UPDATE: As of 3.17.1 the range at which ROC Mineables can be detected is now about 2.5-3.0km. The principal still works the same, it just isn't such a small range.
The problem I have on Aberdeen is that I keep finding 6 or 9 node hadanite but they spawn inside a large stone or a tree or something. Its always a good idea to get as close as you can and make sure the gems are accessible before going through the trouble to land and unload the ROC. Might have to try Daymar.
@@LoudGuns i did have the occasional gem in rock moments today in 3.16 on Daymar, though most were ok. Otherwise, thanks for the awesome and clear tutorial.
Brilliant! This was the most useful video on ROC mining that I have come across in the last year, and I have seen many. Thanks for putting it together!
Awesome video and incredibly helpful. I will try that from now on whenever I am going for ROC mining. Let's hope the rocks donÄt spawn inside bigger rocks.
In 3.15 and this advice is still great for someone getting into it, I had this method already in use, but found that I am traveling too slow. I can now fly at around 300ms or faster, covered almost 3x the ground. This is great!
Thank you very much for this. I never noticed the difference in ranges. This will help me immensely. Now, if the damn game would stop losing server connection every time I have a full load of ore...
Gonna have to try this method, been having a hell of a time finding hand minables since the scanning update, granted Quant has been way easier to find so the wallet hasn't suffered, but I need to brush up before the wipe.
Amazing explanation. The depiction with the circles was exactly what I needed to understand what the active scanner was actually doing. Also, thanks for the range update.
I'm a new citizen and I appreciate all your videos. I purchased the ROC paint package, and now can't figure out how to apply any of them to my ROC, lol.
Lol don’t worry Rus - it’s confusing. Make sure you’ve got your home base selected as either Lorville or New Babbage, then claim your roc to there if you’ve already had it out somewhere else. You’ll then be able to apply the paint in the vehicle manager part of the mobiglass
@@LoudGuns I got it done, but it cost me 5.000 aUEC :) The ROC wouldn't show up at Lorville until I loaded it in my Freelancer Max, landed in the hangar, unloaded it from the Max and parked beside it. That got me the "reckless vehicle operation" and my Freelancer got impounded. After I paid the 5,000 fine the ROC showed up in my vehicle manager and I was able to change the paint.
Many thanks for this. Usually went slower and was looking for the gem icon without realising that they may also appear as a box. Got a thumbs up from me!
Great video man. Noob to the game (couple thousand hours in ED tho lol) and this will help massively. I was facing all the pitfalls you mentioned - 180 degree scan angle, 100 m/s speed etc. Thanks for the info AND outlining specifically why yours is a better method. Exactly my kinda nerdery!
Glad it helped you out Nathan! Now if I could only go back and apologise to the maths teacher I repeatedly questioned on how I would ever use what she was teaching me 😂
Thanks for this video, Loud Guns. Like your ship mining video(s), a thorough, but clear and concise guide. Whilst mining / scanning has changed again in SC 3.17, the overall principles are still applicable - I can improve my mining by following your tips around setting radar coverage angle and optimal traversal speed for efficiency and coverage. Cheers!
Nice! I like this method. I have been doing slow rolling and not scanning to avoid pirates but, I didnt realise how this was working. Thanks for the info!
@@LoudGuns Exactly. I understood how to mine but I couldn't find them until I knew about needing to be 1.2km away. Thanks to your video I was out mining last night. I was getting so frustrated why I was only spotting big rocks everywhere I went lol. Everyone else's videos just cut to "oh look here's a patch of rocks" with no explanation of how they found them.
I just tried your method and i went from finding 4-6 mining nodes in 2 hours to about 30 nodes within 30 minutes. Thanks for your time, really helped me out!!!
Tried roc mining for the first time recently, tried to bring the roc back on the cutlass black, failed to go up the ramp because it was 10 cm off the ground… Got out of the roc to pilot the ship to a more flat area, died for walking on said ramp. Alt-F4ed out of there and stopped SC for the day.
Your videos are so helpful. It pointed out 2 things i was doing wrong. Moving too slowly, and being too ping happy. I've been able to try out the tips and was able to find more gems more quickly. Still need to be on the look out. The most frustrating thing is to find a nice 3 gem hadanite deposit......under a big rock! And I can't get to it.
