Це відео не доступне.
Перепрошуємо.
How to Replace Radiator 1995-2001 Ford Explorer
Вставка
- Опубліковано 16 бер 2023
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/34/cd/radiator
This video shows you how to install a radiator on your 1995-2001 Ford Explorer. Overheating is a sure sign there’s something wrong with your cooling system. A leak, rust, or obstructions are all cases that may require a radiator replacement. Install a new TRQ radiator that’s engineered to fit your vehicle.
This process should be similar on the following vehicles:
1995 Ford Explorer
1996 Ford Explorer
1997 Ford Explorer
1998 Ford Explorer
1999 Ford Explorer
2000 Ford Explorer
2001 Ford Explorer
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obbW/1AXAA00013
• Pry Bar 1aau.to/oNq/1AXAA00020
• 16mm Wrench
• 19mm Wrench 1aau.to/oQ9/1AXAA00010
• 10mm Socket 1aau.to/oaXG/1AXAA00017
• 13mm Socket 1aau.to/obgo/1AXAA00015
• 8mm Socket 1aau.to/oaXG/1AXAA00017
• Fan Clutch Wrench
• Hose Clamp Pliers 1aau.to/oeT/1AXAA00076
• Pliers
• Side Cutters
• Ratchet 1aau.to/obrd/1AXAA00016
• Gloves 1aau.to/oME/1AXSS00048
• Safety Glasses 1aau.to/oF8/1AXAA00343
• Drain Pan 1aau.to/owa/1AXAA00320
• Pick 1aau.to/oJy/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Very good job ! I would have liked to have seen how to "burp" the engine block of air pockets after refill on this 5 liter engine and maybe how to discharge the AC prior to work. Thanks for doing this video. I have subscribed to your channel.
this video was helpful BUT! you don't have to remove serpentine belt or fan!!! this always happens on most you tube videos! they always remove more than necessary, you don't have to remove battery either CHRIST! it was a pretty smooth job actually, if you were lucky enough to read this comment i saved you at least and hour of labor not removing unnecessary parts! takes about an hour and a half to remove radiator, maybe less mine was a 5.0 v8 engine.
Is that the 4.0L engine? Is it the same on the 4.6L engine. The removal process?
Nice
What the belt does the same car no belt required to take out
Can the explorer run with the condenser deleted!??
save serious money and buy radiator from rock auto for $112 in 2024, freakin o' Reilly wants $280, your lucky you read this comment, also read my comment below on removing less parts than you have to
2:00 to 3:30 is cringe