Said the same . He was not continus a bunch of start stops makes a shitty looking weld ...should be start 360 and stop but nope..not saying it wont be fused but most likely crater cracks on every stop lack of fusion undercut and porosity.
Yes makes a difference. I did the same on my 2014 SS. Dig how it sounds when downshifting with the paddles. Look into Livernois aggressive tuner. Just ordered one for my SS. I will also do the cold intake and eventually re badge my care with the Holden lions..
Great simple mod, I did the same delete last year and I agree, sounds better! I think you mentioned getting an intake later 👍🏼 I’ve since added CAI and tune, it’s like a different car, I think you’ll love it!
Luckys Wheelz N Dealz just add some long tube headers and go to an x-pipe and delete the other cats and you think you love that sound now, man I'm telling you it will sound like a whole different car.
I deleted the secondary catalytic converters and factory h pipe. Installed Magnaflow x pipe. With Roto-Fab intake and Livernois tune, she sounds awesome and she definitely goes better than stock.
To everyone complaining about how the welds look. Theyre not that bad. Its not easy mig welding nasty stainless under a car. Id be more worried about the fact that he used some shitty galvanized mild steel to replace the cats. That mod is going to rust out in a year.
Is that your mechanic shop too, the oil changes and cold air intake. I got a TBSS I’m looking to get some work done and since you trust them with your SS I’ll use them too
That rear H-Pipe wasn't factory. There's a mid muffler that goes there. Sounds good though. I had Kooks 1-7/8" headers>3" catted x-pipe on my 14 and it sounded amazing. Probably getting x-pipe on my 17 next.
Why would he need luck?... he will obviously pass the visual inspection due to still have the first set of cats. And the O2 sensors are after the first set... what he cut off doesn't really do shit but quiet the exhaust.
Joe Velez it’s a freer flow . Not restricted . So it sounds just about the same until you get on it honestly . I thought the same thing until I actually pulled out the shop into traffic .
Shae Robins you know whats funny? I see alot of rebadged Chevy SS with Commodore badges and the boys here in OZ, rebadge their Commodore with Chevy badges....lol at the end of the day its has a Chevy heart and thats what matters :)
I'm not a welder but these welds don't look that great
chinese welders!!
Idk which welds you were speaking of but the welds he made after removing the cat were terrible 🤦♀️
@@anu-radha_7423 IDK either!! not my problem!!
They look fine for exhaust
Said the same . He was not continus a bunch of start stops makes a shitty looking weld ...should be start 360 and stop but nope..not saying it wont be fused but most likely crater cracks on every stop lack of fusion undercut and porosity.
Yes makes a difference. I did the same on my 2014 SS. Dig how it sounds when downshifting with the paddles. Look into Livernois aggressive tuner. Just ordered one for my SS. I will also do the cold intake and eventually re badge my care with the Holden lions..
Man them be the best mechanics. The ones that do all the work with a square in they mouth the whole time. 🤣 Car sounds good as hell though.
Mr.Guyton 😂 ... thanks 👍🏾💯💪🏾💨
This guy going hard on that pedal 😂
Nice. Sounds much much better on the road than parked. I hope you saved the cats in case you move to CA.
For the before and after, go to 1:11 and 8:34
Aaron Ben 👍🏾
mvp
Great simple mod, I did the same delete last year and I agree, sounds better! I think you mentioned getting an intake later 👍🏼 I’ve since added CAI and tune, it’s like a different car, I think you’ll love it!
Red SS thanks 👍🏾 ... i’m going to check it out ... ok i’m going to have to do those mods
Luckys Wheelz N Dealz just add some long tube headers and go to an x-pipe and delete the other cats and you think you love that sound now, man I'm telling you it will sound like a whole different car.
Isidro Sevier yeah I’m gonna do it all ready know I did the same set up on my Camaro SS
I deleted the secondary catalytic converters and factory h pipe. Installed Magnaflow x pipe.
With Roto-Fab intake and Livernois tune, she sounds awesome and she definitely goes better than stock.
