Це відео не доступне.
Перепрошуємо.
Pressure Washer Won't Start - How to remove and replace a carb on a Troy Bilt Pressure Washer!
Вставка
- Опубліковано 28 кві 2020
- Pressure Washer Won't Start - How to remove and replace a carb on a Troy Bilt Pressure Washer!
My pressure washer has sat up for a few years, so my wife asked me to get it running.
I figured it was not starting because of the carb, so I bought a brand new car for under $20. This is the install...
This is the carb I purchased; geni.us/uqVM4o
I am an Amazon Affiliate, if you purchase through one of my links I may receive a small commission at no cost to you.
If you have any questions, please put them in the comments.
Follow my Instagram: / mytorinoyt
NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, in this video. My Torino makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.
DISCLAIMER OF LIABILITY: My Torino specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of any of the information or content in this video. My Torino recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. My Torino assumes or undertakes NO LIABILITY for any loss or damage suffered as a result of the use, misuse or reliance on the information and content of this video.
USE AT YOUR OWN RISK: This video is for informational purposes only. It is your responsibility to evaluate your own safety and physical condition, or that of your clients, and to independently determine whether to perform, use or adapt any of the information or content in this video. Any automotive repair and/or modification may result in injury. By voluntarily undertaking any task displayed in this video, you assume the risk of any resulting injury; your safety is the sole responsibility of the user and not My Torino.
Thank you, successfully swapped one today with your help. Nice when informative videos stay up and can keep helping. Nicely done, sir.
I changed out mine and didn't note where the hooked wire connector went. This helped! Thanks.
Great video. Thanks for walking me through this one.
The only thing that you didn't show me was the top view of the carb after it was installed so I could see how All the linkages were supposed to be positioned
Thanks, just what I needed to see. Spent 2 days trying to get my machine to work. Going to replace my carburetor as soon as I can get one in.
Glad to see it up and running.Just replaced my carb on my generator. Cheaper to buy a brand new carb than to rebuild the old one!
Thanks for the video. Mine sat for a few years and couldn't get it to start. Bought a new carb off Amazon for $15. Swapped the carb out and it started on the first pull.
Glad I could help..👍🏻👍🏻👍🏻
Just what I needed! Did not see you take off the spring you put back on the new one.
Thank you for showing me how to change the carburetor. I'm not as mechanic. But I think ordering a new Carburator I as the way to go. And I'm going to give it a try instead of taking it to the local repair shop as d waiting 4 weeks to get it back and costing over $50.00. Thank you.
Thank you for giving me the confidence to attempt this repair. Keep up the good work.
Thanks for sharing
Excellent instruction. PW now runs like a top. Thanks!
Glad I could help. Thanks for watching.
Great vid. Replacing mine this weekend. Thanks 🙏
thanks got mine replaced with no problems
jim
Thanks for sharing this video, I did the exact thing of letting it sit and the gasoline evaporated. I'm going to buy a carburetor instead of cleaning the rest out. I already cleaned the bolt where the float and nothing. After hearing the price I've made up my mind.
Yep. It was a well spent $20. Thanks for watching..
Thank you
Suler helpful! Thanks!.Do you know the spark plug gap number?
Thanks you
No licensing fees paid!! Pretty sure on that.
on amazon this is part number 591597 (briggs and Stratton engine 190cc {troy bilt mower}. the old carb was 590780 (on gasket flange). exact same carb.
Great job! Thank you.
What is the hose thats in the air cleaner .It had a Lipped end that i cut ..oops. thinking it just slid in .
notice the bolts holding the carb on has a star in the head the star takes the back bolt of much eaiser
When you first cranked it up, something shot out at the camera. Was that part of the carburetor? Also, it looked like the gasket between the carburetor and the engine had rotated out of place before you screwed it together. Did that create any kind of leaks for you?
Thanks!
The carburetor you purchased may not be right for my Troy-Bilt pressure washer. How to buy the right one.
Regarding buying this carburetor on the internet when Troy-Bilt does not sell you but wants to sell the whole assembly at a significantly higher price. So buying the way you did is a good idea.
Look for the serial number on the motor. Use that on the troybuilt website, and it should have a parts breakdown for your unit. Look for the carburetor, and then you will have the part number. Then put the part number into Amazon. It should then come up with multiple sellers.
I cleaned the Tank, Carburetor, added fresh fuel, and no spring just like the video added spring and just like the video one pull. THIS NEVER HAPPENS. One pull still amazed.
Great video. Thank. Your incorrect spark plug goes to show nothing is for free!
what the screw at side top of carb looks like a just screw what it for
Thanks 💪🏻🙏🏻
Glad I could help.
How to buy the carburetor for your own Troy-Bilt pressure washer. So far no luck.
Part number?
Would have been a nice video if your hands didn’t block every single step. Maybe you should have recorded it from the side. Thanks anyway.