Will definitely be looking forward to this series a lot. What I will recommend is a shift kit for the tranny if you're looking for firm and not so lazy shifts, instead of bumping line pressure. That's the way I have my mercury set up. My shifts are firm and quick underload because of my adjusted accumulators and plate passageways, but my tune still has fairly stock pressures. I'm able to have great engagement and shift feel without bumping pressures.
I had the Livernois tune done to my 1.5L ecoboost and it is putting out 260lb/ft at the wheels on 93 octane! (I am kidding) ;) If I did that there would be a bent piston rod in about 3 seconds :)
This is great man... A lot of guys don't/won't understand why we would mod something like a town car and "waste money, time or effort"... But thats alright. This is America and they don't have to. 🤘 .
did a dyno on my 07 Tahoe after I put a low lift cam in. Biggest mistake was tires were s rated. once I went to 127 mph I develop 3 big wrinkles not to mention my cats were getting too hot. So after 3 pulls I was done for the day. I only got 300 hp and forgot the torque values. Going to put long tubes on and delete the rear o2 Sensors and go with 93 octane. Eventually I want 450 at the wheel so I will need to install a pro charger to get that.
my 01 has 4.10 gears in the back I'm still waiting on my 2300 rpm stall converter to come in so when I put my comp cam stage 2 cams in it will be ready to have a full Dyno tune my exhaust is side exit true dual flow master super tens under the front doors and I have fun being a total off set to regular running 32 inch all terrain tires though it is still funny when I fly down the highway people still slow down and pull to the side thinking I'm the troopers that patrol the area
It was fun watching this video. Thanks for letting us ride along with you! Numbers were a bit low but you are finding out how and what it takes to improve them. From an enthusiast standpoint that is what it's all about. I think that Lincoln will have some surprises in store. Enjoy the ride brother!
Look in the paradox mufflers. Depending what you want to do delete the resonator pick a paradox muffler They have some of the best sounding mufflers. Or looking to varex by X-Force and I have quiet or loud on the fly.
If you're looking for power, id add a turbo on it, port the intake and heads, put a set of headers on it, go with a slightly bigger set of injectors, add a cam, tune it by advancing timing and adding fueling, get the perfect AFR, tune the TCM to optimize the shift points, and run her on 93. Those 4.6s are stout bastards. They're akin to a Chevy 350 in the amount of beating and abuse they can take without giving any problems.
Closed hood dyno should be more accurate..unless they expect people to drive with no hood/hood up everywhere. Cools better than a closed hood obviously.
In my opinion the limiting factor on the 4.6 2 valve is the valve to piston clearance. I had used the Trick Flow heads that moved the valves to the deeper side for a bigger cam. It was all good until I dropped a valve so that came to an end (took them 1 year to make my heads, nah I'll pass). Next time I'll just use aftermarket pistons...
If it's rated at 239 That means it's right on the money because you got to expect 15 to 20% drivetrain loss and I usually cut the difference unless it's in that truck at 18% and 18% of that would be close to 190 to 195 rwhp.
Me love the tune on my 2014. Got a quality tune from a reputable vendor, especially since I have an automatic Mustang. Generally I leave it on 87 tune and set the shift fitness to stock pressures. Runs around a ok. Upping the line pressure makes bark more but introduces a light low speed driveline clunk, which is annoying.
i used to drive Crown Vics as taxi for quite some time. Somewhere around 1.5 million in them. 30 years. Love the way your car sounds. I would enjoy driving it, too. Best riding cab I ever rode or drove. Thanks.
3.73 gears are a step in the right direction for sure. But on a heavy car like the Town Car you might wanna consider 3.90 gears or even 4.10 gears. These modular motors prefer to rev. You might want to get the Mark VIII torque converter and add a shift kit for firmer shifts.
Theres alot of little things that improve performance from cold air intakes - throttle bodies - injectors - but not sure if 93 octane will add anything ! It does sound different after that last tune tho !
So ...the list. What is beyond stock as of now? Gonna ditch the speed limiter? Lol liking the insider view. Keep up the fantastic work brother. We appreciate it Greatly.
