You guys make boat work look fun (not that it isn’t…). Matt’s screwball engineering still gets Kristin looking at him with love, that’s the biggest accomplishment so far.
Hey Matt, take your router to those steps. Put in some treads, better grip and somewhere for the water to go. Slippery when wet is good for certain things but not steps. Thanks guys, great stuff.
Matt...proud of you! Over the last hand full of years, you have come a very long way...starting with having the proper tools! When you started you had a couple of tools and completed the task..." gangsta" style! Now, the end result is a solid build and very good-looking! Congratulations!
I agree, having the proper tool always makes the job easier at the end, kudos 👏 🙌.. my only suggestion would be is use the proper fasteners too. The screws that you use to fastening those steps are for drywall and regular wood. Treated Lumber has so much chemical on it that it time it eats those screws and I don't think you want to found out while stepping on it for sure and see a Debbie down 😉😆
In a marine environment , think stainless steel ! I guess it's the next guys problem when you sell this one and get that new Seawind 1600 catamaran with dagger boards and retractable rudders so you can have a 2 foot draft in the Bahamas !
the "hold-back bar" as mentioned is known as a "fiddle" or "fiddle rail". they are common on boats...especially sailboats. often seen on tables and shelves.
You two are fast becoming my fave watch, due to content coming out fast and let's face it the way you so things is so how I would, keeping it real " Sailing GBU" #1 sailing channel 🤟🤙🤜👍👌😁⛵️
One of my favorite things about this channel is that you two are together as a couple having this adventure. One of life's greatest gifts is togetherness and oneness with your partner. Thanks for just being together in your videos. Life together can be so sweet!!!!
Uncle Matty, Dan is absolutely correct! You got WEST System in your tool kit, smear a thin coat on the back of those steps and THEN screw them in, and you'll have to break the plywood out before those screws will pull through. Your old steps had the benefit of the "side rails" to provide support out at the leading edge of the step. Your new design is a "cantilever" arrangement, and while indeed beautiful and stylish is MUCH weaker when a load (i.e. "body weight") is placed on the unsupported edge. It might "seem" fine while sitting in flat water in the marina, but body weight gets multiplied when someone is standing on those steps in heavy seas and the boat falls off 5-ft waves. Shower Niche turned out nice! Keep up the good work and the entertaining videos! I salute your efforts!
You two have shown so many people you can have a beautiful boat on a budget along with no yacht marina snobbery either,great job and god bless you both.and also keep the donut dusting stash🤣
I have been a building things for decades. I have one motto on design Build. Build it knowing sooner or later some couple is going to screw on it. It gives you a perspective on live loads. Glad to see you are keeping up that proud tradition.
Matt....As a Stair builder by trade.....you did a nice job on the steps, however due to the grain direction, you will need to put a corbel (brace) under your treads. Or place sides that house the treads in a route. While the wood is green it is flexible (slightly) but as it dries out (even at sea) it WILL split. not picking at all, I am amazed at your abilities. but here I lend some advise!!
I had thought about the splitting as well. Would lag screws sized to extend most of the width of the tread stop the tread from splitting? Say three lags with a large washer per tread?
Uncle Matty strongly consider Robert's advice...........he's absolutely correct about the grain alignment, which in an unsupported "cantilever" step design will likely break off one day. I had a sailing friend fracture his tailbone in a similar "boat ladder incident".
Great couple and great fun to watch, keep it coming. I love you guys! After this video, I keep waiting to hear his response to "have you lost your mind." I'm hoping to hear: "Of all the things I've lost it's my mind I miss the most."
I always use one of those detachable shower heads with adjustable range of sprays including a pulse spray. A fixed shower head does not work well on a boat when you have limited space and on the lean. The head clips into a fitting and has a flexible hose. I think mine was twenty five bucks.
I have totally lost the boat yard timeline. How long have you been in the marina so far on these projects? It should also be noted that you look particularly lovely today Kristin.
Oh Matt, those steps are not safe. It is ESSENTIAL that the steps have sides to them. Because when the boat is heeling when going upwind they will be angled at anything up to 30 degrees and despite having anti-slip on them your feet will slip off and you will end up in a heap on the cabin sole. They are also not strong enough for everyday use and need at the very least triangle shaped wooden support pieces, two to each step screwed/glued to the base of each step and the vertical engine cover. Cockpit to saloon steps are just about the hardest worked areas of any boat and must be bulletproof.
I agree with a couple of other comments. Screws need to be S/S. And your steps will get so much wear that all the edges of your covering will be a place to de-laminate. Plus rounded edges come loose easily. Maybe just stain and install rubber mat on top. Nice work with so little tools. I'm impressed.
Matt :) you should have sanded the old steps and used them. The ones you made need more supports because they will loosen and break the way they are now.
