The bane of any rc kit, e-clips! The smaller the more cursing ensues! I personally have bags of these things as I've launched many into different dimensions of space and time. I've always loved your build videos no matter the amount of editing because when it comes down to it, they inspire and give us confidence to tackle our own. I'm a fan who will always appreciate your content not just because you play with toys but because you're a pretty rad dude!
Love the build so far, the parts themselves are amazingly perfect. Also the innuendos had me chuckling. And yes, most everyone likes that in/out motion. 🤣🤣 Looking forward to the next video.
Great video as always! A tip I have learned over the last 30 years of using e-clips is to push the gear, bearing, ect, against it to put a little pressure on it while you use the pliers.
I love watching your build videos, I know I'll never build something this exquisite, this technical, this expensive so it's great to watch the two of you do it and enjoy the ride with you both.
I very much enjoy the Mr. And Mrs. Build. You guys are great together. I feel like I'm hanging out with you 2 when I watch your videos. Thanks for the hang!
Loving the build series and love how you guys interact with each other, my wife and I interact very similarly and it just makes me laugh and smile. Looking forward to seeing this beast done and being tested.
Instructions have come along way eh. That's a super nice transmission. Good choice on motor. Great video man. You both always do a great job at bringing smiles, and knowledge.
Really enjoying the build series on this. The quality and engineering CAPO is capable of is outstanding. Love the build but also can't wait to see it in action!!! Haha
Muchos Gracias😊. Tomorrow is Andalucia Day here in España, so a great video to wind down, switch off and enjoy tomorrow🎉💚🤍💚 ( the colours of the province, btw)
Yk it’s odd that I remember watching you when I was a kid being fascinated with the hobby and now I’m slowly getting into it more and more and I remember pinky and how you built one for your ol lady and wellone day I was out near my hobby shop and just asked my gf if she wanted a truck and well now I’m looking for purple parts for it I appreciate the memories and for making me love the hobby
Love everything about the videos. Even if you waffle on sometimes. Absolutely love the build. I just wish I could have the opportunity to build one of these myself
“Pass on what you have learned. Strength, mastery, hmm… but weakness, folly, failure, also. Yes, failure, most of all. The greatest teacher, failure is.” ~Yoda in Star Wars The Last Jedi
Greasy ballz and shafts, power systems to drool over and 80's movie references. Nuff said. Luvs it! I really like the CAD/ animated instructions. Are they good or is analog paper better?
Can i ask when you have metal screws going into metal that you don't use blue loctite on your threads. I do and would like to hear your comment in this regards. Thanks Aaron.
I have mentioned it in each video.. I do not use thread lock during a build video in case I make a mistake while building. I always build a dry run first, because I am not only focused on building, but I have conversation, film work and building to execute, and this can lead to mistakes. Thread Lock can lead to problems for me.. so I build without.
The bane of any rc kit, e-clips! The smaller the more cursing ensues! I personally have bags of these things as I've launched many into different dimensions of space and time. I've always loved your build videos no matter the amount of editing because when it comes down to it, they inspire and give us confidence to tackle our own. I'm a fan who will always appreciate your content not just because you play with toys but because you're a pretty rad dude!
Love the build so far, the parts themselves are amazingly perfect. Also the innuendos had me chuckling. And yes, most everyone likes that in/out motion. 🤣🤣 Looking forward to the next video.
Great video as always! A tip I have learned over the last 30 years of using e-clips is to push the gear, bearing, ect, against it to put a little pressure on it while you use the pliers.
Im getting right into this series. It's nice to have you and jem back doing some videos together 🤟
I been looking thinking you'll reach 4 million subscribers. The O.G OF RC
I love watching your build videos, I know I'll never build something this exquisite, this technical, this expensive so it's great to watch the two of you do it and enjoy the ride with you both.
I very much enjoy the Mr. And Mrs. Build. You guys are great together. I feel like I'm hanging out with you 2 when I watch your videos. Thanks for the hang!
I learned years ago that buying e clips in different sizes for RC will help with headaches of building kits. This build is fun to watch finally
19:29 I LOVE how you both explain everything, I'm a newbie so you break it down nicely for me, thanks!
Loving the build series and love how you guys interact with each other, my wife and I interact very similarly and it just makes me laugh and smile. Looking forward to seeing this beast done and being tested.
Sweet n Smoothie!!!!!!!
Instructions have come along way eh.
That's a super nice transmission.
Good choice on motor.
Great video man.
You both always do a great job at bringing smiles, and knowledge.