@@GodBlessedAmerica is it a race truck or going to be? Or do you haul alot? If not id probably just look at a catback setup to keep the driveabilty closer to what you have, unless you plan for future upgrades. Then you may want the complete exhaust.
So I have mine programmed right now with the sctx4 to shift out at 6300 RPM at wide open throttle I can't give you specifics of what it was doing on the actual Dino I didn't ask all that
@@Terminxman I'd go with a 3,000 Stall, it's not too drastic but deffietly an improvement considering how appallingly low the stall speed is on town car units. 1900-2000 rpm :/ on a motor that makes peak torque in the 4k range
@@Terminxman a higher stall converter will not ruin driveability as you don't go stupid with high rpm stall speed and you retain the lock up feature of the converter. I run a 2600 rpm stall converter with 3:55 gears and have no complaints. Car is much faster out of the hole and I can still cruise the highway and retain 24 or higher mpg on highway. One caveat is you will need to add additional cooler to the transmission line.
That 4.6 would sound a little Deeper tone if the X pipe was changed to a H pipe in the Exhaust, i know the X pipe is supposed have better Flow, But to see a difference you'd have to run a Big Block under some Big Boost. My 5.7 Hemi was X Pipe with 2 Glass Packs (Cherry Bombs) and 3 Inch Chrome Long Bologna Style Tips, it had so much "Drone" sound at 2k RPM, Changed it to "H Pipe" and now it sounds like a Deep Toned Truck people keep asking me why it sounds Deep Like a Truck
I told you that speed limiter would be an issue during tuning, and removed. It would be easier to Dyno if they changed the shift points, so they can lock it into a gear over a set speed, it won't downshift. Mine won't go into 2nd over 60, locks in OD over ~85. Did they deactivate the rear O2 as well?
They just did their thing I don't know what they ended up getting the speed limiter out of it and they ended up unlocking the torque converter with a special tune so they could go in and actually see what's going on and this is what we ended up with
SCT is good stuff, I forget the model I had, but it came with their OBD-II scanner that would allow me to upload a tune or put it back to factory. I don't remember if I paid extra or if the one I got had the individual software for me to make my own tuning changes. I could change the air intake & MAF, injectors, trans shift points, lots of stuff if I wanted. It was nice to do simple stuff and not have to pay for another visit to the tuner. My(our) vehicles aren't going onto their website to get attention and more customers, they like the LS and Coyote vehicles with big dyno numbers or drag times for promotional needs. A Ford Bronco and Lincoln Town Car. Does your SCT module have a USB port on the side for a laptop and wideband oxygen sensor?
@@FordBossMe it's really hard to Dyno a vehicle that won't stay in the 1:1 transmission gear. Manuals are best, old slush boxes need their special 2-1-2 gear selector move (or whatever it takes) to make the valve body stay in the preferred gear. You should drop the trans, and do your own valve body and spring refresh. I'm sure you can handle that in 20 minutes, I spent 2 hours because I was afraid of moving a check ball or losing it. 😁🤯
See this is where it’s at. Sleepers. Sure people have Vettes, Mustangs, Camaros, Lamborghini’s Ferrari’s, Mclaren, etc. but when you have a “Grandpa/Grandma” car that can accelerate just as quick as them? PRICELESS. Plus you can sit at a light in full comfort and when a “insert car here” you don’t really have to race them or be sneaky. I’d throw a Kenne Bell supercharger and make it a Grandma Terminator and start taking on Porsche’s and more!
Shit you live close to me I need a shop to bring my sons car I sent you a message but I know with all the weirdo's you don't answer but if you would I would appreciate it.
Seems like an odd choice but then I just found out that people build up the 4.2L I6 found in the Trailblazer to drag them. I guess you find power in weird places....
