Why THIS Engine is DOMINATING in MotoGP
Вставка
- Опубліковано 29 тра 2024
- In MotoGP, KTM, Ducati, Honda and Aprillia all have something in common, they all run V4 Engines. Yamaha is now the only team on the grid that runs an Inline 4 and an Inline 4 engine hasn’t won a single race in MotoGP since 2022.
Watch This Next: • The Engineering SECRET...
My Favourtie Tools To Use:
📧 Superhuman: superhuman.com/refer/foof8ao8 - Авто та транспорт
👋 I did miss talking about the pulses in the firing order allowing the tyre to recover for a crossplane I4. I also made a few minor mistakes on balancing between flatplane crank vs crossplane crank with regards to their primary and secondary balances. The feedback is appreciated and I will take it onboard and make better videos! Sorry about that all :)
Good video. since you cramped in too much in there, forgot to mention v also reduces the chance of torque twisting at crank level that helps V4 to make more torque allowing them to exit corner way better than inline4.
V4 engines been shorter helps reducing the aero drag and have more room to play guiding the radiator cooling airflow to the exit.
The V4 engines shape helps with the mounting points of the frame, now engines are used as structural part of the overall bike strength, not just a holding weight to screw. So design a frame thinking about the resistance to bending and torsional forces using the engine as a part of frame structure, the v shape make engineers life easier.
Big role in V4 advantage is the weight distribution, having the 4 cylinders so close to the front wheel isn't the same that having two of them in the center of the bike. Same as cars middle engine have taken the advantage over front mounted ones for so many years when it comes to lap time machines. There's some exceptions like the 911 or some crazy FWD Lemans proto but... Almost anything in racing designed cars have the engines mounted between the center and the back.
Yamaha already builds the worlds most powerful V4 !
The VMAX......
With a different firing concept to those mentioned
You didnt mention the RC45 or Panegali either......
All those fire 2 cylinders at the same time turning the v4 onto a 4 cylinder V twin in effect....... gaining midrange torque, for corner exits
( they sound AWSOME as well )
RC 45 sounds nothing like an
RC 30.
Did you ever wonder why the RC45 sounded more like a Ducati...
Honda vfr RC36v (1997 only) ROAD BIKE has 2 piece Cams so you can rotate each half 180° to "twin fire" your motor to make it run like an RC45......a 4 cylinder V twin......
I know as I own one ( factory Green, only year VFR750 was in that colour)
and have done it to my bike, and will never change it back !
The change is dramatic, the hp increase and torque curve change is astonishing compared to standard.
No less rideable, and more tractable down low, more "brutal" in accelleration
Meanwhile honda:
-Sells flagship inline4
-Race a V4 GP bike
-Not competitive in GP
-Fireblade sales still up
If Honda would get a V4 Fireblade out the door I think they would sell
@@pepperidgefarmsremembers92 I'd camp out at my local Honda dealer to get mine.
To be fair that bike is probably more about doing well in WSB
Because honda bikes are pretty reliable!
Honda is a religion... you cant stop the brainwashed zealots...
Little old suzuki did great before they got pushed out the door with an inline and yamaha dominated until they stopped spending money in motogp and rolled over and played dead!
Suzuki quit because they had to invest in new models.
You're on to something...
@@carlosandleon suzukineeded v-4 the inline 4 was blowing engines
Suzuki has been playing dead since mid 2000’s
@@jake88ci Suzuki used to run a V4. Before they quit GP the first time they raced the GSV-R with a V4 that varied from 60-65 degree V angle depending on the year. The bike was not initially competitive, but towards the end of its run was capable of winning the odd race. When they came back they switched to a crossplane crank I4 and at times it was very fast. At one point they were even out dragging the Ducatis down the front straight in Qatar but they were probably stressing the engines too much as they were never quite that fast in later races, likely detuned a little to make them last the season. Still faster than the Yamahas. The big issue now is all the aero and active suspension has allowed the V4s, mainly the Ducatis handle well enough that their power advantage far out weighs the Yamaha's handling advantages. Get rid of the aero and active ride height adjustment and I bet the Yamahas would be competitive again as the Ducatis would struggle to put the power down.
From someone who spent nine years at one of the big four, that was a very informative and accurate video, excellent.