I just started SC last week and have been hammering out bounty hunting, but it is sometimes incredibly buggy and frustrating, mining seems like a really relaxing thing to do and this channel has finally converted me xD
I do enjoy a bit of bounty hunting, but I was rolling around with a couple of mole crews at the weekend and it’s a really great way to just chill out and hang with mates (plus you make bank!).
That would be really cool, I hope there are plans for plenty of server blades so that they don’t just become a way to avoid multi-crewing multi-crew ships. One thing I’d like to see is a kill warrant scanner like in ED, enhancing the payouts you get from Bounties to an extent that it’s better to multi-crew something like a Scorpius rather than just slaving the turret.
Good advice. Have been spending a lot of time gem mining with my CB and Roc. The biggest flaw I am finding is I discover good Hadanite rock groups but more often than not they have spawned inside surface rocks and cant be mined. This is so broken!! I also have al kinds of issues with extraction not working properly unless I select it then exit mining mode and then re entering it. Also sometimes the power metering wont appear and I am getting pretty good at breaking rock but feel and judgment. That is pretty satisfying.
same here but I found a workaround. When your extraction and or charging stop working, spam M. The modes are tripped and thought your M is retracted when it's deployed. It's a very common bug if you program voiceattack without variable checks. Spam M and right click, because sometimes the arm thinks it's in extract mode when it's in fracture mode. Very messy this.
Another thing I found is to switch the laser back to fracturing mode from extraction after you’re finished, before you switch off mining mode. It seems to reduce the amount of times it bugs.
A star citizen content creator that rolls out vector geometry and Excel for his vids? I've found my home. Haha. Keep up the great work; your profession guides really helped me get oriented coming back after a few patches away. Glad I found it. Easy like & subscribe.
Great video man! I'm new at ROC Mining and this method of scanning helped a lot. I found a cluster of 10 Hadenite stones and halfway through my ROC overheated. As I'm new I didn't know what to do. I moved what I could by hand into my Cutlass Black but had to log out in the bed as I was headed out to dinner. When I logged back in the gems were in my cargo but outside my ship my ROC was gone as well as the remaining five Hadenite Rocks. Dang! Where'd you get that Cutlass paint job?
Had my first ROC mining experience the other day. Went pretty well, mined about 6 rocks and figured "this is good enough to take back to sell". Game crashed 5 seconds later. 10/10 would suffer again.
exactly what I needed. Thank you! I'm off to try roc mining once more after giving up previously multiple times. Seems I wasn't scanning low / often enough and moving far too slow.
Just had an idea... when my ROC overheated half full couldn't I have just jumped in my Cutlass, hopped over to Shubin mining facility and just sold the contents of my ROC or does the ROC physically have to be present @ Shubin? I need to try this.
Daymars big. Do I go somewhere in particular or just fly anywhere? Hope u can help. I’m really struggling with the roc now and was considering melting mine.
There's one thing about the ROC I had trouble with was loss of power on the lazer , after mining continously after a while I couldn't mine anymore deposits. Is it true the ROC power depletes over time? I have to store then reclaim in order to continue.
I always prefer Daymar, the atmosphere is thin and you could see far ahead ( better field of vision) with Abeerdeen the atmosphere is so thick, you cant see a bloody thing ,until you get quite close to the surface lol
Thank you very much! And after many many many comments having to apologise that my voice is gravelly from a misspent youth it’s really nice to get my first positive one!
@@LoudGuns I have found that the Nomad excels in this role. It is nimble, small and has excellent cockpit visibility allowing you to effectively touch the cockpit glass to the node if needed to examine it before breaking out the ROC. It is also easy to park just about anywhere. :)
why would you keep it from being stored, you want to store it, so that nobody can ram it on the pad. U can sell/process ore also when the ship and ROC is stored inside station. The persistence should make it so that the ROC will be inside the ship after you take it out again, until you claim the ship.
Mining’s so glitchy at the moment, I wouldn’t even bother. Storage depot’s not seeing ship/Roc inventory. Log on the next day and find yourself losing it all and ending up in blue pyjamas even though you logged off correctly the day b4 grrrrrrr… still waiting on my ticket!
