Finishing the gas tank on the 68 Chevy C10
Вставка
- Опубліковано 12 вер 2024
- While the bed is off the truck, we also take advantage of this and work on the trailing arm bushings, and also the rear brakes.
The gas tank is a HUGE upgrade from what was in here already, even though the old gas tank was still very nicely put together (besides the filler).
If haven't seen Part 1 of this endeavor, go watch it here: • 1968 Chevy C10 Gas Tan...
Other videos on our channel:
Changing a 65 Nova Front Suspenion: • 65 Nova front suspensi...
500 HP 72 Camaro street car: • 500 HP 72 Camaro Stree...
Here at ZHP garage, we do it all. Tune in every Monday for a look into our custom builds, arrays of car shows we attend, and multitude of races we participate in. We've over 20 years of experience, and can work on anything from the daily commuter, to a custom fabricated roll cage, to a custom Chevy C10!
For behind the scenes action, more look into our builds, and things not shown in the fully released videos:
Follow us on Instagram:
Cameraman: / rhziggy
Mr. Peabody: / zhp72
ZHP Garage: / zhp_garage
#zhpgarage #chevyc10 #custombuild #mechanic #classiccars #lstheworld
Great info and video. Cutting the fuel line with the grinder was a bit scary. Thought you were going to cut your wrist. 😉
The fuel filter location looks like a future nightmare to access with bed floor on seems better location under the cab,. Just my humble 2 cents after installing the tank in my 68th anniversary short wide.
Can you guys show where all the wiring for that tank went to? I have the same tank but need an ignition source
The sender goes to the fuel gauge and the fuel pump goes to the fuel pump relay.
Drill holes in the bushing and burn it out.
Where did you get the fuel lines/connectors
Fuel line parts came from Summit Racing. Stainless -6 hard line with
Russell fittings.
Did you put Teflon tape on the fittings that go into the tank?
Can you awnser a couple questions for me man I’m having a whole lot of bs trouble installing my tank. So og tank had three lines one was capped and two run through the chassis one runs to the fuel pump on the block other Im not sure😑 Now my new fuel cell has three holes one with the pick up tube which I’m guessing that line goes to the fuel pump then one for the vent and another one for the return? Where those the other return line go or how does it go?
What brand name Gas Tank are you using for this C10?
Boyd Welding, very good quality gas tanks