This man and millions like him are the people that keep the wheels turning in his country. Major props to him. As 'humble' as his work may be, he is doing something more useful for society than most of the politicians that serve in my nations capitol.
This guy is toast. I used to own a body shop with a junkyard and I repaired radiators when I was in my mid 20's. I started going to radiator repair clinics and noticed all the old timers had various neurological tics, blinks and shakes. I had my lead tested and it was off the charts! I cut up my repair tank and had chelation therapy to get the lead out and later had my mercury fillings replaced with composite. I'm 74 now and still work long hours in my own small business with a great memory and am very healthy. Folks, don't breath lead, plastic and sulfuric acid fumes !!!
@@АндрейАндреев-с9б1щ I understand that and I wish I could help him and all those like him. My comment was a warning to those who could find another way to make enough to eat...
@@maxmaxwell4211 Not sure, maybe good to hemorrhoids too. Better ask a real doctor to confirm. To practice this position is good for your health in long run.
Notice that the number of plates removed from the battery is far higher than the number of plates he's putting back in and just uses padding on both ends of the stack of plates to take up the extra space... He's basically making a new battery, yes, but it's a new battery that's that's smaller in capacity than the original one would have been.
And maybe that's what people want to pay for. As long as it's not dishonest, then I have no problem with that. And obviously it has to be the same voltage - but I think that's what each section of the casing is for. When labor is essentially free, the economics change drastically.
@@zachansen8293 Yes, each section is a cell. One set of plates with a separator creates a cell, but putting more alternating plates in there creates more cells in parallel as well as with the adjacent plates. The left and the right hand tabs are essentially in parallel, electrically speaking. Six cells at 2 volts nominal each, and in series, results in the nominal 12V.
The number of plates he's putting back in is likely lower because he's already sorted out which anode and cathode plates are still salvageable and which were beyond repair or reuse. Not all of the plates are reusable. One may use plates from multiple batteries to get one single battery that's somewhat in good shape, using just the plates that are still in good shape.
@@AnnaVannieuwenhuyse You'd think you would just salvage some from other batteries to make a smaller number of good ones instead of making a bunch of worse ones. But maybe that's what demand is for.
There is a lot of craftsmanship involved because batteries are not designed to be refurbished. You have to intimately understand how it actually works and how it's manufactured in order to do something like this.
Never in my life have I seen or heard of a battery being rebuilt. Extremely toxic process involved there coming in contact with lead and burning plastic but the skill and innovation is fascinating. I take my hat off to this gentleman and anyone else around the world keeping the wheels turning in their society.
Last I heard -- although the info is YEARS out of date now, if not decades -- Bangladesh was the place to go for battery rebuilding. You wonder where your recycled Duracells and Die-Hards go? You're looking at it. Like it or not, this is what that core charge at Advance Auto buys you. Love it or hate it -- the companies that did it don't care. It was cheap for them and that's what they think matters. Welcome to the modern world. I'm not here to peddle a better way. I don't have one of those today. But this is the life of those who make possible the lives of those of us in the cushy parts of the world. This is how the other half lives... oh, and it's a lot more than half nowadays. By the way, if you want to know where your electronics go... that would be Guiyu, China, for the most part. Technically illegal for decades now... nobody cares. The boats will come as long as there are people still alive and willing to work. When you think about it, we live in a utopia. I live in America. For my specific county in my specific state, median income was a bit over $45k in 2020. The per capita income of Bangladesh as a country was the equivalent of $2227 for 2020. Both of those figures are in 2020 US Dollars; in 2022 US Dollars, that's almost $43k where I live and roughly $2383 in Bangladesh. Say what you want about the US government -- and there's plenty to say, wherever you lay on the political spectrum, let's be honest -- but most of our civil issues don't have to deal with things like minor municipalities not having any running water at all and thus every family in that entire village (we'd say small town) having to walk for multiple hours every day to get water -- the luxury of something like a bicycle, let alone any sort of motorized vehicle, being distinctly aspirational for most folks at that economic level -- and having kerosene fires routinely burning down their dwellings because that's how they heat, cook, and light the place; it's all they can get -- the electrical grid in most poorer countries is, let's face it, not the sturdiest even in the larger cities, and it simply doesn't exist outside of them. There's no money for that kind of infrastructure. This is how you get your Starbucks Shangri-La. This is the price of utopia. I wish I had better news to give you. I wish I had a happier answer to provide. I wish this story had a happier ending. Sadly, life is not a Disney movie... to paraphrase an actor , and character, far better than I -- welcome to the scrapyard of the real.
Aaaaaaaaaaaaaaaaand aaaaaaaaaall of thaaaaaaaaaaaaat chemical shait goes right there on the street... Would you say the same if that would be going in any western city right now??
@@marekzielinski3598 I do believe I agree, although I'd like to think I phrased things a bit more artfully. As an aside: UA-cam considers itself a family-friendly website, and as such language filters exist for a reason and comments tend to disappear which attempt to circumvent them. I won't be reporting your comment personally, as IMO if they're going to make it THAT easy it's not worth my bother, but I did want to leave you a heads-up as websites generally take these things a bit seriously, and Google (which owns UA-cam) does occasionally hand down bans if people get annoying enough. I'm told it's like being erased from the Internet. But this topic is heavy enough as it is, so on a happier note: I hope you have an unusually nice day, OK?
@@laserhawk64 Nothing i said in here is against google or YT policy. Also i do not understand what is your problem do begin with? My comment wasnt left for you at all. Do you know how the comment section works? You understand that i do not have to read the whole reply thread to leave my comment for the same person you did and you will see those as replies? And btw i didn`t so maybe you got the wrong impression here? Anyway since we got that( i hope) out of the way and since you directly commented i will add something on the side. When i was 10 my native countrys GDP per capita was 1,750 US so let me assure you i understand a struggle of a poor country where everything i mean everything that could be fixed have been fixed. You would not throw away nut a bolt or a screw... to damaged, sell for cash untill there was nothing left. So before you start another lesson mind what i just wrote above. Onto another topic then: Anyone who worked in any factory that is fixing anything knows how the world works, a lot of people know where the so called unusable by the west parts go. The problem is that nobody in the west wants to agree that this is happening otherwise our moral preaching about reducing emisions, waste and so on would collapse like a house of cards. Last but not least: Really? Reaaalllyyy? You are offended by the word "shit" You do know that word is considered by youtube as light profanity and is allowed in their videos but they will not get domenatized. You would have to stretch the ban definition hard to get me out for the use of it in way that is not directed at any person to begin with but at toxic mix of chermical material. You get offended on behalf of a toxic sludge? Also what you wrote - even though i fully understand and hope you did not meant like that - sounded like a vailed threat? For a person who wishes me a good day it does sound a little bit toxic ^^ Now then i with all honesty of my heart i actually do wish you a good day
@@marekzielinski3598 My, my, my... such a long diatribe for one single swear word with an extra letter in it to defeat the language filter. I think I understand the YT Comment section better than you :) One, you are reading far, FAR too much into things if you think I somehow believed your comment was replying to mine. I did not. Two, what is allowed in the videos is different from what's in the comments. Three, most of us in the West, particularly in America, tend to be a bit ignorant of stuff like this. I'm in an odd position, I've "fallen through the cracks" -- so to speak -- in my own country, abs I live in poverty now, but this is after getting a decent education and having experienced other cultures in other countries. I just never got the opportunity to do anything with what I had; as soon as I got it, my world fell apart and now I'm a very different person with a very different life. Four, I'm genuinely sorry to hear that you live in such a difficult country. Just because we live so well, doesn't mean you should not. Probably there should be some sort of middling-out... sad to say, enough of us are too comfy and it will never happen while countries like mine remain as they are, but perhaps someday... remember the phrase: "all things end". For better or worse, there are no exceptions. Five, I was not offended. More that you gave me a chuckle for something that seemed obviously out-of-place. Six, I genuinely meant my kind words... just as I mean them again now: have an awesome day, sir or miss.
В 90 е годы я в армейской аккумуляторе делал то же самое . Были и отливочные формы и все что надо..Правда пластмассовые АКБ мы не делали. А вот деревянные и фиберглассовые с заливкой мастикой ремонтировали на раз .И 6 СТЭМ 140м и 12 СТ ...и любые..
Хорошо когда зимы нет. У нас новый 3 года служит ,на 4год в минус 20 едва крутит ( хоть в тепле и показывает себя молодцом). Думаю такой восстановленный и недели зимы на Урале не выдержал бы. Хотя наблюдать очень интересно. Молодцы крутятся как могут
Have you had a battery smoke due to cold? It has been -10F (-20C ?) And the battery in my wife's Prado 120 smoked. I'm away from home and can't look at it
@@ezmony19 Children and adults can get lead poisoning by breathing or swallowing dust that contains lead. Once absorbed, it affects almost every organ and system in the body. Even a little lead can make children slower learners. Very high levels of lead exposure can cause coma, seizures and death.
@@Jesse_Johnson let's not pretend this car battery would pass any sort of quality control. he's skilled at what he does and it probably helps a lot of people get cheap truck batteries but don't make this more than it is.
@@TrueScandinavia I think the main point is not the quality of the battery, its the lead vapour this man will be inhaling for hours every day. This job will kill him, no ifs or buts, just a matter of time
The real art of repairing things. My deepest respect to this man. I lived in India for some time, love it dearly and adore its nice people. Great job done, a real JUGAAD at its best. Regards!
Actually, this is in Pakistan. You can tell from the dress style, urdu writing, phone numbers car license plates etc. Not that in India "informal" i.e. Not under pollution regulations, does not take place. There are large unauthorized recyclers, about a 1000, in India that smelt the lead at low cost because of hoodwinking of pollution standards, but the lead supply chain then goes into battery manufacturers plants. Once you have the lead, manufacturing can be done on a large scale with semiautomation with much better efficiency and low cost. Sitting on the sidewalk and poring melted lead by hand and plastic welding by lighting the plastic on fire is inefficient, although requiring high degree of skill and necessary when you don't have alternatives. Pakistani people show the same jugaad as Indian people, but most of the fruit of their sweat is skimmed off by the Army and extraordinarily corrupt polity, even by south asian standards.
Indian bro, if you have kept your political rhetoric aside in this video of entirely different genre. It would have been much better. Porus chan-nee can't accuse lota for a hole.
