Yes. I first use a fine scotch brite to lighrly scuff (not on windows) then clean with dawn dish soap. (Let air dry) then mask. Spaz-stix makes a good body prep as well.
I'd give real money to have had you walk that finished product outside in the sun for us. I can absolutely see that the camera did not do that justice. probably would've in the sun, maybe. man that's a beautiful job!
Top job but should of used fine sandpaper on the wheel arch's to get rid of the roughness and smooth them out , same with post holes use you straight scissors to cut the excess and a very slight rub with fine 240 grit but yes top job looks good.
Awesome video! It was very informative. I’m getting ready to paint my first body for my TRX4. I wish you had set your mustang body on the chassis at the end though! You left us hanging. Lol
Quick question. What is the application for the body? Drive around the area or race application? Race application tends to destroy and crack the body after a few races.
Hello, here’s my question I peeled off the protective cover on the back of my car once the holes are reamed wet stop the paint from getting on the outside? because you have the car on the roof. Thanks please help me out.
Before Pealing the outer Skin, I take a Dremel Tool and Clean up the Wheel Well Area Nice and Smooth and the Body Mounts I score the Hole Area and use another Dremel Grinder for the Holes as a slow- Medium Speed!
I just got a clear body for my rc truck. Didn't even occur to me to paint the inside of the body, lol. Thank you for the video. What exact brand(s) of the metallic backer and paint did you use. You might have said it but I missed it. Thanks again!
pro tip from a restoration tv show.. when painting.. make some type stand and hang your item from it and let it dangle in the air. they say it helps the paint not run. painting in the air is what they say to do
Thanks for sharing this technique, I am painting a smaller scale, clear 1/24 slot cars; so you gave me some great tips, my question is for clear bodies like these, what are the recommended paint brand ? Also, the smaller clear bodies don't come with cutouts for the Windows etc. What would you recommend, like blue masking paint tape ? Last, can you list what scissor you were using? Thanks Mike
Hey how are you doing I'm James I have a monte carlo 1979 lowrider rc do you do paint jobs on this I have the body and I'm willing to pay for this paint job
My Guy. You did an Amazing Paint Job! Thank you for providing visual and verbal instructions that are equally as Good!❤
Aren't you supposed to wash the inside of the the body first before masking ??
Yes. I first use a fine scotch brite to lighrly scuff (not on windows) then clean with dawn dish soap. (Let air dry) then mask. Spaz-stix makes a good body prep as well.
Did you not watch the whole video before commenting? He washed the inside after making.
I'd give real money to have had you walk that finished product outside in the sun for us. I can absolutely see that the camera did not do that justice. probably would've in the sun, maybe. man that's a beautiful job!
Best how to on UA-cam I’ve watched so far! Great job sir! 👏
man that body looks so good you have inspired me to paint a stampede body! great job man love the video
Top job but should of used fine sandpaper on the wheel arch's to get rid of the roughness and smooth them out , same with post holes use you straight scissors to cut the excess and a very slight rub with fine 240 grit but yes top job looks good.
Thank you my brother; you have taught me a lot just by watching your video and learning how the paint these cars👍🏿👍🏿👍🏿👍🏿👍🏿👍🏿
Myself I score the body all around with the hobby knife then I cut out the wheels but I see you did a good job came out really nice bud
Awesome video! It was very informative. I’m getting ready to paint my first body for my TRX4. I wish you had set your mustang body on the chassis at the end though! You left us hanging. Lol
What Paint are you using?
Nevermind i slowed the video down and found it. The Paint is "Spaz Stix Candy Red Paint"
Quick question. What is the application for the body? Drive around the area or race application? Race application tends to destroy and crack the body after a few races.
Man, I love that color. nice job.
Hello, here’s my question I peeled off the protective cover on the back of my car once the holes are reamed wet stop the paint from getting on the outside? because you have the car on the roof. Thanks please help me out.
Great job! Please could you tell me the exact colors you used? I love that effect
Awesome job
Great video man I’ll definitely use this when I paint my car.
thanks will need this tutorial for when i get my new body. subscribed and liked. I also have started creating rc content lately. its so much fun !
Nice work 👏
I will admit! I wasn’t Expecting that at all ( the final finish) good stuff bro!
I had to comment, that is absolutely beautiful sir!!!😳 And it takes quite a bit to impress me, you definitely did though!!!💯👍🏻😎
Before Pealing the outer Skin, I take a Dremel Tool and Clean up the Wheel Well Area Nice and Smooth and the Body Mounts I score the Hole Area and use another Dremel Grinder for the Holes as a slow- Medium Speed!
Hola, vi que no usaste pintura Tamiya ¿Que marca es la que usaste?
I just got a clear body for my rc truck. Didn't even occur to me to paint the inside of the body, lol. Thank you for the video. What exact brand(s) of the metallic backer and paint did you use. You might have said it but I missed it. Thanks again!
Hi do u know how to remove mat black ps tamiya clear coat from the out side off the rc 110scale car body shell
What the code of this pain??
Is that lawa orange?
Or candy red?
? What was the paint on the body at beginning video "chameleon"
Very Nice !! Good Job !!
pro tip from a restoration tv show.. when painting.. make some type stand and hang your item from it and let it dangle in the air. they say it helps the paint not run. painting in the air is what they say to do
If I use black can I use one plain color there entire time
What color red is it please metallic???
Thanks for sharing Sir👍👍👍👍
Love the colour
Awesome video!!
What paint and backer please? Want to order the right ones. . Thanks for the video. Car looks great.
Thanks for sharing this technique, I am painting a smaller scale, clear 1/24 slot cars; so you gave me some great tips, my question is for clear bodies like these, what are the recommended paint brand ?
Also, the smaller clear bodies don't come with cutouts for the Windows etc. What would you recommend, like blue masking paint tape ?
Last, can you list what scissor you were using?
Thanks Mike
I use tamiya polycarbonate paints and his scissors can be bought by searching rc hobby scissors
Is this candy translucent or metallic paint u are using?
An excellent video of what colors you used and which company
Hey how are you doing I'm James I have a monte carlo 1979 lowrider rc do you do paint jobs on this I have the body and I'm willing to pay for this paint job
Nice man 👍
Pretty cool video, learned a lot.thx.p.m.
from all the instructions I've seen it says paint then cut... i think its so the edges dont chip as much
thats sick
Wat paint u using bro
-that thing screams for a thick stripe straight down the middle…gdjob though-
good guide thanks for the video, gotta be honest my least favorite part is the painting.
Who told you that was a 69? they were wrong! it's a 68 with a style of a 69 rear spoiler, beautiful color! good video otherwise!
great video, much appreciated. thankyou . subbed & liked