Unbelievable..my eyes seeing the video and my brains like wtf..not even the Bluetooth speakers in stores eye catching like this here you are truly amazing 👏👏👏
This was awesome to watch. Thank you. I used to build my own, and for my friends, speaker boxes. Over 35 years ago. This has inspired me to build again!
Я только невкурил это 12 вальтовка получилась на 7 тысяч? 7 тысяч это же мало для такой бандуры.а так все что бы я заменил так это динамики,нах они нужны по 300 ватт то.и 100 хватило бы даже 50-75..
its look like great technology only from outside, but inside components and this scheme isnt a better way for this DIY. By the way, boombox assumes powerful sound and speaker flexing, that isnt observed here... 6 real watts of 30 (for 1 channel) critical available of this speakers.
Выглядит круто, но, несколько советов: ВЧ надо было ставить по краям, для расширения стерео базы Зря использовались динамики на 8 Ом, им явно не хватает напруги На dc-dc поднять напряжение до 14,4, это типовое в авто, за одно и мощность вырастет.
Анатолий Бондин , а также: Перемычка между левым правым каналом Можно было набить корпус каким нибудь синтепоном Излучатель типа сабвуфер разместить на верхней поверхности и т.д. Хотя для такой магнитолы все просто отлично.
ветер теплый а ещё бы оставить питание магнитолы от аккумов, а кнопку выключения кинуть на АСС. Лично меня задолбало бы каждый раз ждать полной загрузки и настройки балалайки)
Ideally, the placement of tweeters is at the widest extreme possible. This helps separate the two channels to create a wide stereo field. This is why old boom boxes always have them on the outside edge.
Сами динамики должны быть в отдельных глухих корпуса друг от друга для лучшего объёма звучания. Так делается когда используются пассивные низкочастотные излучатели.
This was a great video this is how you should be teaching things in schools. Applied math art design creativity it would keep kids wanting to keep working on projects.
Норм! Но динамики нужно закрывать грилями. И в закрытый ящик нужно синтепон или вату укладывать. Так не происходит нагрева воздуха в кабинете, нет повышению жёсткости.
You are the king of Electronic . Im just an architect and thinking about your video and what you built.... I have nothing to say ,,,, Bravo ! / I just can build the box and coloring ,maybe attaching the speakers but nothing more !!!!!! good to see your video 👍😇
VERY GOOD! A robust and reliable construction with proper fixtures and components! Assembling the box panels with both glue and screws makes this very air tight, that adds depth to the Bass frequencies. I have done this type of speakers for my PC Audio System with larger components and almost similar in appeaaence. Congratulations! Thanks a lot!
Kdfk de darle gracias a la noche no se olviden que b s jajaja jajaja m de darle a g de la vida g a g y el amor hoy a ver si se v de hoy y gracias a Dios que k ya me hizo el viernes a la mañana en la mañana en la casa y gracias g a g y el amor hoy y gracias g a ver si puedo olvidar a la noche no me dejes bien gracias g a g y el amor hoy y gracias g a ver qué pasa
I built something like this way back in the 80's. Replaced the head unit in the 2000's with one that did mp3 and CD's. The battery's are a good move I used a couple of old emergency light 12 volt lead acid units. If I was to do it now I would probably fit external units that interchange with power tools. The Passives were a nice touch though and would help get the most out of it.
Yes you are correct but in the end it's not wide enough anyway to matter really. It should really have the compartments divided and the airspace calculated too, but it's a boom box not an audiophile device. And I dare you to show me ANY boom box that was produced that has Chambers and even a calculated airspace.
@@ytcute1993 you CAN but it won't matter. There is no such thing as a boom box with stereo separation unless the speakers are detachable. So again, it does not matter.
Greetings: I have done many a projects such as this since the 80s. I can build with more versatility, quality and durability than what is offered 2 consumers. I commend a fair job done here. Thumbs up.
Great build, just one tip for improvement: The tweeters should be as far away from each other to provide for better stereo separation. Also put them higher so that there's less chance that stuff lying around will block them. Other than that, again, thumbs up!
@@1one3_Racing What else do you mean? Let's not forget that this is not intended to be a high def stereo system. But whatever you can improve without a dime higher cost or effort is a good thing.
Na teoria tem um erro nessa caixa, não tá com divisão do grave/medio esquerdo direito, pro som fica mais limpo ao escutar estéreo pode-se se colocar como separação na caixa entre eles pra um não cortar o outro. Se for audio mono não interessa.
