(Easy) How to tint tail lights with air release tint. Tinting tail lights pros and cons. By @ckwraps

Поділитися
Вставка
  • Опубліковано 27 чер 2024
  • Showing you how easy it is to tint your tail lights using Vvivids smoke air release tint
    Subscribe to our mailing list at www.ckwrapstoronto.com
    Register for certified workshops here
    www.vvividhq.com/get-certified
    Get Light Smoke Headlight Tint Here
    amzn.to/2LHgn4w
    Flexible Magnetic Tape Measure Here
    amzn.to/2ORwKdk
    Get The Squeegee Here
    amzn.to/2NZfy5s
    Certified Training visit
    www.vvividhq.com/get-certified
    Get 3m Knifeless Tape here amzn.to/2K7H69J
    Get my heat gun here from Amazon amzn.to/2MpqJ6C
    Get my magnets here from Amazon amzn.to/2y4MSUM
    Get my knife here from Amazon amzn.to/2LNufqm
    Get my wrap gloves here amzn.to/2MqO07Y
    Get Vvivid Shield Guard here amzn.to/2MmMOm4
    Get Vvivid air release tool here amzn.to/2MgAseq
    Get Monkey Strip felt buffers here 5 pack amzn.to/2JNXbkC
    Get Monkey Strip felt buffers here 50 pack amzn.to/2JztSTJ
  • Авто та транспорт

КОМЕНТАРІ • 196

  • @Josh-hr5mc
    @Josh-hr5mc 7 років тому +28

    Perfect shade of tail light tint, half the reason I haven't tinted mine yet it because most sites are selling darked out blacked out tints rather than a smoked shade

    • @Ash-kb9hn
      @Ash-kb9hn 3 роки тому +3

      The completely blacked out ones look like shit most of the time.

  • @brandonh6838
    @brandonh6838 4 роки тому +3

    Thank you for all these walk throughs! Just did my front/rear lights & reflectors as well. Used Vvivid light Hex tint and it looks amazing. Definitely would not have been able to figure it out on my own. Thanks again!

  • @jessesantamaria6863
    @jessesantamaria6863 7 років тому +2

    great job chris !! really good man.. love your videos bro !

  • @wendyhall24
    @wendyhall24 7 років тому +3

    Looks great!

  • @gregpruitt1647
    @gregpruitt1647 5 років тому

    I just completed a tail light tint on my C6 Corvette which has slightly domed shape. Because the tail lights on the Vette are recessed, I had to remove them from the car. I used a light tint using Vivid Air Release tint. Great material! It was as easy as applying Vinyl. Because of the air release channels, there are absolutely no air bubbles trapped under the film. Thanks for this, and all your videos.

  • @girl600podcast
    @girl600podcast 6 років тому

    The car is crazy. Love it

  • @Smokin07ram
    @Smokin07ram 7 років тому +2

    Looks sick Christian!

  • @namorbrowneyes
    @namorbrowneyes 6 років тому +1

    Gahd you do great work. Light smoke is da shiiittznit

  • @ThePatrickBateman69
    @ThePatrickBateman69 6 років тому

    Excellent video as always. Interesting to see the spectrum of price going anywhere from Vivid to Lamin-x to Oracel when it comes to headlight/tailight tint. I also prefer dry application because I never have to worry about the edges collecting solution and therefore not tacking properly.

  • @xMarkuzx
    @xMarkuzx 3 роки тому

    This tint is great, not too dark like others.

  • @jennifermedrano5527
    @jennifermedrano5527 3 роки тому +6

    Wow I’m glad I stumbled across this video, I love this tint. I’m going to give it a try 😄

    • @ChrisLaw84
      @ChrisLaw84 3 роки тому

      dont !!! lol

    • @yammmit
      @yammmit 2 роки тому

      @@ChrisLaw84 why? always heard it was really good.

  • @blacksheep6400
    @blacksheep6400 Місяць тому

    Looks perfect i will do mine next week

  • @SylhetBAULA
    @SylhetBAULA 6 років тому

    Thats a nice E55 AMG Coupe

  • @MrNenemott
    @MrNenemott 7 років тому +1

    Hi Christian, great work, What vinyl do you recommend for a beginner , I am learning, thanks

  • @frostshock13
    @frostshock13 3 роки тому

    I knew I had seen this before, I tried a wet kit on my porsche headlights it went not great. Going to give this a shot since it's more like normal vinyl wrapping.