I never did the gentleman said it wouldn't be worth it at the time you'd only get like 15 to 20 extra horsepower so I figured I'd spend my money elsewhere modifying the vehicle even more
It's called a Marty tune and it's from Mo's Speed Shop He's the number one guy for making tunes for these cars Tell Him Rich - Ford Boss Sent You g.co/kgs/wyv3cP
I predicted 203. You're right on par. Only way to really put some ass in the 2V without a blower or Nitrous is heads/ cam . E85 is a game changer. You'd have to get someone like Darrel Wyngard, John Lund or Rob Shoemaker to tune you at that point. That shit canned tune won't throw hardly any timing in the car for e85 and interested to see if there's any thrown in it with the 93. I'd go supercharger all day long. That engine can hold 450 rwhp.
Had an 03v CVPI It wasn't fast but it was still fast enough to be fun. I did a few small mods. But nothing like long tubes or a real intake. Mine didn't have a top end that I ever found, I backed out at 135 as my tires were not rated for it. There are a bunch of guys in Illinois who know these inside and out. Check out the people at Crownvic dot net. They are a good bunch of guys and cover panther platform Lincolns also.
Yes xe262ca This is just a UA-cam series progression built so we're going to see what we can get into and there's no rule there's no direct path right now we're just going
@@FordBossMe on my 2000 Police Interceptor I've got my hands on a Holley Dominator a nice Powerglide coupled to an electric overdrive and the icing on the cake was 2 OEM Garrett turbos at 9 psi each running on pump gas.. the result was 275 magic poneys and 348 torque at 5100rpm..
@@eddienazareth667 on a 2v with stock heads and especially stock exhaust manifold cam swap is not going to make very much power you going to be severely disappointed
@@neilbrown82 in my case I ported first then went to cherrybomb catbacks plus arp on everything after changing all bearings and a little stop at a local machine shop..
I’m pretty sure all you’re doing is messing with the timing curve because higher octane doesn’t give you more horsepower it just lets you run safer with more timing without pinging
@@FordBossMe best ford 2nd best car* the ls400 pre vvt can take unfathomable abuse that cant be taken by any other vehicle on this earth. 4.6 sounds better though
I want it but then after looking at the price and comparing to what they're actually paying for it which is only about 60% I'm not sure if I'm going to go that route
Nonsense about a disappointing 2 valve. The low hp is from the lack of bs making it unreliable. I wouldn't worry too much about power she's a cruiser anyway. I'm surprised ford even put v8's as standard in their panther platforms and not the Essex v6 as standard then go to an optional v8.
I meant disappointing in the effort of not seeing bigger numbers for you guys I absolutely love the car though I don't care if it's low horsepower or not
@@FordBossMe wasn't that bad. The 2v v8's always prioritized torque and your 4.6 isn't far off spec. As long as she looks and rides good, sounds good and isn't a turtle which she ain't I'd be happy.
Nice video. The HP & TQ numbers you got are about what the 4.6L 2V gets. Imagine how much worse they would have been if the hood was closed, like it is when you drive the car? I didn't care for the SCT tune for my '08 P71. The modified transmission pressures, shift points, and overall behavior were way too aggressive. The car would kick out sideways a little under moderate throttle in the rain or snow. In my opinion, Ford had the P71 transmission parameters set correctly, and far better than the civilian parameters. I would like to suggest that if you're running any rear end gear ration higher then 3.55, to get a rear lube modification for the transmission like - www.bcawebstore.com/index.php?l=product_detail&p=10 For the original AOD, Ford came up with an "Improved rear lube" kit that became standard starting in 1988.
That put a big smile on my face seeing a Town Car on a Dyno!!!👍😀
Your not only one............😄😄😄😄😄😄
That V8 sounds Sweet
Will definitely be looking forward to this series a lot. What I will recommend is a shift kit for the tranny if you're looking for firm and not so lazy shifts, instead of bumping line pressure. That's the way I have my mercury set up. My shifts are firm and quick underload because of my adjusted accumulators and plate passageways, but my tune still has fairly stock pressures. I'm able to have great engagement and shift feel without bumping pressures.
Lots of drivetrain loss on that unit Dynos always gave me hurt feelings when I used em! Tq curve is where your power is at.
Good numbers. 2v aren't power houses. We have a 2v that's boosted (ProCharger) 8psi, 42lb Injectors other bolt ons . It made 340hp don't remember tq.
