11 PowerStroke - no.2 Fuel injector
Вставка
- Опубліковано 4 вер 2024
- Hey guys welcome back thanks for watching. I just wanted to give a quick overview of what you needed to do in order to replace a number 2 injector on a 6.7 Powerstroke. Please remember to like and subscribe & again thanks for watching I'll talk to you guys later!!
I am the creator and owner of this material. It does not belong to; nor is affiliated with ANYONE, except for me, the owner and creator. Downloading is strictly forbidden. Contact me if you want my material, its that simple!
These 6.7 powerstrokes are great engines. The early 11's-12' had some turbo and glow plug issues but the newer models are bulletproof and can handle a lot of abuse
Yea i dig em a lot!!
Just gotta get rid of the cp4 dumpster fire of a pump
One of the better diesel videos I've seen
Any advice on how to help prevent an injector bolt from breaking while removing? I'm in the process of replacing all the injectors on my 2011 6.7 powerstroke. Cp4 failure.... 😞
Looks easier than the old 6.0,6.4 injectors for sure.. Nice overview.. Thanks
+ItsAlwaysRusty thanks bud
I always take a 3/8 extension and a small hammer and tap on the hold down to seat the injector. I'm too afraid of over torquing that bolt
Are those injectors leak oil cuz I have a 2017 f350 and I see like a little oil leak on the passenger side injectors it seems it comes from the injectors but those days was very cold I don’t know maybe its a gasket but I don’t know whats your opinion help me I don’t wanna take it to the dealer cuz I deleted the truck and only has 70k miles. What u think should I put back the original exhaust?????
Being deleted has no bearing. Ford, we have to prove that "it" caused your leak.........cmon🤦♂️
@@PowerStrokeTechTalkwARod thanks u king
@@PowerStrokeTechTalkwARod am following u too
That tech that does Thoroughbred Diesel videos, he said that he doesn't do one injector. He said that if you replace one that you should replace all of them. Do you agree with that sir? Damn, if that's true then that's mighty expensive. Thank you for making these videos buddy. Thumbs up on this video. 👍👍👍
I do NOT agree
@@PowerStrokeTechTalkwARod Thank you for getting back to me and your answer, take care buddy. 👍👍
You too guy!
How do you keep these fuel systems clean when you are working on these trucks? I have brake cleaned everything and used a shop vac to suck any loose dirt up around the whole area and I can still find tiny particles in the injector ports and stuff just from picking them up and pushing them in the holes. The rails I’m sure are getting tiny little particles in the ports, I can see like small carbon flakes down in the injector hole that you can’t even get to etc..do you even worry about small stuff getting in the system? I just imagine these fuel systems would be trashed if you got even a spec of dirt in the rails or injectors.
Im a cleeeeeeeeeeeeeean dude. I have no worries at alllllll. Very 1st time i did......teach u i will😉
when you pull the old injector out, is it like the 7.3 where you have to drain any oil out of the cylinder
If you take replace more than 1 injector on same side do you have to loosen the fuel rail?
No
Well it appears I broke one of those little plastic return lines. I was driving the truck and suddenly lost power and could hear an injector knock. I pulled over and the line had popped off the injector and was dumping diesel. Would that low pressure line cause the truck to barely move and make the injectors knock like that?
Yesss. It didnt just break by itself. Either the injector hold down busted & the injector popped out causing the line to break.....OR u just found out you have some sort of contamination in the HP fuel system that blocked the line, caused excessive return pressure & boooooom blew off. Hopefully its not contaminated cuz u just costed urself $11k LARGE!!!!!
@@PowerStrokeTechTalkwARod Luckily I had broken one of the little ears off of it when reinstalling and i thought i had it on there tight but it didnt hold i guess. got the new line on today and shes running good!
Thanks for the vid, great job. Do you have any tips for retrieving the copper washer if it don't come out with the injector? I've tried a pick and a wire but can't get it to move. Cylinder 3 2011 F450.
Ya need some dum dum....its real sticky like tar. Put it on a screw driver.....blink pull it out
Was going on a camping trip Yesterday with my 35ft 5th wheel . Reduce engine light came on , white smoke out the exhaust. Shop also said I had a sticking #2 injector. They are recommending changing all the injectors. Is this common ? Thanks for your opinion.