  • @jonasvandebuerie8266
    @jonasvandebuerie8266 6 років тому

    Agressive lookin car. Love it

  • @UncleNutt
    @UncleNutt 6 років тому

    Just received my smoke tint and green tint. For headlights from vivvid. Super excited to see if the hours of video have rubbed off. I’m already usually good with my hands and I have an attention to detail so I’m hoping I can make it go fairly smooth my first go at it. It came with a cheap little yellow squeegee I’m wondering if maybe I should hold off and order one like the blue one you’re using with the felt tip. I’m guessing the yellow one they sent is more for tucking in areas. Am I correct in assuming that?

  • @jamessowder193
    @jamessowder193 2 роки тому

    I'm gonna try the light smoke, the one you did. The tail lights on my Cadillac CTS are a deep dark red so I think that's all I'll need for the look I'm going for. I hope anyway. Thanks for the video bro, I appreciate it. We'll see how it turns out.

  • @MindRightLifeRight
    @MindRightLifeRight 7 років тому +2

    wow seems a lot easier than oracal. Sometimes wrap wont stick if you add too much water. thinking about trying this material

  • @primevisionx
    @primevisionx 6 років тому

    Hey bro, nice tutorial. What rims do you have? And can you remove the tint if you dont want it anymore? Thanks

  • @JustRideZipp2001
    @JustRideZipp2001 7 років тому +25

    I really like that the lighter tint is suddle enough to not get noticed to much, but still change the look of the car. My car is gun medal grey and I know what I'm doing with the tail light now. Thanks !

    • @kungfublob5951
      @kungfublob5951 6 років тому +10

      :| suddle?!?!

    • @user-fw3sw7qx1u
      @user-fw3sw7qx1u 5 років тому

      Lolol ikr suddle hahaha

    • @DooMGo2It
      @DooMGo2It 2 роки тому

      @@kungfublob5951 And gun medal? Suddle surely sticks out more.

  • @ashleymakeup663
    @ashleymakeup663 4 роки тому

    Love your videos bro. I tried to ti my my head lights n tail lights myself but failed miserably. I'm really getting a har d time after doing the flat surface n move around to the curve it's really hard to stretch it how it ends up with ruffles on an impossible position . Only thing I think I can try next is that I kind of angle your tin us a bit is that a key objective ? My car is a 2009 Toyota fielder .

  • @X20c3ntX
    @X20c3ntX 3 роки тому

    Best video in the game

  • @AssadNiang
    @AssadNiang 7 років тому +1

    Nice job!
    I wish you guys were closer so I can have you do my tail lights. I have watch this video 100 of times and still cannot get it done right on my 2015 nissan murano. Those tail lights are a little tricky because of the curvature, I always end up with stretch marks. I have wasted 2 rolls of vivid film, and gave up at the end. I have not found anyone in my area who knows how to do this, I am in MD.

  • @salimsopari
    @salimsopari 3 роки тому +3

    That turned out real nice. I'd like you to do some work on my 2010 Acura TL. Where is your shop located?

  • @Luqueyluque
    @Luqueyluque 6 років тому

    not usually a fan of Mercs but that light tint really brings out the aggressivenesd of the car

  • @xceddie
    @xceddie 6 років тому

    Hey what color wrap is on your car? It's looks awesome, it's like a Matte Gray

  • @htconex19062012
    @htconex19062012 5 років тому

    Great tips

  • @suhailjamil3909
    @suhailjamil3909 4 роки тому

    Wow that is the perfect shade. I'd like to do same with my 2017 M4 but ever so subtle. Seen so many darker tints which really put me off. What tint shade have you used? It's absolutely on point looks perfect shade to me bro...

  • @gungfuman
    @gungfuman 7 років тому

    do you have a how to install headlight overlay video?

  • @buddy77587
    @buddy77587 6 років тому

    Awesome!

