Best Penetrating Oil On The Market? What Is It? Take A Look, I Will Show You.
Вставка
- Опубліковано 25 сер 2024
- Check out this awesome penetrating oil ! It is amazing !!
Thanks for watching ! I truly appreciate each view that I get on each and every video. For those that leave a comment, I always try to reply but there’s so many videos I may miss one every now and then, but thanks for taking the time to leave a comment, I really appreciate that especially as busy as we all are !
If you aren’t subscribed to my channel, please subscribe, it doesn’t cost you a single dime ! If you like my content be sure to hit that “Bell” and it will notify you when I have a new video come out.
Here are some of my favorite links to get some super cool items off Amazon.
Be sure to check them out (just clicking my link and getting to Amazon helps to support the channel. Even if you don’t buy the item listed, just using my link and then choosing another item will help)
Capri Master Bit Socket Set: Capri Tools Master Bit Socket Set, 88-Piece
Milwaukee 3/8” adapter to convert your impact into a 1/4” bit driver:
www.amazon.com...
Vampire Tools Kevlar Shears (these bad boys will cut, designed to cut Kevlar so you know they are tough, I love these things!) : www.amazon.com...
Vampire Tools 8” Extraction Pliers (these things are amazing):
www.amazon.com...
Vampire Tools Super Combo Scissors (these things will cut anything! I’ve cut a bunch of pennys in half with them and they stay sharp):
www.amazon.com...
Lang Tools Master Feeler Gauge Set (the most complete and best feeler Gauge Set I have found):
www.amazon.com...
Power Probe Master Combo Kit (this thing makes finding broken wires a breeze):
www.amazon.com...
OEM Tools Magnetic Rechargeable Light (the battery life is amazing on this light and it is very bright):
www.amazon.com...
Knipex Cobra Pliers (some of my go to Pliers):
www.amazon.com...
Streamlight Stylus Pro Rechargeable Flashlight (I carry this in my pocket daily):
www.amazon.com...
Coast A9R Rechargeable Penlight (this is an amazing light, wear it in my shirt pocket, the circular beam is awesome!):
www.amazon.com...
I use Tub O Towels to keep all my tools looking nice and clean. Here is the link to them:
www.amazon.com...
If your tools are stained or really dirty then Citrol is your friend ! This stuff works magic on rubber grips, impact guns, plastic etc. :
www.amazon.com...
Email: koontrucking101@gmail.com
Koon Trucking
200 Davidson Dr.
Booneville MS 38829
Follow me on Instagram: KoonTrucking
Check out www.vampiretools.com and use the Coupon Code: KOON15 for a 15% discount off your entire order plus get free shipping to anywhere in the Continental U.S.
Be watching for upcoming videos as we put these Vampire Tools to the test !
Lets see a real test on rusted bolts
i agree with you , not for melting cup ,
Lol that’s a test I came here for
So it does a nice job of eating through Styrofoam, how about a demonstration of it eating through rust.
Nothing like a honest demo from the salesman....Now lets see it actually tested on rusted bolts, not a Styrofoam cup that proves nothing.
We used it on air bags and it seemed to work really well. That was our first time to use it over penetrol 90 but it did a good job
I've been using this for a little over a year now. We call it "The Sauce" and it's not a gimmick. I've used it on stuff that would normally call for the red wrench.
Pretty impressive. Now have him spray it on his hands and stand still for 10min before washing. Most of us don’t always have access to a sink right away. Also what happens if you get a mist in the eye by wind? I’d rather have that happen with WD 40 then that stuff. Thanks for sharing.
It is safe. I actually seen him spray it on his hands and it didn’t bother them. I wished I would have had my camera out the first time he did the demo. He coated his hands with it.
Koon Trucking Good to know.
Ive used this a few years ago at the gm dealer i worked for. Never bothered my hands. The nissan and kia use their own brand but we always got PB through parts.
Been using torq cb for a couple years, it’s gotten in my eyes, in cuts, I’ve even tasted it. Doesn’t do shit to your hands
all the rust that i run in to is dry .
