Im Getting 285s All Terrain On My Stock Suspension!

Поділитися
Вставка
  • Опубліковано 20 сер 2024
  • Hello and welcome to yet another video !
    In this video Im on a quest to get new bigger better tires for my truck ! and as always for some reason nothing goes as planed lol
    All gear used to to make this video
    DJI OSMO Action = amzn.to/3v21Mnb
    SanDisk 128GB Extreme microSDXC = amzn.to/3v4dEF9
    PGYTECH Camera Cage = amzn.to/3ehjRXJ
    Saramonic SR-XM1 3.5mm = amzn.to/3gmyvzm
    Dual USB-C 3.5mm Mic Adapter = amzn.to/2QERrOY
    Neewer 50-In-1 Action Camera Accessory Kit = amzn.to/3tI5ySg
    Neewer Battery Charger Set = amzn.to/3glcuRv
    Thank you very much for watching !

КОМЕНТАРІ • 39

  • @kdm704
    @kdm704 3 роки тому +12

    Looks good! While you wait for a lift, if you take the side steps off it will look taller!

    • @DIY_AUTO_PHOTO
      @DIY_AUTO_PHOTO  3 роки тому +2

      I been thinking about taking them off.. so I might do that soon. )

    • @johnnyreb1475
      @johnnyreb1475 Рік тому +1

      Taking those shitty steps off my frontier was the first thing I did.

  • @carolrulle6729
    @carolrulle6729 3 роки тому +4

    Good luck with the tires! They look awesome!

    • @DIY_AUTO_PHOTO
      @DIY_AUTO_PHOTO  3 роки тому +3

      Thank you very much ! I really like how they look as well and they sure perform much better , before if it was raining and I was at light uphill going up from a stop my rear tires would spin few times.. no grip.. now I have no such issue

  • @chrissonik
    @chrissonik Рік тому +3

    This was extremely helpful, thank you! Gives me confidence in putting 285's on my stock Pro-4X! Subscribing!

    • @DIY_AUTO_PHOTO
      @DIY_AUTO_PHOTO  Рік тому

      Glad this video was helpful ! thats the point of me making them to help others )))
      Thank you for the sub as well ;) be sure to check out other videos ether for fun or for future mods ))

  • @uploadtime1780
    @uploadtime1780 Рік тому +3

    I wouldn't have went back to the same place if they are that incompetent. someone else would have earned my business.
    did you get a new alignment at all? the old tires look worn on outer edge, don't want you ruining the new tires with premature wear.
    thanks for the video.

  • @_moes_garage_
    @_moes_garage_ Рік тому +2

    Wow that's pretty sweet!

  • @jvh22a
    @jvh22a Рік тому +1

    I thought the blue/green lettering was permanent. Looks great

    • @DIY_AUTO_PHOTO
      @DIY_AUTO_PHOTO  Рік тому

      no its just temp paint on top of white letters to keep them clean... but they do also make this tires with red letters boy do those look good !

  • @jozettesalcido9854
    @jozettesalcido9854 Рік тому +1

    Hello did u check the date on your new tires? To make sure there new? It's a birthdate for the tires .. Also there two numbers and a letter right after the size of the tires. Make sure that you get the same number. The tire shop does not tell u about that number and letter number. Those two number and one letter has a purpose. It has to do with the speed which goes to your gauge..

    • @DIY_AUTO_PHOTO
      @DIY_AUTO_PHOTO  Рік тому +1

      Thank you so much I will be honest with you I did not looked at those numbers ))) but when I go to buy my next set of tires that I hope to upgrade them maybe by the end of the summer for something else I will for sure pay attention to that too )

  • @unclelala4216
    @unclelala4216 2 роки тому +2

    can you turn them around so there is no white lettering or do you order ones without the raised white lettering?

    • @DIY_AUTO_PHOTO
      @DIY_AUTO_PHOTO  2 роки тому +2

      yes during tire install you can tell mech to install them with black letters / white letters inside there is no problem with that )

  • @buzwa
    @buzwa Рік тому +1

    Those look great. Where did you buy them from?

