Project 0134 | Slotting Machine on a Lathe | Internal and External Keyway Cutting
Вставка
- Опубліковано 20 вер 2022
- Get the exclusive NordVPN deal here: nordvpn.com/makeitextreme. It’s risk free with Nord’s 30 day money-back guarantee!
Thanks to NordVPN for sponsoring this video.
On this video, we decided to show the making of a slotting machine which is placed on a lathe.
► Get the plan: / makeitextreme
► Linktree: linktr.ee/makeitextreme
►All details about the video: bit.ly/slottingmachine
----------------------------------------------------------
AMAZON AFFILIATE LINKS:
-------------
►Tools in this video:
Engineers Squares Set: amzn.to/3IgWU4G
25FT Tape Measure: amzn.to/3hcUBDH
Mitutoyo 500-197-30: amzn.to/3sZwXQB
Marking Tool: amzn.to/3Ig0SdX
Welding Magnets: amzn.to/3JRATJU
Digital Angle Gauge: amzn.to/3h9MojF
Heavy Duty C Clamp: amzn.to/3BZ2uGJ
Center Punch Set: amzn.to/3hcWDnj
Jobber Drill Set: amzn.to/3HgsYo3
Multicolor L-Key Set: amzn.to/3t2Xxsb
Countersink bits: amzn.to/3sci2mT
Magnetic Drilling Cutter Kit: amzn.to/3HdsKy0
Camera Nikon D7500: amzn.to/3sot7l0
Useful Tools we recommend: amzn.to/3Ii2ljF
Lathe/Milling Parts: amzn.to/33JjDqX
Makita Tools: amzn.to/3t0eOSR
Videography: amzn.to/3H8jaMM
Our PC: amzn.to/3Hexljo
►Check our Storefront:
www.amazon.com/shop/makeitext...
-----------------------------------------------------------------------------
Click here to Subscribe: bit.ly/MakeitExtreme
Second Channel: bit.ly/MakeitExtremeShorts
Facebook: bit.ly/Makeitextreme
Instagram: bit.ly/makeitextreme
TikTok: / makeitextremeshorts
Welding Machines:
Mig: bit.ly/Rallymig
Tig: bit.ly/PITIG
►Special Thanks to our new Patrons:
TOP (Jakob Keller)
Antonio Sola, Rafał Merchelski, Artemiy Starolavnikov, Ryan Petersen,
Dyon van Baal, Dorian Mathews, Alex, Allen S Mahler, Vincent Ret,
กาวิน วิจารณ์, Nicolas Vaes, Chuck Miller, Angelo Negro, Noah Parker,
Sami Fischer, Droyer, Kostadinov Deyan, Hartono Lie, Ricardo Lopes da Silva,
RetroSteamKnight
Music from Artlist: bit.ly/MIEArtlist
(Subscribe now and get an extra 2 months on your subscription)
#makeitextreme #makeitextremeshorts - Наука та технологія
Get the exclusive NordVPN deal here: nordvpn.com/makeitextreme. It’s risk free with Nord’s 30 day money-back guarantee!
From Ecuador Congratulations my dear friends really you are the best all homework.
انت مبدع
@@gghghhjtr4478 y
@@danielcartier2570 թհգռռ
@@gghghhjtr4478 gmg
The way you tell the story of these builds improves and evolves every single video. The designs have always been brilliant.
Thank you very much!:)
@@MakeitExtreme I want to draw all the pieces I need help
Dude built himself a modular shaper. I’m loving it so much! Your storytelling is so good too! Thank you for sharing these videos!
Glad you enjoy it!
*Everything about this video was great.* The lathe work, music choice, playback speed and editing, etc were all excellent. *Well done.*
I get you're busy, but still; I wish you were able to post more videos. Besides learning from them, they're also relaxing.
Thank you very much!
using the ball bearings to linearly constrain the shaft is genius
yeah, what he said!
