DEUTSCH Connector custom wiring (Demonstration Video) | AnthonyJ350
Вставка
- Опубліковано 9 лис 2020
- Want to build custom harnesses with sealed plugs that are easy to take apart and service? Then look no further than DEUTSCH style connectors for your custom wiring needs.
Music by: LED Monster "Come Alive"
#DEUTSCH #Wiring #CustomWiring #WiringHarness
Subscribe for more automative tips!: bit.ly/sub2anthonyJ350
Watch my most popular uploads!: bit.ly/anthonyJ350howto
Check out my Amazon storefront www.amazon.com/shop/anthonyj350
Website: gofasthavefun.ca
Instagram: / anthonyj350
Twitter: / anthonyj350
Facebook: / aj350
Shop: www.amazon.com/shop/anthonyj350
E-Mail: info@gofasthavefun.ca
T-Shirt: teespring.com/en-GB/AnthonyJ3...
Music available - www.jinglepunks.com & www.epidemicsound.com
Intro - "Heartbreaker'" - Gloria Tells
Outro - "I just can't change my Emotions" - Basixx
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
DEUTSCH Connector custom wiring (Demonstration Video) | AnthonyJ350
• DEUTSCH Connector cust...
ANTHONYJ350
/ anthonyj350 - Авто та транспорт
Thank you Anthony. Good job. I agree, these are the best connectors on the market. These are used allot on Caterpillar equipment. The adjustable crimper is nice, but expensive $300 when I worked with them 5 years ago. Have a blessed and safe week to you and your family.
Thanks for sharing, didn't know CAT used them a lot, makes sense due to the harsh environment that equipment sees. Best wishes to you and your family as well!
I like those connectors very much. Great for removing components to access other work. That's a professional style of installation. In my opinion although, I prefer doing it to NASA standards and tining both the wires and pin cups. Then heat pin and slide the tinted wire in. I would recommend doing this method anywhere outside the cabin. Before sliding the rear seals and main connector, apply a pea size drop or more drop of dielectric grease. This will make the connector virtually corrosion proof.
Thanks for sharing!
That sounds like over processing. Crimp and go.
nice job bro
Thank you!
how do the non TE DT connectors hold up. i know they can save quite a bit of coin over getting the TE branded deutsch connectors. just curious if you've noticed any negatives
So far so good. If it's going to be in the elements I put some dielectric grease in the plug incase they don't seal as good as the original stuff.
Hi, I'm converting a few of my early 1994 Harley-Davidson connectors to Deutch. I discovered one of the ports has 2 wires going into it. I would imagine that trying to force 2 wires into one of the Deutch connectors is a "no-no"? In my case would it be best to peel back some of the insulation and soldier the two together and then use one port? Can't seem to find an answer to this. Thanks for sharing your thoughts and advice. I hope my above question made sense.
The 2 wires you want to connect to each other. They do the same thing?
@@AnthonyJ350 yes
@@kennethwise7108 You totally can, what gauge is the wire you're trying to combine?
@@AnthonyJ350 18 awg
@@kennethwise7108 you can use a 16 or 14 gauge pin to combine those wires and crimp them. Use a little electric grease to help it slip through the seal.
Wants to pop out because your jamming the seal inside the plug lol
Thanks for the feedback
“Cheap” and “Snap On” dont go together!
Sooooo are you calling me cheap???
I can't take it .... way to go trying to pin it backwards!!!! ... wow. Put the wire strippers down and back away slowly.
Thanks for the feedback!
Which part in the video are you talking about?
How else would you pin it?
@@AnthonyJ350 5:45 You knock the gasket out and proceed to pin (attempt) it from matting side
@@DVXCine Yup I made a mistake and realized it and corrected myself. Does that mean you have to comment in that manner?
You've never made a mistake with orientation of something you're working with?