3D print toys Glock17 blowback （Ender 5 s1）
Вставка
- Опубліковано 18 тра 2023
- If you like my video please help me like and share Click to subscribe and small bell. thank you. : )
Purchase link ：
bingdelengku.github.io/
cults3d.com/en/users/zvc0430/...
A lot of people ask me where to buy the spring. Amazon sells it. Then there are some self-made ones.
I write down the web address below.
There are some tools I use.
3D printer
Ender 3
amzn.to/2yVr9Q3
Filament
amzn.to/3PSSYtQ
akm screw
amzn.to/2Bahaag
spring kit
amzn.to/43pyHUs
spring wire
amzn.to/2Lt59yE
drill 1mm-13mm
amzn.to/2WxAsyR
file
amzn.to/36ZKCuL
#zvc #3d printing #3d printed - Навчання та стиль
This is exactly what I want for Christmas better put this on my list😂
Would really love to see you make a cheytac m200 I'm buying a 3d printer this weekend because of this channel so just wanted to thank you for all your hard work and videos
thank u for ur support 🙏
Use the suppressor on the blowback glock
that's pretty good! I'll see if I can get the grenade.
dammit cults doesn't accept gift cards
Love this! Does the file include the BOM?
This is si cool, for making shorts film would be great just get someone that works in aftereffects and boom. Just need a more partes shearing across difernt models.
hola el video está muy bueno Excelente:
🤜🤛👍👊💪👌
😉🙏thank u for ur support
Please make a pkm
Awesome videos and amazing prints! My ONLY issue is you display spring sizes in Metric but post the link for spring kits that are in SAE, adds a little confusion to those who don't how to convert or adds extra time to convert. Would love to see the ACTUAL springs you are using from the kits shared to make the tutorial a little easier to follow for exact fits.
There are many small springs that cannot be purchased online. So I marked the dimensions of all springs in video. Can only be purchased offline 🙏
You have to be a genius if you can think of it and even make it.
🙏 thx
Hey I had a few questions
1. Will this print work with an ultimaker s5 - if so, what settings are most optimal
2. Is there a way you can add a rail underneath the barrel for a laser/flash light?
1.I have not used ultimaker s5. But I think the parameters are almost the same. layer height 0.15 speed 50 fill 40% temperature 190 pla
2. I made accessories for the flashlight
I love your videos.
It would be nice though to see a more barebone/simpler design as well like old pistols from the late 1800s early 1900s
like the Brun Latrige.
😉🙏thank u for ur support
@@zvc_3DPrint make the Thompson blowback
I really love the video and i wonder that 3D printer you are using! And can you also make a open carry holster for the glock or other guns?
says it in the title of the video lolz
Currently making gun holsters 😉
YESSS GUN HOLSTER! I'ma sub so i can see how good it looks! I already made Mag pouch.
Question 1. When you first install the maganize into the empty gun, are you able to manually pull the slider back to load that first shell into the chamber or do you need to pull the trigger?
Question 2. Are we able to replace the 3D printed maganize spring with a normal metal spring if it's big enough for it?
1 no 2 Springs cannot be used with too much force.
Can you pull the slide back if you hold the trigger?@@zvc_3DPrint
Can you pull the slide back if you hold the trigger?@@zvc_3DPrint
was wondering if you ever plan on making single breach loaded rifles like Martini Henry? would love to be able to either print or buy the product in order to make it into airsoft weapon
There is no such plan in the near future.🙏
@@zvc_3DPrint aww.... would've been great tho. thanks
Please bro. Make a mk4 ruger
I bought it, and it's printing at this moment!!! 🤩
thank u for ur support🙏🏻
it doesn’t work, l don’t know what I did wrong 😢
@@etaymizrahi Take a video and send it to me.
@@zvc_3DPrint where
@@etaymizrahi zvc0430@gmail.com
Hello zvc, in the cults description, it says that it's made up using PLA filament, but can it be another one or this makes a difference in the project itself?(completely new to 3D print, if this information is useful)
I know I am not the guy you're talking to but I have experience with 3D printing, It depends on what filament it is you're talking about, Because PLA is a hard material, And for Example TPU is a rubber like material And is not gonna work. what filament are you trying to print with?
@@etaymizrahi my apologies, in fact, i am still considering the possibility on entering on this segment when I told that i was completely new, but about the question, i was thinking of a more hard and also durable filament, like ASA, since I was told that PLA is not durable due to being biodegradable, hence causing a lifespan of around 6 months from what I heard.
@@JFM4 I have prints from two years ago that are made from PLA, they look exactly the same and are still durable as before 2 years ago, so I think it’s safe to go with PLA.
pla is cheap and environmentally friendly. Is the most commonly used printing material.
Bạn làm khẩu súng ump trong game free frie đi 😂😂
To make the springs for things like this video would I have to first print the spring creation tools that you made a video on a while ago, or what ways can I make or get the springs?
