You’ve helped me tremendously! I try to catch all of your videos to sharpen up on my skills anyway I can. Very talented tinter it’s nice to watch. Keep it up!
Dude you’re a big help. I turned for a couple years and started in 2010. Was trained for 2 weeks by a LLumar rep. Loved it. This is while I was a technician at a dealer. Haven’t touched it until I sold a car in 2018, I had to do the driver window due to a scratch. I did pretty good. I miss it and just got a new to me car and I’m going to jump back in and tint the whole car myself. There is a lot of satisfaction tinting windows. Not only the looks, but knowing you are protecting the interior and also the occupants in the vehicle from Uv rays is awesome.
@@chrisdenicola4336 definitely not the best to answer this, depends a little on ambient temp and how much you want it to slip, here in Arizona I use about 5-6 drops of baby soap to 1liter of water
Being a car wrapper for over 10 years now, i gaved couple of shots for window tinting like 4-5 times, 2 times i start all over again because of the "fingers"....3 times i've sucessfully done it perfectly without any guides. Now there are some windows that are going to be a nightmare without watching such an informative video, as for me i would never do two tints on the same time haha, to hard for me! The longer way of tinting is my pref one, i just don't have that feeling on hands to pull the tint for streching, so i choose the safe way, that being said i like when you show more then one type of tinting, thanks for that video!
interesting, thanks for sharing this video. working smart, not hard by cutting two films at the same time. Got my first tint lesson today at a local garage
If you can an old sliding glass door work great for a glass board in the shop. I had mine made out of 2x4s and on casters so I could roll it around. Also had the long side parallel to the ground so it was like 7 foot wide for large wimdows
Probably a dumb question, but is it straight water you use to install the tint? I always see these videos saying they use water with soap. Thanks again man, I’ve learned a lot from your videos! 🙏🏾
I ordered a fusion blade from you. And for being the most expensive blade out there. They cut it like crap. I know it doesn't effect the blade itself. But the ends are cut crooked. For the price you would expect better quality
Iasked a question some time back on pricing. Man i would totalh go with you in a instant. Your informative. Get the job done pretty fast. Clean sharp and homest guy.. the shop i got my cars done.. they are a 7.5 the guy has experience.. but even with his girl helping out for scheduling and ao on. He still takes at least 4 hrs or so each car. And has more space then this.. have 5 cars waiting and approved.. but man.. reasom i even want my own timt is not to do business.. but rather to get it here in the usa amd do it myself in Mexico.. once the truck is fixed windows and all i well get all cars ceramic And do my own here.. well take some practice but with your information and knowledge i know its possible.. thanks man for this video..
Let's make the seal guard tape thinner so we could get double the use out of it..... I have been splitting my tuck tape in half cuz the role is wide and I get more out of it....
Can I use a hairdryer as a heat gun? I’m trying to do a couple windows and maybe do a couple cars but I don’t wanna get the full set up and just looking for an alternative if I can to not spend as much money.
Hey fam, I used to watch your live all the time a few yrs back. Also was in the fb groups. It’s been some time now but, I was wondering what kind of film you all recommend for a beginner? I’ve done cars before using Lexen, mostly family. Thanks I’m advanced
idk how your tint slides so well, i just started and got lexen and tint slime and tint likes to grab the glass right away and makes it hard to position and tuck the bottom because i have to peel it off the glass. who knows maybe im just doing it wrong
I’ve been having the same issue and I’ve learned that baby shampoo is the way to go if you get specifically, the yellow bottles of the Johnson and Johnson, baby shampoo, tier free those have very little chemicals so whenever you’re done applying to tint, it doesn’t have any weird slicks of chemicals that is all over the window that hard to get off and it is also super slippery all it takes is 32 ounces of water and four squirts of baby shampoo out of a bottle. Hope this helps
I installed new window tint and there is marks on inside from like squeegee do they come off or was there a problem installing I cleaned window 2 3 times used a razor blade to clean the first time can someone help first time doing this
Really love how informative you are with your videos. I just got into tinting and placed a order on your page today, keep up the great work
You’ve helped me tremendously! I try to catch all of your videos to sharpen up on my skills anyway I can. Very talented tinter it’s nice to watch. Keep it up!
Q
👍
awesome Explanation! Glad you mentioned Stainless steel Knife, I made the mistake once of not using those and ended up scratching my windows..
