I am doing this mod currently, because I think it is a great idea. One thing I have found is using the wires in the video your outlet will only have power as long as the windows are unlocked from the drivers master switch. As soon as I lock it the wire loses voltage which makes sense since it disables the rear window buttons, just an FYI for some one doing this mod. Thanks for the idea.
Haha, I just found this out the other day myself. I was freaking out wondering why they weren't lit up! Then I realized I locked the windows because of the kids, as soon as I unlocked them they turned back on!
Great video, thanks so much for the step by step instructions! My daughter is muuuuch happier in the back now. I especially appreciate how you identified which wires to tap. I only changed up one thing. Folks might find it easier to use a large step drill bit to drill the hole in the armrest. It leaves a much cleaner hole compared to a hole saw.
I appreciate the effort you took to edit and create this video. Your step by step instructions are informative, but not drawn out. I also like how you showed how you narrowed down which wires to tap into using a multimeter. Most videos I’ve seen (even from “professional” shops) are shaky, less organized, and either not as informative or if they are, they’re super over worded like an ADHD squirrel.
Charles, thanks a lot for your video's. I have learned a lot. This video will make my life easier since people in the back will not be running a cord to the front. Was very easy and only took about an hour for both doors. You are a genius,
I just wanted to say thanks for doing this video. I installed USB ports today in my 2021 RAM 2500 and your video was a huge help. I basically did the same setup as you. The funny part was one door was the same as yours in the video as far as the wires. But on the other door my power wire was an orange with a tan strip. The orange with purple went to the window. You would've thought they would've keep the colors identical on the same truck 🤣
Great tip. I've thought about adding USB power in the back, but was unsure about a good spot. Regarding the chargers you picked, I like fact that they have closing caps to be closed when not in use, especially to keep debris and rain out. However, like my inverter that I have back there, the caps will never be closed by the kids and will eventually get broken off by the kids. I suggest buying a few replacements to have on hand when that eventuality happens, so you can quickly exchange them with matching chargers.
Great idea, instructions and warnings! Thanks! Note: the closer to the door hinge the charging port is mounted, the less the charging cable will move when the door opens. I have a 2017 SLT, but no rear door pocket to hold charging phone (cheaper build / less features every year). I need to put the item being charged on the front-seat-back, so a short charge cable and long movement might pull a phone out when opening the door.
I installed one in my 1994 Chevy Silverado k1500 it works great had to mess with the wires quite a bit but got everything nice and taped up and tight works good looks good so far so good
Great video. Only problem I see is the kids opening the door and their electronics going with it lol. I'm going to install one on each side of the back of the center console since the kids have 10ft cables.
This would be a good addition to the front also. The factory usb's are very weak. Won't even charge my Android phone. Need to put a 2A USB into the cigerette lighter port.
Have you had any issues while raising/lowering the window and charging at the same time? Was the gray wire a ground wire? Thanks for the video. I already ordered them.
He ain't lying about how unreliable those little blue snap on wire taps are. They need to be illegal in the united states. It is amazing they are still sold here. I think they are more of a fire hazard than a convenient wire connector.
Seriously. Bugs me so much that they’re so widely used. Makes diagnosing an issue almost impossible-not to mention just unreliable even if they are working.
hi there i have problem with my ram 1500 warlock 2020 i cant find the wire which negative and posite for the rear right window hopefully somebody can help me.TIA
Great Video. Wondering though if I need to think of any additional provisions when dealing with an armrest that has the leather...I have a Limited 2500, with leather everywhere. Any thoughts?
Great Video, very well done. I have a 2013 Ram SLT and I love the truck. However the door alarm and seatbelt alarm drive ne nuts. Because I work on the farm here and have the door open a lot and never use the seatbelts because when I repair fence and in the field there isn't much use for them. Is there a way to disable this thing? I always use my belts when on the road anyway. And I also leave my door open with music on when working. Anyone have an answer for this? Thanks
I'm not sure if this will work for a 2013, but I think it does... The Enhanced Warning System (BeltAlert) can be enabled or disabled by your authorized dealer or by following these steps: NOTE: The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON or START position. DaimlerChrysler does not recommend deactivating the Enhanced Warning System (BeltAlert). 1. With all doors closed and the ignition switch in any position except On or Start, buckle the driver’s seat belt. 2. Turn the ignition switch to the ON position and wait for the Seat Belt Warning Light to turn off. 3. Within 60 seconds of turning the ignition switch to the ON position, unbuckle and then re-buckle the driver’s seat belt at least three times within 10 seconds, ending with the seat belt buckled. NOTE: Watch for the Seat Belt Warning Light to turn on while unbuckling and off while re-buckling the seat belt. It may be necessary to retract the seat belt. 4. Turn the ignition switch to the LOCK position. A single chime will sound to signify that you have successfully completed the programming. The Enhanced Warning System (BeltAlert) can be reactivated by repeating this procedure.
