Thank you for this in Real time. This is so me no editing, just trying and trying again. I love your channel by the way. ❤ Im just starting with crafting and all this stuff is so intimidating to me. I want to make videos but don't know where to start.
That happened to me when I did my first DTV shirt didn't think about changing blades I end up just putting an offset behind to cut it out thanks for the tip will be ordering that blade kit are they compatible with the Cricut 2.
Thanks for showing it will do intricate cuts and I'm going to try. You're right about if it's not adhered well it will come off. My first print I thought it was pressed good and it wasn't. My grand daughter wore her shirt to daycare and it peeled off in one of the corners but I was able to repress and it appears to be OK. I'll see after it is washed. Tracey
I saw that Siser is now recommending after pressing wait 24 hours then wash inside out on cold water (then repress 5-10 if necessary) before wearing. This came about because someone used a high saturation print and the color ran in the rain…
Few questions lol Does this come out glossy? A lil hard to tell with the shirt. Can this work with any inkjet printer? Could I take a normal picture. One taken with a camera and put it on this?
You did better than me. I have a Brother Scan & Cut but one of my designs came out just like that. The letters separated from the image. I threw it in the trash. 🤦🏽♀️🤣 I wish it was easier to cut out the image so it's only the design. Thanks for the video!!
Did you flatten the image? I don’t get why the cricut cut around the letters when it should just cut around the entire image. Cricut be trippin sometimes.
My cousin gave me this roll I thought she said it was Siser so I’m sorry I don’t know she doesn’t remember but I’ll see if she can find a receipt or something
Hello was it matte or glossy. I saw another video where they said using parchment paper over the design gives it a different appearance than the Teflon sheet.
As long as no ink has transferred to the mall, you can reuse it. I buy my mask from Amazon ..."Frisco" transfer mask..$20. 12"x50'..50 FEET! THIS IS VERY GOOD MASK..50 FEET for $20... You can't beat that!
Here's the link for the Siser EasyColor DTV HEAT TRANSFER WAREHOUSE here's the link: heattransfer.ositracker.com/192651/11767
I like the fact that you explain everything good job thatnk you 👏 👍 👌
Awwww thanks so much!!!
Thank you for this in Real time. This is so me no editing, just trying and trying again. I love your channel by the way. ❤ Im just starting with crafting and all this stuff is so intimidating to me. I want to make videos but don't know where to start.
Awwww you’re so welcome… I do one on one consultations if you’re interested… you can email me dodreamon3@gmail.com
I got the same printer it works Great, Fax print scan all in one
Yasssss❤️
I go around the outside edges of the letters and design with my weeding tool before I weed. I also put my paper setting on rice paper.
Cool thanks so much…
Love the glitter weeding pen!
Their suggestion is to reverse weeding but mine wouldn't cut on any setting with a new blade so kudos to you!
Omg 😍 it looks amazing! I was sitting there in suspense with weeding those letters! Haha Be proud that you nailed such an intricate design ❤️🇦🇺
That happened to me when I did my first DTV shirt didn't think about changing blades I end up just putting an offset behind to cut it out thanks for the tip will be ordering that blade kit are they compatible with the Cricut 2.
Thanks for showing it will do intricate cuts and I'm going to try. You're right about if it's not adhered well it will come off. My first print I thought it was pressed good and it wasn't. My grand daughter wore her shirt to daycare and it peeled off in one of the corners but I was able to repress and it appears to be OK. I'll see after it is washed.
Tracey
You’re so welcome and yes ma’am I knew it LOL Thanks for watching and commenting ♥️♥️♥️
I saw that Siser is now recommending after pressing wait 24 hours then wash inside out on cold water (then repress 5-10 if necessary) before wearing. This came about because someone used a high saturation print and the color ran in the rain…
@@gailgohrick5836 Ohhhh thanks so much I’ll def add this info with my wash test video!!!
Thanks! you did an amazing job.
Awww thanksssss so much 🥰🥰🥰
I saw other UA-camrs put an offset around the image when you have have wording or small print.
