Use similar attachment in industry and I have one at home . Fantastic tool . I use different grits and have a ball valve up by trigger in the sand pickup line . Can control amount of abrasive and shut off and just wash . I use a high pressure soap injector on pressure washer with high alkaline laundry detergent . Coats and cleans and won’t rust .
@@jasonmurphy1587 just use cheap liquid laundry detergent . Coats bare steel when dry . You need a high pressure soap Injector on washer intake too pump . If you you use hot water pressure washer with sand blaster it’s even better .
I bought one couple weeks back and finally put to use on my 65 ford econoline. Now I I used the one from Northern tool and even another from some other place that looked very similar. But not sure what y’all do but this one out of the 3 is at least 40% better and I say at least. Yes its probably 100-150 more but you get the wand with it but the fact that its at least 2x better means , well you guessed it. YOU GET WHAT YOU PAY FOR. cheers 🍻
Good for cars and smaller projects..Not good for bigger projects like trailers.Also dry blasting makes paint stick better which is needed for trailer that are on the road 24/7.But for cars its good as it does not heat the metal.
We bought one of your systems, and its going through media SUPER fast, got the air inlet opened all the way, still going through alot of media, way more than 10lbs per minute. Any advice? Using 30-60 Black beauty, 4400psi 4gpm.
This depends on the GPM flow of your pressure washer. If it's around 4+, it will work better. If it's 3 or less, it would be quite slow. I've never tested the kit below 2500 @ 3.
Hi. Does this run through bags of sand super quick or is there a way to control the amount thats being injected? Also can i use glass blasting bags instead of sand bags?
Media use will depend on psi & gpm rates, but it will use aprox 10lbs for every full minute of "trigger on" time. During that time, it will strip 1 square foot of well adhered paint to bare steel. You can use pretty much any type of media, including glass bead. Best to test different types of media and see what works best for you.
The sandblast head creates a large amount of suction to pull the sand from the container, though your sand hose and into the head where it mixes with high pressure water and gets sent out through the carbide nozzle. Works great and won't clog.
Use similar attachment in industry and I have one at home . Fantastic tool . I use different grits and have a ball valve up by trigger in the sand pickup line . Can control amount of abrasive and shut off and just wash . I use a high pressure soap injector on pressure washer with high alkaline laundry detergent . Coats and cleans and won’t rust .
what Laundry detergent ?
@@jasonmurphy1587 just use cheap liquid laundry detergent . Coats bare steel when dry . You need a high pressure soap Injector on washer intake too pump . If you you use hot water pressure washer with sand blaster it’s even better .
I bought one couple weeks back and finally put to use on my 65 ford econoline. Now I I used the one from Northern tool and even another from some other place that looked very similar. But not sure what y’all do but this one out of the 3 is at least 40% better and I say at least. Yes its probably 100-150 more but you get the wand with it but the fact that its at least 2x better means , well you guessed it. YOU GET WHAT YOU PAY FOR. cheers 🍻
Thanks Pete!
Looks like it feeds the sand very well. Not like air systems, ,that are off an on all the time.
Good for cars and smaller projects..Not good for bigger projects like trailers.Also dry blasting makes paint stick better which is needed for trailer that are on the road 24/7.But for cars its good as it does not heat the metal.
We bought one of your systems, and its going through media SUPER fast, got the air inlet opened all the way, still going through alot of media, way more than 10lbs per minute. Any advice? Using 30-60 Black beauty, 4400psi 4gpm.
Bought it best thing ever sandblaster one full tractor in just 3 hours
Thanks for the great feedback!
Thanks for the great feedback!
What size media did you use?
@@colinward6796 medium crushed glass
@@5xgreentv33 thank you
Great Product! we sell the all the time at PSI!
Well that works! Great video, Thanks! A+++
My pressure washer just goes to 2,200psi, will this work at all? I know it wouldn't be this good but I it takes longer that's ok.
This depends on the GPM flow of your pressure washer. If it's around 4+, it will work better. If it's 3 or less, it would be quite slow. I've never tested the kit below 2500 @ 3.
Depends on the GPM of your pressure washer. If it's high (like 4 or 5 gpm), it will work. If it is 3 or lower, it won't work well.
I dont get it .what unit has to b used .where is the media?stored in..i can use?a?regural power washer?
How much is it $$
Can I just buy end without trigger
You can buy the same unit on Aliexpress for $20
Good job
Is this safe for fiberglass? Restoring a car.
I'd be hesitant on fiberglass. Maybe try a test area and experiment with different blasting abrasives.
how you protect it from flash rust?
You can use a product available online like Hold Tight 102.
Boa noite.
Como eu faço pra comprar este Kit de jateamento?
Moro no Brasil.
Podemos faturar com o paypal e enviar diretamente para você. Envie-nos um email para info@powereagleusa.com
Will this attachment remove parking lot lines? I have a 4000psi 4 GPM pressure washer. Thank you.
Probably kill the concrete with that pressure
Can this be used on classic car bodies ?
Absolutely!
Do you have the link for this product ?
www.powereagleusa.com/product/wet-sandblast-kit/
Hi. Does this run through bags of sand super quick or is there a way to control the amount thats being injected? Also can i use glass blasting bags instead of sand bags?
Media use will depend on psi & gpm rates, but it will use aprox 10lbs for every full minute of "trigger on" time. During that time, it will strip 1 square foot of well adhered paint to bare steel. You can use pretty much any type of media, including glass bead. Best to test different types of media and see what works best for you.
I like that head but is way to expensive for what it is
Does the nozzle adjust for a more concentrated or precise blast area?
No, the carbide nozzle is not adjustable
No air compressor needed ?? How generate pressor ?
With the waterblaster,the media is the part that cuts away at the rust etc
The sandblast head creates a large amount of suction to pull the sand from the container, though your sand hose and into the head where it mixes with high pressure water and gets sent out through the carbide nozzle. Works great and won't clog.
what is the minimum pressure Wash
We recommend 4 GPM or more and 3000-4000 PSI for best results. GPM is actually more important than PSI in this case.
Is there a limit max mesh size grit?
The coarser medias work better. 20-40 is best.
super.
Can this be bought in the uk ,if so where?
We ship direct to the UK. email info@powereagleusa.com for cost
Do you ship to the uk
Yes, we ship worldwide. Send us an email for a shipping quote info@powereagleusa.com
@@PowerEagleUSA have done thankyou my machine is 4000psi but 3.7 gpm will it still work
Yes, 3.7 at 4000 is going to work very well.
genial
find a way to reuse the water being wasted
It goes back into the ground and refills the aquifers. Water is a renewable resources it never leaves the planet