I like the fact that in a trashy park I won't dig up bottle caps , because of the caps position in the graph, the 800 or 600 you will get them . I have all three. I just love the target ID and Target trace.
I have been using the CTX since 2012 and I also purchased a Nox 800. The CTX may be heavier but it does not feel that way, it is very well weighted. I can swing it all day and I'm 63. After using both, the CTX is a Cadillac, the Nox a Honda CRV. Both excellent build quality, CTX just feels better quality etc, I guess the price difference. Finds, love Target Trace on the CTX.
The CTX and or the ETRAC are the next machines that will be upgraded with newer models I’ve used them all and own them all but my go to machine in trashy parks is the CTX with my NOX as a back up
Toggling between patterns is super easy when you set up the user button for it. Actually gives you 4 different patterns to toggle between quickly because each pattern has two discrim patterns
Kelly did well loaning that equipment to you to try and I'm glad you have Phil for back up. Learning complexities is difficult (for me, sewing especially) and I would go cross eyed trying to read all that. So, you are patient, a great teacher, and you're not going to give up easily. Great qualities for a hands on trainer, imo.
Just a note on minelab customer service. Bought my ctx about 3 years ago and it went on the fritz. Mailed it off and minelab replaced the control box, the lcd screen and the housing. Basically new detector. Shipped back in 4 days.......no charge. Amazing
Awesome video sir!! Much better than a recent review I seen one of the talking heads try to do with a snooty attitude. I love your methods of communication and your "teachable moments " lessons. Keep swinging and stay safe bro.
Assuming you are pressing the GB and NC by accident You can cancel them by pressing the pin point, and different coils bring different depths, change the pin point to sizing turn recovery fast off and tick recovery deep, you can build your own discrimination patterns either on a computer or through the machine itself, tadpole and ghost are good patterns, I use combined tones with ground coin target separation
I consistently make more finds with my CTX vs my Nox 800. Don't get me wrong. It's a pleasure to swing. Especially the weight relief compared to my CTX. At the end of the day though, it all comes down to finds, and for ME the CTX outperforms the Nox. Won't part with either one though. Just as I won't part with my Excal 2 -- another beast of a metal detector from the folks at Minelab.
Metal Detecting is a lot like climbing a ladder , step one..a Bounty Hunter, step two a Garret, then a 800 Nox ...then a CTX 3030! Sorry I can't afford that last step! You do it Merrill and show us the view from up there! All the best Harry
Don’t feel bad for not affording the last step cause not only will the machine cost you $2000 the shoulder surgery after swinging that boat for a year will cost a hell of a lot more.
If its good Merrill I'm on board with your comments on the Ctx 3030.. We need a little more feed back from you on test especially in prospect park . Targets that has been missed depth and separation .. Enjoy the machine buddy!! 👍
Ctx3030 deepest settings, manual sensitivity 25÷, noise cancel 1, dont ground balance, never use auto or you won't get over 6 inches, regards the South Wales Detectorist
I'm in Alaska. How would you rate the comparisons between the 800, 3030, and 4500? Or do you prefer something else in the field of versatile detectors? Manly for gold and other stuff. I would like to start with a good one and master it. I like this because of the info it SHOWS you!! I will have the coil in water.
@@rightpassage I would watch the series Ausi Gold Hunters and check out the detectors they use for gold, I think the 4500 is the deepest but you don't have the discrimination choices the CTX has,
Good video. Yea you definitely have to get more time in with it. It reminds me of my Explorer 2. With that machine I always run it in manual sensitivity and keep it just below the chatter and thats it. Always remember too, these machines you have to go slow and low. Ive found lots of deep coins that way. Ive just recently started playing with the custom patterns. Keep at it, hope my experience helps.
ime seriously contemplating one of these in 2024, i like the totally customisable set up & the build quality looks nicer than these light waight generic looking things that all look the same now.
Since 2012 Merrill. I wish I lived closer buddy, I could help you out.😀 It really is INCREDIBLE in the world of coin hunting, I’m glad you’re honest that you have no clue right now. IF you have questions about operation, settings, WHY to do something, WHY you want to set this that way or not....ASK.
