You can now purchase your very own Shakset front suspension from scootletsgo.com/product-category/sharkset-suspension-for-ninebot-max/, comes in yellow and a limited edition white.
super stuff! off to make a cup of tea and enjoy this. I'm so close to buying it. kinda worried about the rgb installation and connecting it to the console. super detailed as always. the rick shiels of escooters! love what you have done with pimpin it right up! only thing missing are bose speakers :D
I think my Sharkset stem came with the wrong screw hole at the top. It's facing the front instead of the right side :( Do you think that it's a defect or am I just reassemblying the stem wrong
It would be nice if you noted that the suspension you removed was not stock. I was staring at this and trying to figure out which crazy variant of the ninebot max you had.
My friend thank you so much for this video. I installed mine today and I'm really happy. Love it. Question where did you get the longer kickstand. The original one is too short lol thnx
Great to hear thank you. And yes you can pick up the longer kickstand. Go to the suspension link in the description and one of those links should have that available for you.
Your videos really help but my G30p Max was much different when I opened it up, firstly I couldn't unplug the main power coupler that you had shown previously. My concern is not being able to connect the RGB can I still make it run this way and or will I have wires sticking out?
Best video Thank you! I will use this as a guide. Can you make a video on how to change the springs? Is it as easy as unbolting the shocks from the swingarm and twisting off the knobs on top of the springs?
@@ScootLetsGo yea love it, didn't notice that there where no music until you mention it hahha but it is no need for music just in the beginning/ ending but anyways love it!
@11:50 About that the extra bit of cable with a plug that you tucked away inside the neck isn't seen again for the rest of the installation. You mentioned that we don't need that yet, but what is it really for?
It is for a next project from the Ninebot...! They want to add some lights on the sidewayS of the board...so they think in advance, and added another cable!
@@jmm03256 well sort of. My original motherboard broke and the new one I got has a connector but I have broken the led connector trying to fit it in the rear light connector
I’m having trouble taking the wheel nuts off, its very tight and doesn't loosen with the deep socket, 15mm that I have. The video is very quick at this part and I cant get anywhere. any help? I will have to buy vice grips I guess.
If it's your first time taking the wheel off, there is a lot of gunk holding it tight. Get someone to hold the scooter steady and put some weight into to taking it off.
Thx for Video 🙏 But now I hear the Sound and uff... How sounds on road ? Next Test After month in use to see rust or damages. Hope you will also review like the other one.
First result on the road for me was fine, no strange noises during rides, didn’t feel bumpy at all. In case you need more suspension you can just switch the springs to heavier ones ( 3 levels delivered and normally soft ones are already good till around 95/100kilo )
I managed to get it out for a test today and it sounds good on the road. You don’t bottom out much unless you are hitting every curb. But even then the sound isn’t really a thing. I also found turning the springs a little helps. As they tend to wanna flex a certain way and the sound you heard in the video was them against the plate at the bottom where it sits. So I just turned 180 degrees. I will have a review out once I’ve had a good play :).
Do you think Sharkset will do a rear suspension? I ordered this one (with your code ;) and I'm looking forward to getting it on. Do you think having rear as well is a must?
I really hope they will do a rear suspension on this. I thing it would be sweet. And thank you for using my code :). I think if your going to have front suspension. You may as well have the rear. It makes a difference. When you come off a curb or over really bad holes or drains without you still get that shock on the back
Hey, thank you. At this time I can't really comment on which is the best rear suspension, as I am waiting for the Sharkset rear suspension to come out. Then I will be able to let everyone know. :)
Hey bud! Hope all is well, im going to be purchasing this shock as soon as I return my Monorim V3 (worst suspension). However I feel I got the stem bolt screw mismatched while installing the Monorim shock. Does this shock come with a new stem screw? If not is there anyway I can buy that one screw?
Hey. That’s amazing. :) When you purchase. Please use my coupon code SCOOTLETSGO10$OFF to save $10. And it helps me out. Also it doesn’t come with the stem bolts. But you can buy them here with Kickmotion bit.ly/3mGm5U0 I look forward to seeing your thought on the suspension.
