀💯
How much for the wheels and tires
How good is the Drivers seat? I would like to buy Both front seats.
Keep watching cuz I showed it
@@CoolCarsKJ oh yeah I saw it after I asked 😂 not to bad could be reupholstered.
The oem cover on eBay is like $50 for the bottom
cloth!!!
Do you have any obs sun visors in gray?
I'll have to take a look
what engine is in it?
5.3 LS
What’s up bro… man I’m in your neck of the woods and I’ve been looking for a set of six lug wheels for my 97 Nissan pickup… are you willing to let those go and what’s your price if there’s one ?
Mannn, these escalade wheels look amazing onnthkse Nissan trucks. I have 2 sets, I may sell a set. These are my favorite 6 lug wheels
@@CoolCarsKJ cool, I’m going to hit you up on instagram to see if we can set something up… preciate your response bro..
how bout them dawgs lol
Them Dawgs is hell! #GoDawgs
Cloth
How to buy a new crossmember😊
Just do it yourself is easy to do
Sale one court supports off of one of them in the backyard escalades
Are they the same?
@@CoolCarsKJ what year are the ones in the backyard they should be the same
🔥🔥🔥🔥🫡
if he bought them for that truck they are differnt!!!!
No, his wife has a Tahoe that she wrecked. The same color, he got lucky!
Man stop playing around go to Is harbor freight and go get you a pack of safety glasses .
U might as well start doing a daily vlog
You think i should? i can't see doing it daily. tooooo much work , lol
@@CoolCarsKJ at least every other day
that bar is not as wide as a truck i dont thank