Making Slotting Machine
Вставка
- Опубліковано 15 лис 2023
- I have always had a problem with wedge grooves, so I decided to build a machine that would solve this problem. I used two gear motors for construction, one for attaching the chuck to the lathe, the other for the drive.
The machine works great, although it still requires a few corrections, but it handles wedge grooves very well
Start supporting this channel and you will get these bonuses:
/ @workshopfromscratch
I think you and your friend at made in Poland are having a friendly competition. Did you see his "Over engineered spray can shaker" 😱😵💫🤣 Good job 👍👍👍Thank you for sharing. Be safe 🇨🇦
Very nice work! I truly appreciate your drive to build machines!
Undoubtedly, the master craftsman had reinvented the wheel . Thanks
That was a great build nice machine will come in handy wish I would have seen this 50 years ago great job
Thank you 😁
This guy is really good. I would like to see him build a crank shaft balancer for V8 engine since it doesn't seem anyone else has done it.
In Germany we call it Stoßmaschine. Well done, this Machine works nice
Perfect ! - Well done - Very, very useful machine which is similar to a shaping machine - I think I need to build a key way cutting machine like yours ! - Love it ! ❤
My wife wants one of these, no idea why... She doesn't even do metalwork.
😂😂😂
😮😮😮😂😂😂😂
She can buy THAT kind of machine, it is more gentel and doesnt cut anything...
@@nikhasmadi3314😅😅
😂😂😂
👏👏👏👍
I am sure it took you longer to build this machine than merely hand filling a groove. However, now you have a excellent machine to do other grooves and splines on outside or inside situations... Thumbs Up!
Thank you 😁
No, it was the same amount of time for it was way more fun than the pesky hand file! Nice machine!
but now he never has to file again ^^
👍👍👍👍
You are really more than wonderful
Innovative, smart, and your ideas are organized
But what attracts me the most is the equipment and machinery in the factory
I wish I had one like it one day
Po❤
Cool stuff! I'm sure the wife would appreciate the machine in a slightly different configuration too!
It was so fun watching you work 👏
Impressive work bud... I bet all that steel and kit to build it wasnt cheap... great if you have lots of splines and slots to cut.
Nicely done! I need to build one!
Very good fabrication skills. I have a shaper but would like a vertical slotting machine, you have given me some useful ideas. Thank You
Excellent substitute for a shaping machine if you have lots of keyways or splines to cut.
Great project. Thank you for sharing.
Your industrial, planning, design, execution skills are extreemly valuable. I am wondering what kind positions the world value your skills in ? My opinion is somewhere very high in the industrial world, even the inventor level CONGRATS. you can create ppretty much what you put your head to.
I will definitly follow your channel.
Fantastic work, dude! Really amazing machine!!! 😃
Stay safe there with your family! 🖖😊
Thank you 😁
That took some time to engineer and source parts for.
Personally, a set of keyway broaches would have been more practical, but not as interesting as building this shaper. 👍
Very interesting build, Well Done.
But why the horrible grunching noise at 16:53 when the speed reduction box output wheel goes through 8 and 10 o'clock, is there something wrong inside or is something interfering?
It only makes this noise on the forward to reverse changeover stroke, ie when the tool bar is the most extended, there is no noise when it goes from reverse to forward ie when the tool bar is least extended and it not cutting anything yet.
Nice and simple. Great job!
Thank you 😁
Muito bom trabalho , para ajudar fazer o serviço de corte faz uma maquina de serra fita bancada na vertical , invés de você usar o policorte , te garanto que o serviço te renderia muito mais.
Well done and a 👍as always. With any new design/build, it's likely you'd make small changes after a time of testing and use. If you do make changes with this or any other project, a video of you pointing out those changes as you address them would be great additions to your other channel-Infinity Garage. Just a thought. God bless.
Thank you 😁 I plan to add such videos to my second channel 😀
Regards
That looks totally wicked
Awesome bro
Thank you 😁
Great footage 👏
I come from Vietnam hello. You share many beautiful and useful products. I would like to have a specific drawing of the lift table. Thank you ☕👍
Very nice machine. The sort of machine that I would build he he, although I have not have much of that sort of content yet.