Ah it’s glitchy for sure but still some of the best cash in game for new players. That said I’ve got hopes that the mining gadgets in 3.16 make mining in a rental prospector viable.
We were unable to get ping results at 1200 meters. We had to fly within 150 meters to get gens to result on a ping. Altitude meter showed 1000 meters when we were hugging the ground. Wonder if thats part of the issue. This was on auberdeen.
I find more gems using the prospector than I do with the Drake. Its just to bad you can not pick up the gems with the prospector, you have to go pick them up by hand. I spent 2 hours collecting Hadanight and filled the prospector storage full and the 120K back pack and all storage areas full. Then on the way to sell them and the damn game server crashes. The worst thing about this game is the Developers are to into making money with adding new ships to try to lure people into the game, and the sad part is the game has loads of bugs and crashes and server disconnection errors. and they seem to not have them on their top priority list. So when you buy the game come's a big disappointment, your buying game pieces and no game to play them on. They really need to get their heads out of their asses and start fixing the game. So far their hasn't been much progress with bug fixes/.
Some of these elements have developed new bugs in 3.15 - a good trick can be buddying up with a guy in a prospector though. Can scan for you and break the gems quick (particularly with a lancet) using short bursts.
I think I commented about this on a previous video of yours. Finding them has never been an issue for me. Fly low, and fly slow. My problem is that I get about 2-3 good groups mined before they desync. You can see them, scan them, but your mining laser doesn't have any affect. I have tried just about every solution in the book, and the only thing that fixes it is a relaunch of the game, which wastes a lot of time. I hope that gets fixed.
Ah sorry if I missed that - I think there’s an issue where the laser bugs and switches. Rather than logging out one definite way to fix it is to go back to the mining outpost and put the ROC away, then take it back over - it’ll work. I also found you can reduce the frequency it happens by switching your laser back to mining mode from extract before you exit mining mode.
@@myarbro909 cheers man - it’ll be good to know if it’s just me thinking it works :) I think I meant “switch back to fracturing mode before exiting mining mode” - words fail me past a certain time in the evening!
A person on the council thing suggested holding down 'right click' and 'Y' together and it actually fixed it for me. You switch the mode and exit buggy at same time. The lady voice repeats the mode when you get back in the buggy and it syncs up again. At least that's what happened to me on the one occasion I tried it. Did feel as though it glitched back into place. Much Hadanite will be had
UPDATE: As of 3.17.1 the range at which ROC Mineables can be detected is now about 2.5-3.0km. The principal still works the same, it just isn't such a small range.
Great vid, I was wondering if this was still current.
The problem I have on Aberdeen is that I keep finding 6 or 9 node hadanite but they spawn inside a large stone or a tree or something. Its always a good idea to get as close as you can and make sure the gems are accessible before going through the trouble to land and unload the ROC. Might have to try Daymar.
Yeah, the dunes of Daymar are better for avoiding those gem in rock moments, another point for my new favourite spot!
So when the mining bomb that they are making came into the game those big rocks should not be a problem then?
@@LoudGuns i did have the occasional gem in rock moments today in 3.16 on Daymar, though most were ok. Otherwise, thanks for the awesome and clear tutorial.
god saying cutless white cause your ship is a cutless black but with a white skin makes it sound weird lol
Brilliant! This was the most useful video on ROC mining that I have come across in the last year, and I have seen many. Thanks for putting it together!
Cheers Ashley - all you need are vector diagrams!
Awesome video and incredibly helpful. I will try that from now on whenever I am going for ROC mining. Let's hope the rocks donÄt spawn inside bigger rocks.
In 3.15 and this advice is still great for someone getting into it, I had this method already in use, but found that I am traveling too slow. I can now fly at around 300ms or faster, covered almost 3x the ground. This is great!
Perfect - glad it’s helping out mate!
Thank you very much for this. I never noticed the difference in ranges. This will help me immensely.
Now, if the damn game would stop losing server connection every time I have a full load of ore...
Gonna have to try this method, been having a hell of a time finding hand minables since the scanning update, granted Quant has been way easier to find so the wallet hasn't suffered, but I need to brush up before the wipe.
