Speed Gems Ford FE to Ford Truck 5 Speed ZFS5-47
Вставка
- Опубліковано 16 жов 2024
- Speed GemsFord FE to Ford Truck 5 Speed ZFS5-47 kit installation
You can find out more about the adapter kits that fit on these motors on our website: transmissionada...
Speed Gems
806H S. Division St. Waunakee, WI 53597
PHONE: (763) 767-4480
EMAIL: sales@transmissionadapters.com
WEBSITE: transmissionada...
INSTAGRAM: / speed_gems
So a person needs a adaptor and a smaller clutch. I have a 75 with a fe 390 that I heard folks swapping these zf5 speeds. Thanks for informing us that a diesel type won't work.
Great video. I picked up a 99% complete unmolested factory 1977 Ford F150 Ranger XLT 4x4 4-speed with factory air and a vinyl roof with full trim package. it's been sitting for 8 years. With a tune-up kit some fresh fluids and gasoline it fired right up. it has the NP 435 I believe it is transmission bolted onto the 351 m400 engine. 146,000 actual miles. it's so factory stock that I hate to start changing things on it. I'm really enjoying driving it around remembering my youth I was 17 when this came out in 1977. it was actually sold on my birthday how do I know all the original paperwork including the owners manual and warranty card were filled out and in the glove compartment. all I had to do was clean it up and give it a tune-up kit and some new skins for the old Wheels. BTW it's Bullet Green.
Very cool. I'm about to put my Grandad's 73 F350 Dually, dump bed with a 351M back in service. Planning on warming up the 351M a bit. Its great to find out that 5spd mods are this easy!
If you manufacture the 11" Clutch. why are they hard to find?
Hi. Just wondering what makes the diesel transmission different? (Is it only the starter location?) Thanks for sharing your videos with us!😎
Hey Bob I have one of your FE kits and have mated it to an MT82 2018 mustang box, I have still to install but it looks like it lines up good
Thanks, John! Good to hear!
This might be a dumb suggestion or idea, you should have templates on your website that can be printed out to scale (FedEx/Kinko's) that then can be compared to what people have, or they can compare to what they're looking at...
The printed paper copy could then be transferred to cardboard, wood or a more durable piece of plastic, such as high density polyethylene plastic...
This isn't a bad Idea at all.
However, we are pretty knowledgeable and we can get you what you need with an email or phone call.
I’m putting a ZF 5 in a 96 F150 with 4.9 L
2 wheel drive. Has freaking Mazda 5 speed.
Finally! Was looking for a vid describing my transmission. Good video. Thanks.
Further research reviles that a Manual was not available behind a 5.4.... Are you guy based in Canada?
Is it possible to take the 351 Windsor 5.8 l and swap out the four-speed automatic for a 6-speed manual in my '91 F350
Wow. I just got a 72 f100 with a 4 speed. I'd like to do something like this with it. I just wouldnt know where to start
Thank you!!!
Need to make one to go from modular to sbf and diesel to sbf
How much for the kit conversion, l have 1976 ford zf5 and
1965, 352 ford fe ??
How can I get a 11inch 1 1/4 input shaft clutch do you sell them
I have a 1986, F250 with C6..460 motor 4x4. Would you have what it needs to put a ZF5 on it? Still trying to locate one.
We should. Just need to know what engine the ZF5 came off of and we can set you up!
Just find a Zf5 for a 460.
@Damian Rodriguez - Hi Damian, Please see the link below for all of our Ford Kits...Thank you for choosing Speed Gems Transmission Adapters!
transmissionadapters.com/collections/ford
I have engine 427 Ford And C6 ATF...what stick shift is better a my engine 427 ...
The ZF is a great option.
I have 351w zf5 from f350 will the adapter plate work
This kit is for the FE engine So you can bolt the ZF5 from a 351W to the FE. We also have kits that allow you to use a Modular transmission as well.
@@speedgems3978 i think he meant bolt to a fe trans from 351w
@@overbuiltautomotive1299 You're right. A ZF5 from a 351W will bolt to this kit. Thanks
@@speedgems3978 just the way it was worded .much love guys may Jesus be your co pilot
How can I get one of those clutches I need 11 inch with 1 1/4 input shaft
a question can I use it in ford f100 390
Absolutely! This will work for any of the FE engines.
@Speed Gems ....it's big block .... c4 transmission 3 changes
it's big block .... c4 transmission 3 changes
@@mariobriones5731 Please send us an email and we can help you out better there. Sales@transmissionadapters.com
What’s about a 5 speed for a mustang
@ Jalen Ross - We have a Kit for that! Please see the link below for our Speed Gems FE Kit options...The Kit selection will depend on what 5-speed you're looking to mate up.
transmissionadapters.com/search?type=article%2Cpage%2Cproduct&q=FE*
Thank you for choosing Speed Gems Transmission Adapters!
I need a swap 460 to 7.3 ZF6 speed info?
@Tom Christensen - Sorry, nothing for the 460 to Manual...This Kit is for the FE Engines.
An 11-inch "car" clutch for an FE "big-block" with a light-duty iZF 5-speed OD from a mod- motor pickup for "work trucks".
What an "upgrade".
This also works with the ZF6 and we can provide you with an upgraded clutch if your application is a higher HP motor
Teléfono para llamar ocupo adaptación
qué motor tienes
ZF does not have a deep first gear. NO GOOD>