@@ScootLetsGo The issue seemed to come from this, yes. I screwed it with the scooter in height. By putting the wheel on the ground to raise the suspension and by screwing the central axle back, there is almost no more play. Thank you for your quick answers 👍
I want to install my shark set right now. and have installed a monorim mx1 for 2 weeks. My question is whether I can get my original oring up and down on the Shark again Have to take the handlebar? Sry my Englisch Do you understand what I mean ? Monorim supplies this aluminum ring for the top instead of the original course material ring. Do I need the originals at shark?
How does this feel with just a front suspension? I thought it was two but it’s a different brand on the back. Is it good with just one front suspension?
The only real issue I see, is with this setup's lack of a usable front fender. The designer of this unit gave very little attention or effort in the designing of a competent front fender that would provide approximately the same level of splash protection as the original. Other than this, the Sharkset does appear to rock.
I am driving this suspension now 2 days and in very rainy and snowy weather and I can tell you I had not 1 single splash on me ! So the front fender is working perfect !
I can confirm. Front fender is working perfectly in regards to splashes. One remark about the top of the fender is that the plastic breaks easily. It's very stiff but it breaks fast. Mr Loctite to the rescue.
@@ScootLetsGo This is a point that should be made known to your listeners during your evaluation. You don't seem to compromise in your tests and I hope it will continue for the following ones because that's what I like about your channel.
You can now purchase your very own Shakset front suspension from scootletsgo.com/product-category/sharkset-suspension-for-ninebot-max/, comes in yellow and a limited edition white.
Super video, tx! We can install shark-suspension on a Ninebot g3od 2?
Looks fabulous
Thanks
super stuff! off to make a cup of tea and enjoy this. I'm so close to buying it. kinda worried about the rgb installation and connecting it to the console.
super detailed as always. the rick shiels of escooters! love what you have done with pimpin it right up! only thing missing are bose speakers :D
Haha thanks dude, means a lot.
Don’t be worried about the RGB installation. Once you get everything in order it’s super simple :).
Oh and I’m not sure I wanna put speakers on there. Haha.
I’d like to have a external battery. But that’s no most expensive mod yet
Hey mate, just a quick one with aligning the hub cover for the brakes.. how did you get rhe cover off of the wheel assembly?
It comes with RGB remote, that is awesome!
Yes it does. :).
Well done bud,hope it works well when you get it out.
Thank you :).
very good video. Is there anything similar for Aerlang h6??
Love the vids, can you please review the sharkset suspension and compare performance comparisons with other front suspensions you have tried?
Absolutely. :)
I think my Sharkset stem came with the wrong screw hole at the top.
It's facing the front instead of the right side :(
Do you think that it's a defect or am I just reassemblying the stem wrong
I believe this crew is not really necessary. But if it does bother you, please contact the retailer you bought the set from.
It would be nice if you noted that the suspension you removed was not stock. I was staring at this and trying to figure out which crazy variant of the ninebot max you had.
My friend thank you so much for this video. I installed mine today and I'm really happy. Love it. Question where did you get the longer kickstand. The original one is too short lol thnx
Great to hear thank you. And yes you can pick up the longer kickstand.
Go to the suspension link in the description and one of those links should have that available for you.
@@ScootLetsGo Awesome thank you for the quick response. Keep the videos going we appreciate them
No problem. :).
Any suggestions to what you wanna see next?
@@ScootLetsGo Sharkset products like rear suspension or new items
Be awhile before Sharkset do anything haha
Your videos really help but my G30p Max was much different when I opened it up, firstly I couldn't unplug the main power coupler that you had shown previously. My concern is not being able to connect the RGB can I still make it run this way and or will I have wires sticking out?
Very good video, thx :)
And my Sharkset is finish :)
You’re welcome
Amazing pro-video ! Thanks :-))
Thanks glad you liked :). Great to see your videos too :)
Hello just found ur videos !! Would like to ask if they make this front set up for the F-30 kick start ninebot!!????
Best video Thank you! I will use this as a guide. Can you make a video on how to change the springs? Is it as easy as unbolting the shocks from the swingarm and twisting off the knobs on top of the springs?
Thanks dude.
Yeah I will do a video in the springs. :).
I believe they are very easy.
That was fast!😮🤩
Gotta beat the rest ;).
Hope you like?
What do you think without the music. Do I keep this format?
@@ScootLetsGo yea love it, didn't notice that there where no music until you mention it hahha but it is no need for music just in the beginning/ ending but anyways love it!