Great DIY, for shure is the best portable speaker build on youtube, you inspired me to make something similar, i have to learn little more about electronics boards and how to connect them...
Hello, I was impressed with your love and dedication in the construction of the device, now I even understand that you do it for your own use but because you don’t put it for sale, I would also be happy to be able to buy such a device! Strong hug!
How long will that battery pack last? I am going to do this build but I want to beef up the battery with a 10AH Deep Cycle Lithium. See any issues with that? I will have to beef up the charger. Amazing work!
@@ArthurCheesebag84 In what sense do you mean "plug up the passive resonators?" Do you mean take them out all together or add padding or something else?
@@ArthurCheesebag84 the bass would become boomy with a port in a small enclosure like this and it would add port noise as well. In smaller boxes you get more controlled and flatter bass response with passive radiators, that's why big companies use them.
Use 4-ohm speakers instead of 8-ohm, separate the airspace, and move tweeters to ends of box for more stereo effect. So much work to come up short in the execution.
LOL. Nothing wrong with 8ohms. My sennheiser headphones are 300 ohms for a reason. The trade off with lowering ohms is quality (generally speaking). And you will not hear stereo because the tweeters are 12 inches apart instead of 6. Stereo is overrated anyway.
@@urwholefamilydied 4-ohms are more efficient, thus longer battery life. Your headphones are working in milliwatts so you don't blow out your eardrums. And why would you invest in a premium headphone manufacturer if you weren't looking to hear the work put in by the audio recording engineer?
You have that backwards, while you can get more power out of an audio circuit with lower impedance speakers, it's more efficient and far less taxing on the audio circuit to use higher impedance speakers.
@@urwholefamilydied who cares about headphones impedance?? Talking about lowering the impedance, it is not lowering the quality. There are thousands of dolars hi-end systems on 2 ohm each cabinet..
@@keepingdistance4404 the efficiency doesn't come from impedance and, if they were 4 ohms the amplifier would have a lower efficiency and draw more current, so less battery life
Solid end result! Odd method to how you got there though. All that nice work with layout and soldering, only to mount all the components with tape and silicone. SO MUCH SILICONE. For anyone considering a build similar to this, you can make it a lot easier on yourself by cutting the speaker holes before cabinet assembly and by using a commonly available 12v DC adapter instead of the battery/BMS setup. Which means minimal soldering if any at all. Then you can spend the money you saved on a more powerful class D amp board, because those all-in-one android headunits don't put out much power at all.
Thanks, the main components are secured with screws, i used a soft silicone to seal the box, for the passive radiators to work the box needs to be airtight
I started the video thinking, I could build this. Once the wiring came into play...I thought damn...I could build this but I can’t wire all that shit! 🤣
Great skill set. This takes time and practice, doing such builds. I'm sure he didn't just jump out the gate doing this. But trial and error is a solid teacher. Awesome quarantine content.
Hello, i added subtitles in some parts of the video. Some of the most asked questions: -I build it for my personal use as an hobby, i don´t sell them. -In all my builds some things could be always better i know. -Parts list, song names and other infos in the video description. Thank you for the positive comments and constructive comments ;)
Very nice. I had thought about making one of these myself but I was going to use a pc power supply. I like your idea much better. Great job, excellent build quality!
ME : Going to home depot feeling excited getting the wood and all the equipment needed for this project. Then got home and starting to cut the wood and start making the housing. NEXT DAY... ME : going to bestbuy.
It’s not that hard man. Get a soldering iron and just connect it. I legit managed to replace my iPod 4G’s batter and if you didn’t know it needs to be soldered.
invictor strd still could on larger scale just use the concepts bud. Gonna do this for my works van (I’m a pool guy I get to take it home) build a bigamy’s box in the back w a car battery deck and subs etc. Then I can remove it if I have to switch vehicles or leave
This thing is wild, I had no interest until I watched and now I want to build one as well. I give you credit for assembling the box then coming through with the chisel. That part probably would have driven me most nuts. Putting the inputs and stuff in the back would have been the "almost there" point for me. Great work man! I'm sure the video doesn't do justice to the actual sound in your room there. I didn't see a cooling fan, I'm guessing the head unit gets enough air flow or just doesn't get that warm to begin with?
1 little tip, put black grills on those speakers, annoying kids always poke the damn speaker cones in and it looks horrible, my 2 cents AND YES I SPEAK FROM EXPERIENCE lol
@Agent X Because I'm too busy designing products to become a video producer too. Learn to take advice as a positive thing and not get offended. Life is too short.