People are making videos about finding coins. I would like to know how good it detects GOLD as well for that price? Which mode to select? I live in Alaska. Any recommendations anyone?
Hahaha.. Fun to watch, LOL... I've been using the CTX-3030 since 2015. Yes it is heavy... That's why I use the Minelab Pro-Swing 45 Harness, that's highly recommended when swinging the CTX-3030 or you're going to wear yourself out big time. Anytime you want to talk more about the CTX-3030 just send me an email.
Hehe, this was a fun watch! You fumbling around in the menus was a blast ;) I think I read the Nox800 manual 3 or 4 times before I even ordered it. Guess we're different in that aspect! :p I'm nerdier than you Merrill! If you dress up as Gary Drayton and sneak on to Oak Island, I'm sure you could meet your silver goals for a few decades ;)
Huge learning curve yes but I’m pulling from the manual in this video so I am definitely reading it. I’m very tuned into the way that I learn after struggling with reading for most of my life. Some people can absorb books and immediately apply the knowledge. I can’t. I need to tour things first and then hit the books. The learning curve also speeds up when you get the right people involved. Experts who has use the machine and can communicate what they know. A process is only sustainable if it is efficient.
@@MetalDetectingNYC Best thing to do is sit down with the manual printed out, and the detector in the yard, start at page one and read, and go through and practice each setting by reading what to do then do it on the detector. And do it twice, and play around. The go to the next area in the manual.
I've always had an issue with going deep with the CTX-3030... I never really know if I'm getting max depth out of that machine. I always feel like something isn't right with getting that machine to go deep.
I have a ctx and and an equinox I give the edge to the knox for deep indians and weight but the ctx is worth the extra weight and if I find more silver with the ctx I can live with a few less indians the ctx 3030 is a superior superior machine hands down
No doubt, it’s not hard to figure out though, took me about a month to be familiar with every adjustment, then it is a matter of figuring out what to adjust 😁
The CTX3030 is king especially if you know what you are doing with it. If you don't or can't afford the CTX stick with the equinox. That a good little machine for the price. Please don't say its better though because its not I have had both. And the CTX has held its cost for a reason people know what its capable of. Happy Hunting people
Wow this is the best indepth review of the ctx ever ! Got me subbed . I 've got an eqyinox 800 , but hunted the cr#p out of it (3000h) mostly salto wet beach . Found so much with it , juwelery its almost a scandal..lol But i think equinox is one of the worst mechanicaly detector ever .. And mine , had waterdamage twice ! Broken the armcuff...twice the coilsupport bracket , shaft..., and now the on/off button is broken on the inside of the unit 🤪. -So i am a bit scepticus to buy me an CTX in 2021. But i am so gold addict, that i have to buy a other excellent beach machine or i go bonkus...lol
Согласен,для меня Минелаб умер после 3030,даже если и выйдет новая клюшка ему на замену,то стоить будет за 200 тыр,дороговато.То что сейчас выпускают Ванквиши и Эквиноксы это не приборы.
I'm certain you are more experienced than I sir. With all due respect, your passes should not zig zag, they should more overlap. I know also know you're just testing the machine.
Trying to push the detector's performance to high levels on the first day, in a trashy field, and without even reading the manual, definitely isn't the right way to learn something. You will get annoyed. Study the manual, go to a clean field, start with lower sensitivity and higher discrimination settings... do that many times. That's the way. 👍
The CTX is still king of the hobby detecting world, but others are catching up. So much so that it's getting harder and harder to justify the $2,499 price tag of a CTX when there are some really, REALLY good detectors out there now for half the price and that perform almost as well, if not as well, as the CTX.
Go in the groove and turn it twist it Go in the groove and turn it twist it ... not sure if that's the start of a new Merrill rap song or dirty instructions for a great saturday night.
