@@VespaMotorsport is it steell r plastic the trim got a new gts y day trim is damaged 💔 o miles on it build quality is crap on them , what 2 u use 2 get the scratches out the trim best wishes from Durham England 🇬🇧
I have that same bike, 2007, with the same body damage minus the dent. Unfortunately I also cracked off the corner of the leg shield (pice where the left lower screw goes) and just got your quote back for over $500 since the panel has to come from Italy. Ouch. Beautiful scooters but dang expensive to repair. I think I may let the broken corner piece give it some character. I will though, be replacing the trim since I lost a huge piece. Thanks for the 411 on how to do that and for the part! Replacing it with the black trim for a nice clean black on black look. I hope it's not as hard as some say. And the side damage...well I ordered a nice racing sticker for that too. :D
Thanks A lot Robot! Bro this Tutorial it’s 27 mints It took me 2 hours to put the Black trims I ordered from you guys! and I still need to put the pieces back! 🤪😂Great video!!👏🏽👏🏽
@@VespaMotorsport Ηello i have a piaggio beverly 200 model i have around 150.000 kilometers made so far ,the last days was a little hard to fire up the scooter i thought it was the battery,i change it the same again i opened the transmition box to see if was something blocking the engine and i noticed that the crankshaft was almost impossible to move by hand even with the spark plug off the engine,i want your opinion ,can i check something?.The motor has oil and water fluid as i always check them.Thank you and merry christmas,happy new year
Oh yes! thank you so much for this post. I had removed mine to give access to replace the GTV Starter/Kill switch. I thought I'd popped off three sockets & couldn't figure out where the hell they came from. I've just watched your video & there they are, accessory connectors, how would we know? I've spent hours wondering how I had unplugged three connectors & where from? Brilliant video. Thanks. John Wilcox Cornwall UK Oh, I would like to see a video showing how to unplug the various connectors, It's like no two are the same, very confusing to a home mec.
Can you give me an average cost for that? Since I can't make it to San Diego, I don't want to get burned locally. My damage is pretty similar. Without having to paint the entire rear. Thank you!
JEEEZ had to use JB WELD on quite a few dirt bike engine cases over the years. Hell, even rode my KLR 650 45000+ miles with a dime size'd hole I filled with JB weld. If done right it will hold for the life of the scooter, maybe even the life of the owner.
Mate, I can not thank you enough for those videos. You're a legend!
Glad you like them! Thanks for watching...
@@VespaMotorsport is it steell r plastic the trim got a new gts y day trim is damaged 💔 o miles on it build quality is crap on them , what 2 u use 2 get the scratches out the trim best wishes from Durham England 🇬🇧
Your videos are really helpful. I think when my warranty runs out I’ll be using your videos.
I am so happy that I came across these videos... Thank you robot!
Very Thorough! I am working on a 2017 GTS and I had no idea how to remove those parts. THANKS!!!
You guys are a life saver! I learned so much from your videos. Thanks Robot!
Very helpful how-to video. Thank you very much. I was shocked by the slobby Piaggio quality control.
I have that same bike, 2007, with the same body damage minus the dent. Unfortunately I also cracked off the corner of the leg shield (pice where the left lower screw goes) and just got your quote back for over $500 since the panel has to come from Italy. Ouch. Beautiful scooters but dang expensive to repair. I think I may let the broken corner piece give it some character. I will though, be replacing the trim since I lost a huge piece. Thanks for the 411 on how to do that and for the part! Replacing it with the black trim for a nice clean black on black look. I hope it's not as hard as some say. And the side damage...well I ordered a nice racing sticker for that too. :D
Thanks Robot. Just changed the trim on my GTS300. :)
Thanks, I crashed my GTS 150 a while ago. Just got it out from the body shop with fresh paint on both sides, now gonna do the trim replacement :)
Top Guy - great video - thanks for showing how to do this. Very helpful. Pete in UK
Thanks A lot Robot! Bro this Tutorial it’s 27 mints It took me 2 hours to put the Black trims I ordered from you guys! and I still need to put the pieces back! 🤪😂Great video!!👏🏽👏🏽
Most of this stuff can be quite tricky the first time you attempt it. Robot makes it look easy!
@@VespaMotorsport Ηello i have a piaggio beverly 200 model i have around 150.000 kilometers made so far ,the last days was a little hard to fire up the scooter i thought it was the battery,i change it the same again i opened the transmition box to see if was something blocking the engine and i noticed that the crankshaft was almost impossible to move by hand even with the spark plug off the engine,i want your opinion ,can i check something?.The motor has oil and water fluid as i always check them.Thank you and merry christmas,happy new year
Oh yes! thank you so much for this post. I had removed mine to give access to replace the GTV Starter/Kill switch. I thought I'd popped off three sockets & couldn't figure out where the hell they came from. I've just watched your video & there they are, accessory connectors, how would we know? I've spent hours wondering how I had unplugged three connectors & where from? Brilliant video. Thanks. John Wilcox Cornwall UK Oh, I would like to see a video showing how to unplug the various connectors, It's like no two are the same, very confusing to a home mec.
Great video and camara work. Where did you order the engine case from? I live in colombia and there isn't a market of those around here. Thnks
Love your power screwdriver tool. What brand is it?
I have a 2016 GTS 300 I hope this video covers mine. I am very worried about replacing the trim
Awesome video, just what I need to do, ty!
Can you give me an average cost for that? Since I can't make it to San Diego, I don't want to get burned locally. My damage is pretty similar. Without having to paint the entire rear. Thank you!
Nice content!
Is there a preferred polish when trying to brighten up that trim?
I've got a question Robot , is the trim on the gts the same on the gtv?
Thought about changing the trims on my gts 300. After seeing this great(!) vid - not anymore :D
Glove box didn't open. Am I in trouble?
Thank you very much for thsi video
Always pro !
Looked like it was a total loss, salvage title?
Robot is awesome
Party on Wayne😆🤘
Robot, would you like to work in the vespa plant one day?
JEEEZ had to use JB WELD on quite a few dirt bike engine cases over the years. Hell, even rode my KLR 650 45000+ miles with a dime size'd hole I filled with JB weld. If done right it will hold for the life of the scooter, maybe even the life of the owner.
BE ADVISED! Remove the Foot Pegs. I broke the Floorboard during the re-install trying to "pop" the Floorboard past the aft end of the Foot Peg.
Other than that, Super Video. I could not have replaced the Legshield Trim otherwise.
I want that hat
Just got a new 1 no miles on leg shild trim damaged they r f rubbish no more of them had it with vespa
Just tape up scooter and paint it’s a bit of trim all that for trim