You could also use the other knife Js gotta hit it light
Dude you’re a big help. I turned for a couple years and started in 2010. Was trained for 2 weeks by a LLumar rep. Loved it. This is while I was a technician at a dealer. Haven’t touched it until I sold a car in 2018, I had to do the driver window due to a scratch. I did pretty good. I miss it and just got a new to me car and I’m going to jump back in and tint the whole car myself. There is a lot of satisfaction tinting windows. Not only the looks, but knowing you are protecting the interior and also the occupants in the vehicle from Uv rays is awesome.
I’ve done 3 cars by watching and leaning from you. I even successfully did splice tinting on back window with 20” roll.
That’s dope 💯💯😊
Hey quick question, only because I come from a vinyl background.. so u use the same slip and tack solution? What is the dilution and type of soap?
@@chrisdenicola4336 baby shampoo in water. Johnson's or I sometimes use cheap one from dollar tree.
@@chrisdenicola4336 definitely not the best to answer this, depends a little on ambient temp and how much you want it to slip, here in Arizona I use about 5-6 drops of baby soap to 1liter of water
Being a car wrapper for over 10 years now, i gaved couple of shots for window tinting like 4-5 times, 2 times i start all over again because of the "fingers"....3 times i've sucessfully done it perfectly without any guides.
Now there are some windows that are going to be a nightmare without watching such an informative video, as for me i would never do two tints on the same time haha, to hard for me!
The longer way of tinting is my pref one, i just don't have that feeling on hands to pull the tint for streching, so i choose the safe way, that being said i like when you show more then one type of tinting, thanks for that video!
I watched this video again to see what I was doing wrong and I ended up fixing my mistakes. love the content dude
New here to the tinting world just watched your 2023 tool video and was curious if you can add soap to your tint keg? Or do you use something else?
This was one of the best videos ever thanks for the info man
interesting, thanks for sharing this video. working smart, not hard by cutting two films at the same time. Got my first tint lesson today at a local garage
If you can an old sliding glass door work great for a glass board in the shop. I had mine made out of 2x4s and on casters so I could roll it around. Also had the long side parallel to the ground so it was like 7 foot wide for large wimdows
Just watching your video Mate i learned alot thank you so much for all the tips
Nice and clean way to do it, love it 🫡👌🏻
Probably a dumb question, but is it straight water you use to install the tint? I always see these videos saying they use water with soap. Thanks again man, I’ve learned a lot from your videos! 🙏🏾
Baby shampoo works wooooonders!!
Lol, this video caught my eye cuz I just bought a 2024 Sierra AT4 and want to tint the windows. Factory tint in the rear and none in front.
I ordered a fusion blade from you. And for being the most expensive blade out there. They cut it like crap. I know it doesn't effect the blade itself. But the ends are cut crooked. For the price you would expect better quality
I love this handle too buddy😂😂😂❤❤❤❤❤
Thank you for this video 🙏🏼
What do you put in the most solution? Johnson & Johnson Baby Soap and Water? Isopropyl Alcohol & Dawn/J&J Baby Soap I’m very curious. Thanks!!
Nice, where do i get the door panel and the sealing tapes.
How long should you wait until rolling down the windows? Also, can this be done in the winter months outside?
48-72 hours until you can roll the windows down
What’s the name of the door panel guard and where can I pickup some? Thanks
Nice work but how can I get the complete tinting tool sir
Best and easy explanation...
Iasked a question some time back on pricing. Man i would totalh go with you in a instant. Your informative. Get the job done pretty fast. Clean sharp and homest guy.. the shop i got my cars done.. they are a 7.5 the guy has experience.. but even with his girl helping out for scheduling and ao on. He still takes at least 4 hrs or so each car. And has more space then this.. have 5 cars waiting and approved.. but man.. reasom i even want my own timt is not to do business.. but rather to get it here in the usa amd do it myself in Mexico.. once the truck is fixed windows and all i well get all cars ceramic
And do my own here.. well take some practice but with your information and knowledge i know its possible.. thanks man for this video..
Let's make the seal guard tape thinner so we could get double the use out of it..... I have been splitting my tuck tape in half cuz the role is wide and I get more out of it....
Brother you are great 👍 👌 your vedio always help us as a beginner
Should you shrink tint you get from Walmart or oreillys?