My ford fiesta has spot where it usually would have a cigarette lighter but it just has a permanent cap, why do manufacturers do that and can i add a charging port there?
more or less. You want to use power (both neg and pos) that would normally go to the window motor. Also you need to be careful that the wire without a (+) isn't a wire that normally has no voltage unless you're operating the window (like the signal wire for the window or something).
🤔 door panels huh. Good wiring instructions, i don't think the door panel is the most effective way with a family i can see anyone accidentally leaving dangling cables or someone opening the door while the kid is charging an iPad i can see that iPad flying across into the ground.
I am doing this mod currently, because I think it is a great idea. One thing I have found is using the wires in the video your outlet will only have power as long as the windows are unlocked from the drivers master switch. As soon as I lock it the wire loses voltage which makes sense since it disables the rear window buttons, just an FYI for some one doing this mod. Thanks for the idea.
Haha, I just found this out the other day myself. I was freaking out wondering why they weren't lit up! Then I realized I locked the windows because of the kids, as soon as I unlocked them they turned back on!
Good call! No fix, but saves hair pulling!
Great video, thanks so much for the step by step instructions! My daughter is muuuuch happier in the back now. I especially appreciate how you identified which wires to tap. I only changed up one thing. Folks might find it easier to use a large step drill bit to drill the hole in the armrest. It leaves a much cleaner hole compared to a hole saw.
Yeah I want to do this mod so my dog can charge his phone and his tablet. Lol but seriously Thanks for the video it helped me out.
Yeah how can your dog play games on his tablet if the battery runs out! Glad it helped!
Lol yeah my dog also use a tablet.
I’m surprised you didn’t add a fuse I’m doing this adding a fuse great video.
I appreciate the effort you took to edit and create this video. Your step by step instructions are informative, but not drawn out. I also like how you showed how you narrowed down which wires to tap into using a multimeter. Most videos I’ve seen (even from “professional” shops) are shaky, less organized, and either not as informative or if they are, they’re super over worded like an ADHD squirrel.
EXCELLENT VIDEO !!!
I was racking my brain trying to figure out how to run power in the back seat of my Silverado.
Thank you.
Charles, thanks a lot for your video's. I have learned a lot. This video will make my life easier since people in the back will not be running a cord to the front. Was very easy and only took about an hour for both doors. You are a genius,
Glad you got it installed! It does make things easier...no more back seat riders hogging the usb ports!
I just wanted to say thanks for doing this video. I installed USB ports today in my 2021 RAM 2500 and your video was a huge help. I basically did the same setup as you. The funny part was one door was the same as yours in the video as far as the wires. But on the other door my power wire was an orange with a tan strip. The orange with purple went to the window. You would've thought they would've keep the colors identical on the same truck 🤣
Thank you i installed my usb charger on my truck and it works. Very easy to install. More power.
Great tip. I've thought about adding USB power in the back, but was unsure about a good spot. Regarding the chargers you picked, I like fact that they have closing caps to be closed when not in use, especially to keep debris and rain out. However, like my inverter that I have back there, the caps will never be closed by the kids and will eventually get broken off by the kids. I suggest buying a few replacements to have on hand when that eventuality happens, so you can quickly exchange them with matching chargers.
I have the same thoughts about the covers, hopefully they tolerate the abuse lol.
Great idea, instructions and warnings! Thanks!
Note: the closer to the door hinge the charging port is mounted, the less the charging cable will move when the door opens. I have a 2017 SLT, but no rear door pocket to hold charging phone (cheaper build / less features every year). I need to put the item being charged on the front-seat-back, so a short charge cable and long movement might pull a phone out when opening the door.
Ordered my parts today, thank you for the video
Incredible video man.. seriously helped me figure this out better than any other video!
I installed one in my 1994 Chevy Silverado k1500 it works great had to mess with the wires quite a bit but got everything nice and taped up and tight works good looks good so far so good
Heck yeah! Glad to see this being helpful for other vehicles too
Did this in my Rebel, work great!
Nice and clean install. Great video instructions- Perfect... Thanks
Great video.
I did the exact same set up to my ram thanks to you.
1 word "unibit" Great Vid.
Excellent video my man... No bs very clean and forward... Good job
Thanks! Hopefully install goes smoothly!
I was thinking of adding a cigarette and USB in back under the front-middle seat. Power wires there that feed the center fold-down storage.
Great video. Only problem I see is the kids opening the door and their electronics going with it lol. I'm going to install one on each side of the back of the center console since the kids have 10ft cables.
Luckily they should have enough room to put their electronics in the door pockets...will they do it though? Maybe, maybe not haha.
Did you end up doing it ? If so, how was it ?