  • @leotorres1792
    @leotorres1792 Рік тому

    Thank you soo much I found what I was doing wrong (I had roll back on my tail lights for a while ) now imma fix my mistake

  • @wilsonnarayan7269
    @wilsonnarayan7269 2 роки тому

    Thank you

  • @00jeeptjdb
    @00jeeptjdb 6 років тому

    I want to see how u would do the 2015 f150 headlight with the part in middle that sticks out please. I ruined 4 pieces just trying to get it right

  • @qwerty01l
    @qwerty01l 7 років тому +2

    Can the color lamp material be bought in Taiwan?

  • @TheNeedleGuy
    @TheNeedleGuy 6 років тому

    Quick question! After tinting the taillights, are the reflectors in the taillights no longer reflective in this film?

  • @dazedmovies
    @dazedmovies 5 років тому

    Do you think this will work for some chrome parts on my car? I'm not really wanting a chrome delete as much a chrome darkening.

  • @squidgyblack3321
    @squidgyblack3321 4 роки тому +2

    Niceee what percentage tint was that?

  • @Windowtintingqueen
    @Windowtintingqueen 6 років тому

    I seriously need to learn how to tint tail lights.

  • @blueprintstech5638
    @blueprintstech5638 6 років тому

    Is the film you used the light smoke air tint plus

  • @bfd1918
    @bfd1918 3 роки тому

    Bravo..!! Thanks

  • @JUNJUN-lw2vr
    @JUNJUN-lw2vr 7 років тому

    do you have videos on corvette c7?

  • @harryl8234
    @harryl8234 4 роки тому

    Can this type of film tint be removed without leaving adhesive residue on the tail lights or headlights? If so how years could the tint be left on before the adhesive residue becomes difficult to remove when removing the film tint?

  • @rodvailsore9858
    @rodvailsore9858 7 років тому +1

    please what's the vinyl size I have to buy for full car wrapping?

  • @jorgeagarcia9557
    @jorgeagarcia9557 3 роки тому

    Excellent

  • @KantstandlamGarage
    @KantstandlamGarage 7 років тому +5

    I gotta place an order for my own car. Maybe Ill take a trip down and pick some up from you Christian.

  • @frankmay5470
    @frankmay5470 7 років тому

    What was used on the chrome piece below the emblem? Is that a black chrome vinyl?

  • @mikexcanxjerk
    @mikexcanxjerk 3 роки тому

    If you can please answer that would be great , what percentage tint was this on the benz

  • @DarkOkami7
    @DarkOkami7 7 років тому

    Yes was just. gonna look up a how to vid be wanting to do mine forever

  • @marc_svsengineering4319
    @marc_svsengineering4319 7 років тому

    I used the smoked flat tint from Vvivid to match my ghost blue. I ended up ripping it off as the headlights (brights) generated enough heat to melt, or create a bubble that ended up destroying the look on that spot. So basically be aware of your lights if they create a lot of heat on your lenses.

  • @rickb6726
    @rickb6726 5 років тому

    Are the emblems wrapped also or sprayed?

  • @raymondrobitaille6952
    @raymondrobitaille6952 7 років тому

    Do you have a video doing an F150 truck???

  • @polluxtroy69
    @polluxtroy69 7 років тому

    how can I get hold of some of this tint? would look great removing the red from the back of my steel grey car.

  • @nickp1868
    @nickp1868 7 років тому +46

    You should really think about adding all social media and website links in the description of these videos.

    • @KantstandlamGarage
      @KantstandlamGarage 7 років тому +2

      He uploads every video through his phone so you’re limited to certain stuff. Im sure he’s been real busy with the business so its hard to add some free time to get onto the computer and add the information in the description. But I feel you on that. He post most of his stuff on Instagram.

    • @nickp1868
      @nickp1868 7 років тому +2

      Ah I see, didn't know that, was just making a suggestion to get more traffic to his business. Maybe in the future once life isn't so hectic lol.

    • @mrphantomx8009
      @mrphantomx8009 7 років тому +5

      I agree 100%

    • @qwerty01l
      @qwerty01l 7 років тому

      Will the membrane material brand?

    • @zGiGi
      @zGiGi 6 років тому

      You should also link tools that you used and materials. Thanks

  • @mikexcanxjerk
    @mikexcanxjerk 3 роки тому +1

    Can you please tell us, what exact percentage this tint was plzz ?

  • @cazdalvair9769
    @cazdalvair9769 7 років тому

    What wrap did you use?