Best idea yet. And if Matt needed a new project for content, he could have built stairs like the old ones just with stronger material for the application and deeper steps. As they say, "If it ain't broke, don't fix it."
For your steps. You could cut Triangles to go under the steps and bolt it with large screws from back. The size could be 2/3 the depth of the tread. Nice job when you finish.
I try to never miss an episode. This boats gonna be fantastic. It already is because. You made it the qay you want. And that's the best 🏡 home! On a Sail boat ⛵️ .
You two are hitting it out of the park! Great jobs! This refit/remodel is going to be one for the ages! I can hardly wait to see the end result! Outstanding! Bear isn’t going to recognize the place, lol! Take care of each other and see you next week!
Y’all are making a lot of progress and there is light at the end of the tunnel. I am excited to see the finished product. Matt I hope you had the outside of the boat painted where it was damaged, at least getting it done early will help it to fade evenly over time. Y’all are keeping a very positive attitude and that alone accounts for 60% success of the project.
Love the way Kristen's interior decorator comes out in the bathroom there. I have no ID skills though so I'm unqualified to leave a suggestion as to decor. Love to watch Matt's sturdy building skills. Looks like the way I'd build things. The fish tanks under the steps would look cool, but probably be a pain to keep clean. Besides, there's a much bigger and better fish tank right outside the boat. Love ya'll, keep up the good work.
I appreciate how you are incorporating Feng shui into your designs. The translation for Feng shui is "the way of wind and water" which seems highly appropriate for your project. I really enjoy your content and wish you the best of luck!
As a boat owner and live aboard sailor I’ve been enjoying watching the hilarious interactions between you two since the beginning and I’ve commented previously on the frightening similarities between Matt and myself (in my younger rambunctious days). YOU TWO ARE PERFECT ! Keep up the great refitting on your home ❗️ I can’t wait to see the finished product ! (Which is an oxymoron because NO sailboat is ever “finished “ !)
Great progress this week Christian and Max! Hyped to see the niche in action when it’s all done! Have you thought about tropical print vinyl to cover the inside of the shower walls? Maybe with a colourful toucan?
Matt...I would bond those pvc joints to make them stronger and water-sealed. Some lightweight framing behind that stair panel for screws, would be good...maybe varathane with an anti skid stickers, instead of veneer that will eventually delaminate? 🤔 There is a light at the end! 👍
G'day Matt & Kristen, as a certified marine contractor & boat builder, in Western OZ 🇦🇺, I reckon you've saved an absolute shitload of money 💰 in labour mate, by doing it yourself....and yes, "shitload of money" is an actual denomination, in regards to sailboat rebuilds, refits and upgrades, here in Australia...LOL ;) To be honest, I tried me hardest @ 21:54 to either close me eyes or look out the window, but it was definitely difficult 😀. When you start a project to refit or replace a section of your sailboat, inevitably, your project soon increases in size, and you're now completely rebuilding or upgrading the entire boat. You cheeky monkey 🐒 🙈 🙊. Best of Luck ~ You both are doing an amazing job and I truly love your attitudes. Good onya GBU ⛵️! Cheers from Margaret River, Western Australia 🇦🇺.
Matt, Stainless screws brother! Those non-stainless are going to rust and discolor that beautiful Niche, Nook, Shower Thingie. Once again…you started a project and didn’t finish it….just left it and started another one. Would love to see you guys finish a project in an episode instead of leaving us hanging every week and never really knowing what the finished product looks like……but then again, you always keep us guessing and tuning in! Can’t wait until you guys are back out on the hook!
Holy crap there MAX, I have watched every one of your rebuild videos. You are actually getting much more adept at carpentry which makes your comedic commentary much richer. Keep that cadence up sir, well done.
I won't say it will be easy ... but ... +1 for the fishtank idea! You guys take pride in "doing things outside of the ordinary". That would give the boat a multi-milionaire-party-time interior look and you can catch and preserve those fresh fishes while cruising.
you are a very enjoyable duo, the dynamics between you is what makes watching you so great. "Max" 's years of cabinet-college education finally pays off ! I love to see his Workmate-bench techniques, using saws and drills balancing the woodwork on his knees. Love the safety equipment he uses ... ;-) "Christian" time for you to start thinking about colors & finishing touches, "Max" is almost done !
I was wondering if you could have used pvc solvent to stick the parts of the niche together. If it can, it may make the corners smoother and the niche one solid unit without screws. Just wondering
Thank you Kristen for saving all of Matt’s extremities! He needs those but he just doesn’t know yet. Definitely my favorite channel on UA-cam. Sailing GBU got me hooked on UA-cam. I started watching your channel and I couldn’t put it down. You two are awesome! The proof is in the pudding! 🧐
I’m concerned, I’m going to the doctor next week. My fear is I won’t live long enough to see just one of your projects completed. Actually you are doing a great job and no missing digits yet.