I have no clue why this ended up in my recommended feed, but the repurposing of the lead oxide sheets to stabilize the whole battery assembly is clearly genius!
Просвети в чем смысл манипуляций? На сколько я понимаю аккумулятор подыхает когда сыпется свинец с пластин он в оксид превращается. (чёт там не оксид а какая-то муть получается точно не помню). По сути надо плавить свинец восстанавливать его чистоту и формовать обратно на пластины, но так как в аккумуляторе высоко пористый свинец, процедура вообще смысла не имеет! Что он сделал то? Ну максимум поднял ток отдачи на какое-то время (ну так можно было просто промыть его и электролит поменять). Ну возможно чистый сепаратор уменьшит нагрев , ток утечки и снизит внутреннее сопротивление. Но на старых пластинах, на сколько этого эффекта? На 2 месяца? Что он делает то в итоге?
@@Staflain если приглядеться то видно что пластины из старого аккумулятора пошли в дело не все, т.к. положительные пластины высыпались при разборке (катод). Поэтому он собирает грубо говоря один аккумулято из двух.
@Nicola Domanin question is there no better facility than the middle of the road to do this work? A better shack with some ventilation? I get it the guy is poor with the low tech equipment and everything but this project is exposing some threat to the public.
He has a trade and his own business but his labor is so cheap that he can profit from the battery it took so much time, material, and fuel to refurbish. He has clients because the price of a new battery is too expensive for so many. I live in Thailand I've seen guys rewiring electric motors by hand. One thing, very little goes to waste unlike in more affluent countries. Thank you for the very informative video. I was well-edited and compelling to watch.
ничего необычного. это работа аккумуляторщика времён СССР, когда они были разборными и заливались битумной мастикой. можно было самим ремонтировать. в эбонитовых чёрных корпусах.
@@Дмитрийвасин-х3ъ с этим согласен. неизвестно кто будет собирать и какие пластины и электролит туда запихает. а так же старые сепараторы в целях экономии.
Делал такую работу в детстве когда летом во время школьных каникул работал в колхозе (мне тогда было 14 лет). Ничего сверхъестественное. Конечно тогда сами аккумуляторы небыли такие красивые, но было очень легко разбирать и собрать.
бесполезная работа. если свинцово кислотный аккум сел, больше нет смысла его восстанавливать, он больше не будет держать заряд. только первое время и всё!
I sometimes complain about my life and look at things like this and feel humbled and privileged for what I have although I don’t like my circumstances. I respect this man all the way.
I have learned so much from these resourceful and ingenious people. This task is fairly “low tech”, but they have taught me some amazing skills using the most basic tools and techniques, like one man who carved an RC airplane propeller by hand, which may not have been as efficient as a commercial prop, but it flew amazingly well.
У нас раньше немец ремонтировал батареи в совхозе. Уехал в Германию какая у тебя профессия аккумуляторщик . что это батареи ак делал . наин такой профессии не бывает это вредно для здоровья🇰🇿
Проблема в том ЧТО аккумулятор получается из ДВУХ неисправных на это уходят (кажись) минусовые пластины а поскольку обмазка минусовых пластин не такая как у плюсовых то и мощность аккумулятора почти в два раза ниже ЭТО знает любой аккумуляторщик.
Excellent work although I worry that all of this lead, acid and plastic fumes exposure is taking toll on this man's health. I hope he stays safe and healthy.
Besides the health concerns -- how good are the remanufactured batteries? I have somewhere in the back of my mind the idea that "dead" batteries are bad because both the anode and the cathode have changed into lead sulphate. What does it take to reverse that change?
You can't really reverse it. It's a chemical change. Soft of like burning wood and it turning into ash. All you can do really is scoop it out and replace it. It's really simple if it wasn't for all the lead.
many things in life are simple. But if you want to be done in safe way, that would make things complicated. Like pouring Acid from a water jug and boiling lead in a wok.
The hard part is inventing the first or improving the process of creating the tech. Once it's out, mechanics and those who service these things can usually repair the most advanced tech using pretty rudimentary tools.
Crazy amount of respect. Dude goes above and beyond to just have a bit more then survival and I love how he does it. The combed hair for presentability it’s important for what he’s trying to do and I love it and the fact he has to use jumper cable grips to hold it still to weld it’s crazy and mad props cause he’s making it work
You know what's amazing is imagine if this guy came to America there is no telling what he could do. These are the people that have to wait in line to become American citizens they can't sneak across the border like everyone else coming through our southern border. Well they could but they would have to fly to Mexico. These people are the immigrants we want. Not someone just to take up space and vote democrat!
@@joeybod68 you know the Democrats are the ones who came up with the skilled visa program and have pushed green cards for years, and it's the Republicans blocking poorer immigrants (eg: the Indian guy in the video) with crap like the " public charge" rules implemented by Trump, right? You know what Trump says though, "I love the poorly educated", he means you - low information voters.
This is really something to see. He makes it look so easy. Like he's already done hundreds of these. Fascinating. But I doubt I could do this on my own. Hats off to this man
@@titanium4167 yes death is a small price to pay. Give your head a shake. Money is not more important than someone's life. If that was the case we would still be using slaves.
Lead acid batteries are (ignoring the plastic housing and paper separators) basically 100% recyclable. Wish the same could be said for all battery technology.
@@phillyd2018 In terms of energy density, yes, but it's bad engineering to dismiss them solely on that. LiPo batteries cannot compete in terms of current output. Not only that but lead acid charge/discharge characteristics are very forgiving, they won't blink at a dead short. Also, Lead acid likes to be stored at 100% charge, meaning they are ready to go when you need them. Try that with LiPo and you'll be doing damage to them.
Respect to the man doing what he needs to do to provide for his family. You are what we need in this world to make it a better place. A man who work hard to make a honest living. A man who work hard to provide for his family. Such a honorable way to live. Salute to you !!! 🙌🏽🙌🏽🙌🏽
Cannot work hard when boss takes half your earnings for himself, how is that "honest" the man may work hard and be honest, but he lives under a dishonest system.
@@SMGJohn : sometimes those are cards that you are dealt with.. a smart man will learn the trade and go right across the street and open his shop. We all have to eat a crow in life .. if you have not so far .. You will In future
@@jayhaviv4286 In dream world where he gets paid enough to buy a building to open a shop or has enough money saved up to quit his current job to open his business maybe. But in real life you wont be able to unless you have someone bankrolling you while you start your business.
@@Brian-iz9sh : How do you think his boss open the shop. You rent the shop ( no need to buy a building ) over there you don’t need the whole store, like many business owners just rent a portion of a shop.
In the 1960s we did similar in the RAF. Fortunately I only helped with a few, so lead exposure was limited. I must say though I admire these hard working men. They do what they do to put food on the table.
This is absolutely insane, where would someone even learn to do that? On the side of the street of all places! Absolutely amazing what these people achieve and do considering how little they have to start.
@@AngelTorres-pm9yl I'm not going to argue but the pound is worth much more 🤷 Doesn't mean I can't respect his hussle on the side of the street literally rebuilding batteries. I'm also not talking shit about 3rd world countries, it's just a fact that they don't have the same resources open to them as us and they still achieve amazing things like this guy.
I have just seen a true craftsman at work in the most humble working environment, It brings me back to my young days working as a motor mechanic (as we were called then) when we would repair a lot of car and engine parts, but then we were overtaken by cheaper replacements. this man is saving a lot of plastic being dumped by reusing the battery shell. Enjoyed watching this thanks for sharing. Carl-UK👍
In the West, car batteries are made in a closed loop manufacturing process and almost all of a scrap battery, including the case, is re-used to make new batteries.
Nope..you're thinking from an American perspective. If your living day to day just surving, the value of people watching on the internet would mean nothing to you.
He thinks it’s just work but we see him saving the planet if he was living in a modern country he would probably get a government grant for a company to do that
Recycling isn’t the same as refurbishment. Just simply sorting bulk recyclable materials is a whole lot more complicated than people realize. And product impurities means not everything can be made from recycled waste
@@nadlug9199 the vast majority of “recycled” stuff just gets shipped to china & stuffed into a landfill & the American government is so generous with our money there’s millions in kickbacks leftover for those same politicians
Practically 100% of car/truck batteries get recycled. They’re a notable exception to the “ship it all to poor countries” of most recycling. In wealthy countries the recycling is performed very differently (via shredding and then separating the materials by flotation), but it’s done because a) the lead is so easy to recycle b) car batteries are expensive to ship because of their weight, and c) they’re not allowed in landfill or incinerators due to the lead.
Not amazing at all as it was mentioned this make huge harm to environmelt as all the servis and spill vill be washed to soil or river with first rain. Not mentioning danger for the person himself. And Im doubfull that acid and derbis washed from old battery is properly handled and destroyed. I understand its simply done because of needs but it is great example how it must not be done.
I have nothing but respect for people who, instead of throwing things in the land fill, refurbish them to use again and again. The pure ingenuity is wonderful.
Joel, why do you think there is a core charge on car batteries here in the USA? Its because we do exactly the same thing but using safe methods that wont kill you by the time you turn 30.
This battery wallah is tops. Every locale on this planet needs such innovative individuals to operate in this way. From boot makers to computer repairs. We all have to become local self sustaining communities. Great vid. 👍
What's wrong with recycling centers, and rebuilding new ones in facilities where employees don't have to be exposed to acids, heavy metals and dangerous fumes? I think you have it backwards. It's better for people to get out of poverty, than to admire how poverty makes ends meet. This is what people are trying to escape. He's not doing it because he's a craftsman, his wages are probably horrendous and he would take another better paying job if there were any.
@@bradleyakulov3618 those truck batteries go for $200 USD. Sell one, and you have a day's pay. Imagine having a full out shop that would do everything to repair a truck. You won't get rich, but you'll make a good living. Nobody sees what his home looks like.
@@danieljones317 Only, he's not the one who gets that $200 USD. He'll see $3.50 of that (cost of labor). Someone rich is getting richer, and it's the owner. Someone who's going to expose himself to poisons isn't the same person who's going to acquire materials and manufacture the molds and all that. In third world countries, there's no middle class. There's the ultra rich and there's the poor and that's it.