I wld do just the 1 brother
Brack down on expressway towed to Ford today in IA. Got codes, P04DA, P0299, P0263, P0269, and P0673. I’m guessing couple of those are fuel injects and one is glow plug. 2011 F350 6.7 powerstroke. How much are fuel injectors each.
2-3 hundo
What about the copper sealing washer? I didn't see that on the injector? Is it not necessary to pull out the old and put in the a new one?
Yes sir. If it's not on the injector then you're going to need to retrieve it
Before changing an injector do you typically check the volume control valve on the cp4 first?
Nope
Thanks for the reply. Im getting a max offset p02d5. Checked power balance and reset adaptive learning tables in TsB 16-0049. 1000 miles later its back, i havent seen any metal in the primary filter but shop wants to pull FVCV to check for metal before replacing injector. Should i just have them swap the injector without checking. As far as im aware we’ve found no evidence of contamination, metal or otherwise to suggest anything but a bad injector.
I have an 11' 6.7. Ran fine. Never had any issues with truck since I purchased at 90k. It now has 139k. Randomly yesterday it threw the p0266 at idle. Also making a fairly loud ticking from that side of engine. Could this be injector or am I possibly looking at a valve train issue?
It cld be. You wld have to get some diagnostic equipment in her...
@@PowerStrokeTechTalkwARod found the issue not long after. Broken hold down clamp.
New to smaller diesels, is there a procedure to prime the fuel lines back up or can you just crank it over after the install?
Crank it & send it
Have you seen any broken injector bolts when trying to remove the old one? I was replacing the injector grommets due to them leaking oil. And I had 2 brake. I had to remove valve covers in order to remove them. The truck had the injectors replaced at another shop previously so I am not sure if they had replaced the bolts or not.
Yea ive had many of em break, some do some don't....luck of the draw i guess..
Is this injector second going away from the radiator? Or the second going away from the firewall? My injector number two is going out, but I can’t tell from this video which injector it is.
Passenger side, 2nd one back....
PowerStroke Tech Talk w/ARod thank you!
Do you have any idea when don’t have power to the injectors 2017 6.7 liter I don’t have power to the injectors in my truck
Gotta go through the proper pin point tests to find out
@@PowerStrokeTechTalkwARod I already replaced the fuel real and the fuel sensor and filters and I checked the each connector to the injectors and not have power at all do you think can be the computer engine?
No The computer doesn't give the injectors power
The cramp for the return line on the injector cylinder number 2 is broken on mine can I replace just the clamp or do I need to replace the whole return line? If so would you happen to have the part number for the clamp
There are no clamps on the return lines. If that busted off you have bigger issues.....
Their clips one clips on to each injector on the little blue nipple it's a fuel return line to the filter
How do you get the pressure out of the lines or fuel rail before you start working on it?
By the time you're ready to take the high pressure lines off the pressure has already been depleted
Once again a good video , nice little socket there.
Great video Whats the cost for remplace a one fuel inyector on
$$$.$$
Wow, I tried to loosen one of the hold down bolts today again and no luck... how much effort should it take to break them loose?
They are 22ft lbs and an addtional 90° so its gonna take effort
So you leave the torque wrench set at 22 Ft. Lbs. and turn the bolt 90 degrees using the torque wrench?
Yea or get a ratchet & essentially do the same thing. Just tryin to shave some time...
If you value your torque wrench, don't use it to torque turn a fastener
Trust me itll b okay
I have a 2011 6.7 with 25k miles. It randomly throws a P02f3 code. First time it did it, I cleared it 3 times and stayed away for 500 miles. Second time, I got home, shut it down, 2 days later, no code and runs fine. What are your thoughts on this? I can't fine a trusty mechanic, I was thinking of checking for some type of wire connection issue. Don't want to just replace an injector.
We can go over some diag but you'll have 2 pay me for my time.
@@PowerStrokeTechTalkwARod that would be great. I'd take it to you if you were local.
Detroit
Do you have to take ac line off beside battery? I had a cylinder 2 injector back out which also broke the return fitting on top of injector when it dislodged ahh. and I’m looking at how to get more room! Any help or advice is appreciated with that backed out injector thanks! Awesome video and job!
Yea u can...just did that same shizz monday!
Did you just piece return fuel line together with a fitting in place of broken one? Crazy how it even raised the supply fuel rail up to!
And are the turn tabs that hold insulation pad just a twist and pull or do you have to take forever and unscrew those by hand?