I love that you used the word crescendo for the larger step. That made complete sense to my muddled brain that often has a hard time finding the right word.
Matt: "I am pretty straight when you get to the shaver" Kristin: "Not funny..." OMG, how I love the chemistry between you two! You really are something to look forward every Sunday morning!!! Down to the Earth, great sense of humor and working like slaves on your future perfect floating home! Keep it up! (Not you Matt... ) LOL
Hey Matt, you need a bigger 4 or 5 Ah battery so the skill saw does not struggle to cut through the 2X, great episode, you guys are personalizing your boat, making it home, that is awesome!
Hi GBU; another great video. You could install a bungee-type elastic cord to secure your items on the niche shelf. It could be stretched and attached to hooks, or whatever, so as to cover the whole unit; when putting items on and off the shelf. Just an idea.
You guys are so great to watch! Always having fun with plenty of laughter. I really enjoy watching Matt’s way of carpentry. Keep up the awesome work guys. Ra from New Zealand.
I think I would have repurposed the existing steps. you could have taken them apart cleaned them up made them look great they were super strong the way they were built and would handle any extra force that would be put on to them as you're going up and down them while the boat is going up and down on waves and increasing your weight on the stairs.
The steps are a problem. When you apply weight to the outer edge, it's creating a rotational force, with the front edge of the support acting like a fulcrum; the back edge of the step is rotating upwards while the front edge is going downwards from your weight. It's going to be trying to pull the screws out. You've almost got a crowbar action there, lifting up on the screws. You can either put a brace on the top of the step like the one underneath to stop the upwards rotational force, or route a slot for the step to fit into. Or, a brace that forms a triangle, one side against the back wall, one side the width of the step, and one side open. There won't be any rotational forces then. Love the show! I also added to Patreon so you'll be sure and see.
Matt the problem with cutting through treated lumber is your toy battery. I use rigid tools they came with a 2ah toy battery also. I have since purchased a 9ah battery. My tools are now night and day different.
My 2 cents: Should always use brass or stainless steel screws. Once the black metal screws begin to rust and stain you'll be sorry. Rather than wallowing holes for counter sink screw heads just get a cheap counter sink drill. That makes for a much neater job. Also, as mentioned several times, marine glue is a must. There is zero glue in your entire project. Regarding the steps, side rail support is a must for a lasting job under rough sea conditions. Just being helpful, not critical. I do like your project videos. Y'all are working hard, always!
Hey from NC guys! Nice job with the upgrades. Just a couple observations...I would glue everything, wood and PVC. Those steps had vertical stringers for a reason. I would consider that. Everything looks great! Thanks for sharing your adventures with us!
Hi Matt and Kristen. Been an interesting view so far. A suggestion to add at least 2 more lag bolts to the stairs. One bolt is probably insufficient to really secure the steps since the screws you used were small.
Glad your dingus survived! You are going to have a new career as a cabinet maker! Enjoy your episodes, keep it up Matt. Can't wait until the engine goes in!
My vote is for stainless steel fixtures and black accents or trim. Also think about some battery operated lights and where to put them. Doing a great job. Can't wait to see it finished. Also very interested in how you get your engine installed and hooked up.
Stop worrying about all these haters. Do you boo-boo. You guys are doing great and I personally love watching all the things your doing to that boat !!
Anthropomorphic ...! Yeah, it fits! human like characteristics, I looked it up;) I recently lost someone very close to me and needed cheering up today. My first thoughts were to check see how you two are doing, always happy to see how you both get along. Be good to one another, "You don't know what you got till it's gone" ..., so so true!!
Looking good, but I would suggest putting stainless steel mudguard washers (probably called fender washers over there) to help the bolts to spread the load on the woodwork and will help prevent the bolts working loose if the timber gets damp
Recently found your channel and have been going back and watching previous videos. Love the enthusiasm from both you and looking forward to seeing more of your refit. Keep up the humor and enjoy each day.
Needless to say, cause it's to late now but I've got to pass this on to y ou Matt. Your doing so much with PVC which I totally agree with. I love the stuff. BIIT, you can put it together with PVC cement/glue. I dries fast and will not rust or oxize like nails or screws will. It's also water tight so shower water won't get through the joints and into the inside of your wall. Love your show.