Great example of real recycling. I do hope though as his business picks up that he will look into and invest into some good safety gear and procedures. Dish gloves, as those appear to be, aren't rated for acid. I wonder how many chemical burns he's endured. Also, he works so close to the fumes of the job. It won't take long for metals and fumes to take their toll. Then there's the spilling of old battery contents on the ground, which over time will have a detrimental effect on the area. I applaud the guys ingenuity and expertise. I also feel bad for him and the surrounding area because of the long term toll doing things that way will take on him and others. We here in supposedly advanced countries have learned from the pain and suffering of others that safety requirements and standards are needed. It looks like he's an entrepreneur and not an employee, so if anybody knows him, maybe help him to find online the meds sheets for the chemicals and metals he's working with. It's wouldn't take much to get acid rated gloves and some sort of respiratory gear. Also, he may get some energy savings if he enclosed the burner with bricks. I would hate for us to applaud him and in not too long he starts to feel the effects of metal poisoning or have organ damage from absorbing toxic metals and chemicals over time.
Exactly what I was thinking. I was cringing very hard when he was cleaning the old battery waste and washing it with water on the ground. It must be disposed properly as it can slowly seep into ground reservoirs and potable drinking areas. I also applaud his work though. I would recommend wearing protective gear when he was soldering, especially considering lead fumes can have a serious detrimental effect to your health with respirated. I’m pretty sure this took place in Bangladesh or Pakistan so I am not familiar with their environmental laws.
@@benyseus6325 if anything we should export to the world, it should be safety standards. How many toxic sites have we had to clean up. How many preventable illnesses and deaths on the job have we seen. We've learned a lot of tough lessons and we really should be helping these countries to benefit themselves. I love to see such amazing talent and ingenuity and at the same time cringe at the thought of the long term impact. I saw a video a number of years ago out of Indea where men were fluffing Asbestos with something like rakes in nothing but their underwear. No breathing masks, no eye protection, no ventilation. By now, everyone in the video is most likely dead. In another, I saw videos of hits in shoes and shorts taking acetylene torches and cutting ships into pieces. One guy blowup because he started cutting a fuel tank that someone hadn't emptied and aired out.
My grandfather was a heavy machinery mechanic in Eastern Europe from the 60s on. These were routine procedures in Europe too when there was a scarcity of almost everything. Instead of the molten plastic they’d use molten asphalt as it’s easier to work with.
@@steelmetal8038 Странно, что вроде все цивилизованные страны хотят улучшить экологию, а один и самых сильных уронов по ней - аккумуляторы разных типов и я думал, что они реально не восстановимы, а оказывается, что вполне себе. И вот тут то и странно, зная технологию и изобретательность Европы и Америки, они так и не наладили восстановления АКБ, чтобы спасти природу, как-то не обычно, не находишь? Ну зато доллар по 150, хоть тут у них есть положительный результат, видимо ничто не остановит их от "добрых дел".
@@Евгений-м8м7е любой диэлектрик подойдёт, который имеет пористую структуру, чтобы пропускать электролит. В некоторых современных аккумах эти пластины заменены пластиковыми сетками.
I am Mexican and I can say a core value for us is hard work. My respect to this man and his skill. It would be cool if there were more manufacturing jobs like this in the US
@@hebedabber2770 Gone, gone, gone, the people running those manufacturing companies have the right to make more money in their pockets - even if it means that they decimate the purchasing power of their customers.
It's been politically expedient to play into the Green dream of a 3rd world United States. They and other groups have choked industries out of the US, but like choking water, those industries left for greener pastures elsewhere.
@@HiroNguy "Greener pastures" ie: third world countries that don't care about pollution as well as overworking and underpaying their employees (china, india, malaysia, etc.) Previous generations sold us out to the lowest bidder.
I served in Afghanistan in 2010 with the US military and was always blown away with the ingenuity of the people there. Very similar stalls could be found in Khost and Gardez where I served. Thank you for showing us these amazing people with amazing skills
This is how may father use to make batteries 20 years back, usually we use to prepare 2 batteries per day, nowdays very less peoples involved in preparation recondition Battery process, Happy to remember those days by seeing him. Thanks
Pure art at work. Gotta love this guy. I wish he gets a ton of money doing this by talent. Make a company somewhere, and sell the scrap to recyclers that can not be used abroad or domestic. Win Win all the way! Love it.
This video is from Pakistan. It is a country of small shopkeepers. Most importantly they don't allow giant companies to dominate all of the market which allows small businesses to furnish at fast pace.
Мужик, конечно умелец 80-го левела, но самое поразительное, что он работает с КИСЛОТОЙ в почти белом х/б наряде и без дыр !!! Интересно , а сколько они там живут, при такой работе и в таких условиях ???
He has neither dyed hair nor the average age is 45 here. This video is from Pakistan. Its a land of hardworking people :) average life is 60+. People generally like to stay happy here
Какой нах талант? Этот человек вынужден перерабатывать аккумуляторы, что бы на жизнь заработать. А работа опасная и трудоемкая очень трудоемкая. Талант бл
вот тока новым от этого акб не станет сульфаты не удаляются с пластин от слова никак, занят он таким так как новый акб который стоит 200- 300 бакса это у них оч дорого, а работы на день стоит копейки
It's nice to see this progress how it should work... But when I was in India, especially in Kalkutta, I saw many of those "shops" and it was just terrible. Nobody ever had any kind of protection like gloves... They worked bare handed and with bare feed in shops completely covered in lead and acid. Their arms and legs were black and corroded by the acid. Most of them were kids.... I already told a lot of people that this is what I remember of being the worst thing I have seen in all of India (and I have seen a lot of crazy shit over there). I hope they will improve general health conditions for those workers.
It's an environmental nightmare. He handles hazardous and toxic substances as if they were flour and sugar. There's nothing brilliant about it. Just looking at the end: That's sulfuric acid and not apple juice that he's spilling around with.
@@gokusan1015 come on...really...white privilege? Health, safety and environmental protection becoming a white privilege? People who are not white are just allowed to destroy the environment? Can't think of more?
How I wish we have such a handy people that will repair a solar batteries in Nigeria like this guy does. He could have help a lot and earn money. Greetings from Nigeria
Merci de cet vidéo c’est incroyable de voir des gens comme lui recycler du matériel comme cet batterie,Mise à part le manque de détails concernant les matériaux utilisés, comme les isolateurs de chaque côté des plaques
Much respect to this guy and admiration for his skill. There's absolutely no way he will escape the long-term health effects of lead poisoning, however. 😵💫
I was thinking exactly the same thing, really I can only imagine the hardships. At times he’s wearing just one glove. Also no respirator he’s definitely got high levels of lead in his blood.
@biyukia No, but he's certainly breathing it in(particularly when melting it), and touching it every day. I have no idea whether or not that's worse than all the traffic fumes he's breathing in from the street though.
When I was a kid growing up in Puerto Rico in the mid-80's there was a guy that used to this. You would take your no longer working battery to him, and he would open it up like this gentleman did and put it back to like new condition. It was cheaper than buying a new battery, that was for sure 🙂
Looking at what he did, he turned a 150Ah battery into a 85Ah battery, its a bit of a scam really. Better of buying new. Cannot doubt his work is good though.
@@fountainofspeech1379 Look carefully, the plates are slightly smaller than the originals and there are less of them. @7:01 Look how he packs both outer sides with a large amount of insulation rather than using lead plates. The battery results in less capacity because of the overall less surface area by using smaller & less amount lead plates & more insulation.
Great skill shown here, admist what sounds like a insane amount of noise. This is not for the unexperienced, lead is like asbestos, you have to respect it, wow the mix of acid, lead and plastic - don't try this at home, unless you know what you are doing. Thanks for the video, was very inforative as to what is inside a battery like this, you are braver tham me...
@@tinknal6449 nah, breathing in the lead vapors in is way worse. acid just is itchy in 1100~1300 grav like new batteries use. now if it's straight hot acid, it wouldn't last long in his container he used to pour, usually they get all soft and melty and he wouldn't dare burn up his hard work with that. the worst is the black sludge on the jars from off gassing its super concentrated and sticks like grease. that stuff tingles right away, the other stuff you notice like 30 to 40 mins later because it itches when you start to sweat.
I've spent a lot of time in the Philippines, you see a lot of the same ingenuity and resourcefullness there. When you're dirt poor nothing gets thrown away, everything can be reused somehow.
He doesn't give a hoot about any landfill. The return on selling that is a lot more than the material he put in and his time, as sad as that is. Pompous westerners man.
Я вообще не понимаю, зачем я смотрел это поздней ночью :) Странные алгоритмы Ютуба Удивляет, какое у них всё первобытное, на коленке. Правила безопасности просто посланы на**й :)
While a primitive approach doing it all by hand...they are getting the most out of their resources and keeping things out of the landfill as long as possible. Good job!
O trabalho é excelente, e entendo que ele está fazendo o melhor que pode, pena que as condições e os equipamentos sejam tão precários, com certeza manipular chumbo, ácido e outros materias tóxicos dessa forma acabaram combrando seu preço mais cedo ou tarde.
@Trash Tier Waifu These people that don't use chairs and tables stay supple and with a strong healthy back. It is the people in the west that sit on chairs all day that nearly all of them develop back pains. Their backs get weak and vulnerable. Ask any physio therapist, they know that this is true.
awesome, that was so cool to watch. I been wondering how people did that. He made all that look super easy. would be so hard not to spill more everywhere. Super Steady and patient hands he has.
@@jonrymer316 So you know better? What he is doing is heaps better than the Western World idea of recycling, making lower value items from the scrap material.
Хорошая работа, дарить людям маленькое счастье, к сожалению нам не дано предугадать сколько нам отпущено в этой жизни, данная Страна может гордится такими людьми
...в 90-х на военных ЗИЛах, Уралах и пр., во всех автопарках страны с нашими СТ90, СТ120 мы тоже таким занимались, можешь нами гордится...нищета рождает героев, сделать что-то когда нет ничего - подвиг...:)
This man is amazing! He's a tech artist!! I hope somehow he gets protective gear so lead does not end up killing him. Well, lead, other heavy metals and the chemicals, along with the fumes from the melted plastic. Over here no one wants to work if not havving a table, chair and proper tools. This guy is sitting in the street, using the pavement as his table. Awesome!! What a dexterity.
Very interesting to see this done. One slight slip could be catastrophic since he has almost no protective equipment. The toxic fumes are ridiculous. I hope he survives and moves into a healthier career,
Un genio!!! El trabajo que realizó en las condiciones que lo hizo, es para sacarse el sombrero, lo que podría llegar a hacer éste hombre si tuviera mejores condiciones para trabajar!!!! Felicitaciones Máster!!!!!
