The lens support on the RSC2 that I just bought is a Y shape without a strap. This video shows a different one when it explains how to attach the lens support, but the right one is shown during the rest of the video.
My next task is for sure learning Chinese, but until then please consider providing english Videos for your european customers. This video at least was helpful. Thank you!
Absolutely no idea why but my roll axis never balances enough to stay steady at 45 degrees either side. Its on way or the other or neither, no matter how much tweaking I do. Any ideas?
Thank goodness for online how-to videos VS the Asian language videos in the app by default even though I selected ENGLISH as my language. #2 I think my SIGMA wide lens is problematic even with a support stand as it rubs on the focus ring. Any solution?
Hi there, sorry for any inconvenience. Could you please provide a photo or video showing the issue for our further confirmation? You can contact us through the link below. www.dji.com/support
Thanks. Great video. Can i install the Manfrotto 323 base plate on top of the RSC2? I use Manfrotto 200PL plates in all my cameras and tripods, so it would be nice not to be able to use this plate and not the arca swiss.
hey guys, once you balance the gimbal with a specific camera + lens, will you need to rebalance every time you use, given the camera and lens are the exact same set up each time ? cheers
Hello, if you change the lens during your shooting, please rebalancing the gimbal for a better stabilization. If the combination is the same and keep mounting on the gimbal, it is not necessary to rebalance, but you can re-auto tune to make sure the motors are working well. Thanks
So it seems like there’s no solution for the roll axis returning to center? No matter how many times I tweak it to stay center; it’s never staying at a 15 or 45 degree angle.
Hello, there. Sorry for the inconvenience. If the gimbal’s roll axis has a non-orthogonal design, successful roll axis balance can be determined by the roll motor: if the left and right weights are the same, the roll motor is deemed balanced. Whether the left and right weights are the same can be determined based on the criteria below: 1) Tilt the roll axis arm to the left and right (approx. 45°), and it can remain still at any angle after you release your grip. 2) Tilt the roll axis arm to the left and right (approx. 45°), and it can fall back to the horizontal position after you release your grip. If any one of the above effects can be reached, the gimbal is deemed balanced and it can be used normally. Would you please check?
Hi there, we had replied to you on another post, the switch locks of the axes do not need to be locked after balance and during use. The locking knobs need to be tightened to the lock postion. Hope this is informative for you.
Yah, the locking of the arms is not clear in all videos. Seems like they always want u to lock everything and never explain clearly when it’s time to turn it on.
I just bought mine and there is a noise coming from the roll axis when it moves ? Should I be worried at all? It’s brand new literally 2 hours since opened - firmware has been updated as well
Hello, thank you again for this tutorial 🙂 When I connect my A7 IV to the RSC2, the gimbal keys are inactive (they no longer work) and this message is displayed "waiting for USB streaming" suddenly, I cannot start recording or update. in focus from the gimbal. Would you have an idea of the pb please?😫
Hi there, could you please provide us with a picture to check the error message? You can send it to DJI Support through the link below. www.dji.com/support
One question, I balance the ronin rsc2 perfectly, but when I touch the jostick, I get in l apk the error "Error jostick, calibrate the jostick, and restart the stabilizer". But I don't know how to calibrate the jostick ☹️Do you know how to do it?. Will be very very interesting one vídeo about of calibration the jostick, because there is a lot of people with the same problem.
Hi there Can you tell me what is the reason for RSC2 still vibrating after concretely balancing and performing the auto tune saying is successful. It’s saying excellent for all motors but on flat surface is vibrating. Everything was fine before yesterday. Setup: SONY A7ii 28-70mm. Thanks
Hello, you may try to lower the stiffness of each motor, or any motor of axis that you feel vibrating the most. Please keep us updated after you see the results, we are here to help.
Hello again 😊 I think the problem is solved. I removed the mini tripod that comes with and now is not vibrating anymore while is staying on flat surface . So I believe that was the problem. Thanks 😊
@@catalinionutbutuman4663 Hello there, thanks for the updates. Feel free to reach out with us when you need any assistance. Enjoy your shooting with our RSC2 and stay safe!
Hello, DJI! I am very interested with the gimbal, but im not sure if my heavy setup can be balance into that gimbal. My setup is Sony a6400 + Sigma 18-35 1.8. What do you think?