Thanks mate! Glad you liked the video. I've seen a few comments pointing out a few mistakes in the vid so hopefully they weren't too offputting :D
I owned a 1983 Honda VF750F. It was Honda's original V4 design for racing.
1 note, a flat plane i4 ALSO has perfect primary balance. It's the secondary balance where it struggles a bit. The cross plane i4 has HORRIBLE primary balance and the same bad secondary balance of the flat plane. This requires it to have balance shafts and extra counter weights and THAT is why YAMAHA's i4 is heavier than a v4 engine. Flat plane i4 engines do not have that problems and are significantly more powerful than Yamaha's i4 motors. the reason yamaha went for the crossplane is the odd firing interval that is similar to a shared pin v4. By spacing the power strokes at irregular intervals with bigger silence gaps allows a more easily manageable power delivery both by the riders and the rear tire. As the tire has very limited capacity for grip, the gaps in power delivery allow it to recover better. That's an issue that comes from the delayed elasticity of tire rubber called hysteresis, it causes the rubber to have a delay in going back to its normal shape after leaving contact with the road. Put too much load on the tire too fast and it's over, you lost grip. An i4 engine, aka a screamer, has NO POWER GAPS and it will easily break grip, shared pin v4 engines and yamaha's cross plane have big gaps that allow the tire to recover. In terms of power, a v4 with separate crank pins for each piston CAN work with the same power delivery of a screamer engine as they can be set in a way that it fires every 180° like an i4. THAT v4 would completely blow the other v4 engines out of the water with its power. My question is, would that v4 lose its balance?
just say u watched d4a's video.....btw I have a crossplane
@@jefferson2214 apart from the tire thing, the rest were things I read before I discovered the video you mentioned. Some people do like to look things up and know a thing or two. The fact that you have a crossplane is irrelevant to me.
Great breakdown Vas! I can see a few points I missed that should be in there for sure. I know for next time :)
In all honesty I wonder if other teams and manufacturers have explored that in the past. There must be a reason why something like what you said hasn't been done yet. Maybe we'll see it in the future
@@absolutedan9173 which one? The v4 with individual pins for each piston? It would defeat the purpose of the conventional v4 which is the irregular firing intervals. There's no point in making power if you can't use it. An even firing v4 would be like a flat plane i4 on steroids. Lower friction, lower inertia, lower pumping losses with the same power delivery? They'll be insane.
@@vasilisgreen every thing, point from point is parroted from his famous video, but yes, there are people who knew about it before he made that video. Good luck in league of legends
That crossplane noise is just unbeatable, its heavenly at WOT.
The more I listen to them the more I love them
Wot at the top of 6th. @ around 190 mph the r1 sounds absolutely incredible. Especially with a short can like my racefit. It's truly incredible
I've been wanting an R1 with the cross-plane engine for years but I've too much invested into my ZX10R to make the jump.
@@WayneSmith-zx3tf ull never go back to the kawi
Nah. Aprilia V4 with a GP exhaust sounds the best.
holy crap, you're probably the most underrated analysis moto guy ive ever seen. your production level is much better than most of other channels, keep it up!
Thanks mate! Glad you liked the video. I did miss a few bits out as others have pointed out so I need to make sure i get some better reviewing techiniques but it's getting there :)
Shame about the conclusions
Great vid and analysis! An excellent point on how all this racing is just a marketing exercise. Suzuki left MotoGP cause it wasnt profitable, they make more in ATV and Boat engine sales than they do on motorcycles (at least in North America). Yamaha is just holding on, there isnt really a reason for them to spend all that addition mkney on developing a new engine when they probably outsell Ducati and KTM with their piano sales ahah. Subbed
Thanks mate! Glad you like the video and thanks for the feedback. I always want to make sure i keep getting better, the video wasn't perfect but they are getting better each time i post. Is there anything you'd like to see in the future?
They are giant corps, that make dull souless machines. Of course they outsell a tiny company like Ducati.
The Jap companies don't care about making fun motorcycles, that's why they don't deserve our beans!
Everything will change again in 2027 when they go back to 800cc.
In my opinion, the motogp's decision to standardise the ecu in 2016 helped ducati immensely. On the other hand, it hurt Honda the most and then Yamaha.