Indeed- figured this might be useful since we’re going to have to roll back come the wipe!
Yeah I think I need to bounty my way up to a prospector and just run around for quant
Amazing explanation. The depiction with the circles was exactly what I needed to understand what the active scanner was actually doing. Also, thanks for the range update.
Will make good use of the speed:coverage calculation, thanks again dude.
Love your schtick, keep up the good work!
I'm a new citizen and I appreciate all your videos. I purchased the ROC paint package, and now can't figure out how to apply any of them to my ROC, lol.
Lol don’t worry Rus - it’s confusing. Make sure you’ve got your home base selected as either Lorville or New Babbage, then claim your roc to there if you’ve already had it out somewhere else. You’ll then be able to apply the paint in the vehicle manager part of the mobiglass
@@LoudGuns I got it done, but it cost me 5.000 aUEC :) The ROC wouldn't show up at Lorville until I loaded it in my Freelancer Max, landed in the hangar, unloaded it from the Max and parked beside it. That got me the "reckless vehicle operation" and my Freelancer got impounded. After I paid the 5,000 fine the ROC showed up in my vehicle manager and I was able to change the paint.
This is really helpful I used to just go for any blocks symbols and hope their gems
Many thanks for this. Usually went slower and was looking for the gem icon without realising that they may also appear as a box. Got a thumbs up from me!
Cheers man- if it’s helpful I’m doing something right!
@@LoudGuns Keep up the great work!
Great video man. Noob to the game (couple thousand hours in ED tho lol) and this will help massively. I was facing all the pitfalls you mentioned - 180 degree scan angle, 100 m/s speed etc. Thanks for the info AND outlining specifically why yours is a better method. Exactly my kinda nerdery!
Glad it helped you out Nathan! Now if I could only go back and apologise to the maths teacher I repeatedly questioned on how I would ever use what she was teaching me 😂
Thanks for this video, Loud Guns. Like your ship mining video(s), a thorough, but clear and concise guide.
Whilst mining / scanning has changed again in SC 3.17, the overall principles are still applicable - I can improve my mining by following your tips around setting radar coverage angle and optimal traversal speed for efficiency and coverage.
Cheers!
If it wasn't for videos like yours I don't know how I would have ever learned this. Thanks!
Thanks for the content. I'm buying a Greycat after work today.
The actual optimal coverage speed idea is great. Thank you boys. Dont run into mongrels
This is an absolutely brilliant guide. This is going to help a ton in 3.15 when any earning potential will be even more important.
Cheers Jordan! Yeah I figured a lot of folks would be back to a ROC and maybe not aware of all the changes.
This was really helpful it understanding how to actually search.
Nice! I like this method. I have been doing slow rolling and not scanning to avoid pirates but, I didnt realise how this was working. Thanks for the info!
No worries- I think they even introduced something in 3.15 so pings are now not visible to other people, so should be safe enough!
Thanks so much about the info on pinging! No other video I've seen really goes over that at all and thats what I wanted to know the most
Cheers mate! Yeah knowing how to mine gems and rocks is all well and good, but first you need to find them!!
@@LoudGuns Exactly. I understood how to mine but I couldn't find them until I knew about needing to be 1.2km away. Thanks to your video I was out mining last night. I was getting so frustrated why I was only spotting big rocks everywhere I went lol. Everyone else's videos just cut to "oh look here's a patch of rocks" with no explanation of how they found them.
I just tried your method and i went from finding 4-6 mining nodes in 2 hours to about 30 nodes within 30 minutes. Thanks for your time, really helped me out!!!
Cheers man, great to hear!
This is the single most helpful video I've found on this matter. Thanks!
Cheers man - vector diagrams have their place after all!
Thank you so much! Was wondering what I was doing wrong
This is the best clearly explained video of mining basics with ROC! Thank u!!! No shit talking, just facts and tips
Cheers mate - that’s what I aim for……well maybe I talk some shit from time to time :D
Brilliant guide. Thanks! I was making the mistake to fly too slow and now I know better👍
Haha, thanks mate! Yeah I don’t think you were alone :D
Thanks for making this technique video. It does help, even though I still wish it was easier to find ROC mineables
I know right - still we work with what we have! :D
Nice simple illistration on the ping and speed! Well done.