I didn’t hear him mention it but spraying it on a bolt for 20 seconds will drop it to below freezing temperatures which is helpful for a number of reasons
We use this at my shop and it works pretty decent. Doesn't add much lubrication like PBlaster though, so once I break something lose I spray that on it.
And most bolts aren't styrofoam cups, so the demo shows nothing about cutting through rust and frozen fasteners. Nice that it cuts grease, but the issue is that the fasteners are frozen because there's no grease/oil/lubrication of any kind on them. So IMO it doesn't really show much.
As stated though, I do use the product and do like it. Just not the greatest, most relevant demo.
I seem to like Liquid Wrench the best plus it's made in the USA.Its all a personal preference.
i want to see kimball to remove corroded bolts and nuts, not for melting cup ,
We used that stuff. We all absolutely hated the smell and it didn’t work that great. They gave us the same demo and we tried a case. We still have probably 5 cans
Gavin6060 we have tried it it smells like car wash wax to me and didnt work for us half as well as zep 45
at 53 you know he was going to say nuts but caught himself and said fasteners
So it melts foam, what does it do on real rust
The MSDS shows it contains over 20% of 1,2-dichloroethylene which is a chlorinated solvent much heavier than water and will dissolve styrofoam, as will any chlorinated solvent. I quit using chlorinated brake cleaner and now use the non chlorinated. Be sure to use this new product in a well ventilated area. I use Kano Kroil and have found it to be outstanding for use on rusted stuck bolts and cleaning guns. YMMV
smith wesson aerokroil is king
I’m a KimBall midwest Rep in Indiana, great demo, the cup represents the grease and the grim, I had a customer say that’s nice with the cup, but let’s try it on a rusty truck bolt. So we did he used pb blaster, and torq cb. If you want the job done faster torq is the better choice. Unless you have the time to wait for pb blaster to work. Your choice great video, great rep! Only company out there with 85% American made products
I have been very satisfied so far with Kimball Midwest. Great company. Great rep. USA made products and great prices
nothing better than a customer doing your demo for you
i want to see KimBall midwest to remove corroded or rusted bolts and nuts, not for melting cup
Thing I don't like about that spray, and I used it a lot. It doesn't leave a coating on the parts. It drys pretty quickly. I also don't normally have to take bolts off under water.
The Trans-1,2-dichloroethylene is probably what's causing it to evaporate more than other penetrating oils which don't contain a chlorinated solvent. It also contains a corrosive chemical called dodecylbene sulfonic acid. Definitely not good to get in your eyes. As you may know, the styrofoam cup trick is just a marketing gimmick that I have seen many times when I worked in the chemical distribution business.
Best stuff made .
The hot wrench still beats em all lol
I was thinking the same thing. Penetrating oil does add a nice visual and olfactory effect.
What effect would it have on various gasket materials if it came in contact? It went through that foam like hot butter
I haven’t seen it hurt anything other than that styrofoam cup he used. It claims styrofoam is nothing more than compressed grease ? I know it soaks in good and it actually cleans the hunk off fasteners. So far I like it.
Sweet! I thought Shaffers penetrol 90 was badass on stubborn fasteners, may have to get a can of that stuff to try!
Test on seized rusty fasteners like AVE did. This demonstration proved nothing to me
LINK PLEASE!! ? Cheerz!
Sweet video Clay. That looks like some good product. At least you don’t get the rust down south like we do up in the north shit hole lol...👍👍👍
In the foundry we had kerosene around and a parting coating on wooden molds. You’d be surprised at how well it works as a penetrant.
The original “Liquid Wrench”.
So first step breathe toxic fumes. When do we get to the rusty bolts?
this demo is used by many industrial sales people from different company's. as long as the penetrate is heavier than water it will sink to the bottom. Kar Products, barnes, lawson, tifco, ect. had the same stuff.
My father has ben geting kimball midwest stuff for years. And we love there penetrating oil.
Yeah it’s the best
Obviously by the comments, some people do not understand how penetrating oil works. I do demos on rusted fasteners all the time! Some people don’t like change even if it helps them!!