Please add more info how it affected Honda and Yamaha😊
Yes. The electronics magneti marelli were familiar with ducati for a long time and most of their engineers are in ducati and helped manage the electronics, where as japs could not get such expertise and lost way. Ducati was no where near the japs without the magneti marelli.
@@radhamanohar2307 Honda had a torque sensor that allowed their own R&D ECU electronics to control more and support a more sophisticated physics model. The standard ECU doesn't do that so puts everyone on the same lower level IMHO..
Not aware of the Yamaha GP situation, though their production ECU/IMU/TC is so good that tyres that wouldn't pass a road MOT test can still go quite fast on circuit, i.e. the IMU/TC is able to overcome the limitations to a considerable degree. That suggests a serious capability on the electronics, above the standard ECU used now.
OH ..!!!! Another Japanese bike supporter ........crying their little hearts out !!!...Get a life ...!!!!!,,,There is many more Ducati victories coming ...!!!
@@kingalfred3902 not so much. Wait and see. The Japanese will come back. The issue is with fossil fuel ban and waste of money on further development.
Did I miss it? What about aerodynamics? Isn’t the V4 narrower? That should help tremendously
The V4 is narrower yes but to my understanding the radiators are the limiting factor in the width of the bike or how narrow they can be. But you are correct the ending itself is a lot narrower
@@absolutedan9173 Better tyres enable insane lean angles require narrower engines.
I have an R1, I can say that my engine is the same volume and configuration as GP bike 😊
I would love an R1 soooo badly!
So ???
2 little complements:
The reason for the 90° degree crank is that it creates a irregular firing order, which gives a bigger recovery window to the rear tire (the tire has more time to care about cornering when it is not „stressed“ by the ignition strokes), which improves traction during corner exit.
In a race bike, the center of gravity should not be as low as possible. A high center of gravity gives advantages in cornering. With the same leaning angle, you can compensate more centrifugal force when the center of gravity is higher.
A higher center of gravity is bad for acceleration, because the tendency of doing a wheelie is higher, but this is compensated by the different lowering devices.
The front end lowering devices are banned now in MotoGP.. since end of 22, I believe.... are you talking about some other loophole devices?
@@paulhope3401rear ride height devices are still allowed.
@@marquisbrown5060 I see, thanks.
Good feedback and points. I forgot to include the recovery window in the video candidly. I did also do a review on the holeshot and ride height devices as well :)
I thought the closer the fring pattern meant a smoother impulses to the rear tire? Better for traction.
Glad to have found a young channel with lot of potential! I always enjoy seeing the evolution of interesting channels! And to add to the topic, I. A Yamaha fan and no matter if they win or loose I always gonna love that inline4 crossplane engine!
Great Video!! Keep it up with more such info.
Good stuff Dan ! Keep at it and channel growth will be inevitable!
Thanks Cyrus! Let's hope so ;)
Wow, what an awesome vid! There's so much absolute junk out there on the internet and what an excellent explanation especially for the Motogp newb. I instantly subscribed! Best of luck on your channel, you're a great presenter.
This is a quality video. Here's to your growth
Thanks Ravager! I appreciate it. Anything you'd like to see in a video?
Great content mate - thank you. Maybe invest in a mic to avoid the "echo" effect in your audio track. Just a minor thing. Keep doing what you're doing and this channel will grow.
Thanks Joseph, I appreciate the feedback. Ironically I have a mic already believe it or not I just don't have anything in the room to absorb the noise :D - I will be investing in some better production items soon :)
From my understanding, the crossplane inline 4 in the Yamaha has worst primary and secondary balance and less power than a flatplane inline 4. The advantage of the crossplane inline 4 are the interrupted power pulses that are presented to the rear tire. The interrupted power pulses allow the tire to rest more in between power pulses vs a flatplane inline 4's even power pulses which don't allow the tire to rest. A 90 degree V4's firing order doesn't have even power pulses and the interrupted power pulses are one of the advantages of a 90 degree V4.
Also, an inline 4 has a weight distribution advantage because a lot of the weight is over the front wheels which helps with front end traction where a V4 is compromised because only half of it's weight is over the front wheels which compromises front end traction. Honda is using a V4 in their MotoGP bike but as you can see, they're not doing that well. Ducati's advantage is the aero work, which keeps the front end planted under acceleration, they've been working on for the past decade that has finally paid off.
