I've bind my controller, I've bind the vtx. My issue is the motors cannot be reversed through betaflight. Can't fly it. It is always on the wrong direction. What should I do?
Did you build it by yourself? It's using a custome ESC firmware as far as I can remember. If you need go reverse the motors and don't want to do it using the ESC configurator you can simply switch the motor wires.
Okay this setup with the VTX being powered when connected to USB on is not good idea. I updated the ELRS RX which take just about 2 or 3 minutes and now the VTX overheats and shuts down in about 30 seconds.
The only two thinks I don't like are: flight time below 4 min and type c connector(because I can use only the phone). For the rest it looks pretty good. Thanks for this review
Hi Gal ... great review as always! The truth is not if it is a headache or laziness what I feel when I see that minimalist white radio design and I know I have to connect it to the pc and remember what the hell! And this is unfeasible in the field of flight .... I DO NOT understand that it is useful to save a few pesos in an economic radius if on the other hand you have to buy a laptop that is worth 20 times more .... it will be stinginess, negligence or stupidity .. ..In my flight group to have that radio is frowned upon and criticized ..
I’ve literally never used a screen on my radio after day one. Most people will configure their stuff once and forget about it, so this is a great radio for us.
How in The world did you get yours to work. Lol. Betafpv did a giveaway and every single person that got this package isn't working and they obviously can't help us. We are bound to the Meteor 85 and all of the channels move in betafight. But our throttle channel is jumping all over the place like the baud rate isn't right it or something. So therefore it can't get a steady signal so it just keeps saying RX loss or a bad RX. back and forth. One guy got at the arm for a fraction of a second but then it fail safed again. While saying 99%rssi too
@@KremerFPV They haven't answered yet but one of the guys supposedly figured it out by reflashing to 4.3rc and set dshot_bitbang = off in cli. I haven't tried yet but a few other have already got theirs to work this way. It was like the baud rate of the spi rx didn't match the baud rate of the fc. So it was getting inconsistent signals, every few cycles
I had nothing but issues trying to bind my first ELRS drone until I found this video. Thank you so much for the shortcut!
I'm glad you got it working!
85mm 2s is my favorite outdoor whoop size.
Yes, small but still powerful :-)
I already have a 5x more expensive radio and I ordered this one on release day. It’s all most of us need.
It's nice to have something that you don't need to worry about breaking it. Have fun!
Love it.right up our street.great work gal as always buddy
Thanks man!
Awesome flying and review, Gal! 😃
Stay safe there with your family! 🖖😊
Thank you! You too!
I don't have elrs radio, can i put frsky receiver on this quad's flight controller?
Check out the 1hr extreme gimble stress test on the betafpv lite radio 3 that Old Bee FPV did. It's crazy good
Interesting test :-)
Nice flying...can you gauge how powerful it is comparing to the original mobula 7 2s.
Thanks. Probably about 10-20% more powerful if I have to guesstimate.
Nice combo, I order booth before 2 week’s, can’t wait to put my hands on it. Thx for review ;)
My pleasure. Have fun and happy flying!
Would you say the elrs version has better range than the frsky version
I've bind my controller, I've bind the vtx. My issue is the motors cannot be reversed through betaflight. Can't fly it. It is always on the wrong direction. What should I do?
Did you build it by yourself? It's using a custome ESC firmware as far as I can remember. If you need go reverse the motors and don't want to do it using the ESC configurator you can simply switch the motor wires.
Can you calibrate it by pressing the set up button just like the lite radio 2SE ???
Please check the user manual: support.betafpv.com/hc/en-us/articles/4412082282009-Manual-for-LiteRadio-3
Hi, can i connect
LiteRadio 2 SE Radio Transmitter (ExpressLRS 2.4G) to this drone Meteor85 Brushless Whoop Quadcopter (2S)
ELRS 2.4G ?
Hi, sure.
This works with crsf nano tx?! Thanks for sharing! So the only cons with crsf is that you can’t really configure it but it works?
My pleasure. As far as I can tell - yes.
How to run Betafpv Configurator on windows 8 ? Not 10 or so.
Please test and find solution ?
Sorry but I don't have a windows PC.
what do you think the range of this controller on elrs will be?
The max power is 100mW and it can get you very far, even with the internal antenna of this TX.
Okay this setup with the VTX being powered when connected to USB on is not good idea. I updated the ELRS RX which take just about 2 or 3 minutes and now the VTX overheats and shuts down in about 30 seconds.
Wow this is very unfortunate :-(
The only two thinks I don't like are: flight time below 4 min and type c connector(because I can use only the phone).
For the rest it looks pretty good.
Thanks for this review
What do you mean you can only use the phone?
@@FilipRadelic i mean that i can put it in the phone but not in the pc because i don't have the type c on my laptop
@@damianomotta1809 you don't need a USB-C port on your laptop, just get USB-A to USB-C cable.
@@FilipRadelic yeah, but i don't have that
@@FilipRadelic btw yeah you are right, but still a downside of not having a normal port on the fc
Wow. It can run at 500hz, that is a step for them
Hi Gal ... great review as always! The truth is not if it is a headache or laziness what I feel when I see that minimalist white radio design and I know I have to connect it to the pc and remember what the hell! And this is unfeasible in the field of flight .... I DO NOT understand that it is useful to save a few pesos in an economic radius if on the other hand you have to buy a laptop that is worth 20 times more .... it will be stinginess, negligence or stupidity .. ..In my flight group to have that radio is frowned upon and criticized ..
Please ask beta by a 1dollar screen ...😏🤔🙄
I’ve literally never used a screen on my radio after day one. Most people will configure their stuff once and forget about it, so this is a great radio for us.
Thanks Humberto, well I agree with Filip :-)
It's a minimalistic radio controller and no screen is needed in this one in my opinion.
i cant bind them to each other
Did you sort it out?
@@KremerFPV yeah
@@YoungGhillie great. Happy flying!
How in The world did you get yours to work. Lol. Betafpv did a giveaway and every single person that got this package isn't working and they obviously can't help us. We are bound to the Meteor 85 and all of the channels move in betafight. But our throttle channel is jumping all over the place like the baud rate isn't right it or something. So therefore it can't get a steady signal so it just keeps saying RX loss or a bad RX. back and forth. One guy got at the arm for a fraction of a second but then it fail safed again. While saying 99%rssi too
That's really weird. What did BETAFPV say about it?
@@KremerFPV They haven't answered yet but one of the guys supposedly figured it out by reflashing to 4.3rc and set dshot_bitbang = off in cli. I haven't tried yet but a few other have already got theirs to work this way. It was like the baud rate of the spi rx didn't match the baud rate of the fc. So it was getting inconsistent signals, every few cycles