It is recommended to buy ready-made springs directly🙏
So are all of the springs I need in the spring kit in your description?
no. There are some particularly small springs that need to be purchased in physical stores
I need to know how to make the kar98k magazine spring with the hair pins to do you do it
ua-cam.com/video/86AzegdAbBY/v-deo.html 3:40 Use heat shrink tubing and glue
yo i need one
Once again, awesome design. I have a question though: are there any parts that need to be replaced often? For example, this printed spring in a magazine doesn't look like it would hold tension for very long
Yes, the durability of the printed spring is not high.The durability of other parts is quite good.
@@zvc_3DPrintcan put real upper, can it handle.
@@zvc_3DPrint That being said, Can I use a real spring for the Mag?
Metal springs can be used, but the wire diameter cannot be too thick. About 0.6-0.7mmMetal springs can be used@@gusarg81
Hello, i have your model right now, but the magazine spring always broke while taking the model out how much it needs to fill the spring? How much durability should it have in 100 percent? @@zvc_3DPrint
So cool, can you make an electric version that fires full auto, with motor and batteries, doesn't matter if casings get ejected or not (who wants to be constantly picking them up from the floor anyways Lol).
Please, please, pretty please :)
That's called an airsoft gun lol
@@truedemoknight6784 kinda, but without needing any green gas or CO2 or picking someone’s eye out by accident 😄
That would require a lot of non-printed parts
look up an aeg
Need a better trigger
try to make CZ P10
I like your 3D design and complete assembled all part printed then tried so many times but the slide does not return back when trigger pulled, do you have solution to fix it ?
mail me 🤔
Where can I get the spring found at 2:25? It is not included in the spring kit on Amazon that you linked.
Many small springs can only be purchased in physical stores.
Also have you ever considered making a blowback AKM?
will be made future.🙏
Hi I was wondering what rubber bands to use
The most common rubber band. Dimensions are marked in the video.
I have some thoughts about buying this but i do want to know 2 things first how many bullets can a mag have in it and second will there be accesories for it in the future
And also would it be possible to just use shells then the whole bullet
How many bullets can be loaded depends on the spring. I think it can be 8-10 at most
K thank you
Is there any way to make the blowback work with the mag inside but with no bullets?
Very simple. Remove magazine spring.
@@zvc_3DPrint thanks
For the springs in this vid can I print them or is there a large pack of springs I can get, or do I have to buy them individually?
Spring needs to be prepared by yourself
@@zvc_3DPrint Ok so I would have to 3D print a spring twister such as the one you showed in your spring creation video?
@@user-lf5re3nj2t I don't have springs and such small springs are very expensive, so I made my own springs from springs I stole from ballpoint pens and wrap them new around a toothpick. ^^
For other Springs I just just rubber bands.
Dear zvc 3D Print, where do i find the springs and rubberbands
Very small springs may require hardware store purchases
Question: How many rounds can it hold in the mag?
If printing springs are used, 3-4 can be placed. If the spring is suitable, more bullets can be inserted.
How to make the springs for the kar 98k brcause i dont know if i should glue the hairpins or what
98k mag spring ?
Yes for the part where you used hair pins for the magazine when you pull back the bolt how do you make the spring for the new bullet to be moved in to the chamber
damn i want one of these but i struggle making 2 parts fit together, let alone all these parts :D Which one would you say is the easiest to build to start off? Im thinking Glock or Colt to start off with.
hi the mp5 is a good for beginner .
It's all pretty simple 🤔
@@zvc_3DPrint i agree with adam . its the file transfer can change a little from 0.10 mm to 1 mm diff .so some parts needs to be adjusted . you can do that in TC .
@@EDP1 I'm currently building this with an Ender3 (the very first version of it).
The Creality Slicer is s*** tbh, but with the Prusa Slicer I printed everything with supports on the 0.1mm profile and a 3-Line Brim.
Smaller parts like the rods i printed 100% filled on a raft and used pliers and files to adjust them. So this works fine but I don't have springs and such small springs are very expensive, so I made my own springs from springs I stole from ballpoint pens and wrap them new around a toothpick. ^^
For other Springs I just just rubber bands.
@@zvc_3DPrint where do i find the blue pri t files I new to printing
printing on kingroom, its doing good, the grip will be harder so, can i send a video?
This printer handle but you need glue and sup
Could you make an HK G3A3 or PTR-91 ( PTR-91 is a licensed copy of the G3A3)
sorry no plans for that at the moment.
@@zvc_3DPrint alright :)
Hi if i buy glock17 blowback will i get the accesories flashlight and suppressor? or do i need to buy the other glock too?
Silencer cannot be installed in the blowback version of Glock
i bouth the folder .i notest there are two mag springs in the folder.bolt looks desame .
Send me a screenshot. 🙏
heydud ei have the same printer but not quite getting the results u are am i able to see ur printer settings
You can send me a screenshot of your purchase. I'll send you a video of my printer's Settings.
zvc0430@gmail.com
How big is the rubber band supposed to be?
The size is explained in the video 😉
hi ,i bought this model but i cant seem to find the spring part for the mag in Minute 0:44 of the Video the top left corner spring . where do i get this?
Where did you buy it ?
Was this a reupload?
yep trademark complaint
Hi, I just bought this yesterday. Why you don't add a text file with all the details of the extra parts? Like Springs, Wires, etc etc etc... Only STL files without anything else...
