I understand a little bet of Polish and you have The qutest Daughter :) GOD BLESS HER, and for everything you do for all of us. Love your channel and the work you do...:)
Oh that looks decent for the wind that day. Would you be able to give a measurement for CG? I just finished one of mine as a 1s build at 45-55g auw dependent on battery and was going to maiden tomorrow. I haven't seen any other builds of these yet. I may even try an 18650 that puts it at 85g auw weight I think it would fly based on iforce2d's 450mm wing with the same motor I'm using flying at almost 100g for over 30 minutes with battery to spare. I could probably push 45 min to an hour out of a 1s sub 100 gram wing and there would likely be enough weight to spare for a 16x16 fc and bn-180 gps on the second build.
Did you try the 18650 battery on it? I was thinking on the same thing. However, I think it's not possible to power up the FC from just 1S. It might be possible with a voltage regulator like small powerbanks include or with a level shifter.
@@JaviRP97 They have 1s specific boards with a boost regulator onboard that are good for around 2.5v in my experience. I wasn't able to get it working well on an 18650 I just thought it was too heavy I was also having thrust angle problems though and haven't tested it with the 18650 since fixing that.
@@thirtythreeeyes8624 Wow, thanks for that quick answer! What board were you using with GPS and so on? As far as the battery, I'll try one 18650 on my Multiplex Fox (that will have problems with weight too) and I needed that regulator because the Rx doesn't support that low voltage. That's why I'm so curious about your FC. Cheers!
@@FPVUniversity My friend got a DF mini spirit PnP without a manual, so he doesn't know the COG position or how to set the stabilization function in the FC.
To Pan jesteś z Polski? Could you please recommend some chat/site whatever to find out mates in drone flying. Or some advice how to find out good place to fly?
A while ago I made a 1/2 scale Flite Test Arrow with 3mm depron, that is also 45cm wingspan. I was surprised how good it flew. I always thought less than 1m wingspan is not flyable, which probably was true back in the NiCd and 40Mhz days. But if it is light enough you can go way smaller.
Hi ! I like it think this wing is a bit too tiny and still have too much weight with these components. So, it flys fast but not long and it cannot glide whatsoever. I built one with a slightly bigger EPP wing (55 cm) and it really flies better with a CC3D nano controler, even with FPV (TX03 and a better 120 deg tiny camera). So, just saying that 55 cm is the ideal size for that. Oh, and I forgot : it's very quiet with a 5000 kV + 3 bladed 3 inch prop.
Lots of 16X16 boards out there, but none that I can find to support iNav with enough uarts to support a baro gps, and mag. But..... Matek F411 ltd will work
Hello Sir, i recently made a flying wing build just don't know what is the issue. the CG is well balanced.. everything is fine, but it just goes like this, Please take a look into the video ua-cam.com/video/3HP7DFw8CIE/v-deo.html It just goes on roll and flipps. It is on full manual, but it just flips without any remote inputs i Tried to move the CG bit forward and backward, but it made it worst. i just don't understand what is wrong with it. Can anyone guide me with it?
this looks great! I have one of those LDARC wing things with it's semi-auto launch mode for noobs like myself, but the motor has always got incredibly hot from the start and now it is falling out the air for some reason :( These sized planes are really twitchy for my clumsy quadcopter hands lol
Tiny Flying Wing ua-cam.com/video/tU2joJblprg/v-deo.html
6:04 Is she asking "What are you saying?" lol
What a mad little wing, sounds like a dentists drill!
Lol, perfect comparison
In this electronic configuration I use on 1104 7500kv brushless motor 2.5inch propeller with this battery 300mah
Its perfect! I love this form factor
I understand a little bet of Polish and you have The qutest Daughter :) GOD BLESS HER, and for everything you do for all of us. Love your channel and the work you do...:)
Thanks mate
Where the CG would be for this plane? Look like there isn't manual and no CG marks
did you ever figure this out?
@@GatherKrelt I use the front side of the servo bay as the CG mark. works ok for my setup
@@FlyByWireC thanks! I found a comment that said 80mm from nose. That jives.
@@GatherKrelt Have a nice flight！
When she is 13 I hope she still goes out and flies with DAD.
and i thought my 230g wing was light😂 nice video👍
Oh that looks decent for the wind that day. Would you be able to give a measurement for CG? I just finished one of mine as a 1s build at 45-55g auw dependent on battery and was going to maiden tomorrow. I haven't seen any other builds of these yet.
I may even try an 18650 that puts it at 85g auw weight I think it would fly based on iforce2d's 450mm wing with the same motor I'm using flying at almost 100g for over 30 minutes with battery to spare. I could probably push 45 min to an hour out of a 1s sub 100 gram wing and there would likely be enough weight to spare for a 16x16 fc and bn-180 gps on the second build.
ae01.alicdn.com/kf/H9dc42aaab3c74022ab2aad10a5f69509I.jpg
@@FPVUniversity Awesome, thank you man.