My tc has 770000 Kms going to try sct tune this spring
I feel like the best bet with a car like this would be to swap on mustang heads/manifold before doing any other mods
I had the Livernois tune done to my 1.5L ecoboost and it is putting out 260lb/ft at the wheels on 93 octane! (I am kidding) ;) If I did that there would be a bent piston rod in about 3 seconds :)
How much torque can they handle reliably to the wheel on a stock 1.5
Hot Rod Lincoln. “ my pappy said son your gonna drive me to drinkin if you don’t stop driving that hot rod Lincoln “
Commander Cody I think…
It sounds really nice.
This is great man... A lot of guys don't/won't understand why we would mod something like a town car and "waste money, time or effort"... But thats alright. This is America and they don't have to. 🤘 .
Mercury or Lincoln have potential to be some nasty sleepers. Not only old folk get to drive them 😂
Like a Merc Marurder
@@buckberthod5007 exactly or an old cougar lol
did a dyno on my 07 Tahoe after I put a low lift cam in. Biggest mistake was tires were s rated. once I went to 127 mph I develop 3 big wrinkles not to mention my cats were getting too hot. So after 3 pulls I was done for the day. I only got 300 hp and forgot the torque values. Going to put long tubes on and delete the rear o2 Sensors and go with 93 octane. Eventually I want 450 at the wheel so I will need to install a pro charger to get that.
I got the 87 tune, Gas is Waaaaaay expencive here....If prices ever drop back down I'll switch...I'd love to run E85 and boost though!!!!
my 01 has 4.10 gears in the back I'm still waiting on my 2300 rpm stall converter to come in so when I put my comp cam stage 2 cams in it will be ready to have a full Dyno tune my exhaust is side exit true dual flow master super tens under the front doors and I have fun being a total off set to regular running 32 inch all terrain tires though it is still funny when I fly down the highway people still slow down and pull to the side thinking I'm the troopers that patrol the area
It was fun watching this video. Thanks for letting us ride along with you! Numbers were a bit low but you are finding out how and what it takes to improve them. From an enthusiast standpoint that is what it's all about. I think that Lincoln will have some surprises in store. Enjoy the ride brother!
Love that exhaust sound. Loud and mean when you get on it, but no drone inside while cruising. That's the type of setup I want for my 6.4 Hemi
Look in the paradox mufflers. Depending what you want to do delete the resonator pick a paradox muffler They have some of the best sounding mufflers. Or looking to varex by X-Force and I have quiet or loud on the fly.
@@1997obspsd thanks for the tips
If you're looking for power, id add a turbo on it, port the intake and heads, put a set of headers on it, go with a slightly bigger set of injectors, add a cam, tune it by advancing timing and adding fueling, get the perfect AFR, tune the TCM to optimize the shift points, and run her on 93. Those 4.6s are stout bastards. They're akin to a Chevy 350 in the amount of beating and abuse they can take without giving any problems.
Closed hood dyno should be more accurate..unless they expect people to drive with no hood/hood up everywhere. Cools better than a closed hood obviously.
Driving also has airflow, alot more than these fans. I imagine it evens out somewhat
Buddy of mine just slapped a supercharged LS in his P70...excited to see what it makes at the dyno 👁️👄👁️
In my opinion the limiting factor on the 4.6 2 valve is the valve to piston clearance. I had used the Trick Flow heads that moved the valves to the deeper side for a bigger cam. It was all good until I dropped a valve so that came to an end (took them 1 year to make my heads, nah I'll pass). Next time I'll just use aftermarket pistons...
It sounds excellent 😄
Tyvm
These cars are rated at 239 HP , seems like quite a gap, engine sounds great nevertheless
If it's rated at 239 That means it's right on the money because you got to expect 15 to 20% drivetrain loss and I usually cut the difference unless it's in that truck at 18% and 18% of that would be close to 190 to 195 rwhp.
@@1997obspsd good to know thanks Eric
Don't forget he has like 220,000? miles of use on the engine.... it definitely won't be as tight and powerful, as it was when new.