Thank you :)
I'm almost done just don't have a place to connect my LED cable! Please help
I'm intersted in the suspension but not the rgb aspect. Is it possible to just not bother with the lighting?
It comes with the RGB in the kit. And you desire if you want to install that on there or not
@11:50
About that the extra bit of cable with a plug that you tucked away inside the neck isn't seen again for the rest of the installation.
You mentioned that we don't need that yet, but what is it really for?
It is for a next project from the Ninebot...! They want to add some lights on the sidewayS of the board...so they think in advance, and added another cable!
i cant connect the suspension. i dont have any connector what do i do help
Same here I don't have a open place to connect my LED
Did you ever figure it out?
@@jmm03256 well sort of. My original motherboard broke and the new one I got has a connector but I have broken the led connector trying to fit it in the rear light connector
I’m having trouble taking the wheel nuts off, its very tight and doesn't loosen with the deep socket, 15mm that I have. The video is very quick at this part and I cant get anywhere. any help? I will have to buy vice grips I guess.
If it's your first time taking the wheel off, there is a lot of gunk holding it tight. Get someone to hold the scooter steady and put some weight into to taking it off.
Would this suspension fit on a bolzzen magneto?
will I have an issue installing this if I am using an external battery? I already have the external battery wire running through the stem
Thx for Video 🙏
But now I hear the Sound and uff... How sounds on road ?
Next Test After month in use to see rust or damages.
Hope you will also review like the other one.
First result on the road for me was fine, no strange noises during rides, didn’t feel bumpy at all. In case you need more suspension you can just switch the springs to heavier ones ( 3 levels delivered and normally soft ones are already good till around 95/100kilo )
I managed to get it out for a test today and it sounds good on the road. You don’t bottom out much unless you are hitting every curb.
But even then the sound isn’t really a thing. I also found turning the springs a little helps. As they tend to wanna flex a certain way and the sound you heard in the video was them against the plate at the bottom where it sits.
So I just turned 180 degrees.
I will have a review out once I’ve had a good play :).
Did you have to use a spacer on the none brake side of the wheel?
No spacer required
Do you think Sharkset will do a rear suspension? I ordered this one (with your code ;) and I'm looking forward to getting it on. Do you think having rear as well is a must?
I really hope they will do a rear suspension on this. I thing it would be sweet.
And thank you for using my code :).
I think if your going to have front suspension. You may as well have the rear. It makes a difference. When you come off a curb or over really bad holes or drains without you still get that shock on the back
Can I ask you about this big handle on a steering wheel? What it is for?
Great video man 🙏🏼 which rear suspension can you recommend?
Hey, thank you.
At this time I can't really comment on which is the best rear suspension, as I am waiting for the Sharkset rear suspension to come out. Then I will be able to let everyone know. :)
@@ScootLetsGo ok thanks
My no.1 question is, why do Xiaomi, Ninebot or whatever don't roll out scooters with suspension in stock?
Keeps cost down. They mass produce and it’s just one more part to add complexity and cost
@@ScootLetsGo True. Yet I went for a more expensive one after having Xiaomi (no stock suspension) since it had shock absorbers in stock.
Hey bud! Hope all is well, im going to be purchasing this shock as soon as I return my Monorim V3 (worst suspension). However I feel I got the stem bolt screw mismatched while installing the Monorim shock. Does this shock come with a new stem screw? If not is there anyway I can buy that one screw?
Hey. That’s amazing. :)
When you purchase. Please use my coupon code SCOOTLETSGO10$OFF to save $10. And it helps me out.
Also it doesn’t come with the stem bolts. But you can buy them here with Kickmotion bit.ly/3mGm5U0
I look forward to seeing your thought on the suspension.
I have the Monorim V3 and installation was a pain and no matter what rings i used thre is still a slight wobble. Hoping this shark set is better
can u skip the led install? i feel like it isn’t so effective, and figured i would save time on it
You can. There’s no need to install the LED’s
@@ScootLetsGo oh okay thanks, do you think there's a big difference between the sharkset and the fork one you previously used?
does it save your rgb setting when shutting the sooter off and on?
I found that mine comes back on to the setting I left it on. However, I’m not sure if you have the German variant that it would be the same
Are the lights optional to install or have to be installed?
They are optional
What was wrong with the first suspension kit you had installed ?
Nothing wrong really, just wanted this one for better looks and features. Also Sharkset is more comfortable.