No no buddy....that black return line is ALL one piece! It goes to each injector. It needs to be replaced too. Youll most likely have 2 get another injector hold clamp cuz it broke &...because it doesnt come with a new inj...just a bolt & hp line. When replacing that injector...remember it will need to be programmed in. There is a sticker in the bag with numbers on it (IQA#'s) that need to be entered into the trucks ECU
No they re just push pins. They always break. I never put that cover back on. Usless
So I am changing injectors due to CP4 failure. Do I need to clean down inside where the injectors go?
Maybe blow em out with the shop air ASSUMING you have left or dropped anything in there.....
@@PowerStrokeTechTalkwARod okay. I haven’t dropped anything in and I cleaned the engine/around everything I am working on with brake cleaner and blew everything off with a blow gun. Thanks for the help!
THANK YOU ! Awesome for sharing your time and knowledge. You are a good man!
Thanks so much, if you feel inclined & i helped you achieve your goal, swing by my Paypal. Take care!
Okay thanks man. Love your videos, very informative!
Appreciate that bud, share me around
@@PowerStrokeTechTalkwARod will do!
always enjoy the vid's ! thanks Aaron
+Mark Kennedy my pleasure!
Good job buddy thank you for your time and your experience good sound end clear video thank you for your time
Will a knocking injectors damage the engine?
Is this a certain way to place the injectors when installing them??? or should i just mimic the previous injector? i know it’s kind of a dumb question but i need to be sure! doing the job myself
Yepp mimic
PowerStroke Tech Talk w/ARod thanks man your a pal!
PowerStroke Tech Talk w/ARod another question passengers side is even injectors and drivers side is odd correct? This is for a 2011 ford f-250 btw.
No 1234 front to back passenger side. 5678 front to back drivers side
do you ever apply dielectric grease to the injector plug connector when you put them back with so many miles on vehicle
Fred Young not usually sometimes it squishes the rubber seal out. if the terminals are intact, i just leave em
so why is it manufactures seem to design engines you have to almost disassemble them just to do something simple? it's like remove 5 layers of hoses wires etc just to get to a bolt.
For the same reason you can't design a 1,000 seat theater with all seats being the front row.
@@buckhorncortez Oh but you can very easily. and you didn't have to tear apart the engine back in the '60-'80s and they had larger engines!
Would you recommend using an impact to remove or by hand?
Ummm by hand
I’m getting code p0304 p02d3 p0272 would this be number 4 injector
Yea
I'm getting P0272 and rough idle. What ended up being your issue?
What's the highest mileage 6.7 you have seen also do you think these 6.7 are pretty reliable and able to go to 200-300k
+Justin Taylor got a couple that come thru for regular maint with 400+. Good trucks engine is a goodie
PowerStroke Tech Talk w/ARod glad to hear that. I wanna run mine till the wheels fall off
+Justin Taylor Glad,...too hear that!!!
thank you.
Did you have to reprogram the new injector after install?
You do every time you replace an injector
Good luck 👍
Will it crank over if I just install it? I want to drive it straight to the dealer right after as they want to charge me $112 just to program the injector. Can’t imagine what they’d charge for the install.
Yes sir it will, might have an engine light on tho.
PowerStroke Tech Talk w/ARod alrighty, thank you. I appreciate the quick reply.
Thanks 4 watchin!!
2013 Ford 6.7. Fully Deleted at 55K
Truck has 95K now and a P1262 Cylinder #2 Injector High to Low Short
Runs fine for about 10 minutes into the trip and then misfire like symptoms with no power. Hooked up a Snap On Modis and turned the injectors off one by one and there was no real change when I turned #2 off. Wiring checks out, no chafing or shorts and connector is in good condition. Should I replace the #2 injector. Also will I need to re program the injector if it is Motorcraft and matches to VIN. If I have to change it can I do it with the modi’s with my tune profile still uploaded thanks
Yes replace the injector the only programming you're going to need to do which I don't think you can do with the Snap-on is to program the iqa numbers into the PCM for the injectors you replace
PowerStroke Tech Talk w/ARod can I program the IQA numbers with my tune still on the truck?