Hey Matt and Kristen, whistle while we work oh we whistle while we were. I can just see you two now whistling away while you're working on your cruiser. About your bathroom, just black or black or black and stainless steel. Interesting you all doing those areas projects but look forward to you all sailing the seas. By the way when are you going to get your new diesel engine? Well take care and look forward to your next one. Bon voyage
Hi you two always enjoy your jobs you do. I was a bit time poor, so i watched you at 1.5 speed, I have got to say it took you in to a whole other world and not a bad one. Love what you do and how you do it, the boat will be amazing when you finish. Cheers from Australia!
successfully used elastic cord (like Bungy cord) for retaining items on recessed shelving (2 tiered lower/upper) ... this allows for movement without risk of losing stuff in rough seas ... it also allows for easy access of maximum sized items ... and finally will accommodate oversized items ... simple to install ... simple to replace (rubber eventually wears out) ... our toy sail boat (23.5' trailerable) lives in Canada outside year-round ... typically have to replace these cords every 2 years ... did I mention this cord is cheap > $1/Yard
Matt, you will regret not using hearing protection when using power tools, especially the Skilsaw. You are doing a great job but please protect your hearing if you want to continue hearing the sound of the4 sea!!!!!This is meant with good will towards your future. Carry on, you guys are just great !!!!
Today was a good day, I finally caught up to present day after watching all the episodes from the start. Best sitcom going! I worked construction for many years and Matt's comments about young engineers and OGs was spot on! Love the channel!
We have rain water collection tarps and a 3 gallon Solo457 bug sprayer with a sink pistol for freshwater showers. It shoots water just like a residential tap. Add a gallon of boiling water and it makes a perfect warm water spray.
Betty - Boo, just doin' the do! Never wanted yo be so brash, but what she does for presentation is just priceless. My 3 adult age daughter's, my wife, just adore her. What a gem of a woman, what a darling. Warmest regards from Sydney and Ballina. MATE!!!
Instead of a galley rail in the shower niche a 3/4" Clear Acrylic Plexiglass Rod will contemporize hold your shampoo plus have strength to provide as a handle in rough seas
I have been super impressed with how innovative you are with the tools. Lacking a table saw, you have clamped down a framing square as a fence/guide. For using a circular saw and hand tools your projects come out amazingly square and flush etc. Nice job!!!
I was thinking for accessorizing , as Kristen likes black, the Matt beater shirt look in a shower curtain with the GBU design would be awesome. Naturally that got me to thinking the fabrics and cushions in the salon should definitely be GBU logo embossed but maybe with some tropical parrot colors. Finally I just grabbed some beers and laid down till these ideas went away. Great work kids.
You know that PVC sheet glues really well with superglue. Also if you heat it with a hot air gun carefully , you can bend it to almost any shape. Im so glad your using this PVC sheet, make sense on a wet boat. Great job.
You guys make boat work look fun (not that it isn’t…).
Matt’s screwball engineering still gets Kristin looking at him with love, that’s the biggest accomplishment so far.
Hey Matt, take your router to those steps. Put in some treads, better grip and somewhere for the water to go. Slippery when wet is good for certain things but not steps. Thanks guys, great stuff.
Wet wood can be super slippery.
Mateo. THIS is a Great suggestion! TREADS, TREADS!!!
Non skid paint is an option.
you can also apply Skateboard tape...your doing a great job
Matt...proud of you! Over the last hand full of years, you have come a very long way...starting with having the proper tools! When you started you had a couple of tools and completed the task..." gangsta" style! Now, the end result is a solid build and very good-looking! Congratulations!
I agree, having the proper tool always makes the job easier at the end, kudos 👏 🙌.. my only suggestion would be is use the proper fasteners too. The screws that you use to fastening those steps are for drywall and regular wood. Treated Lumber has so much chemical on it that it time it eats those screws and I don't think you want to found out while stepping on it for sure and see a Debbie down 😉😆
In a marine environment , think stainless steel ! I guess it's the next guys problem when you sell this one and get that new Seawind 1600 catamaran with dagger boards and retractable rudders so you can have a 2 foot draft in the Bahamas !
the "hold-back bar" as mentioned is known as a "fiddle" or "fiddle rail". they are common on boats...especially sailboats. often seen on tables and shelves.
You two are fast becoming my fave watch, due to content coming out fast and let's face it the way you so things is so how I would, keeping it real " Sailing GBU" #1 sailing channel 🤟🤙🤜👍👌😁⛵️
That’s facts
That grey shirt at the end is how I found them and one more button undone would keep me coming back. Lol🤣
@@sea-lifefree-life4585 Same here. 😊
One of my favorite things about this channel is that you two are together as a couple having this adventure. One of life's greatest gifts is togetherness and oneness with your partner. Thanks for just being together in your videos. Life together can be so sweet!!!!
Still my best people to watch, you guys are great. Matt, using your leg for a skill saw table---really, what could go wrong????
Hi Matt For a stronger bond you need to use glue. The glue bond is stonger than the one from screws.