The required metal parts are marked in the video.
@@zvc_3DPrint Exactly, but should be in a Text, Info file as well. Also, a explanation of correct way to place the parts in the Slicer, because not all STL files are in the correct place/position.
@@gusarg81 ua-cam.com/channels/yhtALQ6UMyhRgxaG74D7LA.htmlcommunity?lb=UgkxfaMi7de4YsJw_gdXhsXKlzqo8oUZcb8k Here is a picture showing how stl should be placed.
Can we have a stg 44 or a g43 blow back
maybe future 🙏
Can do a fn 57 pls
Sorry, there is no such plan in the near future 🙏
@@zvc_3DPrint what’s your next print gonna be
Can I print this in a resin printer?
I haven't used a resin printer, but I guess it would work.
What's with the blur?
trademark complaint
wich 3D printer do you use
I have several printers. So there is no way to say which printer was used to print which model. ender 3 ender 5 s1 k1
Instead of ejecting bullets, is there any model of firing with blowback type
It's quite difficult because the force is not enough.
@@zvc_3DPrint it's ok just as a toy only ,& you can try better springs rather than rubber-band's springs might give better force.
Yes, I will try in the future.@@user-vm1xj2bb8p
will you planing to make some soviet gun?
maybe future
Why is it blured
trademark complaint
is this printble on a ender3 pro ?
ender 3 is enough 😉
Are there in files or anything that is for this trying to get in to 3d printing
cults3d.com/en/users/zvc0430/3d-models
bingdelengku.github.io/
What's up with the blurring?
Trademark complaint😮💨
@@zvc_3DPrint Ah, that sucks. Also, I love ur vids
Can i use your plan with any 3d printer ? Thanl you i am new in thia
As long as the size is big enough.
Printed this but it is so hard to get the parts to fit
You can take a video of the hardships you have encountered and send it to me.
Could you schow us wich pieces need support and if they need tree or normal support?
@@zvc_3DPrintsome supports really destroyed my prints
@@matteofranz09 I am using automatic support at 2mm and 45 degrees
Try to make the walther lp53 (airsoft gun) (sean connery 007 gun)
How many grams does it weigh?
about 500
Is the mag double stacked?
yep
@@zvc_3DPrint man you are really good at this
Can you make Glock-36?
maybe future🥲
Ay bro Your project didn't finish yet?
Yeah, there's been a lot going on lately. So there wasn't much time to make a model. There will be a little update next week.😵💫
@@zvc_3DPrint Hiii ZVC 3D Print this is PLA,PETG,ABS, or PLA+ ????
@@Statistics2009 pla
@@zvc_3DPrint how many wall height and infill?
How the fuck have you managed to make a fully working blowback ejecting prop with just some plastic, springs and rubber bands? o.O
😅🙏
Hiii ZVC 3D Print this is PLA,PETG,ABS, or PLA+ ????
pla
@@zvc_3DPrint is it 0.2mm? And what about the infill?
@@Statistics2009 0.4mm infill 30-40%
How do I get the printed spring files?
This model includes spring files
I bought the 3D Cults one linked in the description and it didn't have the spring for the mag but I found one somewhere else@@zvc_3DPrint
@@DrowningLemon mag_5 is what you want
why did you blur part of gun is it illegal
Trademark complaint
Ohhh that makes ok lol thank you I was curious I might 3d print this some times@@zvc_3DPrint
time*
Is there any alternative to these springs? 1:26
The spring doesn't have to be the same size. After you print the model, you can see what kind of spring you need.
@@zvc_3DPrint okay thanks
@@zvc_3DPrint oh, model it's paid, and that's not enough. Then I don't need to buy springs anymore
сделай ак-47 blowback пожалуйста
will be made future😉
do u sell these model ?
yep but only sell stl file🙏🏻
Has anyone brought this and has built it, does it work ?
I have buy it and build it, my doesn't work. The " Schlitten" (i don't know the englisch word) move only half way back. I use the same springs, but it doesn't work like on the video. Only difference is, i have use Petg not pla.
@@markushuber1942 slide
我是中国的，可以购买吗？
What up with that blur, copyright or smt?
is a trademark complaint☹
@@zvc_3DPrint Oh ok (sorry i am late)
bro I'm not sure but I think China is using your idea for business
i will pay you to make me one
e
thank u for ur support 😉
Can I use real bullets?
no
Can you make a ruger 57
maybe future😉
请问这个可以改成可发射的发射器吗
我没有这个能力 😬看你的动手能力了
@@zvc_3DPrint 我就更笨了
AK 47
i used to make akm
I need to know how to make the kar98k magazine spring with the hair pins to do you do it
ua-cam.com/video/86AzegdAbBY/v-deo.html 3:40 Use heat shrink tubing and glue
ua-cam.com/video/86AzegdAbBY/v-deo.html 3:40 Use heat shrink tubing and glue
我是中国的，可以购买吗？
只卖stl文件🫱🏻🫲🏼
@@zvc_3DPrint 怎么联系呢？
@@user-dc5is9fi4l 视频说明区有购买方法。🙏🏻