How to Replace Front Wheel Bearings 2011-2020 Toyota Sienna

Buy Now!
New Wheel Bearing from 1AAuto.com trq.video/ic-1...
New Wheel Bearing Set from 1AAuto.com trq.video/ia-1...
This video shows you how to install a new wheel bearing on your 2011-2020 Toyota Sienna. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
Estimated installation time for a professional technician is approximately: 2 hours 30 minutes
This repair was done on a 2011 Toyota Sienna Limited 3.5L Mini Passenger Van 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Toyota Sienna
2012 Toyota Sienna
2013 Toyota Sienna
2014 Toyota Sienna
2015 Toyota Sienna
2016 Toyota Sienna
2017 Toyota Sienna
2018 Toyota Sienna
2019 Toyota Sienna
2020 Toyota Sienna
Tools you will need:
• Pry Bar trq.video/oadY...
• 10mm Socket trq.video/obT3...
• 17mm Socket trq.video/ocny...
• 21mm Socket
• 22mm Socket trq.video/ovp-...
• 30mm Socket
• Side Cutters
• Snap Ring Pliers
• Torque Wrench trq.video/obph...
• Gloves trq.video/obuN...
• Rust Penetrant
• Safety Glasses
• Floor Jack trq.video/oaHX...
• Hammer
• Jack Stands trq.video/oaub...
• Punch
Subscribe: / @trq
Check out our playlist:
Toyota Sienna 2011-2020 3rd Generation: • Toyota Sienna 2011-202...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@krystianweglarz]

Awesome and professional video. One recommendation would be to be careful, pressing the bearing out. For me, unfortunately I snapped the caliper, mounting bracket ear. Had to get a new steering knuckle.

[@ddk80]

After watching this video, it’s probably best I pay someone than tackle it myself.

[@garwindarsodhi4666]

Helpful!!

[@Vet-zj5lq]

What spray did you use? Thanks

[@nelsonhernandez2513]

You didn’t change the brake pads 😅