Merci sous titre français 👍 je vais l'acheter d'occasion 880 euro j'espère serait pas dessus merci pour la vidéo j'attends video l'expérience de ton collègue expert👍
No offense but you got to work on those plugs. Leaving loads of dirt around your holes and not taking time to really repair plugs is bad for this hobby. Other than that love your videos. But dig a 3 sided plug leave one side attached makes life so much easier.
Agree wholeheartedly. Also, carrying a long handled shovel around in public parks is also putting our hobby at risk of being banned in public areas. It's the perception, even though it may be possible to do less damage using it.
@@thedigger1865 yea I agree it does look bad. But I just can’t dig with a hand digger all day especially with psoriatic arthritis. And I can do such a better plug with a large shovel. But I totally get what your saying people see a big shovel and assume big damage.
@@thedigger1865 I agree. However, hand diggers aren't feasible in my area due to the hardness of the soil. Clay and 100° days don't mix, yet that's what we deal with down here.
If I bought this in 2014 I'd still be trying to learn it and be equally frustrated....I'm sure the 3030 is made for only a few detectorists with technological memory and a quick learning curve....600 and 800 are less expensive and would be a better choice for any detectorist.....
Nice machine but it’s expensive, heavy and broad banded so prone to a little more emi. It also looses a little depth in multi freq mode. Multi freq machines do better on some jobs and not as good as a single freq on others.
You can't learn it by giving it to someone else.i live in oz the soil here is red with iron it can pick dime size coins up at 10inches easy just use coin program sens at 27 don't go 50 tones it will confuse you go 4 tones you only got 90%silver coins they will I'd 41 and above 50%coins are harder as they I'd near pulltabs most accurate I'd of any machine all ways have high trash on its recovery speed is not as fast as the nox
No, you haven’t owned 2. If you have you didn’t use them or you didn’t know how to use them or you wouldn’t be saying what you’re saying. These are common tropes from those who don’t understand what the CTX-3030 was built for and just regurgitate forum misnomers to make themselves feel better. The chipsets for maximum performance in any category have existed for decades. It’s now about how these machines are coded with complex processing algorithms. The CTX is coded to provide the most information possible on any one target. It has not been surpassed in that ability. The equinox was built for those who want to hack about wildly among the trash. Machines that can separate are nothing new and are also old technology.
@@Mr.Technical77 Lol. "Tropes!!? Sorry your feelings are hurt for your overpriced machine. Actually, you are right! I technically owned 3. My wife owned the other. CTX; The outdated clunky "law of diminishing returns" detector! I know what I saw first hand testing them in my test garden so I have no desire to debate. It was soundly beaten by an Equinox and a Deus. Check out Calabash's channel to see with your own eyes! ua-cam.com/channels/7k3CHcQZs5Z1VfKkqYRmmA.html Hope you feel better!
@@Mr.Technical77 i owned 2 3030’s from 2014-2020 sold em both for the nox 800 whether you like it or not the 800 is better, you can EASILY go on UA-cam and find video after video after video of experienced users smoking 3030’s with nox 800’s not being mean but you sound salty cuz you paid $1,500 extra bucks for inferior tech…feels bad..sell it get nox 800 “learn” how to use it…you will be much happier 😜😜
facebook.com/metaldetectingnyc
instagram.com/metaldetectingnyc
I like the fact that in a trashy park I won't dig up bottle caps , because of the caps position in the graph, the 800 or 600 you will get them . I have all three. I just love the target ID and Target trace.
The Rutus alter 71 paired with the concentric coil recognizes beer and bottle caps as well. But, we better dig them all in order not to miss a thing.
I have been using the CTX since 2012 and I also purchased a Nox 800. The CTX may be heavier but it does not feel that way, it is very well weighted. I can swing it all day and I'm 63. After using both, the CTX is a Cadillac, the Nox a Honda CRV.
Both excellent build quality, CTX just feels better quality etc, I guess the price difference. Finds, love Target Trace on the CTX.
well my Nox 800 leaked, so not so sure about quality build. The shaft also wobbled a little bit.
My CTX-3030 is down in Florida at my buddies house... you're making me want it back up here with me in NJ now, LOL!