Uncle Matty, Dan is absolutely correct! You got WEST System in your tool kit, smear a thin coat on the back of those steps and THEN screw them in, and you'll have to break the plywood out before those screws will pull through. Your old steps had the benefit of the "side rails" to provide support out at the leading edge of the step. Your new design is a "cantilever" arrangement, and while indeed beautiful and stylish is MUCH weaker when a load (i.e. "body weight") is placed on the unsupported edge. It might "seem" fine while sitting in flat water in the marina, but body weight gets multiplied when someone is standing on those steps in heavy seas and the boat falls off 5-ft waves. Shower Niche turned out nice! Keep up the good work and the entertaining videos! I salute your efforts!
Matt, listen to Dan and Panchito, unscrew the steps and wood glue the steps. They are also water proof wood glue.
You two have shown so many people you can have a beautiful boat on a budget along with no yacht marina snobbery either,great job and god bless you both.and also keep the donut dusting stash🤣
Those drywall screws are gonna rust out asap.
When Matt's sleeping his mustache climbs off his face and goes hunting for bilge rats.
My first choice to watch on Sunday morning, Kristen bouncing on Matt’s new steps made the whole day 🤩😉. Thanks 😊
Well, it seems you're not the only one appreciating natural beauty here, Mr Farmer ! 😊😊
I have been a building things for decades. I have one motto on design Build. Build it knowing sooner or later some couple is going to screw on it. It gives you a perspective on live loads. Glad to see you are keeping up that proud tradition.
Matt....As a Stair builder by trade.....you did a nice job on the steps, however due to the grain direction, you will need to put a corbel (brace) under your treads. Or place sides that house the treads in a route. While the wood is green it is flexible (slightly) but as it dries out (even at sea) it WILL split. not picking at all, I am amazed at your abilities. but here I lend some advise!!
I agree with him to put triangles...!!
I had thought about the splitting as well. Would lag screws sized to extend most of the width of the tread stop the tread from splitting? Say three lags with a large washer per tread?
@@sazeraq2055 in the short term yes, however bolts tend to bend. the best would be to laminate plywood.
Uncle Matty strongly consider Robert's advice...........he's absolutely correct about the grain alignment, which in an unsupported "cantilever" step design will likely break off one day. I had a sailing friend fracture his tailbone in a similar "boat ladder incident".
Great couple and great fun to watch, keep it coming. I love you guys! After this video, I keep waiting to hear his response to "have you lost your mind." I'm hoping to hear:
"Of all the things I've lost it's my mind I miss the most."
For the bathroom niche. Consider a stretchy mesh. Use them all the time in RV world. Amazon has tons to choose from.
I always use one of those detachable shower heads with adjustable range of sprays including a pulse spray. A fixed shower head does not work well on a boat when you have limited space and on the lean. The head clips into a fitting and has a flexible hose. I think mine was twenty five bucks.
Hey Uncle Matty a nook like that in the Navy is called a Douch Locker!
Fantastic episode! Love Matt's use of "anthropomorphic"---placing human characteristics on non-human entities.
I have totally lost the boat yard timeline. How long have you been in the marina so far on these projects? It should also be noted that you look particularly lovely today Kristin.
Oh Matt, those steps are not safe. It is ESSENTIAL that the steps have sides to them. Because when the boat is heeling when going upwind they will be angled at anything up to 30 degrees and despite having anti-slip on them your feet will slip off and you will end up in a heap on the cabin sole. They are also not strong enough for everyday use and need at the very least triangle shaped wooden support pieces, two to each step screwed/glued to the base of each step and the vertical engine cover. Cockpit to saloon steps are just about the hardest worked areas of any boat and must be bulletproof.
I agree with a couple of other comments. Screws need to be S/S. And your steps will get so much wear that all the edges of your covering will be a place to de-laminate. Plus rounded edges come loose easily. Maybe just stain and install rubber mat on top. Nice work with so little tools. I'm impressed.
Stainless screws is all I put on my boat. Do t want to slip when steps get wet are my worries too
Matt :) you should have sanded the old steps and used them. The ones you made need more supports because they will loosen and break the way they are now.
Best idea yet. And if Matt needed a new project for content, he could have built stairs like the old ones just with stronger material for the application and deeper steps.
As they say, "If it ain't broke, don't fix it."
All looks good! Max and Christian, Y’all Rock!
I really like what you have done with the PVC instead of plywood, it has worked great. It will last forever. I'd go with the stainless-steel fixtures.
I absolutely lost it with the Dog ears LOL 😆 😂 🤣 😅 😭
For your steps. You could cut Triangles to go under the steps and bolt it with large screws from back. The size could be 2/3 the depth of the tread. Nice job when you finish.
I try to never miss an episode. This boats gonna be fantastic. It already is because. You made it the qay you want. And that's the best 🏡 home! On a Sail boat ⛵️ .
Susan & Tony here, I am a builder here in Michigan and have built many shower niches, Good Job!, my man.
