Customisation of My XDEEP Stealth 2.0 Tec
Вставка
- Опубліковано 27 лип 2024
- Discover how I customise my XDEEP Stealth 2.0 Tec version so I can be streamlined when I have got Heated Battery, umbilical Torch (Orca Torch D630 v2), and DrySuit inflation bottle!
Join me on this and discover how and where all this extra equipment is kept.
**** Watch Dive Life Hack: 3D Printed Scuba Diving Customisation (Part 1 of 2) 💡 • Dive Life Hack: 3D Pri...
🔔 If you find my content helpful, subscribe for more free Scuba Diving content: / @perezadvent
⚙️ My Full Set of Scuba Diving Equipment - bit.ly/my-scuba-gear
📌Recommended playlists:
Courses
• Unleash the Power of S...
Equipment
• Unleash the Power of S...
Unboxing
• Unboxing TrustFire DF5...
CHAPTERS
00:00 Customisation of My XDEEP Stealth 2.0 Tec
00:54 Inflation System
02:55 Torch Battery
05:18 Heated Battery
08:25 How it Looks - Спорт
what customisations do you have on your harness/BCD? what would you different from me?
Hi, thanks for sharing!
What is the brand of the argon cylinder strap you are using?
mine came as a package and its the BtS Suit Inflation Mounting Straps. Other options that i'm aware would be the DirZone and OMS.
The DirZone you can get in 85mm (bluefindiving.co.uk/products/dirzone-argon-straps-dz-85-mm-diamete) or 110mm (bluefindiving.co.uk/products/dirzone-argon-straps-dz-110-mm-diameter-tank-mounted). If i'm not mistaken, mine is 90mm (i don't have it with me here to measure) but it will all depend on the size of your cylinder
OK, thanks for the info!
Indeed all the straps kits look more or less the same... I was actually interested to see how you've attached it to the harness, as we don't see that on your video, and as the inflation tank looks pretty stable even though the straps are screwed on soft material instead of a hard backplate!
oh i see. it depend on where you put it on the xdeep stealth. from looking towards it, if you look at it, on the left side (where the spine pouch is open), you can just make a hole there and attach the strap (this was my old setup, picture 2993). if you look on the left side, you cannot make a hole the spine is closed on that side. In this case, you need to add a 2inch strap in between the pockets and make the whole on the strap. Also, at the bottom i've got a bungee to keep it togegher, not relying on the top strap. My currently setup is on the left with the strap instead on the right with it attached directly to the spine.
Took few pictures, hope it helps:
perezadventures.co.uk/wp-content/uploads/2024/07/IMG_2990-scaled.jpg
perezadventures.co.uk/wp-content/uploads/2024/07/IMG_2991-scaled.jpg
perezadventures.co.uk/wp-content/uploads/2024/07/IMG_2992-scaled.jpg
perezadventures.co.uk/wp-content/uploads/2024/07/IMG_2993-scaled.jpg
perezadventures.co.uk/wp-content/uploads/2024/07/IMG_2994-scaled.jpg
Thanks for sharing your setup. What bottle size do you use, 1.5 or 1.0 l and do you feel any effect on your lateral trimm?
Regards
its 1L. there is a small of lateral movement when I'm i'm trying to stay stationary, but nothing that a opening the other arm a bit more or adding an extra small weight does not fix. in my case, i just added a backup light to the harness on the other side...also, remember that i have a canister light to counter-balance as well. if you don't have anything to counter balance, you'll probably feel it more.
Where did you get the valve for that bottle? @1:44 thanks
i've got a full package from bluefindiving (bluefindiving.co.uk/products/dirzone-suit-inflation-system-sis001). for the gauge, i got it the button gauge from dirdirect (www.dirdirect.com/products/ist-button-gauge)
Why you don’t invert battery light with battery heating system? More intelligent since you have Orca Lights 🤦🏻🤦🏻🤦🏻
its because the other side does not have space to make a whole for the inflation bottle. i've got some alternatives in mind that i did not yet able to test...