Did you try the 18650 battery on it? I was thinking on the same thing. However, I think it's not possible to power up the FC from just 1S. It might be possible with a voltage regulator like small powerbanks include or with a level shifter.
@@JaviRP97 They have 1s specific boards with a boost regulator onboard that are good for around 2.5v in my experience. I wasn't able to get it working well on an 18650 I just thought it was too heavy I was also having thrust angle problems though and haven't tested it with the 18650 since fixing that.
@@thirtythreeeyes8624 Wow, thanks for that quick answer! What board were you using with GPS and so on? As far as the battery, I'll try one 18650 on my Multiplex Fox (that will have problems with weight too) and I needed that regulator because the Rx doesn't support that low voltage. That's why I'm so curious about your FC. Cheers!
Please send me a link to download the DF mini spirit manual. I especially need instructions on how to set up FC. Thank you very much.
What kind of manual? I'm not aware of any document from the manufacturer
@@FPVUniversity My friend got a DF mini spirit PnP without a manual, so he doesn't know the COG position or how to set the stabilization function in the FC.
What is the thrust of this motor which you use of this delta wing
To Pan jesteś z Polski? Could you please recommend some chat/site whatever to find out mates in drone flying. Or some advice how to find out good place to fly?
What were the PID gains for this?
The secret to a good flight is a good copilot. Happy Father's Day!
that little girl was so excited to be hanging out for some flying haha
HAHA! Brilliant! That little guy is almost as lively as your assistant 😉
Flying 2 and a half bags of crisps in wind. Great job !
should have put inav on it i did its great fun
Com?
Can't wait till your son can fly that will be fun to see.
Fantastic flying, Pawel!!! Really nice! 😃
Looks like a great little wing!!!
Stay safe there with your family! 🖖😊
Cog?
Such a graceful crash
You should have your cute little assistant with you more often!
I wonder if those V bends in the control rods or slack in the control horn holes are causing it to bounce around like that.
What esc do you use in your build I have the same but somehow struggle to find a fitting esc that fits the setup
You take way too much risk during flight. Why not gain more altitude and prevent those low to the ground manouevres?
I love the sound of that little 1104 screaming. It's unusual to see one on a fixed wing aircraft.
The best moment in the movie - "Tata leć !"
So tiny and also.. quite fast! How you can fly that LOS beats me. Well done Pawel.
Sorry Matek F411 SE it has a baro, and everything needed including a baro for iNav, but it's 20X20
www.mateksys.com/?portfolio=f411-minise
Hello! Very nice video and review! I just got the same wing!! which 2.4 receiver do u use in it?
A while ago I made a 1/2 scale Flite Test Arrow with 3mm depron, that is also 45cm wingspan. I was surprised how good it flew. I always thought less than 1m wingspan is not flyable, which probably was true back in the NiCd and 40Mhz days. But if it is light enough you can go way smaller.
I'd love a scaled up version, kinda looks like the parrot disco.
Hi ! I like it think this wing is a bit too tiny and still have too much weight with these components. So, it flys fast but not long and it cannot glide whatsoever. I built one with a slightly bigger EPP wing (55 cm) and it really flies better with a CC3D nano controler, even with FPV (TX03 and a better 120 deg tiny camera). So, just saying that 55 cm is the ideal size for that. Oh, and I forgot : it's very quiet with a 5000 kV + 3 bladed 3 inch prop.
Lots of 16X16 boards out there, but none that I can find to support iNav with enough uarts to support a baro gps, and mag. But.....
Matek F411 ltd will work
I use the kakute f7 mini it fit perfectly and ad plenty of uarts www.banggood.com/custlink/vmKRccBztB
well that was good timing. just saw the pots about the wing xD
This is amazing video
Love this tiny wing! What amps is your motor pulling? and what is your flight time with this setup?
Jakie tam jest fc ? Jakiego vtx kupiłeś ?
Man you could easily fit an omnibus f4 nano v6 in there and run arduplane 😁
Your car looks cute
Damn you're good.
Hello Sir, i recently made a flying wing build just don't know what is the issue. the CG is well balanced..
everything is fine, but it just goes like this, Please take a look into the video
ua-cam.com/video/3HP7DFw8CIE/v-deo.html
It just goes on roll and flipps.
It is on full manual, but it just flips without any remote inputs
i Tried to move the CG bit forward and backward, but it made it worst.
i just don't understand what is wrong with it.
Can anyone guide me with it?
For your daughter some fresh air and giggles.
this looks great! I have one of those LDARC wing things with it's semi-auto launch mode for noobs like myself, but the motor has always got incredibly hot from the start and now it is falling out the air for some reason :(
These sized planes are really twitchy for my clumsy quadcopter hands lol
Hi
Urocza mała ;-)
I'll take it... for free. I Ain't paying' more than 25 cents for that. Someone in China is getting rich off of that crap!