Standard engineering practice
Great build, but how well will it hold up though? The balls are constraining the shaft to move in 1 dimension, but it's riding on 2 rather sharp edges that are the keyway shoulders. I'm sure it will suffice for intermittent use, but why not a ball nose end-mill of exact same diameter as the retaining balls for increased contact area?..... Also.... No lift on the return stroke? Regardless, great build, keep up the good work!
@@NStone79 there's so many places where this falls short, but it's not meant as a serious machine tool. If they use it at all it'll be fine for the job.
@@Argosh it wouldnt get used at all, i dare say. gotta clamp the mount down. then go get motor from shelf, clamp that down. fiddle fiddle, tinker tinker, adjust and tweak... spend half an hour setting up, when you could drop the bar straight into the toolpost and do it by hand in a minute.
then pull it all off and shove it back on the shelf to do the next operation... thats not a useful tool.
its so slow and clunky it wouldnt be helpful if doing several, either.
like everything made on this channel. its a facade. flashy editing, dramatic music... but the actual engineering is absolutely pathetic. nothing is done properly. rather than watch it fascinated... you already see that theres some failings... try and pick up on just how many aspects of each and every design he gets wrong... whole backlog of videos with these janky contraptions that serve no real purpose other than make views.
"he"... its a whole team of people... at least three. everything planned and thought out but nothings actually... "thought out". other than "how to make video".
am i being too negative?
naw. this is one of those channels that i try not to watch as it simply pisses me off. like bashing my head against a brick wall :)
I have watched more than 1 channel with mechanical and engine themes. But this one is EXTREMELY GENIUS. I can only shake my head in awe of what this brother did. With every detail very fine and precise measurements. I really love this channel. Hopefully in the future videos I can see you driving your motorbike with your single mini jet engine. gbu brother. brilliant job..👍🏻👍🏻❤️❤️
Amazing every time. The ideas, The engineering, the making, the filming, the editing, ... Every thing is just WOW! Thanks a lot.
Glad you enjoyed it!
Класс! Высоко профессиональная работа! Смотреть одно удовольствие. С уважением к вам простой российский пенсионер. Желаю всем здоровья мира и добра.
The talent that you have been blessed with takes many years to learn it is the same becoming a master craftsman in wood working making fine furniture or cabinets of top line quality.
You're a star ! - At 10:37 you just showed an amazing trick to hold square bar in a 3 jaw lathe chuck by using a bit of tubing to get around the 3 jaw problem - I sadly didn't think of this before I bought and installed expensive 4 jaw self centering chucks on all my lathes just to have the privilege of being able to turn down square bar stock without having to use a 4 jaw independent chuck and mess around with clocks to get it dead center ! - Well done - Great project and video man ! 👍👍👍👍👍
Use collet or make collets
@@mastergilbert97 Yes !
A magnificent piece of engineering fellas
Well done.
Enjoyable watching the builds you do. You don't leave out any details. This key way cutter is really a work of art .
WoW, You guys never disappoint!!!! I can see that coming in handy for future Extreme Builds.....
Well thought out project. Nice seeing it come together as presented. Nothing flimsy going on here AT ALL!
Love the build you always give my mind something to think about engineering wise, only thing i might do different is add a clapperbox but get that given yours rotates it could become a problem. Other option is adding a horizontal drill attachment which some lathes already have attachments for.
Great work and only dream of a day i can afford steel when its not for a paid job haha
23:53 Like a hotdog down a hallway. We've all been there
It looks very easy but I can tell the deep engineering involved in this design. Very fascinating and ingenious. I loved watching every secod of it. Your design, skills, and building something from drawing board to working tools, are just amazing. Thank you for sharing.
JAYSHREERAM
You are a talented engineer. Thank you for your videos. They are very useful to me
I showed this video to my wife. For some reason she wants me to make her one.
The work-holding techniques in this video are pretty clever. Drill some more holes on the motor cam at different radiuses to be able to vary your stroke length.
....you should always be able to vary your stroke length....😁
I could see that tool being very useful. Nice work. And congrats on getting a sponsor. Hadn't seen one on your channel before.
Thank you very much!
