@@RealTomw When the gears are shimmed perfectly, but the sector teeth are hitting the piston body, I chamfer the sector teeth so it only contacts the pistons teeth. This is better than lowering the sector gear shimming and potentially compromising the perfect shim job that you once had.
@@Miguelon88888 Very much depends on the build. I have found Krytacs to be some of the most reliable, QC consistent and well performing Hop Ups since they first released. They have been a go-to preference for me over the years, and I would usually only use something different if the Krytac Hop Up didn’t quite fit the bill for a particular build.
@anttechairsoft Sounds good thank you for replying. I have used prowin and they have been very reliable. Recently installed a maxx and has been working great, Rhopped.
Thats some top quality work there! Congratulations 👏
Thank you very much!
Nice work!
Thanks brother!
Is this the same gearbox as the VFC BCM MCMR AEG? Love the work!!
Yes! All VFCs with Avalon gearboxes are practically identical to this one! 👍
@@anttechairsoft thank you!
Why the shaving/polishing on the inner edges of the sector gear? 2:42
@@RealTomw When the gears are shimmed perfectly, but the sector teeth are hitting the piston body, I chamfer the sector teeth so it only contacts the pistons teeth. This is better than lowering the sector gear shimming and potentially compromising the perfect shim job that you once had.
@@anttechairsoft how is that being done?
@@RealTomw carefully rotating the sector gear by hand against a bench grinder/ belt sander at the angle I want the chamfer to be.
What’s the build list?
Rough build list:
- Leviathan
- 13:1 rocket gears
- Lonex delayer chip
- Paragon Armory 22tpa
- Guarder cylinder
- modify cylinder head
- Stock nozzle/ Tappet
- retro arms piston
- Lonex/ ASG POM Piston head
- Guarder 130 spring cut down to 1.45J
- Krytac hop up
- Krytac bucking
- Lambda or PDI 6.01 barrel r-hopped
- Modify Flat nub
@@anttechairsoftWhy Krytac hop up? Isn't a retro arms or Prowin better?
@@Miguelon88888 Very much depends on the build. I have found Krytacs to be some of the most reliable, QC consistent and well performing Hop Ups since they first released. They have been a go-to preference for me over the years, and I would usually only use something different if the Krytac Hop Up didn’t quite fit the bill for a particular build.
@anttechairsoft Sounds good thank you for replying. I have used prowin and they have been very reliable. Recently installed a maxx and has been working great, Rhopped.