Showing us the end result with the seat cleaned and dried. Having the comparison at the end BEFORE/AFTER would have made this video 100x more satisfying. 😢
If you were using a professional extraction tool. You should be able to dial down your water pressure. Definitely soaking that seat with too much water.
Saturating fabric with water makes the stains disappear, but they will show when it eventually dries out, probably causing mold in the process. The amount of liquids being used in these cleaning videos is ridiculous.
All that water that he uses, also makes its way further down into the foam within the seat. So when he uses his extractor to extract, it’s not getting everything. Eventually leading to the foam rotting.
@@faithstormer1976 I have been pressure washing seats literally taking them out putting cleaner on and pressure wash it and never had mold! I dried it then used seat cleaner to remove stripes and smells.
I'm not sure how long you have these cars for, but what I do after deep cleaning seats in a car is I stick my heavy duty de-humidifier in the car and just close it up. After a couple of hours things are generally bone dry. with moisture levels at 25-30%.
Got to cover the center console ect ect. You're just creating a mess for your self because of the over spray. Imagine it's a hot day and all the that overspray goes everywhere and it's going to etch in. Gl after that.
@@mohammadnurfiqri2831 because a lot of dirt is under the upholstery (sponge acumulate much more old dirt)...and if you use too much water the dirt that comes out is from that sponge
@@Belta420 my friend...you should know that ectractor isnt for removing water from the foam... The key to extract properley is trying to remove dirt and stains from material not from foam... If the foam is full of old dirt the best way to make it look clean again is give it to upholsterer who will renew whole seat... It this case extraction will be endless and dirt will be coming out again and again...
Used to much chemicals on the seat. That extractor didnt get it all out. Gonna have chemical and water stains when it dries. When you dont get all the chemicals out of the fabric, over time its gonna weaken the fabric and it'll become brittle after awhile.
The dirt kept coming because of the amount of water used. Not necessarily because it was super dirty but the amount of water diluted the dirt that was there so much that it took forever to extract all of the water and ill be theres still moisture in the cushion
@@natalied662By doing exactly as the video said, but also taking this user's advice. Do not let the machine use that much water. That way the dirt doesn't keep sinking down with the water. Also, idk that 30 minutes is considered that much time. Still, if he did it in 30 the way he operated, he could have done it in 15 mins or less if he used less water. It's like the difference between drenching a floor with water to clean it, vs using a towel or a mop to control how much water is used at a time, so you don't spread dirty water everywhere.
@@Lexartm TC Autopflege, Fahrzeugpflege Laabs. Two of multiple that include this in their packages. These weren't even on page 1 of the search, there was plenty before that.
Easier way! Just remove the cover from the foam seat and wash the entire thing. If you don't know how to remove the factory seat fabric/leather, get the factory service manual. Otherwise you'll never get it completely clean & the foam underneath will be wet. For a long long long time..
Oh yeah, for leather I would recommend a horse hair brush. Soft enough where it won’t damage the leather and it gets in those nooks and crannies in the stitching
If you want to accept the liability for being the last one to take out the seat for no reason, best of luck in court. When the seat comes loose in an accident or an air bag wasn't properly connected or went off accidentally. It's at least $2,000+ for a new one, and that's if the person isn't injured from it going off. The customer blame always goes to the last one who touched something.
Horrible way way way to much water. Shit u said the seat has never been clean hv u ever used an exstractor? 30 minutes on a seat that shldve took 10 minutes 😮😮😮😮😮😮😮
I assume you guys are so rich. This is not the worst car seat. My seats came with roaches. And very bad in that I just drive coz it’s what I could get. Lol.
The cleanest construction worker seat
That is true
I was about to say that looks like half a days worth of work 😂
Which steamer extractor i should buy starting new work
You can get the same results by leaving all your windows open at the car wash.
i’d love to see how that works out
You made that all the way up 😅
Lmao
I want to see your cars state 😂
@@whybearereuploded3474a broken toy lmao
Showing us the end result with the seat cleaned and dried. Having the comparison at the end BEFORE/AFTER would have made this video 100x more satisfying. 😢
Id agree
If you were using a professional extraction tool. You should be able to dial down your water pressure. Definitely soaking that seat with too much water.
Saturating fabric with water makes the stains disappear, but they will show when it eventually dries out, probably causing mold in the process.
The amount of liquids being used in these cleaning videos is ridiculous.