G’day guys, you make THE MOST AMAZING projects on UA-cam without a doubt! I became a boilermaker straight from school and have learned machining reasonably well. I make a lot of things in my shed, but you guys are on another level! I am ALWAYS totally amazed. Shows that you need more than the actual metal skills to be really good at ‘metalwork’. Really really good!
I watch a lot of sites like yours, but none really compare.
Quick questions now that I’ve stopped with the hero worship, lol, Are you worried the bearings will quickly were the groove as they are much harder. Is there a reason you didn’t use pillow blocks or linear bearing cylinders? - I prefer your make it yourself so I’m not being critical, just curious.
I’m just an old disabled pensioner in Australia now, but I’m still going to see if I can support you somehow, seems fair since I get so much enjoyment from your work. The videos could be a little more frequent though, you tend to ‘disappear’ occasionally. I’ve been watching since your “Extreme Pipe Notcher” Got me hooked immediately!
Anyways, all the best mate. 🍻 Michael
A great video and DIY making. Keep up the wonderful ideas and impressive fabrication guys!
That is bloody brilliant! One of your most interesting builds! 👌👌💪
So, you made a shaper for the lathe..., Very cool
I can't help but think, given the time taken to knock that up and the resultant flex you could see on the cutter in one of the shots...
It probably would have been quicker to mount two motors on the x and y wheels and just bolt a cutter into the tool post.
I guess I only think so because for me it's trivial to control a couple of steppers.
To each their own.
I watched this video with no sound due to other things going on. Absolutely fantastic video! Well done and well built!
Thank you very much!
The filming guy + editor of the video did as much work as the actual building process😭👍
Bro your a born genius, honestly you got burned talents,keep moving forward brother and stay blessed.
Beautiful work guys, I'm going to build one for work. I hate cutting key ways with a broach and press.
Great video. It all starts with an idea, and that was a pretty good one. I love it! Thanks Ron
Every time I see one of your videos I learn something. I've never seen a fly cutter used like that. It's the first time I see someone put one on the lathe.
I really love your channel, my friend. I get mesmerized watching your precision work. Thank you for sharing with the world.
Felix
Thank you very much Felix!
Now that I've seen the end product, you could use some kind of tapered bit to make your own gears if you wanted to. That would take things to the next level.
Amazing Design , I Loved The Ball Guide Mechanism !
A keyway cutter? Bro you have made a hydraulic broaching rig. The possibilities are endless. You can make your own internal and external splines, transmission gears, etc. between the lathe, vertical mill, press brake, and now the broacher you can make damn near anything
Indexing or rotary table, shaped cutter and you have an awesome gear cutter. Keep up the good work !!
This guy is wealthy to own those lathes, the mill & the cutting tools.
Good work man. What an accuracy and finishing bro.
Absolutely amazing video !
Nice work as always. We shared this video on our homemade tools forum this week 😎
Awesome! Thank you!
At the beginning I didn't knew what it was, but damn is it cool! That's very practical! Congratulations again my masters!
Video takes, lighting and editing are top level. Other could take example.
Love the tracking shots around 11:35 I am SO going to borrow that idea for my own vids!
Профи! "Дядько Максим" нервно курит в стороне..
Excellent build. Very useful tool!
Very very very very nice👍👍👍👍
Good idea sir🎉🎉🎉🎉
You are genius and good work🎉🎉🎉God bless you❤❤❤
🤯 WOW. This is what im here for. So nice to watch!!
Impressive, as always. The great work!
that was an excellent job---well done
the rotating part is a good idea , been thinking on sumting simulair but mounted verticly and using a milling machine base , the lathe is more solid though
Brilliant, dude! Really beautiful machine!!! 😃
Stay safe there with your family! 🖖😊
Thanks, you too my friend!
Nice build, however, something has me puzzled:
Why did you make it so that you can indicate the plunger in various angles while it can only be used effectively when the tool is aligned with the feed direction of the cross slide? Wouldn't it be easier to have it fixed and indicate the position by indexing the part itself with the spindle?