Michael Kleiner ok coo i’m have to put X pipe on mines 💨
Do you have a video showing how it sounds?
ashleyk79 yes
Is it just an X pipe or the Resonated x pipe?
yessir. Great vid dude, sounds awesome!
To everyone complaining about how the welds look. Theyre not that bad. Its not easy mig welding nasty stainless under a car. Id be more worried about the fact that he used some shitty galvanized mild steel to replace the cats. That mod is going to rust out in a year.
Nice mate.
Chase mine out same colour exhaust cutouts and mid mufflers removed.
Australia
Throw a cam on it now for that Chop Chop Chop sound 👍👍👍
Is that your mechanic shop too, the oil changes and cold air intake. I got a TBSS I’m looking to get some work done and since you trust them with your SS I’ll use them too
Have you tried the track mode yet. I’ve heard it’s fun as hell
That ss sound like a Beast💯
OG_BOOGIE3x thanks 💯
Shit sounds amazing but them welds beads are trash bro
Darryl Hudson yeah.. I'm offended just looking at those welds.. 😂 😂 😂
That's what i thought
Real nice . Know anything on the green obs stepside on the back ground?
That rear H-Pipe wasn't factory. There's a mid muffler that goes there. Sounds good though. I had Kooks 1-7/8" headers>3" catted x-pipe on my 14 and it sounded amazing. Probably getting x-pipe on my 17 next.
I like loud car sound so good to my ear 🔥🔥💯👌
Awesome car
Oh yea she alive now big bro
How much did they charge for something like that?
Needs some long tube headers and it will sound so much better.
Wow... those welds are TERRIBLE. But damn that sounds nice.
BroskyWhoDatedHoski he probaly let him keep the cats too :( oof
Wish me luck I'm going to try to pull off with my SS this week hopefully
That bihh sound nice
How much they charged you ?
You realize
Those dudes
Got
You man
Damn
Dude
Wyd
I'm sorry man u will learn
If you don't mind me asking, what did the shop charge you? Im thinking about getting this done but was curious what it ran you.
Zach Hanson $160
This shit is stupid nice. Do everyone keep saying it looks like a Malibu when you drive it?
Lucky,
I’m in the city what shop you use for the SS?
Roderick Burks muffler kings let them know Lucky’s send u from UA-cam they might give you a better deal
All ya need now is long tube headers and a big cam and corsa mufflers
Did that guy blow a hole through the exhaust pipe when he was welding that first cat delete pipe?
That wasn't a cat delete you might want to look at it the video again
Now, it's an ILLEGAL noise polluter.
is this legal?
Sounds bad azz!!!!!!!!
Rico_Suave1851 thanks 👍🏾💯💪🏾
Why is it that every muffler guy has a ciggie in his mouth and waving the sawzall around like he about to nick a gas line
Tungsten23 😂😆😝
Who needs safety glasses!?!?!
♥️
If you haven't done so already pull the fuse for the bimodal exhaust out. Thank me later👌
Good luck on passing emissions!
Why would he need luck?... he will obviously pass the visual inspection due to still have the first set of cats. And the O2 sensors are after the first set... what he cut off doesn't really do shit but quiet the exhaust.
Clean Under Car . But U Don't Get Rust Like As in UK also if we Take Cats Off. it Won't Pass a MOT Test . Thats UK Law ?
I would never go back to that shop 😂dudes welds are horrendous
removing 2nd cats give more power ???
No. No it doesn't.
Any ( check engine ) light on afterwards?
fahoooooooooooooood1 Nope no check engine lights on never just runs better And a lil more horsepower better flow
Pretty sure that only happens with removal of o2 sensors
Thats weird the ss dont have the big ass box like the SS camero.
That's a big savings.
What cold air intake you goin with?
Marcus Elmer The cheapest one I can fine the specter videos coming soon
Go with a VCM otr intake man you won't be disappointed!