Yesssss
Just to be double Clear Cylinder number 2 is second cylinder back from the front of the vehicle on the passenger side
That is correct
Hey man great videos, just got a 6.7 and I wanna get some software on my laptop for reprogramming when I install parts. Can I download IDS myself or is forscan a good alternative? I just wanna be able to reprogram injections, transmission, and whatever I need to when it comes time to replace. Thank
Ive never used Forscan. U'd hafta look it up. All i use is IDS. It has a yearly subscription, $$$
@@PowerStrokeTechTalkwARod yes you can use Forscan under procedures
Yepp i know now 🙋♂️
If I ask the parts guy in the dealer to mach the existing fuel injector serial number ,I don't need the IDS to replace a bad injector?
False!
Hi. What is the torque spec for the 6.7 injectors for 2017?
22ftlbs....additional 90⁰
Thank you so much.
Can you tell me how to tell if my 6.7 is mfi or di? Thank you
Ahh di bro
money money money, love that blue, need to paint my truck
+Lucas McLain blue my FAV!!!!
lol
My 2013 F450 with 306k miles just threw a P0202 Code. Can this code be caused by anything related to an active regen that didn't finish before I shut down the truck and started it back up 15 minutes later after shopping? The outside temp was 67 degrees. Thanks for the help! I enjoyed watching this very thorough video!
Thanks bud. To answer, no.
@@PowerStrokeTechTalkwARod can that misfire cause a lot of damage internally? It misfired about 30 seconds and is now running fine.
Well i would say you answer your question there buckaroo
Do you have to lube the o-rings
Must go in dry
Im getting a p02d2 and a p02d8 on 2015 power stroke shop say they changed the injectors but the code came back any body else had this problem.
Nope
What is the torque procedure on tighting the injector fuel line?
+Alex Kirstein a good snug, then 1 more....ughh n your good. Its a learned feel, youll be alright.
Hand snug then It’s 14 lb ft. Then 26 lb ft. Tighten at injector first then at rail.
How many injectors have you had to shoot out due to the clamps breaking?
+F150orelse prolly a dozen or so...mostly cab chassis that ive found around here
I had a injector clamp break on my way home from the dealership I bought my 2011 from . truck was used and had just over a 100k on it , they had me tow it to the nearest dealership in Allentown Pa. to get it fixed , They put a new injector and fuel line and updated hold down clamp on it , it cost the dealership $1900 about 5 years ago , Always thinking if i should change the rest of the hold down clamps to the updated version
Can you see the iqa code with. The injector installed??
Yessssss
Thank you soooooooo much sir. Keep on keeping on!!
🔥💯💙
Iqa is on top correct?
Since 2011...
I have a #1 and #4 injector issue. can you explain the removal process?
Watch our videos outlining that
@@PowerStrokeTechTalkwARod did you lubricate the injector before inserting.
Very very slightly, ur not really supposed to
I have a question I have a 2011 with 80,050 had 4 injectors replaced in October 2021 and now Ford is telling me I need4 more injectors need replaced and can't tell me why I'm having issues. They tell me my fuel is good so what's the problem I ask. If you could give any suggestions I would appreciate.
Kinda hard from over herrr
look at you true pro. very informative. up sell them on new shocks.
+D4x4Bronc 😁😁😎😆
"not a freaking lug nut..." nice
+Patrick Salisbury gotta add that in. Haha...or dickus is gonna try a 3/4 impact to put it in
So I'm guessing that your everyday mechanic cant change out any of these injectors at home ?
You can, but you will need to get the new IQA numbers programmed into the pcm afterwards
@@PowerStrokeTechTalkwARod I'm watching your videos now good job how hard is it to change #8 I had a 7.3 for 17yrs I dis everything to it I havent dove into this 6.7 I was a heavy line mechanic 15 yrs for Chevy now I'm a field service heavy equipment mechanic 20+ yrs I have tools LOL
Cool
No 2 on passenger side
battery box is over kill in my opinion
#5 injector location
Front driver side
''gingerely"
can you program the new injector with snap on scan tool
+James Goodroe james, i duno if that has the capability...ive never used it. I always use IDS.
PowerStroke Tech Talk w/ARod thank you sir
+James Goodroe yes yes your welcome
Very very well step by step videos Aaron. It's really cool that you did this. At least it didn't seem like a son of a bitch to work on.
+Brian Skinner jst 4 U bub
Appreciate that man. Keep rolling more of these if ya can
Beveled flange
+Arden Briggs ahh there ya go lol!! A flangEE