Well done You left some white bits in the Hocus Pocus and you must do a repress for 10 to 15 secs which forces the Print Into the cotton shirt more x
thanks
Absolutely Amazing Content and Helpful Tips and Tricks
What are those white things in front of your rubber rollers in the cricut machine
Absolutely gorgeous!
Few questions lol
Does this come out glossy? A lil hard to tell with the shirt.
Can this work with any inkjet printer?
Could I take a normal picture. One taken with a camera and put it on this?
This is glossy depending on what you use to cover it up like butcher paper or parchment paper (Glossy) yes you use inkjet. And possibly
That is so nice
Thanks
Where did you get your different needles?
Try placing the clear htv on the image before weeding
Love it great job Do Dream On.
You did better than me. I have a Brother Scan & Cut but one of my designs came out just like that. The letters separated from the image. I threw it in the trash. 🤦🏽♀️🤣 I wish it was easier to cut out the image so it's only the design. Thanks for the video!!
Did you flatten the image? I don’t get why the cricut cut around the letters when it should just cut around the entire image. Cricut be trippin sometimes.
🤣🤣🤣This was so long ago I honestly
don’t remember
Love this and love you for sharing!
I was told you should sral it heat press a 2nd time ???????
Yes you should!
Can you use the dtv on dark and light colors also do you have to use a mask?
Thank you for this video. Can you please advise the name of the printer your using .thank you
Where did you get the different angle blades
Will it work with an Epson sublimation printer ?
did you download the image from google and upload to crictu design??
This one I think I got from Etsy I can’t remember
If I did get it from Google yea I just saved it
Have you washed it? Curious how it holds up after washing.🤔
It looks like it would be easier to reverse weed?
that’s def a possibility
Question... What transfer sheets did you use. The sheet you used is much sticker than the sheet that is sold with the DTV.
My cousin gave me this roll I thought she said it was Siser so I’m sorry I don’t know she doesn’t remember but I’ll see if she can find a receipt or something
Can you share your printer settings? I have a Mac and using an Hp also
YOU ARE SO AWESOME TY
Hi , is glossy , semi glossy , matte?
You can make it either depending on how you cover it.
love the shirt .😍
You plz link the blades you used tks
Use an offset it might make it easier?
It 100%wouldn’t make it easier thanks!!!
You think offset would work
Hello was it matte or glossy. I saw another video where they said using parchment paper over the design gives it a different appearance than the Teflon sheet.
Parchment paper for matte finish - but after carrier sheet is off. Teflon for shiny
How many times can you use the mask? I got my paper out of Michaels it only came with one mask sheet
I would only use it once but I’m not sure that’s just my thoughts
As long as no ink has transferred to the mall, you can reuse it. I buy my mask from Amazon ..."Frisco" transfer mask..$20. 12"x50'..50 FEET! THIS IS VERY GOOD MASK..50 FEET for $20... You can't beat that!
Can you do a all over shirt with that vinyl?
This is sooo cool
Maybe create an offset.
What if you did an offset ? Small one
I def could have
Good video thanks
How do I get the Queen file?
You can get it here Check out My ETSY Store www.etsy.com/shop/DoDreamOn
Maybe cut default instead of more?
Is this image already made? Where do you find these images?
I did a white tshirt used dtv and the color ran all on the white tshirt
😍😍
You could have cut deeper In the settings
thanks
Watching UA-cam krystal
♥️♥️♥️
Turned out great but way too much work for me 🙃
Can i ask why the letters cut separate from the photo?will welding the letters to the photo make it easier?
Yup it definitely would have made it easier… I purposely did it the hard way…
Do Dream On thank you,im very glad you showed it tho🥰
I seen if you mask before weeding helps
I don't like it, I get like a white matte finish and the art looks weird 😕
Hmmm are you using inkjet this hasn’t disappointed me yet I LOVEEEEE IT!!!!!
@@DoDreamOn yea, inkjet
In other words don't use it. It's expensive too.
Siser DTV + Cricut Machine = terrible combination
Lol