Do you have a “how tô” vídeo for Xiaomi m365 pro 2?
Sorry I don’t. Maybe time for me to get one of these scooters
Hi, I installed it and I have a little play on the stem which caused it to move back and forth. Does anyone have any advice on how to fix this please?
Have you tightened down the centre screw enough?
Maybe use threadlocker too to help
@@ScootLetsGo The issue seemed to come from this, yes. I screwed it with the scooter in height. By putting the wheel on the ground to raise the suspension and by screwing the central axle back, there is almost no more play. Thank you for your quick answers 👍
U would have a lot of subs if more ppl new about u
It’s getting more people to know about me haha. I’m in all the groups ;)
What that blue blinking indicator on the battery means?
This is the bms. I believe it indicates all is normal with the battery
@@ScootLetsGo What voltage that socket gives?
I’m not fully sure. But I think it’s around 5v as most LEDs need that to work.
But current is around 700mah
I want to install my shark set right now. and have installed a monorim mx1 for 2 weeks. My question is whether I can get my original oring up and down on the Shark again Have to take the handlebar?
Sry my Englisch Do you understand what I mean ? Monorim supplies this aluminum ring for the top instead of the original course material ring. Do I need the originals at shark?
Can you please head over to Instagram follow and send me pictures :)
Please give me your insta or facebook name!
There’s a link in the description. Or search scootletsgo :)
OK sent you pictures
you should use original Ninebot's O rings (stack rings).
does it affect your balance on the scooter when riding it?
Not at all :).
How does this feel with just a front suspension? I thought it was two but it’s a different brand on the back. Is it good with just one front suspension?
The front end feels awesome. I know different brands make a difference. The back could use some tweaking. However. It’s better then no suspension
Scoot, Let's Go! Ok thank you I’ll be getting one soon enough
Scoot, Let's Go! I ordered one just now how long is delivery to UK
Where did you buy it from? If aliexpress this could take a few weeks to around a month. But be prepared to wait longer as of the border issues
If Sharkset I got mine in less than a week.
shame it doesnt have much of a mudguard and rear suspension too
Yeah the rear suspension mudguard, needs a little more, but it's cheap. You can always fashion something to extend it. :)
How much did it cost that time when you got it?
I think I paid around £180
@@ScootLetsGo oh.. happily price dropped now. thanks.
It’s great that it’s coming down for everyone :)
@@ScootLetsGo what about that chinese cheap Rear suspension- do you think it is safe enough to use daily?
What type of suspension you have on rear / back ??
It’s a generic variant no brand.
You can see here. ua-cam.com/video/M4dY_AK0WOc/v-deo.html. I believe I put link in the description:)
@@ScootLetsGo thank you
No problem 😉
The only real issue I see, is with this setup's lack of a usable front fender.
The designer of this unit gave very little attention or effort in the designing of a competent front fender that would provide approximately the same level of splash protection as the original.
Other than this, the Sharkset does appear to rock.
I am driving this suspension now 2 days and in very rainy and snowy weather and I can tell you I had not 1 single splash on me ! So the front fender is working perfect !
This is great news :)
@@kevinp4782 I find that hard to believe, but if what you state is accurate then great to hear.
I can confirm. Front fender is working perfectly in regards to splashes. One remark about the top of the fender is that the plastic breaks easily. It's very stiff but it breaks fast. Mr Loctite to the rescue.
The mudguard seems far too high and small to provide effective protection against water and mud splashes.
That front part of the mudguard is mainly for styling. But it does help. I’ve had it out with a little rain and it does keep the water off my feet.
@@ScootLetsGo This is a point that should be made known to your listeners during your evaluation. You don't seem to compromise in your tests and I hope it will continue for the following ones because that's what I like about your channel.
@@yAuMe7569 I’m working on an review. This will be factored in. :)
It’s still early days and there is much to be learned.
No sharkset in stock
There will be soon. Keep an eye out
In stock now...I just ordered
Really expensive 😭😭😭😭👎👎👎👎👎👎👎
I think it’s actually a good price for what you get
It is worth every dollar ...
180 quid wtf you can get 1 of these scooters second hand for 250
Well taking into consideration currency conversion this is around £140.
And I’m yet to see a Ninebot Max for less that £500 here
coole sache schau mal hier Xiaomi 1s E-Scooter upgrade Tuning 4.0