Lo mas peligroso y contaminante que he visto este día, no solo para el sino para el suelo, los animales y las personas a su alrededor, me imagino que es desgraciadamente la única forma que tiene de ganarse la vida.
Yo valoré la capacidad de la persona, lamentablemente lo que dicen también es cierto, está expuesto a todo y el daño al medio ambiente es terrible, pero tal vez ni si quiera esté al tanto de lo que hace, valla uno a saber
@@Djoni139 ...живя в загазованном забитом автопробками городе, потребляя еду непонятно из чего сделанную, запивая ее раствором ортофосфорной кислоты с кофе и сахаром, ты правда считаешь свой окружающий мир чище и здоровее...:)
beautiful, i've learned something useful here, thank you, i was having battery construction questions arising from getting the most life out of my batteries and this helped a lot.
This guy is an old world master craftsmen...he is so talented..oh my God !!!!....this world needs many many more like him..he is the battery God!!!! I'll bet his talents don't end there!!!!
لا توجد معدات معقدة وبامكانيات بسيطة اوجد لنفسة عمل يحتاجة الكثسرون تحياتى لك اينما كنت واتمنى ان يكون لنا ملايين نت هذة المشروعات الصغيرة والوظائف ..شكرا لك لعرض الفكرة وارجوا ان يحذو مثلك الك الكثير لتحطيم الاسعار وعرض البديل لمنتجات المصانع المبالغ فى اسعارها ...
This man and millions like him are the people that keep the wheels turning in his country. Major props to him. As 'humble' as his work may be, he is doing something more useful for society than most of the politicians that serve in my nations capitol.
I'm agree with you
totally agree with you, politicians are useless bloodsuckers !!!
this guy is a hero
Даже я согласен, политики у вас ужас
👍
He does more than the Aussie politicians also 👍👍👍🤣🤣✊✊✊
This guy is toast. I used to own a body shop with a junkyard and I repaired radiators when I was in my mid 20's. I started going to radiator repair clinics and noticed all the old timers had various neurological tics, blinks and shakes. I had my lead tested and it was off the charts! I cut up my repair tank and had chelation therapy to get the lead out and later had my mercury fillings replaced with composite. I'm 74 now and still work long hours in my own small business with a great memory and am very healthy. Folks, don't breath lead, plastic and sulfuric acid fumes !!!
Thank you for this important message. I cringed as i watched this poor guy's hard work. It takes so little lead to damage us.
Also " Safety Glasses / goggles " needed with hot lead & sulfuric acid ,, plus controlled ventilation...
Он это так делает не от хорошей жизни. Ему есть нужно. У него да же стула нет. Работает вдоль дороги.
@@АндрейАндреев-с9б1щ I understand that and I wish I could help him and all those like him. My comment was a warning to those who could find another way to make enough to eat...
Does anyone remember the phrase, "Mad as a hatter"? People used to make hats using mercury, which also causes neurological disorders.
I work for a battery manufacturing and distribution company here in the UK ..
This is some serious skill ...
Great content
Lauda uk mein kam karta hein tu
Ola uber
@@maxfactor4209 This way they can more relaxed and lerr stress on their back. need more practice to understand what I mean
@@maxmaxwell4211 Not sure, maybe good to hemorrhoids too. Better ask a real doctor to confirm. To practice this position is good for your health in long run.
Yo también trabajo en una maquiladora de baterias plomo ácido, usan las máquinas de TBS engineering?
Notice that the number of plates removed from the battery is far higher than the number of plates he's putting back in and just uses padding on both ends of the stack of plates to take up the extra space...
He's basically making a new battery, yes, but it's a new battery that's that's smaller in capacity than the original one would have been.
And maybe that's what people want to pay for. As long as it's not dishonest, then I have no problem with that. And obviously it has to be the same voltage - but I think that's what each section of the casing is for.
When labor is essentially free, the economics change drastically.
@@zachansen8293 Yes, each section is a cell. One set of plates with a separator creates a cell, but putting more alternating plates in there creates more cells in parallel as well as with the adjacent plates. The left and the right hand tabs are essentially in parallel, electrically speaking. Six cells at 2 volts nominal each, and in series, results in the nominal 12V.
The number of plates he's putting back in is likely lower because he's already sorted out which anode and cathode plates are still salvageable and which were beyond repair or reuse. Not all of the plates are reusable. One may use plates from multiple batteries to get one single battery that's somewhat in good shape, using just the plates that are still in good shape.
@@AnnaVannieuwenhuyse You'd think you would just salvage some from other batteries to make a smaller number of good ones instead of making a bunch of worse ones. But maybe that's what demand is for.
@@AnnaVannieuwenhuyse. Eleven to eight plates.
I never realised there could be so much craftsmanship in refurbishing batteries! Very interesting to watch
Yes this is far from my interests but it was really fun to watch
Indeed
@@Kr00zA This is Pakistan
And I never realized that in this country, you don't need education to do all kinds of shit Lmao
There is a lot of craftsmanship involved because batteries are not designed to be refurbished. You have to intimately understand how it actually works and how it's manufactured in order to do something like this.
Never in my life have I seen or heard of a battery being rebuilt. Extremely toxic process involved there coming in contact with lead and burning plastic but the skill and innovation is fascinating. I take my hat off to this gentleman and anyone else around the world keeping the wheels turning in their society.
Last I heard -- although the info is YEARS out of date now, if not decades -- Bangladesh was the place to go for battery rebuilding. You wonder where your recycled Duracells and Die-Hards go? You're looking at it. Like it or not, this is what that core charge at Advance Auto buys you. Love it or hate it -- the companies that did it don't care. It was cheap for them and that's what they think matters.
Welcome to the modern world. I'm not here to peddle a better way. I don't have one of those today. But this is the life of those who make possible the lives of those of us in the cushy parts of the world. This is how the other half lives... oh, and it's a lot more than half nowadays. By the way, if you want to know where your electronics go... that would be Guiyu, China, for the most part. Technically illegal for decades now... nobody cares. The boats will come as long as there are people still alive and willing to work.
When you think about it, we live in a utopia. I live in America. For my specific county in my specific state, median income was a bit over $45k in 2020. The per capita income of Bangladesh as a country was the equivalent of $2227 for 2020. Both of those figures are in 2020 US Dollars; in 2022 US Dollars, that's almost $43k where I live and roughly $2383 in Bangladesh. Say what you want about the US government -- and there's plenty to say, wherever you lay on the political spectrum, let's be honest -- but most of our civil issues don't have to deal with things like minor municipalities not having any running water at all and thus every family in that entire village (we'd say small town) having to walk for multiple hours every day to get water -- the luxury of something like a bicycle, let alone any sort of motorized vehicle, being distinctly aspirational for most folks at that economic level -- and having kerosene fires routinely burning down their dwellings because that's how they heat, cook, and light the place; it's all they can get -- the electrical grid in most poorer countries is, let's face it, not the sturdiest even in the larger cities, and it simply doesn't exist outside of them. There's no money for that kind of infrastructure.
This is how you get your Starbucks Shangri-La. This is the price of utopia.
I wish I had better news to give you. I wish I had a happier answer to provide. I wish this story had a happier ending. Sadly, life is not a Disney movie... to paraphrase an actor , and character, far better than I -- welcome to the scrapyard of the real.
Aaaaaaaaaaaaaaaaand aaaaaaaaaall of thaaaaaaaaaaaaat chemical shait goes right there on the street... Would you say the same if that would be going in any western city right now??
@@marekzielinski3598 I do believe I agree, although I'd like to think I phrased things a bit more artfully.
As an aside: UA-cam considers itself a family-friendly website, and as such language filters exist for a reason and comments tend to disappear which attempt to circumvent them. I won't be reporting your comment personally, as IMO if they're going to make it THAT easy it's not worth my bother, but I did want to leave you a heads-up as websites generally take these things a bit seriously, and Google (which owns UA-cam) does occasionally hand down bans if people get annoying enough. I'm told it's like being erased from the Internet.
But this topic is heavy enough as it is, so on a happier note: I hope you have an unusually nice day, OK?
@@laserhawk64 Nothing i said in here is against google or YT policy. Also i do not understand what is your problem do begin with? My comment wasnt left for you at all. Do you know how the comment section works? You understand that i do not have to read the whole reply thread to leave my comment for the same person you did and you will see those as replies? And btw i didn`t so maybe you got the wrong impression here? Anyway since we got that( i hope) out of the way and since you directly commented i will add something on the side. When i was 10 my native countrys GDP per capita was 1,750
US so let me assure you i understand a struggle of a poor country where everything i mean everything that could be fixed have been fixed. You would not throw away nut a bolt or a screw... to damaged, sell for cash untill there was nothing left. So before you start another lesson mind what i just wrote above.
Onto another topic then:
Anyone who worked in any factory that is fixing anything knows how the world works, a lot of people know where the so called unusable by the west parts go. The problem is that nobody in the west wants to agree that this is happening otherwise our moral preaching about reducing emisions, waste and so on would collapse like a house of cards.
Last but not least:
Really? Reaaalllyyy? You are offended by the word "shit" You do know that word is considered by youtube as light profanity and is allowed in their videos but they will not get domenatized. You would have to stretch the ban definition hard to get me out for the use of it in way that is not directed at any person to begin with but at toxic mix of chermical material. You get offended on behalf of a toxic sludge?
Also what you wrote - even though i fully understand and hope you did not meant like that - sounded like a vailed threat?
For a person who wishes me a good day it does sound a little bit toxic ^^
Now then i with all honesty of my heart i actually do wish you a good day
@@marekzielinski3598 My, my, my... such a long diatribe for one single swear word with an extra letter in it to defeat the language filter. I think I understand the YT Comment section better than you :)
One, you are reading far, FAR too much into things if you think I somehow believed your comment was replying to mine. I did not.
Two, what is allowed in the videos is different from what's in the comments.
Three, most of us in the West, particularly in America, tend to be a bit ignorant of stuff like this. I'm in an odd position, I've "fallen through the cracks" -- so to speak -- in my own country, abs I live in poverty now, but this is after getting a decent education and having experienced other cultures in other countries. I just never got the opportunity to do anything with what I had; as soon as I got it, my world fell apart and now I'm a very different person with a very different life.