All that water that he uses, also makes its way further down into the foam within the seat. So when he uses his extractor to extract, it’s not getting everything. Eventually leading to the foam rotting.
@@faithstormer1976 I have been pressure washing seats literally taking them out putting cleaner on and pressure wash it and never had mold! I dried it then used seat cleaner to remove stripes and smells.
I noticed this and I’m literally a beginner
@@SirArghPirateyou’ve never detailed a day in your life 😂
Thanks, that’s exactly my case😅👍🏼
I'm not sure how long you have these cars for, but what I do after deep cleaning seats in a car is I stick my heavy duty de-humidifier in the car and just close it up. After a couple of hours things are generally bone dry. with moisture levels at 25-30%.
Got to cover the center console ect ect. You're just creating a mess for your self because of the over spray. Imagine it's a hot day and all the that overspray goes everywhere and it's going to etch in. Gl after that.
What is the name of the vaccum cleaner u used after the drI'll brush
its an extractor vacuum, I use the Hoover HV14000 and it works really good
Maybe there was so much dirt cause you used too much water during extraction? If you wet the sponge under upgolstery its hard to do it correctly👍💪
How does that increase the amount of dirt?
@@mohammadnurfiqri2831 because a lot of dirt is under the upholstery (sponge acumulate much more old dirt)...and if you use too much water the dirt that comes out is from that sponge
@@Autohigienathen maybe you need to might as well put it in washing machine the whole chair
@@AutohigienaAnd thats why he uses the extractor to remove it from the foam
@@Belta420 my friend...you should know that ectractor isnt for removing water from the foam...
The key to extract properley is trying to remove dirt and stains from material not from foam...
If the foam is full of old dirt the best way to make it look clean again is give it to upholsterer who will renew whole seat...
It this case extraction will be endless and dirt will be coming out again and again...
Used to much chemicals on the seat. That extractor didnt get it all out. Gonna have chemical and water stains when it dries. When you dont get all the chemicals out of the fabric, over time its gonna weaken the fabric and it'll become brittle after awhile.
Should he have skipped the soap and drill brush then ?
The dirt kept coming because of the amount of water used. Not necessarily because it was super dirty but the amount of water diluted the dirt that was there so much that it took forever to extract all of the water and ill be theres still moisture in the cushion
So how do you do if correctly ? The only tool I have is a green machine bissel
@@natalied662ong
@@natalied662By doing exactly as the video said, but also taking this user's advice. Do not let the machine use that much water. That way the dirt doesn't keep sinking down with the water. Also, idk that 30 minutes is considered that much time. Still, if he did it in 30 the way he operated, he could have done it in 15 mins or less if he used less water. It's like the difference between drenching a floor with water to clean it, vs using a towel or a mop to control how much water is used at a time, so you don't spread dirty water everywhere.
Mold has entered the chat
1 month later this hit me😂😂😂😂😂
Extracter
Good job brother.
I love how all new Zealand men sound the same
thanks for kicking some knowledge
Wouldn’t bother, the slobs will get it dirty again in half a day
Thanks to be to honest👍🏼 spending 30 minutes just one seat
It looks like you do a great job.
Literally not a single Business in Germany that offers this
Unbelievable! You could make a mint! X
I'm from the UK, and all I did was google Germany Car Detail and the first 40 results all did it as part of their package.. You okay? XD
@@Sir-Banename two. I'm from the 4th biggest city in Germany and I can't find a single one
@@Lexartm TC Autopflege, Fahrzeugpflege Laabs. Two of multiple that include this in their packages. These weren't even on page 1 of the search, there was plenty before that.
Might be the fact you used a car shampoo instead of an APC that dirt kept coming out. A well worked APC would that dirt out within a round or two.
“the suh-eet”
Quick question what product did you spray on the seat
What’s the seat cleaner degreaser you use ?
How do you dry the sea especially if you need to drive the same day or the next day ?
What shampoo do you use ?
I’m pretty sure the seat has never been cleaned before
Sir like 99% of cars have never had this treatment clean
great tips thanks!
Bro didn't show the results-
I'm a construction worker watching this instead of cleaning muddy knee marks, and spilled lunch/screws out of my truck.
What brush do you use
When you got micro suede😔
i need my care detailed but damn i dont know about dropping $300. the previous owners did not treat her well
Do you disconnect the batter before you detail the interior?