When start balancing the gimbal, power is ON on the gimbal or OFF on the gimbal, it s not mention in this video Whether power iON or Power OFF on the gimbal
Hi there, we are sorry to hear about the difficulties that you encountered, please contact us via www.dji.com/support and provide us with more details, we'll do our best to help this out. Thanks.
@@DJITutorials I returned it to the seller. The Pan motor isn't working. Power output is maxing @ 100 while the gimbal is on the table. It wouldn't also pan with Virtual Joystick and Force Mobile. Hopefully they replace it.
For some reasons I couldn't get my DJI RSC2 combo to work with my Fujifilm XS10. The record button on the gimbal doesn't work. I need solution please. Any one with similar problem?
Hi there, please visit the link below to check the setup methods. www.dji.com/support/compatibility/rsc-2/xs10 If it still not works, please test with another cable for a check.
@@DJITutorials Same problem. I was using the RSC2 with Nikon D780. It was working fine. Then all of a sudden stopped and the message on the screen says "Gimbal locked or unbalanced. Motors in Sleep mode". I took the camera off and rebalanced it. The motors are not locked and cannot get to work. I have shut down for 5-10 minutes, turned back on and get the same message.
@@elizavetashulga6324 Sorry to read about this. Could you please provide a video of the issue for further confirmation? Please include the camera and gimbal after balanced, try to adjust some angle. You can send the video to us via email at support@dji.com. Thank you.
I don’t know anything about it, but if you’re using your camera for both photography and video, then you have to rebalance every time you remove it and put it back on the gimball. I don’t want to take pictures, then 500m further take a video by doing a first time balancing, then 500m further want to redo photos, so remove it from the gimball, for 500m further want to redo a video and have to redo balancing... I need something plug and play. Balance once, be able to lock the settings, store the gimball in a bag, then pull it out, unfold it and directly put the device back on the gimball without re-balancing.
In a perfect world. I feel exactly what youre saying & suffer from the same issue. It seems w technology the "smarter" & more " advanced" we get, really the dumber things are becoming 🤦
Whenever I try to balance the roll axis it always rolls level as if the camera is bottom heavy, I can’t leave it at a 45 degree angle without it rolling to become level. I always do the previous two steps such as balancing the tilt and the camera doesn’t budge so that’s not the problem.
Hey, i had the same issue but i found a solution. After i balanced the roll axis till it remained leveled, i pushed the camera on the tilt axis a little bit higher till the roll axis remained wherever i put it. Also the tilt axis worked fine after this fine tune. My Setup is a A7S III + 16+35GM + Raven Eye. I hope it will work for you too.
что будет работать у Nikon d750 ( не прописана ) и dji rsc2 ? Старт - стоп будет работать , или что то ещё ? -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- what will work for the Nikon d750 (not registered) and dji rsc2 ? Will start-stop work, or something else ?
I am very disappointed about the fact that my manfrotto plate 200PL that i have installed on all my cameras and tripods doesn't fit on this gimbal. Why DJI? Not everyone uses arca swiss plates... What about us using manfrotto 200PL? In other gimbals at least it gave me the possibility to install the base plate manfrotto 323 to support 200PL plate. Now i cant even install the manfrotto 323 base??? Very, very dissapointed. I really wanted to buy this gimbal but i can't anylonger.
Sometimes I get confused balancing the gimbal if I haven't done it for a while. That happened to me yesterday and I couldn't figure out what I was doing wrong. Then I noticed the RONIN lettering was upside down, which meant I had it flipped!
Поспорю на счет грузоподъемности. После множества обзоров решил взять rsc 2 но он не оправдал заявленных мощностей. Мой сетап 1.5кг - sony a7s2+slr magic microprime 25mm. В условиях идеальной калибровки механизм работает в предельной нагрузке, особенно ось панорамирования, при наклонах заваливается горизонт.
guys honestly, for a videography company, your tutorials are awful. to many fast cuts, not enough detail and not enough close ups of each component. Make an effort ffs.
The last adjustment is clear as mud.
This is the pain point. Stay tuned for a new and more expensive update that solves this problem. Smh. About to return mine
Can we have more detain on the last adjustment of the pan axis please... that part was not shown clearly.
Another hot one 🔥
Why does my cam do 360s when sat down. What should I adjust?
The lens support on the RSC2 that I just bought is a Y shape without a strap. This video shows a different one when it explains how to attach the lens support, but the right one is shown during the rest of the video.