  • @crystrezerex2life
    @crystrezerex2life 3 роки тому

    Does your sgueegy scratch up the tint when pushing out the bubbles?

  • @richardharvey1637
    @richardharvey1637 4 роки тому

    What temp heat gun do you use?

  • @aricmagallanes4525
    @aricmagallanes4525 3 роки тому

    What should I do if I want my reverse light to be clear? It’s all one piece to

  • @maineoutdoors8227
    @maineoutdoors8227 2 роки тому

    Is the tint you used the vvivid light smoke or smoke black gloss? Video says light smoke but linked item is the smoke black gloss. I know its not the dark smoke but debating between these 2 other types and wanted to confirm which was in the video. Great tutorial btw. Been watching a lot of your videos recently and you do a great job explaining the steps.....well done!

  • @inthelifeofleif8268
    @inthelifeofleif8268 4 роки тому

    Have you ever done a 2014 Lexus ct 200?

  • @feliprea5504
    @feliprea5504 6 років тому +1

    Where can I buy the material to tint mine? Thanks.

  • @brentmorgan1652
    @brentmorgan1652 3 роки тому

    What does it mean if the tail light film lifts or damages the surrounding film on the car? I had this issue. When I lifted the excess film to adjust, it caused a wrinkle in the surrounding film.

  • @bronnilhawill7557
    @bronnilhawill7557 Рік тому

    What rims do you have on your car? I love the concave

  • @lexusweekdevicelv
    @lexusweekdevicelv 6 років тому

    hi. how the film is called for a headlight?

  • @949surferdude
    @949surferdude 6 років тому

    Is the film removable later on with out making any permanent marks? How does it hold up in hot humid weather?

  • @karl-christianlarsen6806
    @karl-christianlarsen6806 7 років тому

    Christian, how dark is the tint in %? Wondering if I want 70% or 50%

  • @jocalibusohump
    @jocalibusohump 6 років тому

    Nice

  • @LurkMoar101
    @LurkMoar101 7 років тому +2

    Hey brother, another fantastic how to. One question I have is because the tail/headlight tint adhesive is so aggresive, when tacking it down onto a panel with existing vinyl wrap (or even paint) is there any chance that when youve trimmed the light out and are pulling the excess tint away it damages the existing wrapor paint on the panel? I mean, I worry just sticking masking tape to vinyl let alone a more aggressive film.

    • @CKWraps
      @CKWraps  7 років тому +1

      +LurkMoar101 hey, it will be fine as long as you remove it properly. Good quality vinyl should never harm the surface below it

    • @LurkMoar101
      @LurkMoar101 7 років тому

      Thanks for the quick reply my friend. And thanks for making these videos.

  • @ottok9338
    @ottok9338 6 років тому

    What wheels are those on the mercedes??

  • @JohnLetra
    @JohnLetra 7 років тому

    i wana tint my e60 tail light how much tint do i need 2ft x5 ft?

  • @anhphan1625
    @anhphan1625 6 років тому

    Anyone know where I can buy that same tint film he have

  • @Kidelastico
    @Kidelastico 6 років тому

    Where can I buy the tint ?

  • @genaroramos4697
    @genaroramos4697 6 років тому

    Is this tint smoked dark or matte?

  • @JosephRedondo
    @JosephRedondo 6 років тому

    What kind of wheels are those?

  • @southjersey1000
    @southjersey1000 6 років тому

    What color is that wrap?

  • @Michel_nn
    @Michel_nn 6 років тому +2

    I've watched few vids about tail light tinting, and I've been wondering why some people do a wet application while some others just put it on dry. Any pros and cons about this subject?

    • @jetsshowbruh7617
      @jetsshowbruh7617 4 роки тому

      I know right

    • @slow_rednline4874
      @slow_rednline4874 4 роки тому +1

      Because this isn't tint..it's like wrap..it goes on dry

    • @slow_rednline4874
      @slow_rednline4874 4 роки тому

      @@jetsshowbruh7617 I used smoke black ..I have a video of how it looks..it's actually on my headlights as well.it still has very good visibility

  • @emeymaulanayurdeksi6458
    @emeymaulanayurdeksi6458 4 роки тому

    May i know what colour is it?