Four, I'm genuinely sorry to hear that you live in such a difficult country. Just because we live so well, doesn't mean you should not. Probably there should be some sort of middling-out... sad to say, enough of us are too comfy and it will never happen while countries like mine remain as they are, but perhaps someday... remember the phrase: "all things end". For better or worse, there are no exceptions.
Five, I was not offended. More that you gave me a chuckle for something that seemed obviously out-of-place.
Six, I genuinely meant my kind words... just as I mean them again now: have an awesome day, sir or miss.
В 90 е годы я в армейской аккумуляторе делал то же самое .
Были и отливочные формы и все что надо..Правда пластмассовые АКБ мы не делали. А вот деревянные и фиберглассовые с заливкой мастикой ремонтировали на раз .И 6 СТЭМ 140м и 12 СТ ...и любые..
А чем вы заменяли разложившиеся свинцовые пластины, в этом ролике тоже не показали?
@@ИванИванов-о6ю7е Он просто набирает с других АКБ комплект.
Чувак явно занизил ёмкость АКБ, т.к. пластин стало меньше, чем было изначально.
@@АндрейКарпов-н7гну теперь понял, спасибо.
Между свинцовыми пластинами белый пластик ?
Хорошо когда зимы нет. У нас новый 3 года служит ,на 4год в минус 20 едва крутит ( хоть в тепле и показывает себя молодцом). Думаю такой восстановленный и недели зимы на Урале не выдержал бы. Хотя наблюдать очень интересно. Молодцы крутятся как могут
У меня Бош. Восемь лет уже пользуюсь, всё нормально. Живу на Урале. От производителя зависит.
туда бы еще навозу от священной коровы )))
Курский, 7-я зима, полёт нормальный.
Have you had a battery smoke due to cold? It has been -10F (-20C ?) And the battery in my wife's Prado 120 smoked. I'm away from home and can't look at it
@@romanat4358Брехня, сам из Курска. Знаю. До 2012 такие были. Сейчас 3 года, потом лучше заменить перед зимой.
This man is not just focused on outcome of that battery, but he maintains finishing of product too. Genius
And he is using gloves!!
I
I
@Get on the cross and don’t look back Booooo
Love the fact the materials are being reused. This man has serious skills. Love it
I worry about the lead contamination he might get.
Stay safe !
If you never know about lead. Lead can’t kill you.
@@ezmony19 Children and adults can get lead poisoning by breathing or swallowing dust that contains lead. Once absorbed, it affects almost every organ and system in the body. Even a little lead can make children slower learners. Very high levels of lead exposure can cause coma, seizures and death.
Yeah lead fumes are extremely dangerous
@@ezmony19 how can you be so confident to tell someone that they're wrong when you dont even know what you're talking about
@@apolloxlix679 He was just being humorous making a joke.
The two things I love most about this vid?
My man's soldering technique, and the fact that he does it all with pink dish gloves 😎
Only one glove needed on the left hand for most of the work! 🤣
He isnt your man
He's not your man pal
@@C54rlo he's not your pal, buddy
@@samfish90212 I'm not you buddy, lad
Incredible skill set here, but sadly I think he's ingesting a lot of lead here. He will be lucky to live past 30
Are you blind ? The man looks to be 40 ish. And in good health . But you are correct about his skill level .
He just turned 19.
@@chrissuave92😂
@@chrissuave92one day he’ll be 20…. Maybe 🤣
He’s 49 already
Вот, индусы, удивительные люди. Сколько уже роликов пересмотрел, восстановят всё, что душе угодно! Так держать, молодцы!!!
Сам ты индус это пакистанцы
Везде показывают свою работу
В СССР в семидесятые должность была аккумуляторщик и акб были разборые.
@@ибнАдамправоверный слушай неуч, пакистанцы это и есть индусы, только мусульманский веры
@@ибнАдамправоверный kkojom ok I'm my pp lol
No olkj
@@ибнАдамправоверный of
If we overlook the safety precautions, this work is amazing! That man is skilled and he works hard.
Good you decided to overlook the safety precautions….
@@Jesse_Johnson they said precautions not regulations
@@Jesse_Johnson let's not pretend this car battery would pass any sort of quality control. he's skilled at what he does and it probably helps a lot of people get cheap truck batteries but don't make this more than it is.
@@Jesse_Johnson I guess you have a bad day or something?
@@TrueScandinavia I think the main point is not the quality of the battery, its the lead vapour this man will be inhaling for hours every day. This job will kill him, no ifs or buts, just a matter of time
The real art of repairing things. My deepest respect to this man. I lived in India for some time, love it dearly and adore its nice people. Great job done, a real JUGAAD at its best. Regards!
Actually, this is in Pakistan. You can tell from the dress style, urdu writing, phone numbers car license plates etc. Not that in India "informal" i.e. Not under pollution regulations, does not take place. There are large unauthorized recyclers, about a 1000, in India that smelt the lead at low cost because of hoodwinking of pollution standards, but the lead supply chain then goes into battery manufacturers plants. Once you have the lead, manufacturing can be done on a large scale with semiautomation with much better efficiency and low cost. Sitting on the sidewalk and poring melted lead by hand and plastic welding by lighting the plastic on fire is inefficient, although requiring high degree of skill and necessary when you don't have alternatives. Pakistani people show the same jugaad as Indian people, but most of the fruit of their sweat is skimmed off by the Army and extraordinarily corrupt polity, even by south asian standards.
Pakistan
Indian bro, if you have kept your political rhetoric aside in this video of entirely different genre. It would have been much better. Porus chan-nee can't accuse lota for a hole.
Считай что на коленке смастерил то,что делает целое производство.Вот что значит-светлая голова у человека и руки из нужного места.
Супер!❤
Ну не совсем он и смастерил как целое производство. Он просто восстановил, разобрал и переупаковал
I have no clue why this ended up in my recommended feed, but the repurposing of the lead oxide sheets to stabilize the whole battery assembly is clearly genius!
Просвети в чем смысл манипуляций? На сколько я понимаю аккумулятор подыхает когда сыпется свинец с пластин он в оксид превращается. (чёт там не оксид а какая-то муть получается точно не помню). По сути надо плавить свинец восстанавливать его чистоту и формовать обратно на пластины, но так как в аккумуляторе высоко пористый свинец, процедура вообще смысла не имеет! Что он сделал то? Ну максимум поднял ток отдачи на какое-то время (ну так можно было просто промыть его и электролит поменять). Ну возможно чистый сепаратор уменьшит нагрев , ток утечки и снизит внутреннее сопротивление. Но на старых пластинах, на сколько этого эффекта? На 2 месяца? Что он делает то в итоге?
@@Staflain ну чтобы поменять электролит, надо все выпотрошить. Там все высохшее, нечего проводить.
@@Staflain если приглядеться то видно что пластины из старого аккумулятора пошли в дело не все, т.к. положительные пластины высыпались при разборке (катод). Поэтому он собирает грубо говоря один аккумулято из двух.
Lead dioxide.
Hazardous work, but I can't help admiring how he manufactures these parts so well
The new guy wares gloves.
@@andrewsparks4112 lmfao
@@andrewsparks4112 Yeah gloves stop toxic fumes from giving him cancer lmao
@Nicola Domanin question is there no better facility than the middle of the road to do this work? A better shack with some ventilation? I get it the guy is poor with the low tech equipment and everything but this project is exposing some threat to the public.
LOL
He has a trade and his own business but his labor is so cheap that he can profit from the battery it took so much time, material, and fuel to refurbish. He has clients because the price of a new battery is too expensive for so many. I live in Thailand I've seen guys rewiring electric motors by hand. One thing, very little goes to waste unlike in more affluent countries. Thank you for the very informative video. I was well-edited and compelling to watch.
In Germany swapping a part is always cheaper as restoring it because the parts come from China where labor is 1/100 of labor costs in Germany.
I could watch these guys all day long. AMAZING. SO TALENTED. 👍👍👍
Как же мы привыкли к роскоши и разучились работать руками и головой...
Молодцы мужики!
Ну каг бэ вы бы что выбрали, сдать аккум в лом и доплатить 7 тыс и купить новый, или отдать на ремонт и из говна получить говно за 3000?
ничего необычного. это работа аккумуляторщика времён СССР, когда они были разборными и заливались битумной мастикой. можно было самим ремонтировать. в эбонитовых чёрных корпусах.
@@Дмитрийвасин-х3ъ с этим согласен. неизвестно кто будет собирать и какие пластины и электролит туда запихает. а так же старые сепараторы в целях экономии.
Я к роскоши не привык это Абрамович привык
@@ВЛАДИМИРКузьмин-ь1х держи всех в курсе. Это конечно же всем интересно)
Что не сделаешь чтобы прокормить семью, ради куска хлеба. Здоровья этому трудолюбивому человеку !!👏👏👏✊✊✊
Делал такую работу в детстве когда летом во время школьных каникул работал в колхозе (мне тогда было 14 лет).
Ничего сверхъестественное. Конечно тогда сами аккумуляторы небыли такие красивые, но было очень легко разбирать и собрать.
Слава Украине!
бесполезная работа. если свинцово кислотный аккум сел, больше нет смысла его восстанавливать, он больше не будет держать заряд. только первое время и всё!
@@πςέ-ω5η Вы аккумуляторщик?
@@πςέ-ω5η в детстве мы старые пластины меняли на новые и аккумуляторы опять работали как новые (4 - 6 лет).
I sometimes complain about my life and look at things like this and feel humbled and privileged for what I have although I don’t like my circumstances. I respect this man all the way.
I have learned so much from these resourceful and ingenious people. This task is fairly “low tech”, but they have taught me some amazing skills using the most basic tools and techniques, like one man who carved an RC airplane propeller by hand, which may not have been as efficient as a commercial prop, but it flew amazingly well.
Просто на улице. Человек- фабрика, 🏭 не торопясь, без суеты и оглядки, криков и многословия...... Браво!!!!! 👍👏👏
У нас раньше немец ремонтировал батареи в совхозе. Уехал в Германию какая у тебя профессия аккумуляторщик . что это батареи ак делал . наин такой профессии не бывает это вредно для здоровья🇰🇿
они выживут и на марсе потресаюше.
Проблема в том ЧТО аккумулятор получается из ДВУХ неисправных на это уходят (кажись) минусовые пластины а поскольку обмазка минусовых пластин не такая как у плюсовых то и мощность аккумулятора почти в два раза ниже ЭТО знает любой аккумуляторщик.