Also, the lens support bracket rests on the focus ring. Is that going to be a problem with auto focus?
@@gemwebb thats what i wondered, i wish i got this months ago i got a shoot in 2 fucking weeks and only got the gimbal a week ago
i didnt get the strap
@@gemwebb I guess it shouldn't be a problem if your lens has the full time manual focusing feature
For the beginners this video needs another explanation video 🤧 More elaborated and much slower version would help much 🙌🏻
Super helpful living my RSC2 so far. Great work, build feels amazing!
My next task is for sure learning Chinese, but until then please consider providing english Videos for your european customers. This video at least was helpful. Thank you!
In some ways this video is just not that helpful it goes through certain things really quickly without giving enough detail
Wow, ok...on the strength of all these high quality videos I bought mine today...but it sure looks rather complicated...
Absolutely no idea why but my roll axis never balances enough to stay steady at 45 degrees either side. Its on way or the other or neither, no matter how much tweaking I do. Any ideas?
The same here
me to what a fucking nightmare
Same. Damn all those youtubers saying this is a great product. They probably got paid off to "review" it
What they don’t mention is the roll axis has two adjustments. The arm adjustment and one underneath where the camera sits.
Please is it possible to get to Togo?
Thank goodness for online how-to videos VS the Asian language videos in the app by default even though I selected ENGLISH as my language. #2 I think my SIGMA wide lens is problematic even with a support stand as it rubs on the focus ring. Any solution?
Hi there, sorry for any inconvenience. Could you please provide a photo or video showing the issue for our further confirmation? You can contact us through the link below. www.dji.com/support
So i have to lock every lock after balancing it . And do we unlock everything when we do the balance test?
I ordered mine a while ago but just noticed I never received my strap; is it possible to get it?
Hello, did you buy it on our official website? If so, please provide us with the relevant order number.
The iPhone bracket was in this kit, but no cable from iPhone to the gimbal. Where can I get one?
Thanks. Great video. Can i install the Manfrotto 323 base plate on top of the RSC2? I use Manfrotto 200PL plates in all my cameras and tripods, so it would be nice not to be able to use this plate and not the arca swiss.
I have a canon eos r5 which is said to be compatible but the side of the camera keeps hitting the side of the gimble
How to fit iPhone and what adaptor does one need? Also, I have not seen where the long handle is fitted
hey guys, once you balance the gimbal with a specific camera + lens, will you need
to rebalance every time you use, given the camera and lens are the
exact same set up each time ? cheers
Hello, if you change the lens during your shooting, please rebalancing the gimbal for a better stabilization. If the combination is the same and keep mounting on the gimbal, it is not necessary to rebalance, but you can re-auto tune to make sure the motors are working well. Thanks
It was really helpful. THANKS!
So it seems like there’s no solution for the roll axis returning to center? No matter how many times I tweak it to stay center; it’s never staying at a 15 or 45 degree angle.
Hello, there. Sorry for the inconvenience.
If the gimbal’s roll axis has a non-orthogonal design, successful roll axis balance can be determined by the roll motor: if the left and right weights are the same, the roll motor is deemed balanced. Whether the left and right weights are the same can be determined based on the criteria below:
1) Tilt the roll axis arm to the left and right (approx. 45°), and it can remain still at any angle after you release your grip.
2) Tilt the roll axis arm to the left and right (approx. 45°), and it can fall back to the horizontal position after you release your grip.
If any one of the above effects can be reached, the gimbal is deemed balanced and it can be used normally.
Would you please check?
The amount of times I’ve watched this 🤦♂️
Are you supposed to lock everything after perfecting the balance and getting the 3 excellents? When do we lock all the axises ??? Please help!!!
Hi there, we had replied to you on another post, the switch locks of the axes do not need to be locked after balance and during use. The locking knobs need to be tightened to the lock postion. Hope this is informative for you.
Yah, the locking of the arms is not clear in all videos. Seems like they always want u to lock everything and never explain clearly when it’s time to turn it on.
My roll axis always returns to center, help please
I can balance the roll axis so it stays centered. But if I turn it, it will not stay and falls back to the center position. Is that normal?
I have the same issue. Were you able to get a response? If so how were you able to resolve this?