I love the humor between you two, especially the movie quote very end
It is great watching you both build this truck you are having so much fun
Yall are kicking along.. I ABSOLUTELY LOVE my 2100kv axe kit.. Tons of power all around.. good speed and good torque
Really enjoying the build series on this. The quality and engineering CAPO is capable of is outstanding. Love the build but also can't wait to see it in action!!! Haha
Guys 😂 loving this build this is 😂I just don't have the words to describe what this build series is thanks for bringing us along in ur rc adventure
Thanks for sharing, always nice to see you two having a good time.
More with you and your a better half so cool keep it up ❤❤❤❤❤❤
It's nice to have you back Jim
Love these build videos the comintary is the best 👍👍
That design is wild! You've had that 1s lipo forever!
Sweet Jesus clippp!!!!!!!
Muchos Gracias😊. Tomorrow is Andalucia Day here in España, so a great video to wind down, switch off and enjoy tomorrow🎉💚🤍💚 ( the colours of the province, btw)
Awesome video as always. This things amazing, can't wait to see it run.
Great couch time for me enjoying you 2, doing your thing.
King of the Hammers was bad to the Bone this year! You need to make a trip sometime! Fire In The Hole!!
Yk it’s odd that I remember watching you when I was a kid being fascinated with the hobby and now I’m slowly getting into it more and more and I remember pinky and how you built one for your ol lady and wellone day I was out near my hobby shop and just asked my gf if she wanted a truck and well now I’m looking for purple parts for it I appreciate the memories and for making me love the hobby
Kahlimah!! 🤣🤣🤣🤣🤪🤣🤟❤️ rafwrs of the lost arc! Gem of a series!😉
Very nice video and awesome details this capo 👍💪😜👋
Love everything about the videos. Even if you waffle on sometimes. Absolutely love the build. I just wish I could have the opportunity to build one of these myself
Great video love the teamwork funny banter 😂
Its great watching you two building this together.
Can I just say that was a lot of motion lotion on the input shaft. 😆
Very elaborate directions.. very cool.
So cool medic and gem
So awesome
“Pass on what you have learned. Strength, mastery, hmm… but weakness, folly, failure, also. Yes, failure, most of all. The greatest teacher, failure is.” ~Yoda in Star Wars The Last Jedi
Love you 2
Very cool
Splineless bassturdd!!!!!
18:18 ASMR at its best!
Really cool
You guys make me wanna do another build that I can’t afford….and other things too. 😂😂😂
Holier christ!!!!
👍👍
Yesssss
🔥🔥🔥🔥🔥
Enjoy watching the build. Any chance of adding a bright white light from above. A lot of shadows Again just a random thought.
To remove red or blue thread lock use 275° to 300° to loosen. No more heat is needed than that and it will not damage hardware!
Greasy ballz and shafts, power systems to drool over and 80's movie references. Nuff said. Luvs it! I really like the CAD/ animated instructions. Are they good or is analog paper better?
Gotta grease the balls...... best line ever
Hey,
What's the chances of loading wars coming back?
You may of addressed this, but I don't know for sure.
Miss them so much.
Have you done more of that 5/th scare races itj very fun to wacth
😁👍🏼
U 2 R A Trip
Can i ask when you have metal screws going into metal that you don't use blue loctite on your threads. I do and would like to hear your comment in this regards. Thanks Aaron.
I have mentioned it in each video.. I do not use thread lock during a build video in case I make a mistake while building. I always build a dry run first, because I am not only focused on building, but I have conversation, film work and building to execute, and this can lead to mistakes. Thread Lock can lead to problems for me.. so I build without.
I do want this model when it’s available.
COMEN ALONG well gona looks good
Hopefully nobody has asked this question yet. What kind of Grease are you using?
I think in the first video he explains that
Long hard shaft that needs some grease , I thought that's what she said
How come they don't use a sump in the transmission?
I don't call them E Clips. I call them Jesus clips. Because when you don't get them to engage and they leave the chat, I usually yell JESUS!
Marine Grease
Hey Rc sparks I’m needing some help building a custom 4x4 I have frame tires but not transmission needing ideas for the drive axles
The mall is unavailable, so how can we be building along with you?
Can’t buy this shit at the mall
All my wife wants to do is eat cheetos and watch TV. I can't sit still that long.
😂😂😂❤
Don't come at me with less than belted raptor tires.
I did notice you can’t read Maderin
Fourth
I don't submerge my rc he says lol
✊🏽😆
Indiana Jones
have you thought of doing an updated water proofing vid