Скоро в рФии
Это так пойдет, но стартер тянуть не будет......
What a skill, hard labour, humble and productive existence!
My hat is off to him 🙏
Excellent work although I worry that all of this lead, acid and plastic fumes exposure is taking toll on this man's health. I hope he stays safe and healthy.
They are and sadly he won't. He has already been exposed to much. In time it will all come home to roost.
He's not doing bad for 74 years old
U should pay his bills
@@PIS187 right
Mix all of that with the exhaust he's straight inhaling at face level by all of that passing traffic and I feel for the guy.
Besides the health concerns -- how good are the remanufactured batteries? I have somewhere in the back of my mind the idea that "dead" batteries are bad because both the anode and the cathode have changed into lead sulphate. What does it take to reverse that change?
You can't really reverse it. It's a chemical change. Soft of like burning wood and it turning into ash. All you can do really is scoop it out and replace it. It's really simple if it wasn't for all the lead.
Someone put a lot of thought into how to recondition those batteries, amazing what can be achieved with basic tools and a skilled hand and mind....
many things in life are simple. But if you want to be done in safe way, that would make things complicated. Like pouring Acid from a water jug and boiling lead in a wok.
The hard part is inventing the first or improving the process of creating the tech.
Once it's out, mechanics and those who service these things can usually repair the most advanced tech using pretty rudimentary tools.
Crazy amount of respect. Dude goes above and beyond to just have a bit more then survival and I love how he does it. The combed hair for presentability it’s important for what he’s trying to do and I love it and the fact he has to use jumper cable grips to hold it still to weld it’s crazy and mad props cause he’s making it work
God, without any eye protection too... and just Marigolds (Gloves)
You know what's amazing is imagine if this guy came to America there is no telling what he could do. These are the people that have to wait in line to become American citizens they can't sneak across the border like everyone else coming through our southern border. Well they could but they would have to fly to Mexico. These people are the immigrants we want. Not someone just to take up space and vote democrat!
@@joeybod68 the immigrants already doing most of the basic work for lazy americans xd.
LOL
@@joeybod68 you know the Democrats are the ones who came up with the skilled visa program and have pushed green cards for years, and it's the Republicans blocking poorer immigrants (eg: the Indian guy in the video) with crap like the " public charge" rules implemented by Trump, right?
You know what Trump says though, "I love the poorly educated", he means you - low information voters.
This is really something to see. He makes it look so easy. Like he's already done hundreds of these. Fascinating. But I doubt I could do this on my own. Hats off to this man
Probably thousands
@@Letsgobrandon827 Yea he probably does a hundred a week
He's also going to die from lead poisoning and cancer.
@@Bismuth00 small price to pay for the millions of dollars saved by his developing country thanks to him and people like him.
@@titanium4167 yes death is a small price to pay. Give your head a shake.
Money is not more important than someone's life. If that was the case we would still be using slaves.
This is not restoration. This is making a new one. Genius of a man. You gotta do what you gotta do to survive
Lead acid batteries are (ignoring the plastic housing and paper separators) basically 100% recyclable. Wish the same could be said for all battery technology.
Lead acid is inferior to lithium ion. Can't even compare
@@phillyd2018 the only place they lose out is upfront costs and, as demonstrated above, user serviceability :)
@@phillyd2018 So why don't we use Li-Ion in cars and just everywhere? Because Li-Ion has pros and cons about it. Same as Ni-Cd batteries.
@@CitarNosis317 li-ion has less cranking amps I think mainly.
@@phillyd2018 In terms of energy density, yes, but it's bad engineering to dismiss them solely on that. LiPo batteries cannot compete in terms of current output. Not only that but lead acid charge/discharge characteristics are very forgiving, they won't blink at a dead short. Also, Lead acid likes to be stored at 100% charge, meaning they are ready to go when you need them. Try that with LiPo and you'll be doing damage to them.
Respect to the man doing what he needs to do to provide for his family. You are what we need in this world to make it a better place. A man who work hard to make a honest living. A man who work hard to provide for his family. Such a honorable way to live. Salute to you !!! 🙌🏽🙌🏽🙌🏽
Cannot work hard when boss takes half your earnings for himself, how is that "honest" the man may work hard and be honest, but he lives under a dishonest system.
@@SMGJohn : sometimes those are cards that you are dealt with.. a smart man will learn the trade and go right across the street and open his shop. We all have to eat a crow in life .. if you have not so far .. You will In future
@@jayhaviv4286 In dream world where he gets paid enough to buy a building to open a shop or has enough money saved up to quit his current job to open his business maybe. But in real life you wont be able to unless you have someone bankrolling you while you start your business.
@@Brian-iz9sh : How do you think his boss open the shop. You rent the shop ( no need to buy a building ) over there you don’t need the whole store, like many business owners just rent a portion of a shop.
LOL
Seriously, he IS amazing (as well other workers who refurbish, repair or restore nearly everything).
Amazing he hasn't lost his vision with no safety glasses:D
In the 1960s we did similar in the RAF. Fortunately I only helped with a few, so lead exposure was limited. I must say though I admire these hard working men. They do what they do to put food on the table.
Can you explain? I know he used lead to make the connection, but what liquid did he pour at the end please
@@mastopage3120 Sulphuric acid
@@mastopage3120sulfuric acid
@@mastopage3120 Liquid is battery electrolyte. Basically water + sulfuric acid.
@@shaft3r1 Thank you.
This is absolutely insane, where would someone even learn to do that? On the side of the street of all places! Absolutely amazing what these people achieve and do considering how little they have to start.
He worked at the battery factory down the street
@@AngelTorres-pm9yl who are you responding to?
@@AngelTorres-pm9yl I'm not going to argue but the pound is worth much more 🤷 Doesn't mean I can't respect his hussle on the side of the street literally rebuilding batteries. I'm also not talking shit about 3rd world countries, it's just a fact that they don't have the same resources open to them as us and they still achieve amazing things like this guy.
@@AngelTorres-pm9yl cope
@@AngelTorres-pm9yl He's not wealthier than me, and I work far harder in my life than he does. Not everyone is lazy like you.
With the exposure to lead, acid and exhaust fumes, this man will not get old...
Probably die before getting old
Dermatologists hate him! Find out how this man stays young with this one simple trick.
@@ulisesr614 Death.
Sadly but either this or starve to death.
You sound like the system already shove it up your rear end 😉
Неожиданно, гениально.
Человек понимает технологию.
На коленке реабелитировал.
Like a Bos :)
Что понимает? Что реабилитировал? Не будет он работать!
Спасибо за ваш труд и низкий вам поклон, представляете сколько он тратит здоровья , делая эти аккумуляторы, без маски.
I have just seen a true craftsman at work in the most humble working environment, It brings me back to my young days working as a motor mechanic (as we were called then) when we would repair a lot of car and engine parts, but then we were overtaken by cheaper replacements. this man is saving a lot of plastic being dumped by reusing the battery shell. Enjoyed watching this thanks for sharing. Carl-UK👍
He's also saving the atmosphere from most of the pollution generated by melting the plastic and metal by using his lungs to filter it out.
In the West, car batteries are made in a closed loop manufacturing process and almost all of a scrap battery, including the case, is re-used to make new batteries.
He ain't saving anything. Look at this mess, lead everywhere--this would be a hazmat site after a few years in the West.
@@TruckingVideos That‘s true although this also means it’s a closed profit loop.
Dude, why do you think there is a core charge on all car batteries here in the USA? Its because we do the same thing just using safer methods.
I think this guy would be amazed to know his work is being viewed worldwide on UA-cam.
Nope..you're thinking from an American perspective. If your living day to day just surving, the value of people watching on the internet would mean nothing to you.
He thinks it’s just work but we see him saving the planet if he was living in a modern country he would probably get a government grant for a company to do that
It is a pity the filmmaker is earning much more money than the starring.
@@sko1beer He lives in a modern country. lol
@@zereimu sure he does them roads and shops are cutting edge
A lot of us talk about recycling, but he's actually on the front lines, DOING it - absolutely amazing!
You would be doing it too if it was your means to your income.
Recycling isn’t the same as refurbishment.
Just simply sorting bulk recyclable materials is a whole lot more complicated than people realize. And product impurities means not everything can be made from recycled waste
@@nadlug9199 the vast majority of “recycled” stuff just gets shipped to china & stuffed into a landfill & the American government is so generous with our money there’s millions in kickbacks leftover for those same politicians
Practically 100% of car/truck batteries get recycled. They’re a notable exception to the “ship it all to poor countries” of most recycling. In wealthy countries the recycling is performed very differently (via shredding and then separating the materials by flotation), but it’s done because a) the lead is so easy to recycle b) car batteries are expensive to ship because of their weight, and c) they’re not allowed in landfill or incinerators due to the lead.
Not amazing at all as it was mentioned this make huge harm to environmelt as all the servis and spill vill be washed to soil or river with first rain. Not mentioning danger for the person himself. And Im doubfull that acid and derbis washed from old battery is properly handled and destroyed. I understand its simply done because of needs but it is great example how it must not be done.
I have nothing but respect for people who, instead of throwing things in the land fill, refurbish them to use again and again. The pure ingenuity is wonderful.
Joel, why do you think there is a core charge on car batteries here in the USA? Its because we do exactly the same thing but using safe methods that wont kill you by the time you turn 30.
Долгих лет жизни Вам и Вашим родным, Вы мастер своего дела!!!
да, это пожелание ему наиболее актуально.
жизнь в постоянной атмосфере кислотно-свинцовых паров долгой не бывает.
@@АланЧумак-г4ц 😞🥺
Это ирония была?
@@Василь-239 нет, нравится как человек делает свою работу.
Какую свою работу? Он делает нерабочие батареи ценой своего здоровья!
This battery wallah is tops. Every locale on this planet needs such innovative individuals to operate in this way. From boot makers to computer repairs. We all have to become local self sustaining communities.
Great vid. 👍
What's wrong with recycling centers, and rebuilding new ones in facilities where employees don't have to be exposed to acids, heavy metals and dangerous fumes?
I think you have it backwards. It's better for people to get out of poverty, than to admire how poverty makes ends meet. This is what people are trying to escape. He's not doing it because he's a craftsman, his wages are probably horrendous and he would take another better paying job if there were any.
@@bradleyakulov3618 Totally agree.