Me love the tune on my 2014. Got a quality tune from a reputable vendor, especially since I have an automatic Mustang. Generally I leave it on 87 tune and set the shift fitness to stock pressures. Runs around a ok. Upping the line pressure makes bark more but introduces a light low speed driveline clunk, which is annoying.
That's awesome man! I put that instrument cluster in my 08 cvpi programmed my as built data into it with forscan works great
Gen 2 Coyoteswap.
i used to drive Crown Vics as taxi for quite some time. Somewhere around 1.5 million in them. 30 years. Love the way your car sounds. I would enjoy driving it, too. Best riding cab I ever rode or drove. Thanks.
Nice Town Car, I have an '07 in the same color. Does yours have the Flex Fuel option? I can get E85 pretty easily here in Chicagoland. Big octane!
Long live Woodman's!!
@@Nathan_Jay I'm more in the Family Express end of Chicagoland. E85 all over!
Larger throttle body ? K&N filter ?
Crown Vic p71 air tube ?
3.73 gears are a step in the right direction for sure. But on a heavy car like the Town Car you might wanna consider 3.90 gears or even 4.10 gears. These modular motors prefer to rev. You might want to get the Mark VIII torque converter and add a shift kit for firmer shifts.
I love the 373 and with boost i dont want to go any lower honestly
@@FordBossMe oh ok, yeah if you plan a supercharger then yeah you don't want too much gear
I have 4.10 on a NA motor with lots of torque, 3.73 will be just right for boost IMO
Theres alot of little things that improve performance from cold air intakes - throttle bodies - injectors - but not sure if 93 octane will add anything ! It does sound different after that last tune tho !
I have 08 crown vic flex fuel and i run e85 do you think a marty tune is pointless?
So ...the list. What is beyond stock as of now? Gonna ditch the speed limiter? Lol liking the insider view. Keep up the fantastic work brother. We appreciate it Greatly.
Guarantee you 93 tune will make a difference
What did you run for exhaust? Nice clean deep tone and not to loud.
Two and a half inch pipes all the way back from the cats into a Flowmaster x pipe into Roush 5 L coyote axle back exhaust
@@FordBossMe Sweet. I’m looking for that quiet deep tone for my 2010 F150 5.4 FX4 crew. I’ve got a flow master cat back now. To much cab noise.
@@GodBlessedAmerica Check out Magnaflow.
@@bigleague6723 In a cat back Or true duals with X pipe and magnaflow mufflers?
@@GodBlessedAmerica is it a race truck or going to be? Or do you haul alot? If not id probably just look at a catback setup to keep the driveabilty closer to what you have, unless you plan for future upgrades. Then you may want the complete exhaust.
Hell yeah I own a 2006 Lincoln TC
Cool video, so what what rpms does it hit with the speed limiter removed?
So I have mine programmed right now with the sctx4 to shift out at 6300 RPM at wide open throttle
I can't give you specifics of what it was doing on the actual Dino I didn't ask all that
@@FordBossMe oh wow, is that with your afe cold air intake and spacer? Any valve rattling?
Maybe a Tremec 6 speed in this? Or if not a shift kit? 😃
I would much rather see the J Mod done
Would a Marauder be better for you to start with??
Sure it would but this is what I'm starting with it's just a channel car
Lighten the flywheel and add stall converter!
All converters stall, it also has a lockup. If you mean high stall it would ruin driveability
@@Terminxman ... but boosted launches. This is a dedicated drag build right?
The flywheels are already light on these cars. There like a stamp sheet of metal.
@@Terminxman I'd go with a 3,000 Stall, it's not too drastic but deffietly an improvement considering how appallingly low the stall speed is on town car units. 1900-2000 rpm :/ on a motor that makes peak torque in the 4k range
@@Terminxman a higher stall converter will not ruin driveability as you don't go stupid with high rpm stall speed and you retain the lock up feature of the converter. I run a 2600 rpm stall converter with 3:55 gears and have no complaints. Car is much faster out of the hole and I can still cruise the highway and retain 24 or higher mpg on highway. One caveat is you will need to add additional cooler to the transmission line.