Wait till Buddy gets a hot as shit shaving in his eye heel wish he had some safety glasses on
I dont understand how he drove away thinking he made a difference in the sound. He should modified the mufflers or deleted them!
Joe Velez it’s a freer flow . Not restricted . So it sounds just about the same until you get on it honestly . I thought the same thing until I actually pulled out the shop into traffic .
Damn.
You should undo those standard exhausts. 3inch stainless cat back minimum
Shae Robins nah not 3” stick to 2.5” because 3” drones way to much
Do you still have the Camaro SS
Michael Parris which one ?
The 99 the black one t-top
Michael Parris nope sold that a while back
What year is that ss
alex briscoe 2016
Aren’t those called resonators?
Yes
Yes
Not to be rude or anyhing but those LS just don't sound like V8 should. I think the 350 with a carb was better.
So your car smells like gasoline, good job!
NigGa you got holes in yo pipes already I HOPE he filled um in 4:06.!
Good eye
Don’t nobody like that tickin you know lol
I did this on my 2011 Caprice ppv and put a x pipe
Corn Batiste I’m put a xpipe on it later
bruh what part of oklahoma you from?
Honda EK Life Oklahoma City
bro gotta take me for a ride in the whip
Honda EK Life 👍🏾
are u going to SCT this month
Honda EK Life wat does SCT mean ?
Bitch sounds good but I'm scared to do it to my 2016 Camaro SS think it fucks up the warranty
Chris woods thanks 👍🏾 ... it should not mess up warranty ... Plus they have to prove that what you did to it caused the problem
Well I decided to delete tha cats and can tell a big difference! 😁😁😁
I know your not happy with the welding I can read your mind.
Hey Bro, I’d love you to join the Holden Commodore VF series 2 SS club on Facebook
Sam Ham ok 👍🏾💯💪🏾
Smokes under a Car .U Think . in UK you take your Cats Off it WON'T Pass Your MOT. it Fails
Peter Lee we don’t have that in Oklahoma
Somehow I feel that will not pass the swing of the in missions test now
jonathan lavezzi secondary cats are for sound purposes only. Nothing to do with emissions. That’s why there’s no o2’s behind them.
And Oklahoma doesn't have emissions 🤣
This what I was wondering. Let me go ahead and setup my appointment
That SS is nice. Didn't know it was rear wheel drive.
yeah was made in Adelaide!!.....Sth Australia.
I would have saved and spent my money on headers and exhaust then a cam and tuning.
New wheels
Where the 96 impala at
Sean Johnson sold it to get this SS
Dem he doesnt know how to weld 😂😂😂
Holden VF Commodore
So you didnt do a cat delete.... you had the resonators cut off 🤣🤣🤣🤣 your vid post says cat deletes. Cats are the cans infront of the reaonators lmao.
the weld and the pipes used very poor quality.
Thasa a ugly ass weld but damn I love the car
Sounds nasty ohhhhhweeeeee!!!
Oh damn that sounds like straight ass bro. Got to be the worst sounding exhaust I've ever heard. Not hating, just being real. My opinion tho.
Bro that doesn’t sound good at all
This is all it takes to make videos? I could've been doing this 10x better for a long while now.
bad move bro
That my friend sounds like shit...
Cut them all out
But those big ugly mufflers
That is the worst welding job I have ever seen.
Ve commodore
Shae Robins nope its VF Commodore SS :) I should know cause I’m Aussie
@@mr.h3603 my bad jus saying it aint no chevy
Shae Robins you know whats funny? I see alot of rebadged Chevy SS with Commodore badges and the boys here in OZ, rebadge their Commodore with Chevy badges....lol at the end of the day its has a Chevy heart and thats what matters :)
True story my friend😜
Not bad for an Aussie car
You do realise this car was designed and built in Australia by General Motors Holden. They only exported a very low number to the U.S.
Attention hoar fail...
My ve v6 sounds better than this
Too much rattling
Just some simple advice. Don't chew gum or eat doing a video. Great job none the less
Oh my gosh, the gum smacking is disgusting dude. Why do you think people want to watch that?