You two are hitting it out of the park! Great jobs! This refit/remodel is going to be one for the ages! I can hardly wait to see the end result! Outstanding! Bear isn’t going to recognize the place, lol! Take care of each other and see you next week!
So true. I liked the SV Uma remodel and this one is up there. I cant wsit to see the end result.
Y’all are making a lot of progress and there is light at the end of the tunnel. I am excited to see the finished product. Matt I hope you had the outside of the boat painted where it was damaged, at least getting it done early will help it to fade evenly over time. Y’all are keeping a very positive attitude and that alone accounts for 60% success of the project.
Love the way Kristen's interior decorator comes out in the bathroom there. I have no ID skills though so I'm unqualified to leave a suggestion as to decor. Love to watch Matt's sturdy building skills. Looks like the way I'd build things. The fish tanks under the steps would look cool, but probably be a pain to keep clean. Besides, there's a much bigger and better fish tank right outside the boat. Love ya'll, keep up the good work.
I appreciate how you are incorporating Feng shui into your designs. The translation for Feng shui is "the way of wind and water" which seems highly appropriate for your project. I really enjoy your content and wish you the best of luck!
As a boat owner and live aboard sailor I’ve been enjoying watching the hilarious interactions between you two since the beginning and I’ve commented previously on the frightening similarities between Matt and myself (in my younger rambunctious days).
YOU TWO ARE PERFECT ! Keep up the great refitting on your home ❗️
I can’t wait to see the finished product ! (Which is an oxymoron because NO sailboat is ever “finished “ !)
I don't sail or do anything to do with boating,but I watch you two because you are both entertaining 👍👍
Great progress this week Christian and Max! Hyped to see the niche in action when it’s all done!
Have you thought about tropical print vinyl to cover the inside of the shower walls? Maybe with a colourful toucan?
don't you know they spell their names Kristian and Maxx? 😂
Matt...I would bond those pvc joints to make them stronger and water-sealed.
Some lightweight framing behind that stair panel for screws, would be good...maybe varathane with an anti skid stickers, instead of veneer that will eventually delaminate? 🤔
There is a light at the end! 👍
I’ve been wondering why you never glue anything. It ads so much strength.. love watching you guys.
Awesome work as usual guys. I love the way she stares at you, smiling, when you talk, Matt. You can tell she is nuts about you!
G'day Matt & Kristen, as a certified marine contractor & boat builder, in Western OZ 🇦🇺, I reckon you've saved an absolute shitload of money 💰 in labour mate, by doing it yourself....and yes, "shitload of money" is an actual denomination, in regards to sailboat rebuilds, refits and upgrades, here in Australia...LOL ;) To be honest, I tried me hardest @ 21:54 to either close me eyes or look out the window, but it was definitely difficult 😀. When you start a project to refit or replace a section of your sailboat, inevitably, your project soon increases in size, and you're now completely rebuilding or upgrading the entire boat. You cheeky monkey 🐒 🙈 🙊. Best of Luck ~ You both are doing an amazing job and I truly love your attitudes. Good onya GBU ⛵️! Cheers from Margaret River, Western Australia 🇦🇺.
The renewed boat is taking shape now, congrats!!
Matt, Stainless screws brother! Those non-stainless are going to rust and discolor that beautiful Niche, Nook, Shower Thingie. Once again…you started a project and didn’t finish it….just left it and started another one. Would love to see you guys finish a project in an episode instead of leaving us hanging every week and never really knowing what the finished product looks like……but then again, you always keep us guessing and tuning in! Can’t wait until you guys are back out on the hook!
Holy crap there MAX, I have watched every one of your rebuild videos. You are actually getting much more adept at carpentry which makes your comedic commentary much richer. Keep that cadence up sir, well done.
I won't say it will be easy ... but ... +1 for the fishtank idea!
You guys take pride in "doing things outside of the ordinary".
That would give the boat a multi-milionaire-party-time interior look and you can catch and preserve those fresh fishes while cruising.
you are a very enjoyable duo, the dynamics between you is what makes watching you so great.
"Max" 's years of cabinet-college education finally pays off ! I love to see his Workmate-bench techniques, using saws and drills balancing the woodwork on his knees. Love the safety equipment he uses ... ;-)
"Christian" time for you to start thinking about colors & finishing touches, "Max" is almost done !
I was wondering if you could have used pvc solvent to stick the parts of the niche together. If it can, it may make the corners smoother and the niche one solid unit without screws. Just wondering
Thank you Kristen for saving all of Matt’s extremities! He needs those but he just doesn’t know yet. Definitely my favorite channel on UA-cam. Sailing GBU got me hooked on UA-cam. I started watching your channel and I couldn’t put it down. You two are awesome! The proof is in the pudding! 🧐
I’m concerned, I’m going to the doctor next week. My fear is I won’t live long enough to see just one of your projects completed. Actually you are doing a great job and no missing digits yet.
