How To Clean A Pressure Washer Carburetor
Вставка
- Опубліковано 15 лют 2021
- On this video I will go over a carburetor from a small 6 hp Kohler Engine , I will show some important steps needed to clean the carburetor internal jets,
please watch the video and pause if necessary , if you have any questions leave on comment section hit the like and subscribe .
thanks for watching .
I'm on Instagram as @pressuretech1313. Install the app to follow my photos and videos. invitescon...
Awesome video straight to the point . PERFECT
Almost Identical to my Yamakoyo power washer thanks for making the video I wanted to see what I was up against well done 🙏
@@jimmysjamin1 thanks and subscribe
Dude, I just saved a few hundred dollars, I was on my way to home depot to get a new pw while watching this video.
Thank you.
I'm glad to help
Yes I charge $175
You just brought my pressure washer back to life. Started on second pull after cleaning carb. Awesome Video!
Subscribe
Awesome! Thanks to your video, I got my pressure washer up and running!!!
facebook.com/groups/1332197880562032/?ref=share
Good video. I was able to fix mine following your guide. I think next time I’ll add fuel stabilizer to the gas to keep it from gumming up in the carburetor.
Great video man! I'm gonna try it. Never fixed one before but let's try again!
thank you my pressure machine works now after cleaning
Super helpful video. Should save me a few bucks
Fixed my pressure washer. Thanks
You said if it takes an hour let it take an hour, ima take my time
facebook.com/groups/1332197880562032/?ref=share
Real good video. Liked it better while you were talking.
Thank you brother
Thanks man!
Damn man the thing started 1st after I did this no problem thanks man.
👌🏽
Wonderful! Thanks
Looks like my float is sticking even after cleaning. Will run then starts leaking gas out. New float?
Just inherited a basket case karcher with a Rato RV173 motor... It came with a new carb, so installed it set choke and it fired first pull, given it had sat for years.. not bad I thought, then I shut off choke. stalled immediately 😢, won't run without full choke..
New carb adjustment? But can't find anything on the carbs for rato.. also I'm not familiar with those carbs or small engine carbs, been many decades since I tinkered.. what is the machined channel on the engine side face of carb, sort of spiral and open down at lower end of carb.. was told that they are redundant, but why would the take time to machine it into the piece.... ?
I took the last pipe/ line out n then gas just spilt everywhere and wouldn't stop any help ?
I'm thinking about converting to hydrogen at least the first firings would clean it out.. could I use a match to the hydrogen or gasoline to burnt it out?
When I took the lock bolt on the governor. I didn't check if the pin was open clockwise or open counter clockwise😮. How do I know if I locked it in the correct setting
Good video. What do you think about a carb that the fuel dried out causing a shellac problem. Would soaking a few day in cleaner or using s9mething else to get it off or just getting another carb or power washer?
Yes soak it in carb cleaner you just be able to disassemble it easy
What stops the throttle from being wide open all the time I cleaned my carby but now when I let the choke off the throttle is wide open reving it's guts out
@@glenandrew6914 check the linkage also the governor might be bad
Dang I'm that good ? I will do another video on a honda gx390 soon , kinda same steps only adding more suggestions.
Can we just soak in the cleaner then poke the holes?
You can yes , when the fuel dries its easier with the pics ,
I can’t find the other videos where are they?
Look at my videos on profile
Joke
You know where I'm at ! Show up