That happened to me yesterday with my old laptop screen converted to a portable TV project. Everything was fine until I secured the cables with hot glue which melted through some cheap wire shielding and fused two wires. Took me half an hour to find where it happened plus more time to replace those two wires. All is well again.
Es un buen trabajo aunque sale muy alto el costo para hacerlo, sale mejor comprar algo ya hecho, y en el caso del proyecto es bueno como satisfacción de que es uno quien lo hizo.
Parts list:
Android radio 2GB: bit.ly/3VgiyPX
6.5" Speakers: bit.ly/39T6sGE
18650 Batteries: bit.ly/3FXorHZ
Tweeters: bit.ly/39T3RMS
Passive radiator: bit.ly/3PmvA93
Crossover: bit.ly/48y9rNn
DC module: bit.ly/3wv45Sa
18650 holder: bit.ly/3yGFPix
5S PCB : bit.ly/3wokhEI
5S indicator: bit.ly/42WUFia
Power jack: bit.ly/3sEJR7m
Switch: bit.ly/3NfBzL1
Mini switch: bit.ly/3Pk7uvP
Rubber feet: bit.ly/3IkvRXQ
Adjustable Drill bit: bit.ly/3wkDOXY
"Wire holder": bit.ly/3P4En0R
Multimeter: bit.ly/3wzMNU5
Check video description for more infos, thank you for watching :)
you sell these items
Do you sell
Unbelievable..my eyes seeing the video and my brains like wtf..not even the Bluetooth speakers in stores eye catching like this here you are truly amazing 👏👏👏
DTeK you should do a DIY ATMOS set up
im interested, do u put it on sell??
This was awesome to watch. Thank you. I used to build my own, and for my friends, speaker boxes. Over 35 years ago. This has inspired me to build again!
cool :)
super cool 👍💯
I'm just speechless when I see the quality of your work ! Very nice finish and good design.
Thanks
@@DTeK do you end up saling them? And how much? Do you shipped around the USA?
Agreed
Onde consigo uma dessas
@@djmarcusgiles5605 can you make one for me?
Золотые руки, золотая голова 👏👏👏.
Вот уж по истине - ,, хочешь сделать хорошо - сделай сам"
И на много дешевле!
Я только невкурил это 12 вальтовка получилась на 7 тысяч? 7 тысяч это же мало для такой бандуры.а так все что бы я заменил так это динамики,нах они нужны по 300 ватт то.и 100 хватило бы даже 50-75..
Bukan tanganya yang emas tapi otaknya cerdas
Yes golden hands
❤😂🎉🎉😢😅
Молодец! Очень высокая культура производства! Красиво.
Жаль только что где покупал не написал и сылок на колонки и уселок нету!
Культура термоклея.
Listen, man, you're just a genius of engineering and your hands are golden. ''
Thanks :)
@@DTeK Respect from Estonia! High class!
@@dealdeal2918 no hes not, theres so many flaws in this design. But for a DIY amateur its pretty good.
@@Flowxing can you mention few of em please
Thanks
Dude. That is the neatest DIY speaker I've ever seen. It looks like something you could really buy from a legit store
thanks, glad you liked
its look like great technology only from outside, but inside components and this scheme isnt a better way for this DIY. By the way, boombox assumes powerful sound and speaker flexing, that isnt observed here... 6 real watts of 30 (for 1 channel) critical available of this speakers.
As long as you dont look inside
You should sell them I'd buy one
@@ytcute1993 there's always one 🙄
Выглядит круто, но, несколько советов:
ВЧ надо было ставить по краям, для расширения стерео базы
Зря использовались динамики на 8 Ом, им явно не хватает напруги
На dc-dc поднять напряжение до 14,4, это типовое в авто, за одно и мощность вырастет.
Анатолий Бондин , а также:
Перемычка между левым правым каналом
Можно было набить корпус каким нибудь синтепоном
Излучатель типа сабвуфер разместить на верхней поверхности и т.д.
Хотя для такой магнитолы все просто отлично.
ветер теплый а ещё бы оставить питание магнитолы от аккумов, а кнопку выключения кинуть на АСС. Лично меня задолбало бы каждый раз ждать полной загрузки и настройки балалайки)
@@olegtsarenkoff , истинно!
@Felix Cotov , ну да. Из говна пуля.
Выглядит да, но внутрянка - колхоз колхозом.
Ideally, the placement of tweeters is at the widest extreme possible. This helps separate the two channels to create a wide stereo field. This is why old boom boxes always have them on the outside edge.