Good points Petrol, you're right. I'm making some adjustments in the description to clear some points I missed :)
Secondary balances are worse on flatplane
please do more videos about bike's engines and for smaller cc's engines too like 150cc. im saving money to open bike repair shop and still learning about their engines from small to big cc
I learned something today! Thx! 🙏
I can attest that the Wisconsin V-4 absolutely dominated back in the ‘50’s when we used it on a John Deere hay baler and a wooden tanked orchard sprayer.
Fascinating stuff, thank you.
Thanks Glyn, glad you enjoyed it
Nice video but you forgot to mention the 2nd harmonic of the inline 4
and the fact that the Yamaha R1 uses a counterbalance shaft to stop that problem.
That increases the overall crankshaft mass & friction, robbing power.
Very well explained mate!
Thanks Gonzo! I missed out a few key points which I need to update in the video description. I'll make sure I get better at these as we go
Good job on the vid!
One of the most informational and interesting videos I have ever seen. Great work Dan, keep it up!
Thanks Skywalker (love the name) - Glad you like it! Is there anything you would like to see for a video?
@@absolutedan9173 thanks Dan! I would love to see a video explaining how supercharged motorcycles work
Forgot to mention the rotation of the v4 engine oposite to the rear wheel to cancel centrifugal forces to help with handling
Alex Rins says aerodynamics makes more difference on a MotoGP bike than engine configuration does, lets see how he goes on the Yamaha! 🤞
Interesting to hear. Let's see what happens in 2024
and stoner proved it wrong
I like using telemetry to advance my performance and you said it right,if they switch,then they would have to start with a blank file of telemetry for engine parameters. No previous data to load,overlap,analyze and go from. Yes,i'm really interested what will they do. Anyway,good video,nicely explained,recommendable.
Cheers!
I think you mean Data Logging, i.e. recording data on many sensors as the bike travels, for subsequent analysis. Telemetry means sending data from a vehicle, potentially making adjustments to some parameters and that's not legal in bike racing.
Formula One does that but the capability is regulated and probably the reason why the driver has so many controls on the steering wheel.
On bikes the buttons are likely to support control of traction control, e.g. Aprilia RSV-4, or alternate ignition maps/modes, e.g. Rain or Dry, where the rider can choose as they ride. Having spare attention for much more than that is hard at racing speeds and has the potential for disaster beyond a missed gear shift.
The moment of inertia argument doesn't wash. The v4s typically have an external flywheel which allows them to tweak engine inertia for each track, so it would be easy for them to increase it and match the inline 4s. All motogp bikes also run their engines backwards to cancel out the wheel inertia, Ie to reduce overall inertia.
Fair point. This part of the video came from the research I had done but it might not have been fully accurate with modern tech now. I'll do some more research on it :)
In a 90 degree V engine the primary forces produced by the pistons moving back and forth act as a pure rotating mas, therefore it is easy to balance this force with an excentric mass in the crankshaft.
Excellent analysis
Thanks Alistair
I've always favored the I3 - mostly because the sound is amazing.
I miss the 20v of the older Yamaha R1. They just seemed to react better to throttle inputs.
Can we expect v5s becoming common in the future. I think this is possible.
🤔
You never know. a V5 may come back into the spotlight!
Lmao No
The rules state the biked must have 4 cylinders. So unless ducati develops a v5, it probably won't happen.
@@r6guy That's so true!
That cross plane Yamaha R1 is the sweetest bike around
Brilliant explanation!
i always thought honda has an Inline 4 in their gp bike... can you explain why they then have these power struggles compared to rest of the v4's? Is it just missing in experience in R&D?
Honda are the market leader and can lead in R&D too. It's not the peak power that determines the outcome rather how the power is made across the rev range. It's complex physics with the bike leant over and getting on the power out of the corner. So suspension and tyre grip limit what the engine can achieve...
Nicely explained!
Thank you! Glad you like it!
Very good video
An interesting view, and goes partway to explaining the fundamental differences between the V4 MotoGP bikes, and the in-line fours. But you don't tell the whole story, and I feel these other aspects are worth mentioning. Firstly, whereas the in-line four has a longer crankshaft, and more main bearings (as you say) it also requires a balance shaft (or two) when fired like a 90 degree V engine (as mentiond by Vasilis below). (This is because the cross-plane in-line four may well FIRE like a V-twin, but its forces aren't in the different directions of the 'real' V4). This is where the extra rotational weight comes in for the 'crossplane' four, and often one balance shaft (of two) is required to rotate at greater than engine speed, bringing in other inertial and physical limitations.