No its not, you have to fix the pan axis
@@user-dh5fp4gw1b ok thanks for your reply. I will try again
@@eeeeeedge np, pan is honestly pretty hard. Try to lean the gimbal on 2 of its 3 legs and just change it till it doesnt move
I just bought mine and there is a noise coming from the roll axis when it moves ? Should I be worried at all? It’s brand new literally 2 hours since opened - firmware has been updated as well
Hello, thank you again for this tutorial 🙂 When I connect my A7 IV to the RSC2, the gimbal keys are inactive (they no longer work) and this message is displayed "waiting for USB streaming" suddenly, I cannot start recording or update. in focus from the gimbal. Would you have an idea of the pb please?😫
Hi there, could you please provide us with a picture to check the error message? You can send it to DJI Support through the link below. www.dji.com/support
the ronin reveneye rsc2 does not support alpha 7c
This is so quick Can we get a Balancing for Dummies.
One question, I balance the ronin rsc2 perfectly, but when I touch the jostick, I get in l apk the error "Error jostick, calibrate the jostick, and restart the stabilizer".
But I don't know how to calibrate the jostick ☹️Do you know how to do it?.
Will be very very interesting one vídeo about of calibration the jostick, because there is a lot of people with the same problem.
Hi there
Can you tell me what is the reason for RSC2 still vibrating after concretely balancing and performing the auto tune saying is successful. It’s saying excellent for all motors but on flat surface is vibrating. Everything was fine before yesterday.
Setup: SONY A7ii 28-70mm.
Thanks
Hello, you may try to lower the stiffness of each motor, or any motor of axis that you feel vibrating the most. Please keep us updated after you see the results, we are here to help.
@@DJITutorials will do thanks 🙏
@@catalinionutbutuman4663 Thank you. You can also keep us updated via email at www.dji.com/support.
Hello again 😊
I think the problem is solved.
I removed the mini tripod that comes with and now is not vibrating anymore while is staying on flat surface . So I believe that was the problem. Thanks 😊
@@catalinionutbutuman4663 Hello there, thanks for the updates. Feel free to reach out with us when you need any assistance. Enjoy your shooting with our RSC2 and stay safe!
Thanks! 😍
Hello, DJI! I am very interested with the gimbal, but im not sure if my heavy setup can be balance into that gimbal. My setup is Sony a6400 + Sigma 18-35 1.8. What do you think?
Hi Alain, here is the website for Ronin Series Compatibility Search: www.dji.com/support/compatibility?from=enbbs, hope this helps, thanks.
Weigh everything.
Excellent ....😍
Thanks
don't have this but am very interested in purchasing ...
When start balancing the gimbal, power is ON on the gimbal or OFF on the gimbal, it s not mention in this video
Whether power iON or Power OFF on the gimbal
I think its of, because when you start it, it should be easy for the RSC2 to position itself.
Just like the drone does when it calibrates
I cant balance the Roll Axis. I have to move the plate backwards but that would unbalance the tilt.
Hi there, we are sorry to hear about the difficulties that you encountered, please contact us via www.dji.com/support and provide us with more details, we'll do our best to help this out. Thanks.
@@DJITutorials I returned it to the seller. The Pan motor isn't working. Power output is maxing @ 100 while the gimbal is on the table. It wouldn't also pan with Virtual Joystick and Force Mobile. Hopefully they replace it.
@@madmanstudioph We see, we hope you'll get the unit back soon.
For some reasons I couldn't get my DJI RSC2 combo to work with my Fujifilm XS10. The record button on the gimbal doesn't work. I need solution please. Any one with similar problem?
Hi there, please visit the link below to check the setup methods. www.dji.com/support/compatibility/rsc-2/xs10 If it still not works, please test with another cable for a check.
Dji rsc 2 no es es compatible con Alfa 7c
roll axis is such a pain to balance
Gimbal locked or unbalanced. Motor in Sleep mode। plz help
Hello, there. Sorry for your inconvenience. Please press the power button once or twice to enter Sleep mode, and repeat to exit.
RSC2 gimbal Gimbal locked or unbalanced. Motor in Sleep mode plz help
Hello, there. Sorry for your inconvenience. May we know more details about the balance or lock issue?
@@DJITutorials Same problem. I was using the RSC2 with Nikon D780. It was working fine. Then all of a sudden stopped and the message on the screen says "Gimbal locked or unbalanced. Motors in Sleep mode". I took the camera off and rebalanced it. The motors are not locked and cannot get to work. I have shut down for 5-10 minutes, turned back on and get the same message.