Good job
Thank you 😁
Magnifico progetto amicone miooooo😍😍😍
Onorato di imparare da te. Sei un vero MAESTRO
Grazie 😁
I praca staje się łatwiejsza😊 Good job
Dziękuje 😁
Good job mister beautifully made well done
Thank you 😁
Epic fab skills! And respect to anyone with a jig bore.
Thank you 😁
You always make it look so effortless…. Great job!
There is always some effort, but I try to show the work in a way that encourages others to build similar machine 😀 Thank you 😁
Ło Panie! Konstrukcja jak z fabryki! RESPEKT MISTRZU :)
Dziękuje 😁
You should stop while I still have enough time and energy. I'll end up in the shop all night trying to duplicate this thing and won't get anything else done.. Great work!
You should add a clapper to the cutter and face it downward, like a shaper!
you are sharper than a sewing needle !
Ciekawy sprzęt i ładne wykonanie 😎
Dziękuje 😁
The stroking shaft, is that reversible, or the 3 jaw component removable? And can you attach toys to the stroking shaft? Wife wants to know...
Wholly cow. Does it double as a log splitter? It’s pretty cool.
Il y en a qui sont doués, BRAVOS.
@17:30 the pumpings is so amazing that it needs multiple scenes to feel the excitement.
Luksior👍 też o czymś takim myślałem
Es muy bueno el trabajo tenes un montón de máquinas para hacer, muchisimas cosas. Lo único que me dolió es como usaste el calibre para trazar.. 😣
Świetna maszynka! Super robota!
Dziękuje 😁
Hermoso trabajo. Increíble. Sos un obrero totalmente calificado y cualificado. Me sorprende los detalles que, pudiendo hacerlo simple, lo haces con gran excelencia, como las manijas de avance.
Realmente es muy satisfactorio verte trabajar.
No tengo el dinero para unirme. Pero me suscribo y pongo like. Te mando un gran abrazo desde Argentina.
Шпоночный паз можно легко сделать на токарном, а это рукоблудие для того, чтобы потешить самолюбие.
I think all machinists make miracles....😁
Great job. Thank bro!!
What is the price of this laser welding machine and where it is available online?
@Workshop From Scratch, Great Video and Build. What Brand & Model is your Horizontal Band Saw? That’s a very nice looking Saw. I’ve been looking for a good Band Saw for Fab Work. I think this one would do nicely!
This is an amazing machine, superior fabrication skills as always! Forgive me, but I dont understand how it works. Does the cutting bit have to move deeper and deeper into the groove as it cuts? This is well above my abilities of what I might ever do, so maybe it doesnt matter if I dont understand, but I definitely enjoyed watching. I know it is impossible for you to make this many videos, but I would happily watch 3 hours of your videos every week. Thanks for sharing!!!
if you look at 16:57 the complete view of the machine, you'll see a handle on the right side. When you turn that, the cutting tool (and everything else) will move "to the left", making the cut deeper.
@@jorgeconcheyroAh, makes sense, thanks!
*Very nice job* 👍👍👍
Wow! A bit overkill I should think (3 phase power no less!), but better overbuilt than under built I suppose. Nice job!
Thank you 😁
Very nice work!
Awesome Design & Build
What Brand are your Countersinks? Those are the Best looking Countersinks I’ve ever seen for Metal Work.
I'm thinking you could add gear cutting to this, even for small gears it would be useful.
Yes, an Indexing/dividing attachment could well be added if he wants to cut gears...
Excellent job 👍
Thank you 😁
You're welcome !@@WorkshopFromScratch
Good work 👍
Hi, but what happened to the video of the wheelbarrow with motor that you then made with the hydraulic skip? It's no longer on the channel
An offer to mass produce? A problem with a component or design problem that didn't come up till some use? I don't know if I could ever make such a thing but a power wagon would be nice and not have to pay for some big brand one, I remember the drive axle stood out, looked familiar like from a zero turn mower or something.
@@Sryously Non mi sono spiegato mi stavo riferendo a un video che hai realizzato anni fa tu, non so come definirla ricordo che hai fatto la parte due dove rendevi il cassone idraulico, ricordo che hai utilizzato il volante della fiat 600
Excelente trabajo.