It’s really good stuff. We love it.
Certified labs makes a product called FREE that’s the best stuff I’ve used
Wd40 is not a penetrate it’s a water displacement 40th try
40 trys to displace water. WD=Water Displacement 40 tries and counting LOL.
Acetone goes right through styrofoam... is that atf + acetone?
I work for Kimball. When I saw this demo I knew I could sale that. We sale a semi load a month of this
Good maby you can get us the best price
Jarrod Penton of course I can
Sorry, but the Kimball Midwest stuff sucks! Every time I spray it on something, wait a few minutes and come back expecting it to work it EVAPORATES! What the hell kind of penetrating oil EVAPORATES?!? Seriously, I’m almost thinking maybe I got a bad batch did they put the wrong shit in the cans? I’m just gonna stick to PB blaster or liquid wrench.
We have had much better luck with it than PB Blaster?
They sold me with this demo in PA, but I’ve since found kroil and imo it’s far superior than any others.
I couldn't care less that it is heavier than water, How does it work as a penetrant?
Works good and it smells great
Nice 👍🏼
Have you ever used this on a pinch bolt that holds the 2 top control arms on an a audi a4 b7? Out of all the frozen bolts I have had to remove these are the worst you could ever come across.
The old panther piss or like the youngester called it the pineapple juice
I was first introduced to this product when i worked for caterpillar dealship
Its really that good hv 2 cans in my truck at all times
The next best thing is kroil but thats hard to get as it getting banned in some areas
Clay check out the torque cb plus
I'm up in the air on this one Clay.. But great video
Anyone know how to tag Project Farm, he loves comparison testing rust penetrates.
Hey, you scratched my cup! ;-)
Styrofoam is blown Polystyrene plastic. I will most assuredly damage or destroy plastic parts . It turns wire insulation into goo .
Stupid expensive though! That 899 a can when you buy a case is bullshit it’s almost $15 a can when you buy a case and everything they carry is like three times more expensive than anywhere else. That’s how you piss off customers by passing the cost onto them.
Yes sir i work for 1stayd corporation selling rust penetrants, brakeleen among other things, when i see kimball products in a shop i lick my chops, because 9 times outta ten i blow them away in pricing by 30 to 40 percent
I can't find a video of the oil on a peace of metal or bolt does it work or not can you do a video on it please
Yes it works good and smells good too
I wish the camera had still been on when he spayed his hands and no issues!
Hmm 🤔, pretty cool.
Is this a new product ?
A new twist on Blasters trick! Pretty Amazing Product. Hard to beat Penetro 90 though, Proofs in the pudding.
let see it remove a stuck on ride on mower wheel
it may be a good product but this is a typical bs demonstration
Seems like the views vote no. 👎🏽👎🏽
As for me I'm trying Scottys spray he just showed in hes video
Doesn't hold a candle to Kroil.
This showed you nothing/ not a rusted bolt involved!
Really? Don't you see how this demonstration proves nothing? Maybe the product works, but your snake-oil demonstration shows nothing. Your demonstration would only make sense if bolts are frozen in place by: (a) water OR (b) the other penetrating oils. Why don't you show it cutting through/dissolving/penetrating the grease and crud that you claim is the problem? Also would have to show how the other products do against that. THEN, as others have stated, show it working on actual rusted/stuck fasteners -- compared to the others.
WD40 is not a penetrant.
I can spray carb cleaner and other stuff and melt Styrofoam cup means nothing on a rusted bolt or stud nice try salesman Joe
bolts aren't usually stuck due to 'compressed grease' .....they are usually stuck due to absence of grease, and too much rust and corrosion.....i got nothing from this styrofoam cup demonstration except that it makes your product look really dangerous to be around.....and i've never seen a styrofoam cup prevent any bolt from coming out
you'd sell a lot more product if you had a proper real life demonstration on badly seized and corroded bolts
i came to this video today because i need a good penetrating oil right away, something other than wd-40 but watching your video here scared me away from your product.....liquid wrench will be my next stop
It shows it passes water that’s the point
1