Not a lot a HPS but she will run 🏃♂️ forever is the 4.6 3v just as reliable
Not surprising..
My guess for 93 tune is about 20hp.
Don't be sorry , your cars sounds so good , they need to make more cars sound like yours
0 to 60 is more important to me than dyno numbers.
I got a custom tune it wasn't as good as the preload sct tunes
That 4.6 would sound a little Deeper tone if the X pipe was changed to a H pipe in the Exhaust, i know the X pipe is supposed have better Flow, But to see a difference you'd have to run a Big Block under some Big Boost. My 5.7 Hemi was X Pipe with 2 Glass Packs (Cherry Bombs) and 3 Inch Chrome Long Bologna Style Tips, it had so much "Drone" sound at 2k RPM, Changed it to "H Pipe" and now it sounds like a Deep Toned Truck people keep asking me why it sounds Deep Like a Truck
Great videos !!!
I told you that speed limiter would be an issue during tuning, and removed. It would be easier to Dyno if they changed the shift points, so they can lock it into a gear over a set speed, it won't downshift. Mine won't go into 2nd over 60, locks in OD over ~85.
Did they deactivate the rear O2 as well?
They just did their thing I don't know what they ended up getting the speed limiter out of it and they ended up unlocking the torque converter with a special tune so they could go in and actually see what's going on and this is what we ended up with
SCT is good stuff, I forget the model I had, but it came with their OBD-II scanner that would allow me to upload a tune or put it back to factory. I don't remember if I paid extra or if the one I got had the individual software for me to make my own tuning changes. I could change the air intake & MAF, injectors, trans shift points, lots of stuff if I wanted. It was nice to do simple stuff and not have to pay for another visit to the tuner. My(our) vehicles aren't going onto their website to get attention and more customers, they like the LS and Coyote vehicles with big dyno numbers or drag times for promotional needs. A Ford Bronco and Lincoln Town Car. Does your SCT module have a USB port on the side for a laptop and wideband oxygen sensor?
@@FordBossMe it's really hard to Dyno a vehicle that won't stay in the 1:1 transmission gear. Manuals are best, old slush boxes need their special 2-1-2 gear selector move (or whatever it takes) to make the valve body stay in the preferred gear.
You should drop the trans, and do your own valve body and spring refresh. I'm sure you can handle that in 20 minutes, I spent 2 hours because I was afraid of moving a check ball or losing it. 😁🤯
See this is where it’s at. Sleepers. Sure people have Vettes, Mustangs, Camaros, Lamborghini’s Ferrari’s, Mclaren, etc.
but when you have a “Grandpa/Grandma” car that can accelerate just as quick as them? PRICELESS. Plus you can sit at a light in full comfort and when a “insert car here” you don’t really have to race them or be sneaky. I’d throw a Kenne Bell supercharger and make it a Grandma Terminator and start taking on Porsche’s and more!
Shit you live close to me I need a shop to bring my sons car I sent you a message but I know with all the weirdo's you don't answer but if you would I would appreciate it.
Poissorichard.rp@gmail.com
Seems like an odd choice but then I just found out that people build up the 4.2L I6 found in the Trailblazer to drag them. I guess you find power in weird places....
Awesome video. Hey did you happen to go back for a 93 tune? If so what numbers did it put down?
I never did the gentleman said it wouldn't be worth it at the time you'd only get like 15 to 20 extra horsepower so I figured I'd spend my money elsewhere modifying the vehicle even more
I have a 2004 Lincoln town car and for the life of me can’t find a ecu tune anywhere? Can you guys help
It's called a Marty tune and it's from Mo's Speed Shop
He's the number one guy for making tunes for these cars
Tell Him Rich - Ford Boss Sent You
g.co/kgs/wyv3cP
I predicted 203. You're right on par. Only way to really put some ass in the 2V without a blower or Nitrous is heads/ cam . E85 is a game changer. You'd have to get someone like Darrel Wyngard, John Lund or Rob Shoemaker to tune you at that point. That shit canned tune won't throw hardly any timing in the car for e85 and interested to see if there's any thrown in it with the 93. I'd go supercharger all day long. That engine can hold 450 rwhp.