Simple illustrations are all I can manage :D
This is actually a pretty great guide! Props dude!
Cheers mate - glad it’s useful!
Dude, thank you! I knew I was doing something wrong, used to find gems so easily
No worries mate! Glad it was helpful!
I can't wait to check this out! Fantastic information once again! Thank yoU!
Cheers mate! You’re most welcome :D
Nice. Next up how to defend yourself with the mining laser from all the pirates who will be preying on ROC miners after the wipe. :0
Send all the other people to Daymar while you go to Wala? Wait no delete delete delete
Rail gun
Rail gun and manually flying to a point since porates cant see your pings anymore
Loving the quantitative data like this
Cheers mate!
Tried roc mining for the first time recently, tried to bring the roc back on the cutlass black, failed to go up the ramp because it was 10 cm off the ground…
Got out of the roc to pilot the ship to a more flat area, died for walking on said ramp.
Alt-F4ed out of there and stopped SC for the day.
Your videos are so helpful. It pointed out 2 things i was doing wrong. Moving too slowly, and being too ping happy. I've been able to try out the tips and was able to find more gems more quickly. Still need to be on the look out. The most frustrating thing is to find a nice 3 gem hadanite deposit......under a big rock! And I can't get to it.
Yeah unfortunately that happens quite often on some moons, less on Daymar than Ariel though so another win for Daymar!
Great advice there, thank you. Traveling too slow does sound like it's the issue.
Cheers mate, you’re most welcome!
good but of info thanks mate - been flying around at about 75........time to speed things up :)
I just started SC last week and have been hammering out bounty hunting, but it is sometimes incredibly buggy and frustrating, mining seems like a really relaxing thing to do and this channel has finally converted me xD
I do enjoy a bit of bounty hunting, but I was rolling around with a couple of mole crews at the weekend and it’s a really great way to just chill out and hang with mates (plus you make bank!).
@@LoudGuns For sure!
we need scan blades
be cool to be able to scan faster and lock on scans so it shows details on a radial pip
That would be really cool, I hope there are plans for plenty of server blades so that they don’t just become a way to avoid multi-crewing multi-crew ships. One thing I’d like to see is a kill warrant scanner like in ED, enhancing the payouts you get from Bounties to an extent that it’s better to multi-crew something like a Scorpius rather than just slaving the turret.
Good advice. Have been spending a lot of time gem mining with my CB and Roc. The biggest flaw I am finding is I discover good Hadanite rock groups but more often than not they have spawned inside surface rocks and cant be mined. This is so broken!! I also have al kinds of issues with extraction not working properly unless I select it then exit mining mode and then re entering it. Also sometimes the power metering wont appear and I am getting pretty good at breaking rock but feel and judgment. That is pretty satisfying.
same here but I found a workaround. When your extraction and or charging stop working, spam M. The modes are tripped and thought your M is retracted when it's deployed. It's a very common bug if you program voiceattack without variable checks. Spam M and right click, because sometimes the arm thinks it's in extract mode when it's in fracture mode. Very messy this.
Another thing I found is to switch the laser back to fracturing mode from extraction after you’re finished, before you switch off mining mode. It seems to reduce the amount of times it bugs.
Great technique, thanks for sharing!
No worries mate - glad it helps!
This was very helpful! Thanks!
This helped, thank you. I joined your discord also to find people talking about mining. What interesting timing. Ha ha :D
Nice! Glad to have you onboard mate!
A star citizen content creator that rolls out vector geometry and Excel for his vids? I've found my home. Haha. Keep up the great work; your profession guides really helped me get oriented coming back after a few patches away. Glad I found it. Easy like & subscribe.
Cheers mate, I know my content might be a bit too dry at times for some people….but it’s exactly that level of nerd that makes it perfect for others!
Great explanation
Cheers mate, and thanks for all your great content!
Great video. most helpful one on the internet pls keep making more!
Cheers Nick! Will do
@@LoudGuns I'm a noob still on my first ship. going to save up and skip over the roc mining and go to prospector.
