Це відео не доступне.
Перепрошуємо.
Heat N Glo IPI burner will not light part 2
Вставка
- Опубліковано 18 лют 2021
- Heat N Glo Fireplace Burner Won't Light. The pilot lights but the burner will not come on.
If this video helped you and you are feeling generous, my Venmo is @flueandflame
#HeatNGlo #Heatilator #Majestic #Dexen #Intermittentpilot #IPI #gasfireplace #fireplace
You saved me hundreds of dollars. I was about to give up when I found your video. Thank you!
Ha! I've been cleaning the thermopile and rods for 30 minutes to no avail. I saw your video and tried thwacking the valve and viola! It works now. You are the BEST!
This fixed mine too! Thank you. Saved a service fee.
You are the man. This was exactly my issue. Appreciate your simple and straightforward video.
You’ve got to be kidding me! I worked cleaning my H & G all morning and it won’t work. I watch this and wack the side gently with a screw driver like this expert said and it came on immediately! 😳 I’ve always known that when you have a hammer, everything’s a nail. Thanks for the fix! Simply incredible. 👍
This is why I get paid the big bucks 🤣😂
Thanks real helpful thanks for saving me time and money 😊
I'm glad this helped you.
Wow old school Radio Shack meter. 👍👍
I can only imagine the service tech send me out of the room first and then give the valve a good tap . He’ll then ask me to come back in and hand me the bill for $250 dollars. 😂😂
Thank you for sharing your expertise! Merry Christmas!
I always wait until the customer is not looking when I tap the valve. I then clean the glass and dust everything to kill time. My bill is only $159. Maybe I should raise my prices 😂🤣
I can’t believe this worked!!! Thank you!!!
Sometimes it's that simple. Glad it worked for you.
Thank you for posting this!! I had the same issue and this was the fix. Thanks!
I call that the "fonzi" method.
Teach me more plz. I need all the knowledge possible. I recently got a new job and I only really know about the manual style fire places. Thanks for ur videos. I’m subscribed I liked the video n set it for notifications
excellent video. I had the same problem and this video was my solution. I am very grateful
Glad this helped you get it working.
Sonofagun, the screwdriver did the trick! Thanks!
I call it Percussive Maintenance. Glad it worked out.
That worked for me. Thank you!
The pilot would light but the burner would not ignite. The fireplace has an electronic ignition system with NO standing pilot flame. The control module and valve are manufactured by Dexen.
Thank you so much. It worked 👍👍👍
I'm glad it worked for you.
Did you end up replacing the stuck valve?
I did not. It has been working flawlessly since.
Same @#$% problem and is giving the landlord fits. Where's my hammer? ok, screwdriver but ready for a mallet by now. Stand by ....
Currently have a unit with a stand alone pilot/remote. Valve lights, but when burner lights it will go out within a few seconds. Will automatically relight then go out.
Was staying on for a bit. Then same issues. Thermocouple??
If your system has a pilot flame that stays on all the time, then your problem is probably the thermopile. The thermocouple only controls the pilot flame. If your pilot flame is staying on, the problem is not the thermocouple. I would start with cleaning out the pilot orifice and see if the problem goes away.
My Heat & Glo SL-750 pilot would not light. My inlet pressure is about 8iwc. I get no pressure on the outlet port. I also replaced the OEM Dexen module and I’m only getting 200mV at the green wire. The pilot barely lights and the spark is staying on even after getting a small flame. I’ve tried tapping many times but it hasn’t helped. Do you think I have multiple issues here?
200mv is not enough to open the pilot valve. In case this is a false reading, I would take the pilot assembly out and clean out the pilot orifice.
@@flueflame5438 ok thank you. I’ll check that. I just connected the original Dexen module and same thing… 3vac input and 200mV at the green wire with my black lead on the valve chassis. Odd that both old and new Dexen modules have the same reading at the green wire. Maybe a bad chassis ground?
There is a black wire in the control module wire harness. The wire is screwed to the fireplace body. This is the ground wire for the system.@@BigEasyPatriot
@@flueflame5438 I appreciate your help. I’ll remove the ground and see if it’s still making a good connection with the chassis. Fyi…I believe my system is from 2006. Might just be time for a complete upgrade 😂
Im trying this tomm wish me luck lol
good luck
It didn’t work, i’m going to try the thermocouple next. Thx for the video
I have a Heat & Glow 6000G with electronic ignition and the pilot won't light, nothing has changed since last fall when the unit ran fine
Do you see a spark at the pilot?
@@flueflame5438 no, usually hear a clicking as well
@@wfeierday The clicking or ticking sound is the spark igniter attempting to light the pilot. You may need to remove the glass and check the pilot assembly for any obstruction. Having the glass off will give you the opportunity to clear away any lava rock or glowing embers that may be preventing the spark from reaching the gas coming out of the pilot. You may also be able to hear a faint hissing sound if gas is coming out of the pilot when the wall switch is turned on. If you hear hissing and see spark at the pilot, the pilot will soon light after the air gets pushed out of the line and gas reaches the pilot.
I have a Dexen GFVE14 that won't do nothing. It don't seem like it has a wall switch as I can't see any. Do you have any idea?
I am not familiar with that part number. Perhaps you could post a video of your system on UA-cam and I could look at it for you and try from there.
Smacking it worked but the fire keeps going out and then on by itself. Any idea what the issue is?
What is the make and model number of your fireplace?
@@flueflame5438 I have a heat n glo SL-5-IFT with this problem plus constant beeping
Mine worked but than fire keeps coming on and off…..
clean out the pilot and check the flame sensor
My fireplace doesn't have a pilot light, it's a IPI fireplace and I can't get it to light. Would this same method work on it?
When you flip the wall switch, is there a spark at the pilot? When you remove the glass and flip the switch, do you here the gas hissing? If these two things are occurring, the pilot will eventually light. It may take several tries, but it will eventually light the pilot.
@@flueflame5438 When I flip the switch, I can see the spark but I don't hear the hiss of the gas.
@@flueflame5438 So I flipped the switch and I can see the spark. So should I take off the glass?
@@jop003 The only way to verify the gas is coming out is to remove the glass and listen for a faint hissing sound.
@@flueflame5438 okay