    • @DIY_AUTO_PHOTO
      @DIY_AUTO_PHOTO  Рік тому +1

      Thank you ! I bought them online I was looking for best cheapest deal lol and in the end the discount tires was cheapest the price included replacement of tires and balancing them

  • @stephengray8777
    @stephengray8777 6 місяців тому +2

    What is the tiresize

    • @DIY_AUTO_PHOTO
      @DIY_AUTO_PHOTO  6 місяців тому

      Hey this tires were 285/75/16r size hope it helps )

  • @AdamAdam-di9bo
    @AdamAdam-di9bo Рік тому

    Did you get any VDC off and slip lights on after switching to bigger tires? I do have that problem I couldn't find a solution

    • @DIY_AUTO_PHOTO
      @DIY_AUTO_PHOTO  Рік тому +1

      No I didn't had that issue.. its strange that you have it must be something else.. not the tire size in your case

  • @BULLISHGUY-fg3so
    @BULLISHGUY-fg3so 2 місяці тому

    Hey friend .
    I just put a 285/75/16 hankook dynapro xtreme and after 60 mph start shaking a lot with vibration , did you experimented the same or some kind of vibration after installing those 285? Thank you in advance!

    • @DIY_AUTO_PHOTO
      @DIY_AUTO_PHOTO  2 місяці тому +1

      hey ! no sir ! I have not .. nor even with the 315s that I put later.. were the wheels balanced ? sounds like they are unbalanced and thats why at high speed that can do that

    • @BULLISHGUY-fg3so
      @BULLISHGUY-fg3so 2 місяці тому +1

      @@DIY_AUTO_PHOTO yes they are balanced, but one of them it was a trouble to get into balance , I really appreciate your answer!!
      Thanks to you. I know there’s something wrong. Definitely I have to check that out to see what’s going on.!

    • @BULLISHGUY-fg3so
      @BULLISHGUY-fg3so 2 місяці тому +1

      @@DIY_AUTO_PHOTO and thank you very much for all your videos!!
      They are very entertained And straight to the point !!
      🏆🏆🏆🏆🏆🏆🏆🏆🏆

    • @DIY_AUTO_PHOTO
      @DIY_AUTO_PHOTO  2 місяці тому +1

      @@BULLISHGUY-fg3so arlight !! glad you found the issue with one of the tires ! and I am glad and happy this video are helpful ! thank you very much for watching them

  • @Mr_Chode
    @Mr_Chode Рік тому +1

    will 1.5" wheel spacers make these rub when turning?

    • @DIY_AUTO_PHOTO
      @DIY_AUTO_PHOTO  Рік тому +1

      It shouldn't as it will push the wheels more out so I dont think so.. you can try like that but if not then still to do the "melt mod" is easy ) Good luck let me know what kind of results you get

    • @AdamAdam-di9bo
      @AdamAdam-di9bo Рік тому +1

      I put 285/70/17 on mine with 1.5" spacers and it's rubbing even after melt mod and mud flaps removed. Plus VDC off and slip lights on.

    • @Mr_Chode
      @Mr_Chode Рік тому +1

      @@AdamAdam-di9bo i ended up making a relief cut in the body under mudflap. There is a video on youtube of a guy doing it. gives you like another 1" of clearance. havent had a single rub since ive gotten the tires. that includes melt mod as well.

  • @mtn-endeavors67
    @mtn-endeavors67 Рік тому

    Are those load range e? If so how does it ride now?

    • @DIY_AUTO_PHOTO
      @DIY_AUTO_PHOTO  Рік тому +2

      The tires are still look and feel great !! very minimal road noise I would say.. and they still great

  • @Adventures_Of_Tin-Tin
    @Adventures_Of_Tin-Tin 2 роки тому

    What size of wheel do you got??

    • @DIY_AUTO_PHOTO
      @DIY_AUTO_PHOTO  2 роки тому +1

      Hey my full size is 285/75/16s so my rims are 16s and the tires are 285/75s ))