🇺🇸🏴☠️🇬🇧
🇲🇨🇵🇸🇯🇵🇬🇶🇮🇳🇦🇪🇸🇦🇨🇿
🇬🇧🏴☠️🇮🇱🇰🇷
Gshchfodjab oshszhXlb, BBM jsb iag kajb jajajsh jefbbsjsh xb d jwgsgudefv jrvag
Keren 😂
Эта лучшая самодельная колонка что я видел, молодец парень😉
Hamko ek chahiye
Все перечеркнуло отсутствие блока питания 220в внутри колонки. Объем позволяет, а так еще ссобой блок таскать, такое себе.
Недоработанная игрушка.
Молодец мужик! Respect from Russia//
Хопа руский
Русский мужик
@@Unkpphfsfjif Татар малай)
@@AR__77 я не татар
@@Unkpphfsfjif зато я татар
Anyone else just watching this to pass time because their state is in lockdown? Lol...
😂👌🏻
Where you're from?
U got that right.. philippines here
Brazil
Yup 1st day for me in NZ
Same😂😂😂
In future revisions, I reccomend you put the tweeters further apart to get more of a stereo effect from the box.
An extra ten inches of separation will do nothing to create a proper soundstage. It's a boombox. It booms. Relax.
*WONDERFULLY MADE AND SOMETHING THAT WILL LAST MANY YEARS!!*
Thanks
ВЧ динамики надо было устанавливать как можно ближе к краям колонки.. Стерео база в таком случае шире. А в целом, офигенно, поехал ка я за фанерой)))
Сами динамики должны быть в отдельных глухих корпуса друг от друга для лучшего объёма звучания. Так делается когда используются пассивные низкочастотные излучатели.
Нормас, мне зашло. На кухню бы такое замутить. Времени блин нет. Лойс как всегда👍👍👍
Можно сразу встроить в верхний ящик, крупам и макаронам понравится.)
Ivan Rogov ,та крупы и макароны, у меня в кладовке. А вот приблуда эта, реально зачётная.
QURWITREIRWIFEURWJTTIRWJFTDKAAAAAIEWJ
круто тут россияне есть !
Хорошо слелал, но твитеры долдны быть как можно дальше друг от друга, именно твитеры задают стерео картинку и я бы разделил ящик на левый и правый
This is pretty dope. I have a Bluetooth radio I never got around to installing in my car. Still brand new in the box. Gonna try this.
thanks :)
Wow! Not only my compliments for building the entire speaker, but the sound at the end of the video! Loud and clear! I’m impressed!
thanks, glad you liked
@@DTeK I enjoyed it for sure!
Jhhvjvjheuo
Hhiscmo
Хорошее видео. Начал смотреть в наушниках, потом уснул на кресле, проснулся в аккурат под конец. Спасибо.
The amounts of details is insane!!! LOVE IT!!!!!
Thanks, glad you liked
दोस्त एक हमको भी ऐसा बना कर दो कितना कपड़े चाहिए इसका प्राइस कितना होगा क्या तुम्हारा व्हाट्सएप नंबर है
This is really impressive. I am a pretty handsy person myself but even for me, this is FANTASTIC!
Very good!!! Watching from brazil🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
This was a great video this is how you should be teaching things in schools. Applied math art design creativity it would keep kids wanting to keep working on projects.
V
I watched this at 2x speed and saved 50% on my auto insurance
Willy Wonka - good day, sir
Thanks 🤘🏽
Genius
У тебя золотые руки!!! Круто сделано!!!
Excelente!! Parabéns! 🇧🇷👏🏼
Ele iria ter um resultado melhor usando um compensado mais espesso. No próprio vídeo é visível as vibrações da caixa.
@@RodrigoKoser eu teria usado uma bateria de moto, acredito que ficaria mais tempo ligado... Mas o projeto dele ficou show de bola.
Норм!
Но динамики нужно закрывать грилями. И в закрытый ящик нужно синтепон или вату укладывать. Так не происходит нагрева воздуха в кабинете, нет повышению жёсткости.
херню сказал)
Покажи свою колонку, посмотрим.
Only three tips:
1 - Change baterry for more quality cells.
2 - Insulation for speakers
3 - Voltaje is better 14.4V, equals car.
You are the king of Electronic . Im just an architect and thinking about your video and what you built.... I have nothing to say ,,,, Bravo ! / I just can build the box and coloring ,maybe attaching the speakers but nothing more !!!!!! good to see your video 👍😇
Thanks, its easy, just follow the schematic :)
Bloody genius!!! Looks so professional and better than most boom boxes out there! Well done Sir!😉👌🏾
Thanks
Perfect for self quarantine. Heavy sounds I liked it.
thanks
Just what I was thinking lol
VERY GOOD!
