It all depends on how loud the volume is set, but on like 70% it lasts about 7-8 hours They’re just regular speakers but you get pretty good low frequency there.
@@floatinggears7515 I have a 12v power supply for RC Battery Chargers. Could I put a Lithium Car battery or an AGM Car Battery and have the 12V power Supply running to the Battery and then the Battery running to the Amp(s) I’m planning on using? I was going to do one Car Battery then a 100x4 and a 200x2, hook the Mids and Tweets active off my Pioneer DEH-7200BT, and DEQ-9200. 1 or 2 sets of Mids and Bullet Tweeters and a 6.5 or 8 inch Midbass or Sub set it up so the Mids/Tweeters are in one chamber and the Midbass or Sub in it’s own ported Chamber.
He just connected each speaker wire from the head unit to each speaker. Wired red & yellow together then connected positive to battery to those. Then the black on the head unit goes to the negative on the battery. He added a quick connector to the battery positive and negative to be able to recharge. Kind of simple.
The pvc pipe increases acoustic output of the low frequency range. I had to make it as if it is longer than a straight ducted port, which is very useful for use in compact systems when port length is often restricted.
How you get a hole saw that big
I’m in the process of doing one with the same radio not sure what I’m doing wrong but no sound is coming out
I’m in the process of doing one with the same radio not sure what I’m doing wrong but no sound is coming out 2:54
Some insulation on the inside would have it booming even better but obviously it’s not needed
How long does the battery last? Just recharge once it's dead? Are the bottoms subs?
It all depends on how loud the volume is set, but on like 70% it lasts about 7-8 hours
They’re just regular speakers but you get pretty good low frequency there.
@@floatinggears7515 I have a 12v power supply for RC Battery Chargers. Could I put a Lithium Car battery or an AGM Car Battery and have the 12V power Supply running to the Battery and then the Battery running to the Amp(s) I’m planning on using? I was going to do one Car Battery then a 100x4 and a 200x2, hook the Mids and Tweets active off my Pioneer DEH-7200BT, and DEQ-9200. 1 or 2 sets of Mids and Bullet Tweeters and a 6.5 or 8 inch Midbass or Sub set it up so the Mids/Tweeters are in one chamber and the Midbass or Sub in it’s own ported Chamber.
Wish he would’ve went over the wiring process in detail
Same thing I was thinking
He just connected each speaker wire from the head unit to each speaker. Wired red & yellow together then connected positive to battery to those. Then the black on the head unit goes to the negative on the battery. He added a quick connector to the battery positive and negative to be able to recharge. Kind of simple.
@@ernestcole1309 am using a amp with mine how do connect radio
What’s the purpose of the pvc pipes?
The pvc pipe increases acoustic output of the low frequency range.
I had to make it as if it is longer than a straight ducted port, which is very useful for use in compact systems when port length is often restricted.
He'll yes goodjob
Thank you!
😱😱😱😱😱😱😯😯😯
I’m in the process of doing one with the same radio not sure what I’m doing wrong but no sound is coming out