how to wire a RELAY in real life and USE it DIY
Вставка
- Опубліковано 21 сер 2024
- just an idea on how to do it.... this is a permanent set up on the RUBICON
AUX FUSE BOX: amzn.to/39Tzv8B
KC LONG RANGE LIGHTS: amzn.to/38m4l8o
feel free to ask me anything...
THANKS FOR WATCHING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Just found your channel ! Good stuff man! Picked up a truck and been pulling relays out with nothing but broken wires everywhere Great channel
Very clean looking and very well explained, thank you , keep them coming
You're pretty funny dude. 12V electrical comedy. 100%
Damn! that´s a lot of light, thanks for the info again
Great video
Well this has been informative. I have a 98 Suzuki sport and i really do not understand how my headlights actually work . I am wanting to plug in the relay from the high beam wire #86 as in my local that is law .
Good vidiyo sar
Great video. I have sort of a backward application of a relay and wonder if this will work. I have a 12V refrigerator in my car that will run off the car's 12v or 12v powered by a 115vac brick. I'm trying to use a relay to change the INPUT voltage from battery if the relay is not energized and power it from the brick if the power is coming from the brick. In this case, the refrigerator will fro the car when I am driving and automatically run at a campsite when I hook up to 115vac.
Fridge - to car ground
Fridge + to 30
Car 12vdc + to 87a
Brick 12vdc + to 87 AND 86
Brick 12vdc - to 85 and Car ground
In normal car operation, the fridge is grounded and powered from 87a through 30 into refrigerator
As soon as 115vac is applied to brick, the relay is energized by the brick, and power will go from 87 through 30 into refrigerator
Will this work???
Few questions hope you're able to answer, how do I make sure that the bulbs are as bright as they can be, I used this to wire up my headlights (h4), if I want it brighter would i need a different bulb, thicker wires, or switch out the inline fuse for a higher amp? ty for you time!
get modern lights.. h4 are old and technology and that’s all you can do.
Can you run more than 1 supply wire from your fuse block in order to power multiple switches with the same terminal? At what point is it bad to keep adding switches to the same terminal?
I'm guessing incandescent or halogen? I have LEDs, do I need a relay because they pull such a low demand? Just straight wire them....
the relay is for when the lights pull a lot of amps.. how many amps do they pull?
My blazer lights schematic have a white wire going from the switch to the relay but the relay is plastic so what terminal does it go on? Thanks
How well will this circuit hold up to moisture? I tend to get a lot of water and mud splashed up into my engine compartment when I wheel my Jeep. I am concerned I may need to purchase a fuse/relay box that is water tight.
Hey I'm the real Chris craft
🤔
Question for you I want my fog lights to be like factory where they go off when the bright lights come on. This is a on a 07’FJ Cruiser. Can I come off the low beam wire on the headlights to the toggle to run the switch in the relay. Hope I’m clear, been watching and learning.
yes
So would you just splice that hot wire that is going to the switch if you wanted to add more switches?
you could run a 100 swtiches off that wire.. only if they are to turn on relays
Why did you connect the fog lights to 87? I thought 30 was power and 87 was ground
if you wire it like that you gonna catch the damn car on fire.. I have several videos on wiring relays
Would I be able to use my tailight as a switch? I tried it for some underglow lights because I want them to turn on when I unlock my car and the relay just buzzes so I know something is wrong
yeah but you don’t run the wire through. the relay .. pigtail off hot side of brake wire to 86 and then ground 85 to chassis or body .. it’s just a signal wire… is that how you wired it?
@@chriscraft77022 so I tapped into my taillight and ran it to 86, my underglow to 87, my fuse/12v to 30 and my ground to 85 to ground. It turns on my underglow when I unlock my car is intended but it doesn't give enough power and the relay just buzzes the whole time
Why connect them to the fog lights? Why not just flip both the fog light switch and the long range light switch on?
the fog lights were on the stock bumper and I never had them.. I would of done that if I had them... I used the switch because it was available and not being used
Do you have to waterproof the relay?
i didn’t.. but I don’t do mud or water crossings
Can I splice into my one of my parking lights at the light to power the switch
yes.. I have a wire a relay in real life video where I did that for KC long range lights
@@chriscraft77022 thanks so I only have to run the wire from the one park light to relay to what num6pin?
86
@@chriscraft77022 sorry I have a hard time getting this I made a typo in my last question can I spice into 1 positive wire at the parking light to energize the relay to power both fog lights