Stay strong.
Mike I will pray for you, it's one of many things I hate to hear. But God is with you.
God bless you
👍 Mike. Prayer for you.
you and me both LOL.
Just saw your comment. How are you doing Mike?
I love that you used the word crescendo for the larger step. That made complete sense to my muddled brain that often has a hard time finding the right word.
Matt: "I am pretty straight when you get to the shaver" Kristin: "Not funny..." OMG, how I love the chemistry between you two! You really are something to look forward every Sunday morning!!!
Down to the Earth, great sense of humor and working like slaves on your future perfect floating home! Keep it up! (Not you Matt... ) LOL
Hey Matt, you need a bigger 4 or 5 Ah battery so the skill saw does not struggle to cut through the 2X, great episode, you guys are personalizing your boat, making it home, that is awesome!
Hi GBU; another great video. You could install a bungee-type elastic cord to secure your items on the niche shelf. It could be stretched and attached to hooks, or whatever, so as to cover the whole unit; when putting items on and off the shelf. Just an idea.
Stainless steel with black accents for sure in the bathroom. Great job Mattie on the niche!
Easily one of your best videos. Vibe, camera angles, progress,... Very nice guys.
You guys are so great to watch! Always having fun with plenty of laughter. I really enjoy watching Matt’s way of carpentry. Keep up the awesome work guys. Ra from New Zealand.
I think I would have repurposed the existing steps. you could have taken them apart cleaned them up made them look great they were super strong the way they were built and would handle any extra force that would be put on to them as you're going up and down them while the boat is going up and down on waves and increasing your weight on the stairs.
It's a cloudy. gloomy morning here but this brightened my day! You guys are so fun to watch! Can't wait for the next one!
Ohhh Yeah Max.......The Laser guided Sabre Saw!!!!!!!! Nice!!!!!!
Always impressed by Matt’s triangle and measuring twice cut one style
The steps are a problem. When you apply weight to the outer edge, it's creating a rotational force, with the front edge of the support acting like a fulcrum; the back edge of the step is rotating upwards while the front edge is going downwards from your weight. It's going to be trying to pull the screws out. You've almost got a crowbar action there, lifting up on the screws. You can either put a brace on the top of the step like the one underneath to stop the upwards rotational force, or route a slot for the step to fit into. Or, a brace that forms a triangle, one side against the back wall, one side the width of the step, and one side open. There won't be any rotational forces then. Love the show! I also added to Patreon so you'll be sure and see.
Matt the problem with cutting through treated lumber is your toy battery. I use rigid tools they came with a 2ah toy battery also. I have since purchased a 9ah battery. My tools are now night and day different.
My 2 cents: Should always use brass or stainless steel screws. Once the black metal screws begin to rust and stain you'll be sorry. Rather than wallowing holes for counter sink screw heads just get a cheap counter sink drill. That makes for a much neater job. Also, as mentioned several times, marine glue is a must. There is zero glue in your entire project. Regarding the steps, side rail support is a must for a lasting job under rough sea conditions. Just being helpful, not critical. I do like your project videos. Y'all are working hard, always!
You two are really stepping up your reno's game! Excellent work!
For the bathroom LED mood lighting !
Hey Matt, I'm still impressed how you can make cabinets, drawers, shelves with just a circular saw. Great videos.
Hey from NC guys! Nice job with the upgrades. Just a couple observations...I would glue everything, wood and PVC. Those steps had vertical stringers for a reason. I would consider that. Everything looks great!
Thanks for sharing your adventures with us!
Hi Matt and Kristen. Been an interesting view so far. A suggestion to add at least 2 more lag bolts to the stairs. One bolt is probably insufficient to really secure the steps since the screws you used were small.
Glad your dingus survived! You are going to have a new career as a cabinet maker! Enjoy your episodes, keep it up Matt. Can't wait until the engine goes in!
My vote is for stainless steel fixtures and black accents or trim. Also think about some battery operated lights and where to put them. Doing a great job. Can't wait to see it finished. Also very interested in how you get your engine installed and hooked up.
Great video, you two.. BTW, On a boat the "holdback bar" is called a Fiddle Rail. The lip around a table or counter top is just a Fiddle..
Hey Frank. You’re doing a great job. Keep it up.
Tell Alice she’s looking good too.
Stop worrying about all these haters. Do you boo-boo. You guys are doing great and I personally love watching all the things your doing to that boat !!
Anthropomorphic ...! Yeah, it fits! human like characteristics, I looked it up;)
I recently lost someone very close to me and needed cheering up today. My first thoughts were to check see how you two are doing, always happy to see how you both get along.