  • @mugenrios2k
    @mugenrios2k 5 років тому

    What % tint is that?
    Also is this film capable of being stretched over the 5th gen 4runner tail lights. The 5th gen Tails are crazy with unique shapes and protrusions.

  • @megamorphe
    @megamorphe 3 роки тому

    I left the scratch protector on, how do I remove it now? I spent so long trying. Blade, finger nail, screw driver metal edge, nothing is lifting it :(

  • @markrodriguez2137
    @markrodriguez2137 6 років тому

    How do we contact you for film purchase??want to light smoke 17 accord taillights,and headlights.Thsnk you.

  • @simbachauhan984
    @simbachauhan984 3 роки тому

    So using need to use water ?

  • @mariomora4458
    @mariomora4458 4 роки тому

    What color is the exterior ??

  • @mickmcmick8247
    @mickmcmick8247 3 роки тому

    what percentage is this tint?

  • @buddy77587
    @buddy77587 6 років тому

    Total look

  • @g8beast679
    @g8beast679 7 років тому

    Nice one. What wrap is on the car?

    • @wendyhall24
      @wendyhall24 7 років тому +1

      G8 Beast I believe he mentioned the color in the beginning of the video - matt slate grey. The color is sick!

  • @alerodrigvez4956
    @alerodrigvez4956 2 роки тому

    Does anyone know the size of the roll? I wanna try this on my E550 coupe as well 🥵

  • @jovi_3572
    @jovi_3572 5 років тому

    Is it illegal to tint headlights and taillights in Mass?

  • @TrailRiderTN
    @TrailRiderTN 2 роки тому

    Does this film protect against UV?

  • @redihoxha2940
    @redihoxha2940 6 років тому

    How dark is it?

  • @DavePianist
    @DavePianist 4 роки тому

    Is this legal in Ontario?

  • @bradjohnson152
    @bradjohnson152 6 років тому

    On lights with alot of curve and angles, can you post heat this film?

    • @slow_rednline4874
      @slow_rednline4874 4 роки тому

      Yes you can.. look at my page can..it's done on my headlights and taillights

  • @samsayidi5697
    @samsayidi5697 6 років тому +3

    my dude you look like FaZe Teeqo lmao

  • @blokkeerme
    @blokkeerme 6 років тому

    Hey come over to the Neterlands and do it on my friends Scooter

    • @LenadTJ
      @LenadTJ 6 років тому

      Haha that must be one special scooter!

  • @skier44life
    @skier44life 6 років тому +1

    Hi great look what is the percentage of hue that he used and most importantly, where take this paper to tint? It's a 3M?

  • @juliusagapito4810
    @juliusagapito4810 5 років тому

    Does do film gets off when I wash the car? Thanks!

  • @ls2memo
    @ls2memo 7 років тому +1

    What's up Christian ! Just wondering what kind of alcohol you mentioned you use ?

    • @CKWraps
      @CKWraps  7 років тому +2

      +97JUNIOR_ we use 70% isopropyl alcohol

    • @ls2memo
      @ls2memo 7 років тому +1

      Thanks for the quick response .

    • @Nonx47
      @Nonx47 6 років тому +2

      This is a video... Why didn't you just go back to that point on the video to see what he said?

    • @nicbainbridge3413
      @nicbainbridge3413 6 років тому +1

      He uses crown royal

    • @calvina9090
      @calvina9090 6 років тому

      Smirnoff ice too

  • @sheldonm3535
    @sheldonm3535 7 років тому +16

    What film is that? Perfect shade of dark. This is coming from someone who hates tinted tails. I just don't like the super dark ones not safe. But this is unique

  • @irnesbegic8892
    @irnesbegic8892 6 років тому

    Hey christian,i ordered headlight/tail light tint from vvivid.do i have to post heat the tint just like with vinyl wrap?

    • @CKWraps
      @CKWraps  6 років тому +1

      +Irnes Begic depends on if there's tension on the edges or not

    • @irnesbegic8892
      @irnesbegic8892 6 років тому

      CK Wraps thank alot man. I started wrapping my car yesterday and finishes my hood. Couldn't have done it without your videos 👍🏻

  • @Buckeyes202
    @Buckeyes202 6 років тому

    Light tint still keeps the car classy unlike that completely blacked out tint