The CTX and or the ETRAC are the next machines that will be upgraded with newer models I’ve used them all and own them all but my go to machine in trashy parks is the CTX with my NOX as a back up
I thought that too r years ago but I couldn't wait any longer to have the best. So I'll just buy another when they upgrade
Toggling between patterns is super easy when you set up the user button for it. Actually gives you 4 different patterns to toggle between quickly because each pattern has two discrim patterns
Kelly did well loaning that equipment to you to try and I'm glad you have Phil for back up. Learning complexities is difficult (for me, sewing especially) and I would go cross eyed trying to read all that. So, you are patient, a great teacher, and you're not going to give up easily. Great qualities for a hands on trainer, imo.
Thank you Carol!
Looking forward to the sequel! Your humility and humor make a great combination for the viewer. Keep it up. and Thanks .
Just a note on minelab customer service. Bought my ctx about 3 years ago and it went on the fritz. Mailed it off and minelab replaced the control box, the lcd screen and the housing. Basically new detector. Shipped back in 4 days.......no charge. Amazing
That last thing you found at 43.39 if you noticed it was also threaded on the inside..
Awesome video sir!! Much better than a recent review I seen one of the talking heads try to do with a snooty attitude. I love your methods of communication and your "teachable moments " lessons. Keep swinging and stay safe bro.
Thank you Jay
that "cup" at 43:20 ... is definitely a 1912 to 1916 Ford Model T hubcap (or a reproduction of one). Cool!
great review as always. this will be a superior detector when mastered.
Assuming you are pressing the GB and NC by accident You can cancel them by pressing the pin point, and different coils bring different depths, change the pin point to sizing turn recovery fast off and tick recovery deep, you can build your own discrimination patterns either on a computer or through the machine itself, tadpole and ghost are good patterns, I use combined tones with ground coin target separation
You are hilarious, I’m 4 minutes in, and I have smiled a few times already!
I consistently make more finds with my CTX vs my Nox 800. Don't get me wrong. It's a pleasure to swing. Especially the weight relief compared to my CTX. At the end of the day though, it all comes down to finds, and for ME the CTX outperforms the Nox. Won't part with either one though. Just as I won't part with my Excal 2 -- another beast of a metal detector from the folks at Minelab.
Metal Detecting is a lot like climbing a ladder , step one..a Bounty Hunter, step two a Garret, then a 800 Nox ...then a CTX 3030! Sorry I can't afford that last step! You do it Merrill and show us the view from up there! All the best Harry
Don’t feel bad for not affording the last step cause not only will the machine cost you $2000 the shoulder surgery after swinging that boat for a year will cost a hell of a lot more.
If its good Merrill I'm on board with your comments on the Ctx 3030.. We need a little more feed back from you on test especially in prospect park . Targets that has been missed depth and separation .. Enjoy the machine buddy!! 👍
Merrill is being very very quiet today,,,,,,, I think he is busy reading and absorbing the encyclopedia of a manual!!! Good Luck Merrill!
Oh forgot to say, I will never get rid the CTX. The versatility is great. Just wished coiltek made a round 15 inch coil for it. 🤨
Ctx3030 deepest settings, manual sensitivity 25÷, noise cancel 1, dont ground balance, never use auto or you won't get over 6 inches, regards the South Wales Detectorist
I'm in Alaska. How would you rate the comparisons between the 800, 3030, and 4500? Or do you prefer something else in the field of versatile detectors? Manly for gold and other stuff. I would like to start with a good one and master it. I like this because of the info it SHOWS you!! I will have the coil in water.
@@rightpassage I would watch the series Ausi Gold Hunters and check out the detectors they use for gold, I think the 4500 is the deepest but you don't have the discrimination choices the CTX has,
If you’re gonna run all metal, make the tone id for iron signals a grunt
Good video. Yea you definitely have to get more time in with it. It reminds me of my Explorer 2. With that machine I always run it in manual sensitivity and keep it just below the chatter and thats it. Always remember too, these machines you have to go slow and low. Ive found lots of deep coins that way. Ive just recently started playing with the custom patterns. Keep at it, hope my experience helps.