The second point is that, although the Yamaha engine is "larger" in terms of width, it is also shorter/smaller front-to-rear, allowing for a longer swing arm, and attendant suspension and power-delivery advantages. It also has its mass 'centralised' more than the V4, when viewed from side on, making it easier to position the COM closer to ideally, in terms of height, and front/rear. The third aspect you didn't include is the 70 degree(?) offset between the two side-by-side 'V2s' of the V4 Ducati configuration, introduced about seven years ago, and shared with Aprilia in recent years, and no doubt associated with Aprilia's improved performance in the last two years. The Ducati road V4s share this design, with its claimed benefits in tyre 'loading', heat and wear. But of course this design does not share crankpins between the two paired cylinders, as they are slightly offset. A dynamic cutaway diagram of the Ducati engine in your video briefly shows this characteristic.
So there is 'far more to this than meets the eye', and a second video covering these subtler aspects may be worth attempting. But thanks for this video - it has helped people understand this perplexing topic, and warrants a follow-up to 'flesh out the detail'. This initial video could serve as an introduction to a subject more complex than first described. As to the R1 road model - apparently this model is being dropped by Yamaha next year, so the race bike's connecton to their road model may be changing, and rumour has it that Yamaha DO have a V4 engine for their GP campaign.
Johnny Rea's not enjoying the crossplane Yamaha superbike as much as his (conventional in-line four) Kawasaki at this point, and poor old Quartararo has risked his neck for many years trying to win on it in MotoGP. Honda followed Ducati from a 75 degree 'V' to a similar 90 degree years ago, but without (as far as we know...) the 70 degree offset between the two 'sides'. That may be next year's Honda, if they want Marc back! Hang onto your patents, Ducati...
i think the ducati v4 engine also uses reverse rotating engine compared to conventionally used, so when you open fully the trottle then it help ceeping the front wheel down,, and this allow giving more trottle before wheeleing. aka lift of of frontwheel. You notis this sitting on a bmw boxer engine opening the trottle, then the mass of the crank pull the bike to the left. by accellerating mass from the crank.
Man! I love your channel on super bike 🏍️ keep up the good work champ 🫶🏾👍
thanks mate
One additional aspect, as far as I know, is the possibility in V engines to change the external flywheel on demand, in order to tune the power delivery to the rear wheel. The inline 4 instead has an internal flywheel due to size constraints.
I think the V4 has an unexpected bonus as it is balanced front and rear and acts like a stabilizer - gyroscope
4 cylinders in a bank with crank rotation, can't match that effect
Because the riders are pushing everything to a radical extreme, that effect, becomes very substantial
Awesome video.
Thanks Viktor!
What a clear concise well spoken topic. You are a credit to the English language. I cant abide these sites with some robotic babble.
The reason V4s are successful right now, is because they are in the bikes with the best aero and electronic packages
It's nothing to do with the engine config, as the huge number of Inline 4 race wins and WC's over the last 20 years prove.
Now I understand why Marc Marquez said he has to change his riding style after switching to Gresini Ducati.
Honda is V4 same as Ducati and he is still flipping bike like a coin nearly every race weekend, so no much change here 🤭
3:14 This is not necessarily true. Crossplane I4 has worse primary balance than a flatplane. The only benefit to a crossplane is the power gaps which allow the rear tyre "recovery intervals".
Correct me if I'm wrong, but crossplanes need a counterbalancing shaft. Adding weight and complexity.
At high lever race technology the advantage goes back and forth. 😊
I think you missed a key advantage of the V4 (unless I missed you say it). You mentioned it is smaller and allows it to be moved to the right location for vehicle dynamics but the key advantage is that it's significantly narrower, which has a huge advantage on the bike's aerodynamic drag force and also allows the fairings to be made in different shapes for aero efficiency and potentially downforce.
(Perhaps) less crank bearings in a V4, but more cam bearings, along with more potential weight from the two extra cams and one extra cylinder head. I also can’t see why a V4 would produce more power than an inline four or flat four. V4s main benefit is that it’s narrower.
