How to Replace Rear CV Axles 2008-2013 Nissan Rogue
Вставка
- Опубліковано 25 сер 2024
- Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ib/1AAC...
This video shows you how to install new rear CV axles from TRQ on your 2008-2013 Nissan Rogue. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue
Tools you will need:
• Pry Bar 1aau.to/oSw/1AX...
• 18mm Wrench
• 21mm wrench
• 10mm Socket 1aau.to/oa7D/1A...
• 18mm Socket 1aau.to/oafh/1A...
• 21mm Socket 1aau.to/oafh/1A...
• 30mm Socket
• 32mm Socket 1aau.to/ocs/1AA...
• Side Cutters
• Socket Extensions 1aau.to/obrj/1A...
• Swivel
• Torque Wrench 1aau.to/oaCc/1A...
• Anti-Seize Grease
• Gloves 1aau.to/oZ6/1AX...
• Marker / Writing Utensil
• Safety Glasses 1aau.to/oTe/1AX...
• Floor Jack 1aau.to/o3t/1AX...
• Rubber Mallet 1aau.to/ogD/1AX...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Nissan Rogue 2008-13 1st Generation: • Nissan Rogue 2008-13 1...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Great video man. I’m in the process of replacing a friends differential that shattered into pieces on him. I watched another video but it was one of those where he tells you what to do but then skips 45min worth of work and the axle is on the ground lol. I was stuck right where you removed the coil spring and after seeing your video I realized the spring could pop right out without tension. As soon as I popped the spring out the rest was history lol. So thank you for actually showing step by step. Much appreciated even though this is almost a year later 😂
Thank you ✌️
Nice video 👍 A few things though such as don’t use screw drivers as pry bars especially if you have pry bars, you buzz down fasteners with an impact then put a torque wrench on it is kinda weird when you hear that beep as soon as you use it so you’re over-torquing and wasting time with specs. Another thing is what is up with the new rotor and axle but then you put the tire back onto a rusty hub assembly? Lol thumbs up though, thanks for posting this.
+@alextoader8578 Thanks for watching our video! 1aau.to/m/Shop-TRQ
Very Nice - What State Are You Located with All That Rust ...
Nice work thank you
Great vid. Very helpful. Thx
Nice video, But I think this channel mosses the mark. As most Folks don't have a lift, should have done a video on how to do it, so the average Jo. Can tackle this job in their own backyard.
This video assumes that everyone has a Lift. And that's NOT the case.
Would be nice if y'all did an updated version, with out the lift.
Imagine getting an axel off that easily lol
How long did it take you to do this?
Trying to find a video for an Armada. Would this be very similar ?
+Michael Gesang We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ
Qashqai 2009 and 2013 the same axle