It’s a learning curve bud, you can’t expect to knock it out of the park day 1.
ime seriously contemplating one of these in 2024, i like the totally customisable set up & the build quality looks nicer than these light waight generic looking things that all look the same now.
Since 2012 Merrill. I wish I lived closer buddy, I could help you out.😀 It really is INCREDIBLE in the world of coin hunting, I’m glad you’re honest that you have no clue right now. IF you have questions about operation, settings, WHY to do something, WHY you want to set this that way or not....ASK.
I always outhunt my friend that has a CTX 3030 with my V3i.
This is going to be good, if you really give this thing the proper effort to learn it. You will see the power of it
People are making videos about finding coins. I would like to know how good it detects GOLD as well for that price? Which mode to select? I live in Alaska. Any recommendations anyone?
That was a Ford Model T hubcap. I found one b4.
Hahaha.. Fun to watch, LOL... I've been using the CTX-3030 since 2015. Yes it is heavy... That's why I use the Minelab Pro-Swing 45 Harness, that's highly recommended when swinging the CTX-3030 or you're going to wear yourself out big time. Anytime you want to talk more about the CTX-3030 just send me an email.
Hehe, this was a fun watch! You fumbling around in the menus was a blast ;) I think I read the Nox800 manual 3 or 4 times before I even ordered it. Guess we're different in that aspect! :p I'm nerdier than you Merrill! If you dress up as Gary Drayton and sneak on to Oak Island, I'm sure you could meet your silver goals for a few decades ;)
This is going to be a huge learning curve, as Merrill never reads the manual, and the CTX is no easy machine.
Huge learning curve yes but I’m pulling from the manual in this video so I am definitely reading it. I’m very tuned into the way that I learn after struggling with reading for most of my life. Some people can absorb books and immediately apply the knowledge. I can’t. I need to tour things first and then hit the books. The learning curve also speeds up when you get the right people involved. Experts who has use the machine and can communicate what they know. A process is only sustainable if it is efficient.
@@MetalDetectingNYC Best thing to do is sit down with the manual printed out, and the detector in the yard, start at page one and read, and go through and practice each setting by reading what to do then do it on the detector. And do it twice, and play around. The go to the next area in the manual.
I'll stick with the 800.
I have both and you can't go wrong with a knox I think the ctx is better but not 1500.00 dollars Superior
@@bsteen5691 who care about the price ,it found me a Roman hoard that paid out £110k
Nice Video.
Looking at getting one of these, interested in the GPS features, you haven't commented much on these capabilities...
I've always had an issue with going deep with the CTX-3030... I never really know if I'm getting max depth out of that machine. I always feel like something isn't right with getting that machine to go deep.
From time to time use a etrac it’s a lot to learn but do like two groups of numbers makes it interesting
I have a ctx and and an equinox I give the edge to the knox for deep indians and weight but the ctx is worth the extra weight and if I find more silver with the ctx I can live with a few less indians the ctx 3030 is a superior superior machine hands down
Good video! Better watch rolling through those stop signs!
We can’t skip the manual on this one
No doubt, it’s not hard to figure out though, took me about a month to be familiar with every adjustment, then it is a matter of figuring out what to adjust 😁
U better read it a FEW times!!!! Lol😂😜
The CTX3030 is king especially if you know what you are doing with it. If you don't or can't afford the CTX stick with the equinox. That a good little machine for the price. Please don't say its better though because its not I have had both. And the CTX has held its cost for a reason people know what its capable of.
Happy Hunting people
Thanks for the info right up front. The Ford part might be an axle cap (sorta like a hubcap) used to protect the bearings from grit.
Jeff is one smart fella.
Professor you ate a stop sign !
lol "i wanna do a good job...." as he runs a stop sign hehe
Still love the 800 Merr
Thank you for posting this video. No way in hell do I want the CTX 3030, it is way too much for my feeble brain to wrap around
If never used a ctx but I have the nox and I would think the nox has newer tech in it.