Make a video on the Ducati V4R engine, it's stunning!
The V4R is my dream bike, sexy, exotic and awesome!
I know I'll buy one soon!❤🚀
I love this one all physics and theoretical advantage. The real world is the crazy bastard with unbelievable skills that rides it
I mean, you're not wrong hah
the thing is, most of the v4 now, with the help of aero devices have similar racing line to inline 4, with the more power, it will launch itself faster than inline 4. electronic have major part in it too. I dont think inline 4 will have any chance rn, unless the motogp really goes back to 800cc ish that have been rumour
Could very well be. If they do drop the cc again it would be really interesting to see what Yamaha decides to do. I wonder as well will they even stay in MotoGP?
800cc was a disaster and cost of an entirely new bike is absurd .HONda will want 800cc to pressout small euro manufacturers ... honda= worst engineers in motogp so have dorna hinder penalize better manufacturers
Yes, ur right bro, it's been a long time that yamaha that shines their cross plane technology, and it is very hard to jump up in v4 and waste money for nothing like a scrap, the better way for Yamaha is to maintain and improve their gp bike for future racing and it can sold affordable
Hopefully they'll be able to perform better next year!
Just what I needed as the Ape sit in a -10f garage.......:(
You dun man!
Subbed
Thanks mate! Glad you liked the video
1:14 When you flip the car in GTA.
Can the crankshaft be split in the middle 2 pieces inside an inline 4?
Honestly I'm not entirely sure to be honest. My intial thought would be no but I'm no engineer
Something not mentioned is the crossplane R1 production engine requires a balance shaft, inevitably this is a drag on power and of course adds weight and heat load. Not sure anyone outside of Yamaha knows if the M1 has a balance shaft but I suspect it must for the same reasons as the R1. OTOH if it turned in the opposite direction to the crank it might mitigate the inertia of the longer I4 crank somewhat.
Where the crossplane excels is in the transfer of kinetic energy from one cylinder to its neighboring cylinder (as one reaches TDC or BDC the next one is at maximum piston speed). But the V4 has a similar trait, compared to a standard 180 degree V4.
Thanks for the feedback. I'll make sure i do more research for these types of videos in the future!
I thought the crossplane was to smoothen out torque distribution
@@carlosandleon exactly the opposite. If you map out the power pulses over 720 degrees of the crank, and compare to a normal 180 degree crank you will see the difference.
@@sburns2421 Well yes but Yamaha specifically states that they did this to smoothen out the inertial torque of the crankshaft.
@@sburns2421 ua-cam.com/video/oEXUrO5wYcE/v-deo.htmlsi=CZCm15-yjeW4wpnJ
Best video have seen today
How about a boxer flat 4 engine like a subaru?
could that fit in a MotoGP bike?
Given the two different riding styles need for the two engines, it would seem like another big factor would be tires and the maximum grip level the tire can provide under any given conditions. With the inline four utilizing higher cornering speeds it would seem to be at a disadvantage with tires that provide less gripe overall, whereas the V4 is get in fast get out fast where the bike is more upright when on the brakes/throttle and slower when leaned over, which would appear to be better given the same low grip tires. Hearing tons of complaints from the Japanese riders about lack of grip. So is the V4 and the associated riding style just able to utilize the Michelin tires better?
Could very well be. Tyres do make a huge difference!
Because development from 6-8 work’s Ducati’s gives unlimited feedback.
At this point that Yamaha is discontinuing the R1 in the euro market do you have a different opinion now ?
Never heard anyone suggest that a V4 has perfect primary balance. Famously they don't, they almost always have balance shafts because of that.
I think the point is not only winning the race, they need to win the market as well.
IMO on top of the reasons given in this video, a bike with i4 engine has certain 'bigger/wider' looks to it compared to slim bike with V2/V4 which some people said it looks very menacing and they like it. For me personally it's about the heat management as my country can be very hot some time and having a furious engine right below my seat would make for very unpleasant ride.
So yeah, despite V4 dominating the race, I'm glad that Yamaha sticking to their i4.