Go to 23:33 😀
@@donfoster1832 yeah, he rotated it 180 degrees, that works. However, if you look earlier in the video he put a bunch more holes for indicating in. Let's say he rotates it into the 90 degree position, how's he gonna feed now without adding a vertical axis?
Muito lindo, uma verdadeira obra de arte!!!! Parabéns amigo Deus abençoe vocé e toda a sua família grandemente abraço Tmj 🙌👏👏🤜🤛🇧🇷🙏
CONGRATULATIONS! you just made a metal shaper that fits on your lathe lol.
Very nice. The only weakness I can see is the store bought turnbuckle. Everything you made was excellent. Are you able to index your lathe chuck inorder to cut splines?
This is fucking addictive to watch ! If you don't like what he's doing you still watch because the music is damn awesome .. Just an amazing work !! A+++
Great idea and great work ! Thumbs up for this !
You put the "fun" back in fun.
It’s been a minute since I’ve been on a channel cinematography is really stepped up nice work man
Wow this guy is a genius. Thanks for sharing 👍 you knowledge. I learned something amazing 😢. Thank again
All of the music in this video are bops
Super job, as usual! Would it be possible to repurpose this idea for cutting splines? (OD and/or ID) Splines seem to be a big hangup for E Vehicle conversions.
One of the best machining videos ive seen in a while
nice addition for the lathe!
Holy shit how am i just now finding this channel. Some
Great machining action going on here
Good work and high precision👍
Awesome build man!
Great job, thank you brother. You are so talented
Fantástico trabalho de nível internacional Maiden Brasil!!!
What a editing man, total masterpiece 🔥🔥🔥🔥🔥🔥🔥🔥🔥 and what a idea, total genius 🧠🤟🤟🤟
Glad you liked it!!
it’s a remarkable machine bravo!
Jackob is the man...! lol Brazil. Good job.
Your work is impressive! One question that I'd like to know the answer; I use similar tooling to yours, but what ever I do I end up with relentless birds nests of continuous unbroken swarf, very unlike your easily manageable fragmented swarf. Is it the inserts that you're using, or the speed as well? Out of interest what are your choice of speeds and insert?
Лучше сделать несколько отверстий в маховике для регулировки длинны хода.
Awesome job! If I were to change anything, I would put a T Slot in the flywheel so you could adjust the stroke. Otherwise, great!
Me gustaron los acabados se ve muy bien el proyecto gracias por el video 😀
Editing is on point!!!!
Top demais muito bom parabéns vc é um exelente engenheiro
nicely built!
it's pitty you didn't make an adjustable stroke length on the flywheel, it's a missed opportunity.
then you can make internal/external oil grooves to.
You do have a point. Very well could have.
Insane projects!
Really really impressive 👍
Very impressive! The only thing that might be missing is an adjustable stroke length.
Great project on useful shop tool.
Thanks for sharing.
Thanks for watching!
Seems like a big job to keep a smile on your Mrs face
You have skills beyond a my imagination.
Amazing idea congratulations my friend
Very nice videose 👍👍 .. Turning . Threading. And parthing . grooving. Operations very nice👍👍
Impressive work
That is amazing what you build there it was great to see it an watch it there an keep up the amazing video clip there 👍👍
Glad you enjoyed it
impressive 😎
looks like a hollywood movie
nice shooting
Hello mister beautifully made professionally done good job my friend
Thank you very much!
So much detail. Keep it up..
Excellent build. :)
you are so professional man
You have a carbide threading insert. Buy a left hand insert, invert your threading tool and thread away from the shoulder. You reduce your chances of a crash. One job that I hand was worth over 100K before I touched it. There was a large sealing shoulder for a threaded plug so you had to make an undercut for the threading insert and thread away so the shoulder wouldn't be damaged by a "WHOOPS". Be safe.
Excelente trabalho!
Very good job, respect from Russia.
🤩Good job and great intelligence
Dope is the only word that comes to mind.
Шикарная работа а главное нужная 👍