Great video man! I'm new at ROC Mining and this method of scanning helped a lot. I found a cluster of 10 Hadenite stones and halfway through my ROC overheated. As I'm new I didn't know what to do. I moved what I could by hand into my Cutlass Black but had to log out in the bed as I was headed out to dinner. When I logged back in the gems were in my cargo but outside my ship my ROC was gone as well as the remaining five Hadenite Rocks. Dang! Where'd you get that Cutlass paint job?
I have a Taurus, but when I get a chance I will give this a shot. The 1.2-1.4 is helpful.
Nice - Taurus should be quite good for it, although I don’t honestly know how a Connie flies at 400m/s planetside :D
Had my first ROC mining experience the other day. Went pretty well, mined about 6 rocks and figured "this is good enough to take back to sell". Game crashed 5 seconds later. 10/10 would suffer again.
Thanks, it took a while but I understand your ROC method.
exactly what I needed. Thank you! I'm off to try roc mining once more after giving up previously multiple times. Seems I wasn't scanning low / often enough and moving far too slow.
I spoke to a bunch of people in the org and that seemed to be the common factor!
Nice little guide on effective scanning!
Cheers Dale - much appreciated!
Good advice about the optimal scanning speed
Now if I could just learn not to crash at much above that it’ll be gravy :D
Great tips, thanks!
Gems.... That's outrageous, truly truly outrageous.
Great description 👍
Truly :D
Thanks for the guide, this is very useful !
No worries mate, glad it helped!
Solid helpful info, thanks LG!
Cheers Steve, glad it was useful mate!
Just had an idea...
when my ROC overheated half full couldn't I have just jumped in my Cutlass, hopped over to Shubin mining facility and just sold the contents of my ROC or does the ROC physically have to be present @ Shubin? I need to try this.
great guide! I will definitely try it out
Great video! This was extremely helpful.
Cheers Tucker, glad it helped you mate!
Do you need / want differert mining modules for the Roc? Or does they just apply to mining ships ?
How do you get the fly over shots outside of the cockpit, is there a key bind or special camera angle you use for that? The footage is amazing.
Daymars big. Do I go somewhere in particular or just fly anywhere? Hope u can help. I’m really struggling with the roc now and was considering melting mine.
thanks for the info mate, subbed
Cheers Anthony!! Much appreciated.
great information, thanks for sharing!
Cheers Rene!
Just about to start mining. Looking for a good guide and it looks like I hit paydirt. Keep up the great work.
Cheers mate! Thank you very much!
Great Guide! Thx alot!
Cheers mate!
Sharing with org, excellent breakdown. My tactics were all wrong lol.
Cheers Levi - let me know how you guys get on!
"I'm a massive nerd thats gonna show you charts" -- I about died. Good shit brother.
Thanks very much!
Very well done
Subbed after that video. thx bub!
Cheers Michael - much appreciated!
Good info, thanks!
Cheers mate!
I miss the old triangle scan returns
Great vid
Sometimes I do too, mostly I miss gems having a sig you could pickup at 2.5km :D
There's one thing about the ROC I had trouble with was loss of power on the lazer , after mining continously after a while I couldn't mine anymore deposits. Is it true the ROC power depletes over time? I have to store then reclaim in order to continue.
Where are the best named locations for hand mining if you're in a starter ship and just wanting to grind your way into bigger better etc.
Good vid. Thanks dude
Thank you!
Brilliant man. Brilliant.
Cheers Francois!!
I always prefer Daymar, the atmosphere is thin and you could see far ahead ( better field of vision) with Abeerdeen the atmosphere is so thick, you cant see a bloody thing ,until you get quite close to the surface lol
Massive nerds are cool. Thanks for the guide. Really helpful.
Haha - cheers Rhys!
You have a great voice and speaking skills, plus you make really nice videos. +1
Thank you very much! And after many many many comments having to apologise that my voice is gravelly from a misspent youth it’s really nice to get my first positive one!
Is the scan a sphere or a box? So, as altitude increases the surface area scanned decreases???
Based on the animations it appears to be a sphere, so low flying does help a lot.
