Відео

Auf dem Teppich klar😅😅😅

Porgamar mono patin

Surprised you haven't put a second motor and a custom built battery to fit inside the deck. You got the perfect suspension to make that happen. I got a 14S8P battery with two controllers inside mine. With 58V instead of 42, your top speed shoots up, the motors don't work as hard because there are 2 instead of 1 and adding 2 extra parallel cells means you have an extra 28 batteries on top of the higher voltage so the range increases also. Of course, you can keep it at 6 cells in parallel and do 19s6p for an 80v setup, if you're crazy, but your range suffers and who needs to go that fast on a scooter. You already have enough cells for a 13s6p, you're 32 batteries and a motor away from getting it done. You won't have to have an external bag, everything is inside the deck I'd say it's worth it. Only thing left to upgrade at that point is a steering damper, you'll want one of those for sure but not essential. It does take some time to get it done and electrical know how but the videos are all available, it's just a matter of effort for someone like you. The learning alone will also benefit your kid(s) in ways you don't even imagine. A spot welder is a matter of finding an old microwave also, you can rig it up in a day if you just use it for one battery. THINK ABOUT IT

The music in the background is way too calm for what’s going on in the video

It stayed on 27kmu for me

I just brought one.. I'm thinking of adding the front suspension and the rear. Thank you for the videos man!! 🙏

Can anyone link me to a video where they install a new brake cable and housing into the kqi3 please ? Cant find one anywhere

Can you please provide a link where the brake rotor can be purchased?

that is scetchy af

Hey is there a way to adjust how hard the suspension is ? I bought one but it barely goes down (it’s to hard )

front suspension link is dead

Hello, can you please show me how to adjust the brakes only, thank you

I’ve brought one of those but I want to increase the speed would you know how to

excellent video, but wow so difficult so hard pull out of rim and put on the new tire !!! well toyday im learn something new !!! thank you

Makes a difference w 10” tyres

Everything I've read said NO wd-40 products

8:11

How did you remove the brake cable from the handle?? This is the only thing I need but nobody shows how to do it and you cut it out of your video.

Your videos really help but my G30p Max was much different when I opened it up, firstly I couldn't unplug the main power coupler that you had shown previously. My concern is not being able to connect the RGB can I still make it run this way and or will I have wires sticking out?

Is there any better ways you can get the tires off? I did all the wires part but I can’t get the tires off

The length of the new cable?

Thanks for the help I love that work bench by Ikea, I have the same model. I paid C$10 before Covid and now they sell today for C$15. I think I'm going to get a Sharkset front suspension instead of a Monorim, any thoughts on latest versions? I picked up the Ulip suspension with large brake light and signal lights. It conflicted with the Ninebot Max G30p and would only work when the headlamp was on. And when I turned off the headlamp I was then left with no brake light or signals unless I shut the scooter completely off for 10-20mins. In the end I threw away the Signal/Mode selector and bought a Ulip Signals Lights set and then got both my brake light and signals to work properly (and seperate from each other). Have A Good-Day...eh!!!

708 Judy Curve

Oh goshhh! You are so natural!!! How did you do the introoooo.

Hello i need to replace the disk brake, i must do all this? The cables? Or just the whell

thank You!!!

Dove trovo il tasto reset

Thank you, Im gonna give this a try, mines been shaking like crazy

What happened to Kickmotion? I need to order that front bolt set as mine has just snapped a couple of days ago. All i can find is poor quality ones with bad reviews on Amazon. I had a really good experience with Kickmotion, and hope they are not out of business :/

If you don't have a high pressure pump simply use a co2 pump and works for me every time

Can you try the rear too?

My issue is the little plastic locking device thing, it pops our as the scooter goes over bumps. Anyone know how to secure that?

What is the part that you are holding and pushing up on at 1:28?

Would I be able to change the kqi2 motor wheel for a kqi3 max motor wheel for more power?

You can get a virus from the website. Bcs my phone is telling me that is a virus

Hamari scooter battery wala iPhone data recovery

Is it the same method for the e2 pro because i have the same problem ?

I appreciate you pointing out the size the bolts are. Most other guides forget to mention that, even the official one from segway.

Ok id like to update......the actual dismantling of the scooter was easy enough....and i used a heat gun instead of a hair dryer ...All basic tools then...I've taken off the tyre easy enough and a friend of mine will put the new tyre on at his garage because i cannot be bothered to struggle with the new tyre ....The tyree i actually bought isnt the best quality like the original so ive purchased a thicker and better quality tyre for the next removal in the future. Its not as bad as it looks guys ..this video made it alot easier .

I have something to update now I have had received a flat I've attempted to repair the hole with the tubeless repair kit ....It worked for about 2 days of normal use . I believe three tyres are of low quality rubber ...the hole was the smallest and it seemed to be easily punctured ....I recommend a change of tyre maybe switch to self healing tyre or solid like they have put in the nui q air ....This process to remove the back tyre is ridiculous.. I'm using this video on the weekend to put my spare tyre on then I'll be purchasing solid tyres for the future .

I used to change tires for a living as a young lad. I notice you didn't lubricant the tire before mounting the tire. Great suggestion, you can use petroleum jelly around the bead of the tire. It'll help getting the tire into the rim and seal. Once you get the air in

Robinson Linda Thompson Barbara Lee Anthony

Thomas Eric Brown Kimberly Thompson Carol

THIS VIDEO IS THE WORST. Do NOT try to do this yourself! It is not worth your time or the parts you need to purchase. Take it to your local scooter repair shop. For anyone in the LA area I recommend Rogue Scooters they saved my life after wasting so many pointless and costly hours on the poor advice in this video.

There is not much dexterity. good luck

so 10s to 13s? as 12.4 or 12.6v is 4.2v x 3. with a series connector

Got a flat on my front tire. Tried to remove it from the rim using this method but it seems to be glued to the rim. Doesn't matter how hard I press the sides together, the tire does not get loose from the inside of the rim which makes it impossible to get the tool between the tire and the rim.

Can you show how to adjust the rear brakes? Mine squeals in the rear disc

What app a is it

hello Güncellemeden sonra seri numaramı orijinal numarayla değiştiremiyorum, ne yapmalıyım?