Do you plan on adding boost ?
Oh yes
I was going to ask if that was still in the plans.
Pretty sure I guessed 197!
Had an 03v CVPI It wasn't fast but it was still fast enough to be fun. I did a few small mods. But nothing like long tubes or a real intake. Mine didn't have a top end that I ever found, I backed out at 135 as my tires were not rated for it. There are a bunch of guys in Illinois who know these inside and out. Check out the people at Crownvic dot net. They are a good bunch of guys and cover panther platform Lincolns also.
What’s does the speed limiter top out at?
111 miles per hour
From mechanic to mechanic wouldn't you be better off with a standalone ECU and a custom ground Cam from Comp Cams? Keep up with the vids! Great job 👍
Yes xe262ca
This is just a UA-cam series progression built so we're going to see what we can get into and there's no rule there's no direct path right now we're just going
@@FordBossMe on my 2000 Police Interceptor I've got my hands on a Holley Dominator a nice Powerglide coupled to an electric overdrive and the icing on the cake was 2 OEM Garrett turbos at 9 psi each running on pump gas.. the result was 275 magic poneys and 348 torque at 5100rpm..
@@eddienazareth667 on a 2v with stock heads and especially stock exhaust manifold cam swap is not going to make very much power you going to be severely disappointed
@@neilbrown82 in my case I ported first then went to cherrybomb catbacks plus arp on everything after changing all bearings and a little stop at a local machine shop..
@@eddienazareth667 and what did you gain from this?
You need to quit playing and throw a 150 shot of nitrous and 2 degrees cooler spark plugs. 🤣
I’m pretty sure all you’re doing is messing with the timing curve because higher octane doesn’t give you more horsepower it just lets you run safer with more timing without pinging
Hell yeah Iove dino pulls
Can you imagine being one of the people that disliked this? Must be some miserable people.
Are u going to get a marty tune?
Check out my car! I've got a 98 town car with a 5.4 that I built myself 😁
Link?
How reliable are these? they're nice but I've heard how fords are
Best cars on the road they don't make a better car than this or more reliable car than this
these cars are fantastic. the body will fall apart before the engine or transmission goes. they can take a beating too
They are bulletproof. Why the police used them for years.
@@FordBossMe best ford 2nd best car* the ls400 pre vvt can take unfathomable abuse that cant be taken by any other vehicle on this earth. 4.6 sounds better though
@@koloy999 tell that to my 03 mgm with 47k miles with a failing transmission
You gonna get adtr supercharger kit?
I want it but then after looking at the price and comparing to what they're actually paying for it which is only about 60% I'm not sure if I'm going to go that route
Nonsense about a disappointing 2 valve. The low hp is from the lack of bs making it unreliable. I wouldn't worry too much about power she's a cruiser anyway. I'm surprised ford even put v8's as standard in their panther platforms and not the Essex v6 as standard then go to an optional v8.
I meant disappointing in the effort of not seeing bigger numbers for you guys I absolutely love the car though I don't care if it's low horsepower or not
@@FordBossMe wasn't that bad. The 2v v8's always prioritized torque and your 4.6 isn't far off spec. As long as she looks and rides good, sounds good and isn't a turtle which she ain't I'd be happy.
😎🤙🦅
Nice video. The HP & TQ numbers you got are about what the 4.6L 2V gets. Imagine how much worse they would have been if the hood was closed, like it is when you drive the car? I didn't care for the SCT tune for my '08 P71. The modified transmission pressures, shift points, and overall behavior were way too aggressive. The car would kick out sideways a little under moderate throttle in the rain or snow. In my opinion, Ford had the P71 transmission parameters set correctly, and far better than the civilian parameters. I would like to suggest that if you're running any rear end gear ration higher then 3.55, to get a rear lube modification for the transmission like - www.bcawebstore.com/index.php?l=product_detail&p=10 For the original AOD, Ford came up with an "Improved rear lube" kit that became standard starting in 1988.