@@LoudGuns I have found that the Nomad excels in this role. It is nimble, small and has excellent cockpit visibility allowing you to effectively touch the cockpit glass to the node if needed to examine it before breaking out the ROC. It is also easy to park just about anywhere. :)
@@olmecultra6588 yeah I do really like the nomad for roc mining, although I did make the mistake of doing a qt jump with the roc on the back once :(
How do you keep your ship and ROC from being stored everytime you go to land to sell.
why would you keep it from being stored, you want to store it, so that nobody can ram it on the pad. U can sell/process ore also when the ship and ROC is stored inside station. The persistence should make it so that the ROC will be inside the ship after you take it out again, until you claim the ship.
Mining’s so glitchy at the moment, I wouldn’t even bother. Storage depot’s not seeing ship/Roc inventory. Log on the next day and find yourself losing it all and ending up in blue pyjamas even though you logged off correctly the day b4 grrrrrrr… still waiting on my ticket!
Ah it’s glitchy for sure but still some of the best cash in game for new players. That said I’ve got hopes that the mining gadgets in 3.16 make mining in a rental prospector viable.
We were unable to get ping results at 1200 meters. We had to fly within 150 meters to get gens to result on a ping. Altitude meter showed 1000 meters when we were hugging the ground. Wonder if thats part of the issue. This was on auberdeen.
thank you. ( 4 the Algorithm) 👍
Thank you
I have a problem with the extractor not being able to pull anything in after the inventory reaches 23.5 out of 80. Anyone else having this?
Great video!! Thank you
Cheers Greg - glad it helped mate!
I find more gems using the prospector than I do with the Drake. Its just to bad you can not pick up the gems with the prospector, you have to go pick them up by hand.
I spent 2 hours collecting Hadanight and filled the prospector storage full and the 120K back pack and all storage areas full. Then on the way to sell them and the damn game server crashes.
The worst thing about this game is the Developers are to into making money with adding new ships to try to lure people into the game, and the sad part is the game has loads of bugs
and crashes and server disconnection errors. and they seem to not have them on their top priority list. So when you buy the game come's a big disappointment, your buying game pieces and no game to play them on. They really need to get their heads out of their asses and start fixing the game. So far their hasn't been much progress with bug fixes/.
The big boss coming in again with the solid Intel. Thanks again ya legend!
Big boss? I might have to get this printed on a mug.
@@LoudGuns 🤣🤣🤣
Thanks that really helped
It's that white color skin for the cutlass is still for sale?
Awesome, ty. Subbed.
Currently not getting mineral id from scanner. Having to land and scan with ROC
Some of these elements have developed new bugs in 3.15 - a good trick can be buddying up with a guy in a prospector though. Can scan for you and break the gems quick (particularly with a lancet) using short bursts.
Damn, someone ingame told me to fly 50m/s. Gonna try this tomorrow and see if I can actually find some rocks.
Oof, they need to find this video too :D
I think I commented about this on a previous video of yours. Finding them has never been an issue for me. Fly low, and fly slow. My problem is that I get about 2-3 good groups mined before they desync. You can see them, scan them, but your mining laser doesn't have any affect. I have tried just about every solution in the book, and the only thing that fixes it is a relaunch of the game, which wastes a lot of time. I hope that gets fixed.
Ah sorry if I missed that - I think there’s an issue where the laser bugs and switches. Rather than logging out one definite way to fix it is to go back to the mining outpost and put the ROC away, then take it back over - it’ll work. I also found you can reduce the frequency it happens by switching your laser back to mining mode from extract before you exit mining mode.
@@LoudGuns 2 things I haven't tried yet! Thanks dude, I will give it a shot and leave feedback.
@@myarbro909 cheers man - it’ll be good to know if it’s just me thinking it works :) I think I meant “switch back to fracturing mode before exiting mining mode” - words fail me past a certain time in the evening!
@@LoudGuns the storing definitley works. But switching back doesn't stop the "laser ceasing to work" but it does help negate the switch bug
A person on the council thing suggested holding down 'right click' and 'Y' together and it actually fixed it for me. You switch the mode and exit buggy at same time. The lady voice repeats the mode when you get back in the buggy and it syncs up again. At least that's what happened to me on the one occasion I tried it.
Did feel as though it glitched back into place. Much Hadanite will be had
How do you set up scanning In a ship?
Nice tips dude ! Any workaround for collection ? They don't want to come in the ROC just messing around :/