Yeah here in Australia the v4 Ducati run very very hot in our summer time
not to mentions that the r1 shreds in wsbk
V4 for smoothness for me Dan
A V configuration as well as horizontally opposed from an engineering stand point are far better balanced mechanically than any inline 4. The weight is also lower if you compare a L twin to a parallel twin the L twin is Dynamically balanced better for less vibration & with 1 cylinder forward on the L twin the weight is lower & so appears much lighter. Inline 4's are notoriously top heavy. Because the engine is better balanced it will also last longer.
V4 for smoothness for me Dan.
Love it! If I ever had the money a V4 Panigale would be sweeeeet
Awesome 🍻
Thanks Daveo!
Does Yamaha have a V-4 production model? Could they develop a V-4 in another series?
Not 100% in all honesty. I didn't think there were but I could be wrong
i believe yamaha is developing a V4 engine right now its clear that the way forward for 2 wheel road racing in the 1000cc class is the v4 platform
I’m surprised you didn’t discuss how Ducati ‘s v4 is different from the others and how Ducati lobbied motogp for a rules change to give them a power advantage. This Ducati’s dominance
In all honesty I didn't know
I4 also puts more weight on front tire
I’d prefer the Honda’s V5 engine. One of a kind and dominating engine.
I'd love to do a video on this soon! Such a cool engine
Torque, torque, and torque!
I have never read a peer reviewed ASME Engineering paper that proves a V4 can be more powerful than an inline-4.
Or the other myth, that the V4 has better torque, and a better power band.
Arguably the V4 can have more optimal flywheel affect - but again, an inline- 4 crankshaft can be designed with the same flywheel inertia.
As for the size of the respective lumps - both architectures have problems squeezing into a motorcycle frame.
The width of the inline-4 is not a deal killer. The M1 and GSX-RR are only a few mm wider. It's the rider drag that is more important.
Why are the V4's proving the better answer at the moment ~ because that's where the big $$$ are being spent by better Engineers and their computers.
Once i read an article saying that right now a 3 cylinder may be even better. What do you think?
a 3 cylinder has it's place. If they change the regs in 2027 we might see somethign like this! Would be pretty interesting and being able to have the best of both worlds
@@absolutedan9173They already use a 3 cylinder, in Moto2
You could do with more soft furnishings in that room to deaden the echo!
Working on it hopefully soon :D
What engine do you prefer? A V4 or an Inline 4? Let me know in the comments below👇
V4 for the track and Inline4 for the street
More torque. Torque wins. Same thing happened in Motocross when teams moved from 2stroke to 4stroke.
hold up, hold up.
are you telling me a I4 Crossplane vibrates less than a I4 Flatplane?
Isn't the flat plane perfectly primarily balanced, unlike the cross plane that has neither perfect primary nor secondary balance, but is better at handling for the larger recovery gaps between engine pulses transfered to the tyre?
You are right. A fair few people mentioned this to me and It's something I'm going to make a couple of notes on in the video description. It's all good feedback
@@absolutedan9173 I appreciate it, man. the video was entertaining, I liked it. keep it up!
Imagine if Suzuki still in there? Suzuki was the perfect race bike which can itself preserve tyres... That last corner move by Rins on Suzuki at 2019 BritishGP can't be done by a bike rather than Suzuki...
I'm sure that if DORNA wasn't the clown show that it is, Suzuki would still be there.
I wonder how many people would no longer buy the R1 if they change the engine in the motogp bikes to be competitive. I would argue that it the GP bikes don't need to have much in common with the street bikes, besides the name.
Also, don't Yamaha counter-rotate their crank for better overall moment of inertia?
Nice video, but there is nothing inherently different in the ability to create power in a V vs Inline engine.
In fact, if you consider the potential cooling disadvantage of the rear two cylinders it actually has a slight hill to climb
I don't think you know as much as you think you do!
V4's are not "smaller" than I4's, they are just narrower, allowing the bike to be narrower and giving better packaging options. The engines occupy the same volume in space (in fact, the V4 will occupy MORE space because it has two valve trains, double the cam chains etc). It's just the space it occupies is in a better place.
I also think it's very arguable that V4's produce more power! Not necessarily, this is not an intrinsic attribute of a V4 design! I4's dominate the horsepower battle in cars, what hot hatch did you ever hear of that had a V4?
There is no reason that with enough money and R&D an i4 bike could not dominate Motogp again, and/or produce the most hp.