@@elizavetashulga6324 Sorry to read about this. Could you please provide a video of the issue for further confirmation? Please include the camera and gimbal after balanced, try to adjust some angle. You can send the video to us via email at support@dji.com. Thank you.
Strange the rsc-2 says sc-2 on the handle
It’s a “ronin” sc-2
I don’t know
anything about it, but if you’re using your camera for both photography
and video, then you have to rebalance every time you remove it and put
it back on the gimball. I
don’t want to take pictures, then 500m further take a video by doing a
first time balancing, then 500m further want to redo photos, so remove
it from the gimball, for 500m further want to redo a video and have to
redo balancing... I need something plug and play. Balance
once, be able to lock the settings, store the gimball in a bag, then
pull it out, unfold it and directly put the device back on the gimball
without re-balancing.
In a perfect world. I feel exactly what youre saying & suffer from the same issue. It seems w technology the "smarter" & more " advanced" we get, really the dumber things are becoming 🤦
Me also - dont understand last adjustment!
Whenever I try to balance the roll axis it always rolls level as if the camera is bottom heavy, I can’t leave it at a 45 degree angle without it rolling to become level. I always do the previous two steps such as balancing the tilt and the camera doesn’t budge so that’s not the problem.
Hey, i had the same issue but i found a solution.
After i balanced the roll axis till it remained leveled, i pushed the camera on the tilt axis a little bit higher till the roll axis remained wherever i put it. Also the tilt axis worked fine after this fine tune. My Setup is a A7S III + 16+35GM + Raven Eye.
I hope it will work for you too.
что будет работать у Nikon d750 ( не прописана ) и dji rsc2 ? Старт - стоп будет работать , или что то ещё ?
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
what will work for the Nikon d750 (not registered) and dji rsc2 ? Will start-stop work, or something else ?
one of the complicated part is to adjust the gimbal.
I am very disappointed about the fact that my manfrotto plate 200PL that i have installed on all my cameras and tripods doesn't fit on this gimbal. Why DJI? Not everyone uses arca swiss plates... What about us using manfrotto 200PL? In other gimbals at least it gave me the possibility to install the base plate manfrotto 323 to support 200PL plate. Now i cant even install the manfrotto 323 base??? Very, very dissapointed. I really wanted to buy this gimbal but i can't anylonger.
Sometimes I get confused balancing the gimbal if I haven't done it for a while. That happened to me yesterday and I couldn't figure out what I was doing wrong. Then I noticed the RONIN lettering was upside down, which meant I had it flipped!
balancing for the first time is a fucking nightmare
You gotta look at other videos by youtubers this one isn't much help
1:26 Um this is not right...
Price
Expensive
Поспорю на счет грузоподъемности. После множества обзоров решил взять rsc 2 но он не оправдал заявленных мощностей. Мой сетап 1.5кг - sony a7s2+slr magic microprime 25mm. В условиях идеальной калибровки механизм работает в предельной нагрузке, особенно ось панорамирования, при наклонах заваливается горизонт.
Never told us if the dji is on or off looks off
last adjustment was not the slightest bit helpful
Helpful. Learn something about sound and music. It’s hard to hear the instructions with the trite music playing continuously in the background.
As a hobbyist and family filmer..I think I lost my will to buy gimbals. Do I have to do this every single time? wow...
한국어 번역이 중간에 끊겨버리네요 한국어 번역도 부탁드립니다.
Valen bolsa fdj
What a great paper weight this is..
Is it real that there's so many returns of RSC2 because of jitter problems?
Can u post a video showing this problem?
Still fucking confusing. Do I re lock an axis after balancing it? Give a through guide
Your Pan Axis balance tip isn't in depth enough. Also the notes on screen are opposite of the narration? Which is it? Heeeeelllpppppp
Could you go any quicker? Sheesh.
The final step is so poorly explained.
So confusing
I lost so mutsh time ah
자막 뭔데 ㅅ....
Poorly chosen words, unclear context, different model used here than what i bought. Disappointed 😔 DJI
guys honestly, for a videography company, your tutorials are awful. to many fast cuts, not enough detail and not enough close ups of each component. Make an effort ffs.
I have a canon eos r5 which is said to be compatible but the side of the camera keeps hitting the side of the gimble