Be good to one another, "You don't know what you got till it's gone" ..., so so true!!
anthropomorphic fits Coolie just fine! Thanks for sharing.
Looking good, but I would suggest putting stainless steel mudguard washers (probably called fender washers over there) to help the bolts to spread the load on the woodwork and will help prevent the bolts working loose if the timber gets damp
Hi Guys! Next time leave the protective film on your board until your done cutting and drilling. Love your work. Be Safe
Progress - yummy. New motor, new stove, fresh water on demand, new look . Keep punchin. San Blas, South Pacific on the horizon !!!!
Recently found your channel and have been going back and watching previous videos. Love the enthusiasm from both you and looking forward to seeing more of your refit. Keep up the humor and enjoy each day.
put a little window in that shower. maybe you could even make it a vent type window. you guys are awesome. love the videos!!
The sweat-equity in this boat is beyond cost...precious. I hope you have a very energetic first-sail when done. Kuddos to both of you.
Clearly becoming my favorite sailing channel. Fresh content and very entertaining! Way to go!
Matt...update you could also glue 1/4 - 3/8 plywood top and bottom, once laminated like that they won't split
Needless to say, cause it's to late now but I've got to pass this on to y ou Matt. Your doing so much with PVC which I totally agree with. I love the stuff. BIIT, you can put it together with PVC cement/glue. I dries fast and will not rust or oxize like nails or screws will. It's also water tight so shower water won't get through the joints and into the inside of your wall. Love your show.
Hey Matt and Kristen, whistle while we work oh we whistle while we were. I can just see you two now whistling away while you're working on your cruiser. About your bathroom, just black or black or black and stainless steel. Interesting you all doing those areas projects but look forward to you all sailing the seas. By the way when are you going to get your new diesel engine? Well take care and look forward to your next one. Bon voyage
Hay Matt you did a very good job, You two are so fun to see so keep it up ok? Capt. Bill here in Texas....
Hi you two always enjoy your jobs you do. I was a bit time poor, so i watched you at 1.5 speed, I have got to say it took you in to a whole other world and not a bad one. Love what you do and how you do it, the boat will be amazing when you finish. Cheers from Australia!
Your my #1 channel for making me laugh and have fun watching you both make hard work look easy. 👍😊🇨🇦
successfully used elastic cord (like Bungy cord) for retaining items on recessed shelving (2 tiered lower/upper) ... this allows for movement without risk of losing stuff in rough seas ... it also allows for easy access of maximum sized items ... and finally will accommodate oversized items ... simple to install ... simple to replace (rubber eventually wears out) ... our toy sail boat (23.5' trailerable) lives in Canada outside year-round ... typically have to replace these cords every 2 years ... did I mention this cord is cheap > $1/Yard
Matt, you will regret not using hearing protection when using power tools, especially the Skilsaw. You are doing a great job but please protect your hearing if you want to continue hearing the sound of the4 sea!!!!!This is meant with good will towards your future.
Carry on, you guys are just great !!!!
Today was a good day, I finally caught up to present day after watching all the episodes from the start. Best sitcom going! I worked construction for many years and Matt's comments about young engineers and OGs was spot on! Love the channel!
We have rain water collection tarps and a 3 gallon Solo457 bug sprayer with a sink pistol for freshwater showers. It shoots water just like a residential tap.
Add a gallon of boiling water and it makes a perfect warm water spray.
Betty - Boo, just doin' the do! Never wanted yo be so brash, but what she does for presentation is just priceless. My 3 adult age daughter's, my wife, just adore her. What a gem of a woman, what a darling. Warmest regards from Sydney and Ballina. MATE!!!
Instead of a galley rail in the shower niche a 3/4" Clear Acrylic Plexiglass Rod will contemporize hold your shampoo plus have strength to provide as a handle in rough seas
I have been super impressed with how innovative you are with the tools. Lacking a table saw, you have clamped down a framing square as a fence/guide. For using a circular saw and hand tools your projects come out amazingly square and flush etc. Nice job!!!
I like the drain hole in the new shower nook. You can play that one again!!
Rounding the edges of those steps will minimizer the bruises on Kristen's legs. Good plan!
I was thinking for accessorizing , as Kristen likes black, the Matt beater shirt look in a shower curtain with the GBU design would be awesome. Naturally that got me to thinking the fabrics and cushions in the salon should definitely be GBU logo embossed but maybe with some tropical parrot colors. Finally I just grabbed some beers and laid down till these ideas went away. Great work kids.
One step at a time!
Coming along nice 👍
Crome and black accents/ accessories
You know that PVC sheet glues really well with superglue. Also if you heat it with a hot air gun carefully , you can bend it to almost any shape. Im so glad your using this PVC sheet, make sense on a wet boat. Great job.