So how did you unlock the depth
I’m very early in the process with this detector. The depth came when I opened up what was notched out and took it off auto sensitivity
Red octagon?
Wow this is the best indepth review of the ctx ever !
Got me subbed .
I 've got an eqyinox 800 , but hunted the cr#p out of it (3000h) mostly salto wet beach .
Found so much with it , juwelery its almost a scandal..lol
But i think equinox is one of the worst mechanicaly detector ever ..
And mine , had waterdamage twice !
Broken the armcuff...twice the coilsupport bracket , shaft..., and now the on/off button is broken on the inside of the unit 🤪.
-So i am a bit scepticus to buy me an CTX in 2021.
But i am so gold addict, that i have to buy a other excellent beach machine or i go bonkus...lol
Thank you!
Good luck with that thing!!!! I would have no shot of figuring that out!!!😜😂😜😂
The CTX is the best only it's not for people that don't want to learn something.
Reminds me of v3i when I first got playing with controls all day instead of hunting equinox 800 easy-going machine
11.43- 12.43 usually a dime every time!
Do you ever do any door knocking? I think it would be cool!
Just imagine all that could be unlocked! Cheesecake, Taco Bell, even Olive Garden and beyond
Nice CTX 3030 merril ! Thats what Gary drayton users on the curse of oak island 🏝🪙🏴☠️
Nice machine but on oak island honestly Gary never finds nothing lol
СТХ можно еще разогнать по глубине новыми обновлениями,но к сожалению Минелаб их делал последний раз,когда еще были живы динозавры!)
Можно и е трак обновить, да не выгодно..
Согласен,для меня Минелаб умер после 3030,даже если и выйдет новая клюшка ему на замену,то стоить будет за 200 тыр,дороговато.То что сейчас выпускают Ванквиши и Эквиноксы это не приборы.
Directions...We don't need no stinking Directions :)
merel you are fantastic!!! thank you for your research!!!
Sensitivity: Auto plus 3
FYI it was a Ford Model T hubcap.
That is incredible!!!!
I wish you luck. I’m still learning the 800, but to be fair I want to dig the trash.
I'm certain you are more experienced than I sir. With all due respect, your passes should not zig zag, they should more overlap. I know also know you're just testing the machine.
6" coil
Auto +3
2 tones
That's all folks 🐰
"really mastered the e-trac" - it hurts!
Trying to push the detector's performance to high levels on the first day, in a trashy field, and without even reading the manual, definitely isn't the right way to learn something. You will get annoyed. Study the manual, go to a clean field, start with lower sensitivity and higher discrimination settings... do that many times. That's the way. 👍
Omg the ctx 3030.
Joey from friends is handy.
43:04. Ford hubcap
The CTX is still king of the hobby detecting world, but others are catching up. So much so that it's getting harder and harder to justify the $2,499 price tag of a CTX when there are some really, REALLY good detectors out there now for half the price and that perform almost as well, if not as well, as the CTX.
Merrill awesome always 👍 set it to 50 tones 👍 🍺And clean ya trunk out 😅🤣also they bringing out a new ctx3030
Go in the groove and turn it twist it
Go in the groove and turn it twist it
... not sure if that's the start of a new Merrill rap song or dirty instructions for a great saturday night.
Silver: 09:46 or 13:46 may be also 12:46
Minelab CTX 3030 Metal Detector 17" Smart Coil, 11" DD Smart Coil for $2900 it better dig the target for me !!!!
There are better options in my opinion. www.iratemetaldetectors.com/
@@MetalDetectingNYC is it possible to compare the Legend with the ctx? 😱
Merci sous titre français 👍 je vais l'acheter d'occasion 880 euro j'espère serait pas dessus merci pour la vidéo j'attends video l'expérience de ton collègue expert👍
No offense but you got to work on those plugs. Leaving loads of dirt around your holes and not taking time to really repair plugs is bad for this hobby. Other than that love your videos. But dig a 3 sided plug leave one side attached makes life so much easier.