@@bradleyakulov3618 those truck batteries go for $200 USD.
Sell one, and you have a day's pay.
Imagine having a full out shop that would do everything to repair a truck. You won't get rich, but you'll make a good living.
Nobody sees what his home looks like.
@@danieljones317
Only, he's not the one who gets that $200 USD. He'll see $3.50 of that (cost of labor).
Someone rich is getting richer, and it's the owner. Someone who's going to expose himself to poisons isn't the same person who's going to acquire materials and manufacture the molds and all that. In third world countries, there's no middle class. There's the ultra rich and there's the poor and that's it.
Great example of real recycling. I do hope though as his business picks up that he will look into and invest into some good safety gear and procedures.
Dish gloves, as those appear to be, aren't rated for acid. I wonder how many chemical burns he's endured. Also, he works so close to the fumes of the job. It won't take long for metals and fumes to take their toll. Then there's the spilling of old battery contents on the ground, which over time will have a detrimental effect on the area.
I applaud the guys ingenuity and expertise. I also feel bad for him and the surrounding area because of the long term toll doing things that way will take on him and others.
We here in supposedly advanced countries have learned from the pain and suffering of others that safety requirements and standards are needed. It looks like he's an entrepreneur and not an employee, so if anybody knows him, maybe help him to find online the meds sheets for the chemicals and metals he's working with. It's wouldn't take much to get acid rated gloves and some sort of respiratory gear. Also, he may get some energy savings if he enclosed the burner with bricks.
I would hate for us to applaud him and in not too long he starts to feel the effects of metal poisoning or have organ damage from absorbing toxic metals and chemicals over time.
His buisness won’t pick up , he will do that until someone cheaper comes along or he dies from lead poisoning
@@paulbackhard6315 This is the reality.
Exactly what I was thinking. I was cringing very hard when he was cleaning the old battery waste and washing it with water on the ground. It must be disposed properly as it can slowly seep into ground reservoirs and potable drinking areas. I also applaud his work though. I would recommend wearing protective gear when he was soldering, especially considering lead fumes can have a serious detrimental effect to your health with respirated. I’m pretty sure this took place in Bangladesh or Pakistan so I am not familiar with their environmental laws.
@@benyseus6325 even if you gave him protective gear he would sell it as it would be worth a few months wages to him
@@benyseus6325 if anything we should export to the world, it should be safety standards. How many toxic sites have we had to clean up. How many preventable illnesses and deaths on the job have we seen. We've learned a lot of tough lessons and we really should be helping these countries to benefit themselves. I love to see such amazing talent and ingenuity and at the same time cringe at the thought of the long term impact.
I saw a video a number of years ago out of Indea where men were fluffing Asbestos with something like rakes in nothing but their underwear. No breathing masks, no eye protection, no ventilation. By now, everyone in the video is most likely dead. In another, I saw videos of hits in shoes and shorts taking acetylene torches and cutting ships into pieces. One guy blowup because he started cutting a fuel tank that someone hadn't emptied and aired out.
Health and safety has left the building
What building...out on the streets 😅😅😅
My grandfather was a heavy machinery mechanic in Eastern Europe from the 60s on. These were routine procedures in Europe too when there was a scarcity of almost everything. Instead of the molten plastic they’d use molten asphalt as it’s easier to work with.
very interesting thanks for sharing
Bakelite was the name of the material and it was very easy to weld and repair...
Буду ждать с нетерпением следующее видео "Блестящая методика восстановления атомного реактора" )))
ЧАЭС
Смех смехом но так живут люди в ебенях
Да хуйня наждачкой шлифанет промоет и в путь
так собрал же один чувак ядерный реактор дома в сарае. В Америке кажется. И тот работал. Правда чувака потом посадили за это
@@steelmetal8038 Странно, что вроде все цивилизованные страны хотят улучшить экологию, а один и самых сильных уронов по ней - аккумуляторы разных типов и я думал, что они реально не восстановимы, а оказывается, что вполне себе. И вот тут то и странно, зная технологию и изобретательность Европы и Америки, они так и не наладили восстановления АКБ, чтобы спасти природу, как-то не обычно, не находишь? Ну зато доллар по 150, хоть тут у них есть положительный результат, видимо ничто не остановит их от "добрых дел".
Хорошо они работают ! Трудолюбивые люди , знают что надеяться не на кого
А из какого материала белые прокладочки?
@@Евгений-м8м7е любой диэлектрик подойдёт, который имеет пористую структуру, чтобы пропускать электролит. В некоторых современных аккумах эти пластины заменены пластиковыми сетками.
I'm impressed with the skill this work requires. I don't think it leads to a long, healthy life. But really, wow.
There's obviously a real art to what these men do. Their workmanship is truly amazing.
I am Mexican and I can say a core value for us is hard work. My respect to this man and his skill. It would be cool if there were more manufacturing jobs like this in the US
tas mamado, el riesgo de manipular esto es infinito
If you love Mexico so much you should go and work hard there. And yes, we need to bring back industrial manufacturing here.
@@hebedabber2770
Gone, gone, gone, the people running those manufacturing companies have the right to make more money in their pockets - even if it means that they decimate the purchasing power of their customers.
It's been politically expedient to play into the Green dream of a 3rd world United States. They and other groups have choked industries out of the US, but like choking water, those industries left for greener pastures elsewhere.
@@HiroNguy
"Greener pastures"
ie: third world countries that don't care about pollution as well as overworking and underpaying their employees (china, india, malaysia, etc.) Previous generations sold us out to the lowest bidder.
I served in Afghanistan in 2010 with the US military and was always blown away with the ingenuity of the people there. Very similar stalls could be found in Khost and Gardez where I served. Thank you for showing us these amazing people with amazing skills
А где он запчасти берет?
These peope are of Indian ethnicity and pskistani national not afghani .
I can watch him do this, but it takes a lot of developed skill. He makes all of those cuts look easy. Thanks.
This is how may father use to make batteries 20 years back, usually we use to prepare 2 batteries per day, nowdays very less peoples involved in preparation recondition Battery process, Happy to remember those days by seeing him. Thanks
Pure art at work. Gotta love this guy. I wish he gets a ton of money doing this by talent. Make a company somewhere, and sell the scrap to recyclers that can not be used abroad or domestic. Win Win all the way! Love it.
This video is from Pakistan. It is a country of small shopkeepers. Most importantly they don't allow giant companies to dominate all of the market which allows small businesses to furnish at fast pace.
This guy will get much better salary at a giant compamy believe me
Мужик, конечно умелец 80-го левела, но самое поразительное, что он работает с КИСЛОТОЙ в почти белом х/б наряде и без дыр !!!
Интересно , а сколько они там живут, при такой работе и в таких условиях ???
Думаю долго, смотри у него даже седых волос нет
@@olegbaklagan зря так думаешь, средний возраст 45 лет
@@olegbaklagan они красят волосы
He has neither dyed hair nor the average age is 45 here. This video is from Pakistan. Its a land of hardworking people :) average life is 60+. People generally like to stay happy here
@@parayshanbacha я рад что ошибся)
Total respect to this guy! Surely THIS is sustainability writ large!!
Восхищаюсь талантом простого человека МАСТЕР своего дела!!!!!👍👍👍👍👍👍👍👍👍👍👍👋👋👋👋👋👋👋👋👋👋☝️😎
Это чужой ролик.
Какой нах талант? Этот человек вынужден перерабатывать аккумуляторы, что бы на жизнь заработать. А работа опасная и трудоемкая очень трудоемкая. Талант бл
@@ЕгорМиронов-м6п а другие люди вынуждены другое делать, чтобы на жизнь заработать и что? Чушь не неси.
вот тока новым от этого акб не станет сульфаты не удаляются с пластин от слова никак, занят он таким так как новый акб который стоит 200- 300 бакса это у них оч дорого, а работы на день стоит копейки
@@СергейТомилов-б2х а пластины разве не новые?
إنه إنسان كباقى البشر لكنه أبدع من فكره ما لم تهتم به الدول المصنعة. الحاجة أم الاختراع. برافو.
It's nice to see this progress how it should work... But when I was in India, especially in Kalkutta, I saw many of those "shops" and it was just terrible. Nobody ever had any kind of protection like gloves... They worked bare handed and with bare feed in shops completely covered in lead and acid. Their arms and legs were black and corroded by the acid. Most of them were kids....
I already told a lot of people that this is what I remember of being the worst thing I have seen in all of India (and I have seen a lot of crazy shit over there).
I hope they will improve general health conditions for those workers.
I mean this video was of a Pakistani not an indian so yeah.
@@dncdnc7447 yeah...huge difference....right?
@@lone_wolf1869 It's a fact that shouldn't be overseen, the video is in Pakistan not India.
It's an environmental nightmare. He handles hazardous and toxic substances as if they were flour and sugar. There's nothing brilliant about it. Just looking at the end: That's sulfuric acid and not apple juice that he's spilling around with.
@@gokusan1015
come on...really...white privilege? Health, safety and environmental protection becoming a white privilege? People who are not white are just allowed to destroy the environment? Can't think of more?
How I wish we have such a handy people that will repair a solar batteries in Nigeria like this guy does. He could have help a lot and earn money.
Greetings from Nigeria
Admirable este proceso de reconstrucción de baterías, mis respetos.
People make the world go around and this man and his talents are necessary.
Абалдеть! Во технология! И не каких тебе заморочек. Респек технарю! 👍👍👍
Merci de cet vidéo c’est incroyable de voir des gens comme lui recycler du matériel comme cet batterie,Mise à part le manque de détails concernant les matériaux utilisés, comme les isolateurs de chaque côté des plaques
Excellent recycling old batteries and many other talents I would think the world needs more people like this chap for sure. 👍
The recycling companies don't want the batteries they want the alluminum
Very interesting process, I’m a manufacturing guy and can appreciate the work that goes into this .
Much respect to this guy and admiration for his skill. There's absolutely no way he will escape the long-term health effects of lead poisoning, however. 😵💫
@biyukia The solder may be lead-free, but that's about it. There is no lead-free lead.
I was thinking exactly the same thing, really I can only imagine the hardships. At times he’s wearing just one glove. Also no respirator he’s definitely got high levels of lead in his blood.
Damn man all he needs is an n-95 and that should stop most particles:/
@biyukia Yea? He got lead free lead acid batteries too, numpty?