Manufacturers should do the same.. great idea I'll definitely will be doing this..
No they shouldn't. If the start doing it they will start charging $5k extra calling it a convenience package
Great Job !!!
Thank you!
Excellent video.
Did this today thank to your video! Thank you
7:30 that's magic!
amazing video. going to be doing this to my f250 this weekend.
Thanks dude
This would be a good addition to the front also. The factory usb's are very weak. Won't even charge my Android phone. Need to put a 2A USB into the cigerette lighter port.
What side steps do you have? They look really good
Awesome man thanks
Awesome video! One question, have you had any problems with USB devises overloading the fuses? Thanks again!!
Nice job!
Great video!
Outstanding video! Thanks!
Awesome video. Does that put any type of strain on the electrical system if all the ports are being used?
Thank you for this video! What type of and what gauge wire did you use to connect to the bottom of the charger?
Just regular 14 awg wire
For anybody doing this make sure your window lock isn’t on or you won’t get any power and you won’t be able to find the wire
Have you had any issues while raising/lowering the window and charging at the same time? Was the gray wire a ground wire? Thanks for the video. I already ordered them.
He ain't lying about how unreliable those little blue snap on wire taps are. They need to be illegal in the united states. It is amazing they are still sold here. I think they are more of a fire hazard than a convenient wire connector.
Seriously. Bugs me so much that they’re so widely used. Makes diagnosing an issue almost impossible-not to mention just unreliable even if they are working.
Is this the same wired for a 09 ram
Did you use 16 gauge wire?
Can I put a 12v plug there?
hi there i have problem with my ram 1500 warlock 2020 i cant find the wire which negative and posite for the rear right window hopefully somebody can help me.TIA
Great Video. Wondering though if I need to think of any additional provisions when dealing with an armrest that has the leather...I have a Limited 2500, with leather everywhere. Any thoughts?
Even in the little "door" pocket? The higher one. Is that plastic? Right below where you would grab to close the door.
Looking to do this mod, very nice video. Any issue charging a devise and operating the window at the same time?
Does it matter which wire you slave off of for pos and neg? I wouldn’t want to confuse the gray and orange/purple wires as the wrong polarity.
Great Video, very well done. I have a 2013 Ram SLT and I love the truck. However the door alarm and seatbelt alarm drive ne nuts. Because I work on the farm here and have the door open a lot and never use the seatbelts because when I repair fence and in the field there isn't much use for them. Is there a way to disable this thing? I always use my belts when on the road anyway. And I also leave my door open with music on when working. Anyone have an answer for this? Thanks
ua-cam.com/video/KsuHo_jvvFc/v-deo.html
I'm not sure if this will work for a 2013, but I think it does...
The Enhanced Warning System (BeltAlert) can be enabled
or disabled by your authorized dealer or by
following these steps:
NOTE: The following steps must occur within the first
60 seconds of the ignition switch being turned to the ON
or START position. DaimlerChrysler does not recommend
deactivating the Enhanced Warning System
(BeltAlert).
1. With all doors closed and the ignition switch in any
position except On or Start, buckle the driver’s seat belt.
2. Turn the ignition switch to the ON position and wait
for the Seat Belt Warning Light to turn off.
3. Within 60 seconds of turning the ignition switch to the
ON position, unbuckle and then re-buckle the driver’s
seat belt at least three times within 10 seconds, ending
with the seat belt buckled.
NOTE: Watch for the Seat Belt Warning Light to turn on
while unbuckling and off while re-buckling the seat belt.
It may be necessary to retract the seat belt.
4. Turn the ignition switch to the LOCK position. A
single chime will sound to signify that you have successfully
completed the programming.
The Enhanced Warning System (BeltAlert) can be reactivated
by repeating this procedure.
@@chazpages OK I got it after three times. I was doing it with the door open. DUHH Thanks for the reply
Thank u, but where did you purchased the usb from?
My ford fiesta has spot where it usually would have a cigarette lighter but it just has a permanent cap, why do manufacturers do that and can i add a charging port there?
It doesn’t matter which wire - or + you tap into as long as you don’t have voltage on both wires ?
more or less. You want to use power (both neg and pos) that would normally go to the window motor. Also you need to be careful that the wire without a (+) isn't a wire that normally has no voltage unless you're operating the window (like the signal wire for the window or something).
🤔 door panels huh. Good wiring instructions, i don't think the door panel is the most effective way with a family i can see anyone accidentally leaving dangling cables or someone opening the door while the kid is charging an iPad i can see that iPad flying across into the ground.
Thank you! Now my dog can charge his tablet and stop barking
dogs? lol
Great until I open the door and forget my phone is attached.
What dog that you know of HERO, smokes or powers a device? Get it together...
Charles, next time have the wiring diagram or else....
Don't Ya wanna test it first Charles? Cheese & Rice!!!