Thank you!
Great work and tutorial. Thank you
What tint do you use and where can I get it ? By the way good content 👍
I'm curious if a synthetic clay bar would also do the job for cleaning the inside window. It's reusable, and if dropped can be rinsed.
What is the solution ratio that you recommend to use
3
313tint.com
Your prices are very reasonable. Do you ship to the UK? I just opened my shop. Just getting started 😐
Good I like your work
Awesome job
I’m thinking about starting a tinting business is there any info I need before I start?
Thanks… 😎 the right tools will make it easier to install
What is the easiest window tint Brand to shrink? What do you use or like? Thanks.
what flooring did you use? where did you get the floor tiles?
That shrinkingnpart is where im still confused. When to stop i guess?
Hi ,where can I buy this tools ?😊
Thank you for teaching us sir
Can I use a hairdryer as a heat gun? I’m trying to do a couple windows and maybe do a couple cars but I don’t wanna get the full set up and just looking for an alternative if I can to not spend as much money.
Is TintX a good tint film. Looking to tint my vehicles (4) for practice
I just order my tools yesterday!
great video
Hey fam, I used to watch your live all the time a few yrs back. Also was in the fb groups. It’s been some time now but, I was wondering what kind of film you all recommend for a beginner? I’ve done cars before using Lexen, mostly family. Thanks I’m advanced
커버링테이프를 구매하고싶은데 한국이라
쉽게 구매할수있는 방법이 있을까요😂
Do you have to shrink tint strips?
Where can I get good quality window film?
What size is the roll of tint your using brother
You can cut straight lines free hand
Would it be easier to remove the window and tint it?
Giving yourself more work for reason
hi, could you give me some advice on how to glue the film to the silk screen?
For some reason I can’t do any tint job without panel popping
about how many cars can you do with 1 door panel guard roll
I have surgeon scalpels to cut the film will that work?
Where does he stream?
When do the live streams come back
I want to buy covering tape, but it's in Korea.
Is there an easy way to purchase it?
They have the painters roll that used for painting I'm sure there's a
Paint store in Korea I'm in Cali so I'll usually go to home depot or Lowes
can you do a 03 ford ranger ex cob
Any recommendations on where I can buy good window tint online in Canada region?
hi I have the same problem have you found anything yet?
When will you do lives again?
Slick work
I see the 313 store doesn't sell the blue max squeegee
idk how your tint slides so well, i just started and got lexen and tint slime and tint likes to grab the glass right away and makes it hard to position and tuck the bottom because i have to peel it off the glass. who knows maybe im just doing it wrong
I’ve been having the same issue and I’ve learned that baby shampoo is the way to go if you get specifically, the yellow bottles of the Johnson and Johnson, baby shampoo, tier free those have very little chemicals so whenever you’re done applying to tint, it doesn’t have any weird slicks of chemicals that is all over the window that hard to get off and it is also super slippery all it takes is 32 ounces of water and four squirts of baby shampoo out of a bottle. Hope this helps
@@Jynxzihightlightshow many ounces is a squirt
@BeepboppBeep-jv1od a squirt is just a bottle squeeze. Like how much youd use to shampoo some hair. Doesnt have to be exact
@ TintStudio
Hi,
From which countru r u?
14:00
Why not at least show the Finished job damn! You could have just showed it for a couple seconds at the very end.
Can anyone tell me what video recording gear he’s using? I record my installs but they are never as smooth. Mine are all shaky. Thanks in advance!!!
Currently in training, I am Struggling with cutting the film.
Nice working
What do you use for your slip solution?
From what I've seen, a lot of people just use baby shampoo and water.
Johnsons baby shampoo (no scent) about 6 or 7 pumps in a 32 oz spray bottle...if it's hotter I'd try 7-9 pump. If bottom loading do 10
I installed new window tint and there is marks on inside from like squeegee do they come off or was there a problem installing I cleaned window 2 3 times used a razor blade to clean the first time can someone help first time doing this
Just cut edges with scissor. Fast and simple.
Nah cause they like it hard...
Nice sir I'm indain country I also wok in india
Spero che sia tutto ok Matt...
È da tanto che non ti vedo🙏
Lmfao any razor blade you want … *grabs carbon razor blade*
Hello. Im from indonesia. I dont speak English . Please subtitles indo🙏🏻😁