@biyukia No, but he's certainly breathing it in(particularly when melting it), and touching it every day.
I have no idea whether or not that's worse than all the traffic fumes he's breathing in from the street though.
QUE TRABALHO ARTESANAL BRILHANTE, PARABÉNS PELA DEDICAÇÃO EM FAZER O MELHOR PARA AGRADAR OS CLIENTES.
Sim, ótimo profissional desse Ramo de negócios
When I was a kid growing up in Puerto Rico in the mid-80's there was a guy that used to this. You would take your no longer working battery to him, and he would open it up like this gentleman did and put it back to like new condition. It was cheaper than buying a new battery, that was for sure 🙂
Looking at what he did, he turned a 150Ah battery into a 85Ah battery, its a bit of a scam really. Better of buying new. Cannot doubt his work is good though.
@@PF-gi9vv can you explain to me how that's so. I don't have a lot of knowledge about electricity and batteries.
@@fountainofspeech1379 Look carefully, the plates are slightly smaller than the originals and there are less of them.
@7:01 Look how he packs both outer sides with a large amount of insulation rather than using lead plates. The battery results in less capacity because of the overall less surface area by using smaller & less amount lead plates & more insulation.
Original stack has 11 plates, new stack has 8 plates. Good catch.
@@PF-gi9vv thank you dude!
Great skill shown here, admist what sounds like a insane amount of noise. This is not for the unexperienced, lead is like asbestos, you have to respect it, wow the mix of acid, lead and plastic - don't try this at home, unless you know what you are doing. Thanks for the video, was very inforative as to what is inside a battery like this, you are braver tham me...
The acid is a much greater hazzard.
@@tinknal6449 nah, breathing in the lead vapors in is way worse. acid just is itchy in 1100~1300 grav like new batteries use. now if it's straight hot acid, it wouldn't last long in his container he used to pour, usually they get all soft and melty and he wouldn't dare burn up his hard work with that.
the worst is the black sludge on the jars from off gassing its super concentrated and sticks like grease. that stuff tingles right away, the other stuff you notice like 30 to 40 mins later because it itches when you start to sweat.
@@matthewmenteer5673 He's outside. Lead vapor really isn't a big issue under those conditions.
This man is a real mister, gentleman.
Каждый советский ребёнок знал что внутри аккумулятора и как забрать свенец :)
Чувак реально крут. За его работой можно глядеть не отрываясь... Я думал так только мы можем, но я видимо сноб.
Такой работой от бедности занимаются.
Skoro Russkie budut na kajdom uglu takoy xuyney zanimatsya
@@kidzeezy0112 сгинь, охломондер!
I've spent a lot of time in the Philippines, you see a lot of the same ingenuity and resourcefullness there. When you're dirt poor nothing gets thrown away, everything can be reused somehow.
Прям город мастеров. Теперь я понял, почему в подобном АКБ у меня в одних банках уровень уменьшался, в других увеличивался - электролит перебрасывало.
There is no million $$ government grants here... Just a skilled worker putting in a days work and keeping the land fill empty. Nice work
Suco de groselha com pupunha menino
He doesn't give a hoot about any landfill. The return on selling that is a lot more than the material he put in and his time, as sad as that is. Pompous westerners man.
@@derekv6479 His time has no value to us pompous westerers. He'd be lucky to earn $50 a week. Our landfill, on the other hand... now that has value
Yup... That's the kind of work most people would be doing without government regulations.
Мы раньше с отцом тоже собирали аккумуляторы ,я и сейчас могу собрать, мужчина молодец,все у него хорошо получается)
Это что он за пластины сунул вместо свинцовых?
Если не секрет где брали новые пластины?
Я вообще не понимаю, зачем я смотрел это поздней ночью :)
Странные алгоритмы Ютуба
Удивляет, какое у них всё первобытное, на коленке. Правила безопасности просто посланы на**й :)
@@птицеводюный дак это старые, отмытые просто. Он их в начале доставал
Так зачем? Дешевле и быстрей же купить
While a primitive approach doing it all by hand...they are getting the most out of their resources and keeping things out of the landfill as long as possible. Good job!
Работа этих людей достойна уважения!!!
Да, только вот спайка этих банок внутри аккамулятора должна быть намного толще, а то при длительной нагрузке может расплавится.
@@georgijz1783 да там и аллюминий может расплавиться изи)
@@pasha_wolf ну только эти переходы усилить, и тогда нормальный акум будет
Если он ещё выдаёт такие токи, а то как-то всё по простому сделано
@@georgijz1783 я смотрел Дениса механика, он там с собой мутил)) говорит работает спустя несколько лте
Да лепят из говна говно.. знаний 0.
Seems more like a proper Battery Rebuild rather than a Restoration. Awesome!
O trabalho é excelente, e entendo que ele está fazendo o melhor que pode, pena que as condições e os equipamentos sejam tão precários, com certeza manipular chumbo, ácido e outros materias tóxicos dessa forma acabaram combrando seu preço mais cedo ou tarde.
Au moins il a des gants, avec un masque ça serait encore mieux. Grâce au Covid c’est un équipement de protection qui s’est popularisé.
@Trash Tier Waifu These people that don't use chairs and tables stay supple and with a strong healthy back. It is the people in the west that sit on chairs all day that nearly all of them develop back pains. Their backs get weak and vulnerable. Ask any physio therapist, they know that this is true.
@@DutchmanAmsterdam yep, much more natural for a human to squat than to sit.
To all the hard working brothers and people in the world, I wish you and your family all the the best and luck!
awesome, that was so cool to watch. I been wondering how people did that. He made all that look super easy. would be so hard not to spill more everywhere. Super Steady and patient hands he has.
That’s not how you build a battery that’s how you pretend you know what your doing and end up killing someone
LOL
@Jon Rymer F
De pakistan para el mundo
@@jonrymer316 So you know better? What he is doing is heaps better than the Western World idea of recycling, making lower value items from the scrap material.
Хорошая работа, дарить людям маленькое счастье, к сожалению нам не дано предугадать
сколько нам отпущено в этой жизни, данная Страна может гордится такими людьми
Что ты несёшь? Это же дичь несусветная!! Этот акк проработает меньше чем он с ним возился.
...в 90-х на военных ЗИЛах, Уралах и пр., во всех автопарках страны с нашими СТ90, СТ120 мы тоже таким занимались, можешь нами гордится...нищета рождает героев, сделать что-то когда нет ничего - подвиг...:)
This man is amazing! He's a tech artist!! I hope somehow he gets protective gear so lead does not end up killing him. Well, lead, other heavy metals and the chemicals, along with the fumes from the melted plastic. Over here no one wants to work if not havving a table, chair and proper tools. This guy is sitting in the street, using the pavement as his table. Awesome!! What a dexterity.
Also bet you he has no knee pain working on the pavement. Incredible dexterity
อายุจะยืนไมดิ เพราะร่างกายคงจะสะสมโลหะหนัก เยอะตะกั่ว
Not to mention sulfuric acid
So if this guys an artist what am I putting an engine back together? Come on man
Very interesting to see this done. One slight slip could be catastrophic since he has almost no protective equipment. The toxic fumes are ridiculous. I hope he survives and moves into a healthier career,
Какая карьера? Когда средняя зарплата в Индии меньше 150 $ в месяц? Там главное выжить. Хоть как. У меня, примерно 350$ в России. И это очень мало...
@@Рустам-хан I make about that in a day!
hace 40 años usaba esa tecnica para restaurar baterias gracias a dios lo deje nomas trabaje 5 meses , es altamente nocivo a la salud
Eso me estaba preguntando, cuántos años de vida y salud va a perder ese señor por trabajar con elementos nocivos sin protección adecuada.
Un genio!!! El trabajo que realizó en las condiciones que lo hizo, es para sacarse el sombrero, lo que podría llegar a hacer éste hombre si tuviera mejores condiciones para trabajar!!!!
Felicitaciones Máster!!!!!
y respirando todos los toxicos.
Lo mas peligroso y contaminante que he visto este día, no solo para el sino para el suelo, los animales y las personas a su alrededor, me imagino que es desgraciadamente la única forma que tiene de ganarse la vida.
El cancer es gratis!
Yo valoré la capacidad de la persona, lamentablemente lo que dicen también es cierto, está expuesto a todo y el daño al medio ambiente es terrible, pero tal vez ni si quiera esté al tanto de lo que hace, valla uno a saber
well done brother, really enjoy seeing people with real life skills 👍 top video to watch
This worker really made a brand new battery.Bravo !
A post nuclear war, these guys would rebuild a city from bits of scrap metal, old tyres, an old computer. Truly masters of ingenuity.
Never thought that I’d watch something like this and it was amazing!! This is definitely a skill!!
Молодцы, пакистанцы! И главное, что всё на корточках. :) Дай Вам Бог здоровья, ребята!
Да уж, от постоянного вдыхания паров свинца и горящего пластика здоровья явно не прибавится
@@Djoni139 ...живя в загазованном забитом автопробками городе, потребляя еду непонятно из чего сделанную, запивая ее раствором ортофосфорной кислоты с кофе и сахаром, ты правда считаешь свой окружающий мир чище и здоровее...:)
@@mrChuvack1 я в станице живу, тут воздух чистый
beautiful, i've learned something useful here, thank you, i was having battery construction questions arising from getting the most life out of my batteries and this helped a lot.
This guy is an old world master craftsmen...he is so talented..oh my God !!!!....this world needs many many more like him..he is the battery God!!!! I'll bet his talents don't end there!!!!
Foolish and a danger to himself.
Absolutely Fascinating. We take so much for granted in this world of technology. Great Work my friend!
In Canada and US it's done on mass scale, in India it's a nice shop he got there !! He did a damn good job IMO.
@@minion7111 That video is from Pakistan. However, it should be very similar in India as well.
Un trabajo realmente precioso y muy profesional sigan adelante aprendemos mucho con su documentación bien redactado, una labor precisa y funcional 👍
لا توجد معدات معقدة وبامكانيات بسيطة اوجد لنفسة عمل يحتاجة الكثسرون تحياتى لك اينما كنت واتمنى ان يكون لنا ملايين نت هذة المشروعات الصغيرة والوظائف ..شكرا لك لعرض الفكرة وارجوا ان يحذو مثلك الك الكثير لتحطيم الاسعار وعرض البديل لمنتجات المصانع المبالغ فى اسعارها ...