Agree wholeheartedly. Also, carrying a long handled shovel around in public parks is also putting our hobby at risk of being banned in public areas. It's the perception, even though it may be possible to do less damage using it.
@@thedigger1865 yea I agree it does look bad. But I just can’t dig with a hand digger all day especially with psoriatic arthritis. And I can do such a better plug with a large shovel. But I totally get what your saying people see a big shovel and assume big damage.
@@thedigger1865 I agree. However, hand diggers aren't feasible in my area due to the hardness of the soil. Clay and 100° days don't mix, yet that's what we deal with down here.
I brought from Kellyco
U ran a stop sign……your definitely from NY! Lol
You're cool.
How many people does it take to assemble a CTX3030? You guys look real bad and it’s so easy to assemble. Wow!
11.45 - 12.45 or 11.46 - 12.46 ---> It's A Quarter! Usually.
For the price I say it should be the old time CTX users still say it is but the younger people are saying the 800 is better let's hear what you think
Merrell go out the digging Duo the father and daughter team they hunt with jackpot a lot he uses CTX
I have been in contact with him
Good😁
What is it with you and stop signs....lol...I don’t want to see you get a ticket or worse have someone slam into you...we need you in one piece.
If I bought this in 2014 I'd still be trying to learn it and be equally frustrated....I'm sure the 3030 is made for only a few detectorists with technological memory and a quick learning curve....600 and 800 are less expensive and would be a better choice for any detectorist.....
Nice machine but it’s expensive, heavy and broad banded so prone to a little more emi. It also looses a little depth in multi freq mode. Multi freq machines do better on some jobs and not as good as a single freq on others.
At least their is a good counter weight then a battery of a etrac
20:13 🤣🤣🤣🤣
Way to complicated🤓🤓🤓🤓🤓
You can't learn it by giving it to someone else.i live in oz the soil here is red with iron it can pick dime size coins up at 10inches easy just use coin program sens at 27 don't go 50 tones it will confuse you go 4 tones you only got 90%silver coins they will I'd 41 and above 50%coins are harder as they I'd near pulltabs most accurate I'd of any machine all ways have high trash on its recovery speed is not as fast as the nox
I wish I didn't see this video. Cause anything the author says after this video about 3030 will be not reliable.
RTFM😂😂😂
Quit watching after 5 minutes. Painful to watch
There’s meds for that!
No user error. Over hyped, overrated, and old technology. Clunky and slow to boot..
@Loco Raindrops 1000's. I owned 2.
@Loco Raindrops "Doth protest too much?"
No, you haven’t owned 2. If you have you didn’t use them or you didn’t know how to use them or you wouldn’t be saying what you’re saying. These are common tropes from those who don’t understand what the CTX-3030 was built for and just regurgitate forum misnomers to make themselves feel better. The chipsets for maximum performance in any category have existed for decades. It’s now about how these machines are coded with complex processing algorithms. The CTX is coded to provide the most information possible on any one target. It has not been surpassed in that ability. The equinox was built for those who want to hack about wildly among the trash. Machines that can separate are nothing new and are also old technology.
@@Mr.Technical77 Lol. "Tropes!!? Sorry your feelings are hurt for your overpriced machine. Actually, you are right! I technically owned 3. My wife owned the other. CTX; The outdated clunky "law of diminishing returns" detector! I know what I saw first hand testing them in my test garden so I have no desire to debate. It was soundly beaten by an Equinox and a Deus. Check out Calabash's channel to see with your own eyes! ua-cam.com/channels/7k3CHcQZs5Z1VfKkqYRmmA.html
Hope you feel better!
@@Mr.Technical77 i owned 2 3030’s from 2014-2020 sold em both for the nox 800 whether you like it or not the 800 is better, you can EASILY go on UA-cam and find video after video after video of experienced users smoking 3030’s with nox 800’s not being mean but you sound salty cuz you paid $1,500 extra bucks for inferior tech…feels bad..sell it get nox 800 “learn” how to use it…you will be much happier 😜😜