Master man ship 👍 but caption was not right you did made 90% home made other 10 is not you made buy your self 😂 like motor and other main part I don't know the name of that thing which keep holding things in center , but over all I really love to watch your master work its very clean and show your class , keep going and or spreading knowledge to this world , more to come GOD BLESS YOU 🙏
very good project and very useful !!! well done
Crazy genius!!!
That's a great job !
Is the internal tube made of brass?
Yes, That is a brass bearing/bushing he has gone for in order to give his machine better long term durability and get his machine to run smoothly... as brass and copper are excellent bearing material for reciprocating/stroke actions.
Столько времени, сил и материала, для изготовления такого оборудования, рационально лишь в том случае, если изготовление пазов под шпонку необходимо по несколько раз в день😮
Точно, тем более что при расточке внутренних шлицов расстояние придется " на глаз" подгонять измерительных приспособлений не предусмотрено. Готовый станок думаю не сильно дороже бы обошёлся
the painted seals on the worm box will harden the seals prematurely and cause oil leaks, might want to change them out.
What are the specifications of the engine you use?
Parabens pelo trabalho , mas vc poderia fazer um serra fita bancada vertical ao inves de usar o disco de policorte nas chapas de ferro adiantaria seu servico
Super job bro
How are the two ends set to be level along the center axis?? The chuck holding the piece and the boss holding the piston.. I watched the video twice and didn't notice how you set up them level... nice work as always though
15:36 there are slotted holes for height adjustment of the reduction gearbox. Same for the other axis. I wonder why he didn't add a pawl/ratchet mechanism, like a real shaper does.
Very nice build...but the major disadvantage is that the tool has no guiding in the bore hole. So it will be pushed away, that's why you can only make veeeery little steps. In a worst case, the cutting tool might jam on the flange and break or bend or something breaks.
Why not use standard reaming tools with just an x movement of the support?
Невозможно читать пошлые комментарии!!! А станок получился очень аккуратный и отличного справляется с поставленной задачей!
Wow so amazing,i love it
You make mini lath M/C too.very simple key hole M/C Love from INDIA.
Well done!
Thank you 😁
nice bild !
cheers ben.
Thank you 😁
Inteligente demais!
Du beau travail je ne doute pas, vous avez réalisé votre machine avec précision oui , mais je crois quil manque un détail, vous avez oublié d'intégrer la possibilité de réglage de la course de l'outil de clavetage, votre course est fixe, ce qui rend impossible de faire du clavetage sur des pièces plus profondes.
Merci
With some changes you can make a rifling setup
Excelente trabalho 👋👋👋👋👋👋👋👋🇧🇷
I AM OVER 50 YEARS OLD BUT I WOULD LIKE TO BE YOUR APPRENTICE !!
J'aime ce travail❤ vraiment je suispassionné si c'était tout près de chez moi.merci travail
Very good one
Ottimo lavoro, ciao👏💪👍
Grazie 😁
Eine sehr schöne Arbeit!😃😃😃
Belle réalisation 👍👍
From the title i thought he want to build a slot machine (casino) 😂😂😂
Belo trabalho.... Você e um gênio
You have to be the only person in the world that uses a MOORE jig grinder as a drill press.
Świetnie sprawdza się jako wiertarka, nie wiedziałam, że ma inne funkcje 😁
Nice work
Thank you 😁
КРАСИВАЯ РАБОТА! скажите почему выбрали горизонтальное расположение этой машины?
Superb knowledge. ✅
0:17
I was fully expecting a finger wag. Kinda disappointed, but warmed my heart you didn't.
Yeah, the finger wagging is so condescending to viewers. I hate it.
я старый моряк дальнего плавания. в моё время не на всех судах были станки для подобных работ. я учился у специалистов, которые в войну перегоняли пароходы из америки. шпонпаз подобный этому мы делали при помощи ножовочного станка и крейсмеселя. много времени не требовалось.
Skillset is phenomenal. However, I would never make such a machine while I can buy a broaching set for a 200 $ installed on a handpress that is for sure more efficient than this machine. Great content btw.
He makes money as a UA-cam content creator. This video will make money, and he can always use the parts on another project if he wants
Jaki byl koszt budowy ?
good work
How does it move left and right?
I think this guys has tree which is giving metal sheets in his garden😂
How can I come from the USA and learn from you ???