Yamaha have announced the R1 is being discontinued and they will probably withdraw from MotoGP also. So that's another reason they won't spend the money to go V4.
I never claimed to know anything or be an expert. I've just done research from multiple sources. I'm getting better at the research I'm doing :)
@tosgem I'm always careful about the myth.... "an inline-4 crank is too long /heavy for the horsepower = too much flex/ vibration"
The most powerful engine ever in F1 was the 1983 BMW 1,499cc M12/13 turbocharged inline-4.
Unlimited boost! 1,400bhp. 933bhp/liter (!)
Way more overstressed than the MotoGP Yamaha normally aspirated 1,000cc inline-4 @ only 300bhp/liter.
And the BMW's crank was not a problem.
As a licensed Mechanical Engineer, I know that an inline-4 can be designed to be just as powerful as a V4.
It's just a matter of crank and block bearing design. The spacing of the main bearing journals being the most important.
I cannot remember the M1 being a hand grenade - only that smokey Rossi blow up at Mugello.
So, it's not a crank problem, eh?
What I think it is ~ that Yamaha have not spent the $$ on research to develop the I4 engine.
Combustion chamber, Pistons, Cam, Valves, Ignition etc.
Or, they just do not have the brilliant engine technology that the Italians have at the moment.
I betcha Gigi and crew, KTM and Aprilia could build a powerful inline-4.
But that's not what they sell. After all, MOTOGP is all about advertising what you sell.
Why Yamaha will never build a V4. They don't have a V4 crotch rocket in the showroom to sell. They are pushing their weird crankshaft!
the weight advantage is small and kinda irrelevant cause as you know the rules have a min weight. also a main plus for v4s is that because they have less width engineers often install exterior adjustable engine parts that can change from race to race according to track needs. its a lets say window to the rules. but above all as we saw inline 4 can be competitve but that idiotic rule with standard ecus that are made from an Italian company suited for v4s its totally anti racing...
I'd love if yamaha brought out a V4 sportbike. You know they would kill it. They can keep the R1 but give us a RV4
This has nothing to do with V-engine or 4-inline. It has everything to do with Ducati design which is simply unrivaled, unmatched and unstoppable. Hard for many to swallow (especially for Honda) but it’s true. 😜
Its probably been pointed out but Honda's motoGP has a V4 but their road bikes have inline 4's Yamaha can go to a V4 in motogp as well, but its more likely that they wont because of the other reasons listed rather then marketing
This is also a fair point. They could very well do with not much affecting with marketing
Great point. But I'm sure the majority of Honda fans would love to see a V4 version of the CBR or a sportier VFR. I've got a 94 VFR.
@@kanebaker4294 A VFR in a sportier frame or even naked bike would be MONEY i would sell my soul for one of those!! trying to find a VFR/intercepter is such a pain they are super rare around my area gotta go to like cali or something but now that i looked not that much money for one but 3500 for a bike with 75,000 miles...like yeah its a honda but...oooof that would be pushing it for me...though its an 02' so still gear driven cams i think so that'd be money as well...great now i need one hahaha
so why do rally cars all use inline 4's. would the same benefits transfer to a car, in using a v4?
It's a good question. In all honesty i'm not sure. With something like rallying I wonder how it differs with their driving style
Win on Sunday sell on Monday days are gone. The 0,1% who can get 100% out of a bike on a track does not apply to the street anymore. Inline motors just have more torque in dally driving where you need it.I can beat new bikes on my old 2001 bandit 1200 on back roads because it pulls like a tractor out of every conner. I find it fun messing with guys on new sport bikes.
Note: KTM officially states that its motoGP V engine is almost 90° without saying the exact angle.
The search for maximum compactness is probable without losing the advantages of this configuration.
why no vr4 engines in motogp?
What is being sold by M0t0GP drama is Duc4ti's struggle, but when they are competitive they come together, even new teams, even teams that previously didn't dare to take part in competitions before 2016, suddenly become very professional.
The vast majority of the commenters here, like me, are not professional racers and most of the advantages/disadvantages of either engine make no difference in our lives except as it concerns bench racing. This is why the R1 cross-plane and the V4 engines are so popular. We ain't racing so let's get the best sounding bike we can get for our own auditory pleasure.
To be clear, I'm also not a professional rider :D