3d prints toys AKS_74U (Creality Ender-3 V3 Plus )
Вставка
- Опубліковано 1 жов 2024
- If you like my video please help me like and share Click to subscribe and small bell. thank you. : )
Purchase link :
bingdelengku.g...
cults3d.com/en...
Ender-3 V3 Plus 3D Printer
shrsl.com/4kwor
A lot of people ask me where to buy the spring. Amazon sells it. Then there are some self-made ones.
I write down the web address below.
There are some tools I use.
3D printer
Ender 3
amzn.to/2yVr9Q3
Filament
amzn.to/3PSSYtQ
akm screw
amzn.to/2Bahaag
spring kit
amzn.to/43pyHUs (no particularly small springs here)
spring wire
amzn.to/2Lt59yE
drill 1mm-13mm
amzn.to/2WxAsyR
file
amzn.to/36ZKCuL
#zvc #3d printing #3d printed
We need the VSS VINTOREZ! 🙏
maybe future 🙂
@@zvc_3DPrintcould you possibly do the spectre m4?
@@thebandits8024 after the visit vintorez
@@zvc_3DPrint please AUG with blowback im defenetly buying the AUG if you make it
next pls vintorez
Hello, can you make a Mac 10 I especially want this model because it’s easy to print with its cubic design. I HOPE YOU SEE THIS 🙏
will be made future
Rodriguez Steven Davis Charles Davis Anna
Can you make AS VAL?
This model is one of my favorites
Same
🎉
Please do Makarov PM next! (I did not create this account just for this comment by the way)
Do you sand the part in any way? Everything seems to fit so perfectly, but mines don't 😅
The supporting contact surface needs a simple polishing. There is almost nothing else that needs to be polished
Does anyone know how to stop blobs forming on my prints. I have lowered the speed on my prints to 40mm per second and lowers the heat to 205c and is creating unnecessary blobs. I use the ender 3.
Sir, please make M9 blowback version.
I really want M9 Blowback, please confirm is it possible to make M9 blowback?
maybe future
Dude you're better than the stress shot😮
Now make the M1 Browning and I will call you father.
😅👋
Hey man, make a great musket
I know this is from at web site
Can u make mp5 shell eject blowback if i have a 3d printer my dad will be so happy ots his dream gun
will be made future
your presentations getting better and better .
🙏thx
Боже мой я удивлён
😉
Plz do the shotgun from terminator 2
🙏sorry
@@zvc_3DPrint please do the shot gun from terminator 2
If you make the Staccato XC i will personally watch the vid 1,000 times over again
Can i print it with a creality k1? Even with a smaller printing area?
k1 can be printed in full size. All of my models can be printed on a printer in size 220 220 250
@@zvc_3DPrint oh, thanks, dude
You should do a classic AK-74 now that uses the same mags as this one
Bullets are different sizes
Love it
Can you do the AS VAL or VSS next?
sorry
Where is 3d print file bro? Im really love it!!!
cults3d.com/en/users/zvc0430/3d-models
bingdelengku.github.io/
🙏🏻
Please make a Colt Python from The Walking Dead
I need barretta
Trigger guard is quite chunky. Is this due to it being 3d printed?😊
yep this way it's more sturdy
could you make the scar h in the future?
I'm not sure about that either.🙏🏻
Could’ve done without the Toy Story music but well done.
do the Spas-12 blowback pls
ive never done 3d prints, but i want to do try this one, so the model is around 18$, how much would be the total cost considering the PLA filaments? thx by the way!
Consumables approximately 600-800g
Can you make Glock 26?
maybe future
Please make hk g3a3 or a4
please tell me how you think your parts printed on a polymer printer will function normally, I’m worried about the fragility of small parts
The broken parts can try to print in a different direction.Small screws, for example, can be printed horizontally.
This is it. Gap gun Version 3d print 😮
Cool👍
Zvc 3d print! Can you print rounds and put a toy piston (capsule) in them and fill the cartridge case with hydrogen as Flasutie he did with his 30mm Howtizer 3d printed Canon?
It's too complicated.😅
Do you intend to make the M60 on the 3d printer too?
maybe future 😅
@@zvc_3DPrint Nice!
Fn-57 when 😩
Nice
make the mp40
will be made future🙂
Nice
Guess whos back
🙂
I AM BEGGING ON MY HANDS AND KNEES FOR AN M870 PLEASEEEEE
Sorry, I have had some interesting ideas recently and I want to do something fun. Not just a simple simulation model
Thanks for the asmr
😉
Can it shot real bullet?
no
Don't bro 😅
dude, can you read? are you illiterate, it was specified at the beginning of the video not once but twice, and even then it's fully plastic, so no it can't "shot real bullet" and the correct wording is "can it shoot real bullets" work on your literacy and your writing skills
Me gusta mucho te canal ,puedes hacer una Scar -h porfavor
There is currently no plan for this 🙏
Lo endiendo , lo siento por molestar
Amazing replica.
😉🙏🏻
blowback H&K416 or blowback M4A1 next?
blowback M4A1will be made future
@@zvc_3DPrint looking forward to it
Just bought the kar98k and C96 models, i hope to get this one too after.
thank u for ur support 🙏
how was assembly? interested to know how hard it is
@@Makarov918 Just follow the video step by step. It's not difficult.
ídolo saludos desde argentina
🙏😉
Make a thompson next
ua-cam.com/video/op3n5sGEDD8/v-deo.html 😉
Do you can make Heckler & Koch M416?
maybe future
@zvc_3DPrint. Ok, thanks for answer 😁
nice one, man!
😉
Finally, the non-shell ejecting model. Thank you so much for making it happened.
What do you mean? This one ejects shells at the end
@@StealthTheUnknownlet him cook
@@lennartproost537 💀
@@StealthTheUnknownI meant that model is not using the self-ejecting mechanism like on the other models he's recently upgrades.
How to buy this one
cults3d.com/en/users/zvc0430/3d-models
bingdelengku.github.io/
Very nice
😉
We want a model that fires beads
maybe future
Very good❤❤
You are from india❤
👋
thnk god i got Qidi X MAX 3 with 330x330mm, i made a SVD dragunov, now planin to make this