No not normally
Dirtiest seat?!? I just bought an escape for my dealership that has 18” of mold up the rear seat. I’d love to have this “dirty” of a seat!
What kind of car seat extractor do you use?
So I’m tryna start my own detailing business where would I get these products at
How do you know you’re not getting water in the cushion?
How can he not say what brush/machine we should buy. 😅 Im looking for machines now.
What steamer/vacuum model is that?
Does it dry after washing?
I wonder if his seats smell like mildew or mold now
Do you have a link for your vaccume
where can i get that sponge for the drill??
How do u do it with out an extractor??
Does any auto cleaner use a vacuum with a rotating brush or a wider nozzle
Which brand vacuum is this?
Seat covers 😂
What brush was on your drill ?
Hi nice video, do you use the clients electricity and water? Im looking to start my business and I don’t know what to do
Yes I do!
Like a mess 😮
the first thing you should do is take the seat out of the car
No. Too much liability.
How long takes for all seat?
I deep clean whole car in 45 min.
Use dewalt drill its lighter
How much does this usually cost?
How you dry it after?
“mytee lyte heat extractor”
On a warm day, the whole seat would dry fully in a couple of hours.
What machine is that ?
An extractor
@@bonn0077what brush is that bro i need to get one and what spray thsnks
What if you have heated seats.
What's the name of the extracting machine
Easier way! Just remove the cover from the foam seat and wash the entire thing. If you don't know how to remove the factory seat fabric/leather, get the factory service manual. Otherwise you'll never get it completely clean & the foam underneath will be wet. For a long long long time..
Use an air compressor
What’s the extractor called?
Drill brushes are mad hey!
Did you use a didgeridoo after that? 😊
Leave ot wet for 15 min ans extract it.
How long did I it take to for the seat to dry after extracting?
It doesn’t usually take long, especially using a hot water extractor such as a mytee, ide say about an hour with doors open
@@mr.detail6527 😒 not with that much pre spray,that water after it exits the water jet is only about 70 degrees,i would say a nice 2-3 hours
Why didnt you remove the seat out from the vehicle
what is the vaccume?
Come thru i have my co-pilot seat (a.k.a my dogs seat )
Would make a good video 😅😂😂😂
30 minutes on 1 seat?? I don’t see the profit on this!!
U did more mess to the couch and should have covered the cabin part
Which cleaner you are using? It is not karcher. Sabrina maybe?
What extractor do you use?
Mytee
Crikey! That looks great 👍
No finished product? No share
What is that extractor??
Mytee
Doing it wrong, you are spraying too much water while extracting
What vacuum ru using for this?
That’s an extractor. You can buy it. Usually $500 or build one from a regular shop vac
👍👍👍💪💪💪
Does the drill brush ruin the seat at all ??
Oh yeah, for leather I would recommend a horse hair brush. Soft enough where it won’t damage the leather and it gets in those nooks and crannies in the stitching
Do I need to use an extractor? What would I do if I don’t have one?
You can use a carpet cleaning chemical, agitate with a brush, and then just vacuum
@@autoclean thank you
@@autocleanwhat brush is this bro and spay
Why you guys don't use leather seat covers? Just wipe it with wet clothe and good to go..
COOL DUDE!!!!!
Thank you 😊
Wich carpet shampoo
Nah. You took 30 minutes because of the ridiculous amount of water you chucked down from your extractor 🤣😂. What a novice haha
Doesn't remove seats, sprays carpet cleaner all over the cabin, let's it dry for 30 minutes. Calls himself professionnal.
He never mentioned he was a professional, he also never said how long he let it dry for. Hater 😂 Go upload your own cleaning vids
If you want to accept the liability for being the last one to take out the seat for no reason, best of luck in court. When the seat comes loose in an accident or an air bag wasn't properly connected or went off accidentally. It's at least $2,000+ for a new one, and that's if the person isn't injured from it going off. The customer blame always goes to the last one who touched something.
Looked wet
Horrible way way way to much water. Shit u said the seat has never been clean hv u ever used an exstractor? 30 minutes on a seat that shldve took 10 minutes 😮😮😮😮😮😮😮
I assume you guys are so rich. This is not the worst car seat. My seats came with roaches. And very bad in that I just drive coz it’s what I could get. Lol.
you just dirty 😭
Not that dirty
🫡🫡🫡
Way too much water being used. Good lord. Ill just leave my windows down during a carwash
Link or describe the tools your using please?