I had a similar error code.. mine was C6 L. I took off bottom of pot.. found the pressure sensors, and turned both Phillips screws 1/ 4 turn. Pot fixed! Simple as that. Didn't have to replace anything
Don't buy sensors just yet. Our Insta pot was used half a dozen times before the C6L Error code appeared. We located the 2 metal sensors. Unscrew the Phillips screw located between them. Lift up the sensors and there are 2 more tiny copper button sensors located underneath. Clean all 4 sensors with rubbing alcohol and toothbrush. Appears moisture buildup is causing the problem. Reassemble. Works great for us. Good luck.
amazon, search for "Electric Pressure Cooker Pressure Sensor or Switch Works with Instant Pot, Power Cooker, Cuisinart, Farberware, Power Quick Pot, Crock-Pot"
Hi, i have an Instant Pot duo crisp + air fryer error code c6h/ c6l. It appears even after replacing the pressure sensor just like you show in your tutorial. The error appears when i insert the pot in, otherwise it does not alert it. Any suggestions what might be the cause and a possible solution?
Thank you for this wonderful video. I have an ultra 60 model and I m having the same error. When tried to pull the red wires they don’t come off at all. What is my option here? Can I use plier to pull it?
Thanks for the video. The Amazon part description reads: "Caution: This pressure sensor is a generic part. After installation, it needs to be calibrated to reach safe and appropriate cooking pressure. It is the buyer's responsibility to ensure that both the installation and the calibration need to be done by experienced professionals such as licensed electricians to avoid bodily harm and property damages." Is calibration necessary? I don't want to blow up my IP.
Yes, it is recommended to be calibrated. I did not even know that we had to do it when I bought the sensor. I've been manually monitoring the valve when cooking because i don't know how to calibrate it.
Hola, les paso el link del sensor como el del video en amazon: ZoneFly Sensor de presión original para olla instantánea, sensor de presión o interruptor para olla eléctrica/Cuisinart/Farberware/Power Quick Pot/Crock-Pot Sensor de presión o interruptor
I had a similar error code.. mine was C6 L.
I took off bottom of pot.. found the pressure sensors, and turned both Phillips screws 1/ 4 turn. Pot fixed!
Simple as that. Didn't have to replace anything
Thank U Stephan for an informative lesson
Thanks for making the video, I was able to get my instant pot to work again! Just in time for bò kho season!
Thanks for sharing really helpful 👍 you're good.
You are my hero. Thanks a million as your video is so very helpful. I fixed my instant pot with your help. Thanks again
Cam on ana nha
I see your response most down. Thank you very much!!
Don't buy sensors just yet. Our Insta pot was used half a dozen times before the C6L Error code appeared. We located the 2 metal sensors. Unscrew the Phillips screw located between them. Lift up the sensors and there are 2 more tiny copper button sensors located underneath. Clean all 4 sensors with rubbing alcohol and toothbrush. Appears moisture buildup is causing the problem. Reassemble. Works great for us. Good luck.
It was quite helpful, thank you!
Thanks for this video! It is very helpful! Where did you buy the replacement part? Do you have a link?
amazon, search for "Electric Pressure Cooker Pressure Sensor or Switch Works with Instant Pot, Power Cooker, Cuisinart, Farberware, Power Quick Pot, Crock-Pot"
Hi, I have an instant pot max and I cannot press the pressure cook or saute option. The other options work fine. Any suggestion?
Hi, i have an Instant Pot duo crisp + air fryer error code c6h/ c6l. It appears even after replacing the pressure sensor just like you show in your tutorial. The error appears when i insert the pot in, otherwise it does not alert it. Any suggestions what might be the cause and a possible solution?
Thank you for this wonderful video. I have an ultra 60 model and I m having the same error. When tried to pull the red wires they don’t come off at all. What is my option here? Can I use plier to pull it?
If you don't see led around the connection, you should be able to pull it with plier. Don't squeeze it too hard though as it may deform the connector.
There is a pin you need to press to get it off completely
Are both sensors susposed to click after you install it? The high pressure sensor seems to be so tight that it does not click.
Good afternoon Stephan, what is the number part of that piece? Whwre can i get it? I am in México city. Best regards
Where i can bought a new sensor ?
You are so cool, how did you do that!!
Thanks for the video. The Amazon part description reads: "Caution: This pressure sensor is a generic part. After installation, it needs to be calibrated to reach safe and appropriate cooking pressure. It is the buyer's responsibility to ensure that both the installation and the calibration need to be done by experienced professionals such as licensed electricians to avoid bodily harm and property damages." Is calibration necessary? I don't want to blow up my IP.
Yes, it is recommended to be calibrated. I did not even know that we had to do it when I bought the sensor. I've been manually monitoring the valve when cooking because i don't know how to calibrate it.
You should also cook something and test if your InstantPot work or not?
Hola me puedes ayudar a reparar mi olla expres porfabor le sale en la pantalla C6H PORFA 🙏
Hola, les paso el link del sensor como el del video en amazon: ZoneFly Sensor de presión original para olla instantánea, sensor de presión o interruptor para olla eléctrica/Cuisinart/Farberware/Power Quick Pot/Crock-Pot Sensor de presión o interruptor
Ghostly voice at around 5:17
Anh mua pressure sensor o noi nao vay? Co the cho em address. Cam on nhieu.
Amazon á chị
@@stephand5030 Cam on