A robust and reliable construction with proper fixtures and components!
Assembling the box panels with both glue and screws makes this very air tight, that adds depth to the Bass frequencies.
I have done this type of speakers for my PC Audio System with larger components and almost similar in appeaaence.
Congratulations!
Thanks a lot!
thanks, glad you liked
Tank you bro
Orangnya super creatif. Orang Indonesia kagum melihat vidio ini. Salam dari Indonesia ❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Better sounding and looking than most sold in stores. Great build. Looks and sounds amazing.
How do u know it sound amazing?
When you assessable things in a way that you will never need to disassemble it and re-check again .. that’s confidence !
Kdfk de darle gracias a la noche no se olviden que b s jajaja jajaja m de darle a g de la vida g a g y el amor hoy a ver si se v de hoy y gracias a Dios que k ya me hizo el viernes a la mañana en la mañana en la casa y gracias g a g y el amor hoy y gracias g a ver si puedo olvidar a la noche no me dejes bien gracias g a g y el amor hoy y gracias g a ver qué pasa
Right...he prob has alot of experience in setting these up.
incredibly talented person) I would sell my soul for this column) I admire your talent)
I built something like this way back in the 80's. Replaced the head unit in the 2000's with one that did mp3 and CD's. The battery's are a good move I used a couple of old emergency light 12 volt lead acid units. If I was to do it now I would probably fit external units that interchange with power tools.
The Passives were a nice touch though and would help get the most out of it.
This is my Favorite one you have done! I want to Try to do this one! Amazing Job!
Thank you, apreciated !
Hi Dear....
Everything is cool only tweeters are set as far apart as possible for the best stereo effect !
Yes you are correct but in the end it's not wide enough anyway to matter really. It should really have the compartments divided and the airspace calculated too, but it's a boom box not an audiophile device.
And I dare you to show me ANY boom box that was produced that has Chambers and even a calculated airspace.
nobody knows what stereo is nowadays.
@@jimb032 anyway, all of this must be done wonderfully regardless of the destination
@@ytcute1993 you CAN but it won't matter. There is no such thing as a boom box with stereo separation unless the speakers are detachable. So again, it does not matter.
Сделано с душой 🔥
Но звук-то говно, всё шипит и бубнит.
@@alexandrvetelkin5196 и как можно это исправить?
Greetings: I have done many a projects such as this since the 80s. I can build with more versatility, quality and durability than what is offered 2 consumers. I commend a fair job done here. Thumbs up.
That's dope. I can't imagine what it sounds like in person.
Thanks, i´m very happy with the sound quality
It would definitely sound gr8 those speakers are 300w each
@@mayureshjoshi2261 those speakers aint 300w and even 100. 80W RMS at most lol
@@pmx2384 in the video while assembling the speaker, at tha back you can see it is mentioned as 300w so I thought in that way 😅
@@mayureshjoshi2261 it can only peak at 300 watts for a short time, it'll mainly Operate at 80 watts
And music from your own DIY speaker like this sounds better than others
for sure... u got Better Batterie POWER
Speakers vokal bass
Wood is the best material FOR 🔊🎶🎵🎼🎛✌✌✌🙋🏻♂️
or POWER FROM 220V /12V DC
Во Чувак Замутил !!!! Крутяк
Coolest Bluetooth speaker I’ve ever seen. Genius !
Круто!!! Красиво!!! И звучит!!! У тебя просто золотые руки!!!
И яйца всмяточку...
🤪🤗🤪🤗🤔
This man has 2 professions: 1st- woodworker and 2nd- electronic master.
And 3rdly screwmaster lol
This man has profession РУКОЖОП)))
Home Depot: "Sale on wood screws!"
You: "I have boombox tutorial coming up... I will take all of them."
🤣🤣🤣
Real nice. What makes it cool is that it's also portable.
It's even more crazy the fact he added a android based music player mostly used in cars and also made it give video output.
🤗
You can watch my videos also ❤️❤️
This is one of the best DIY I've seen. I want one...
Thanks, glad you liked :)
Great build, just one tip for improvement:
The tweeters should be as far away from each other to provide for better stereo separation.
Also put them higher so that there's less chance that stuff lying around will block them.
Other than that, again, thumbs up!
I think that's the least of the problems with this
@@1one3_Racing What else do you mean?
Let's not forget that this is not intended to be a high def stereo system. But whatever you can improve without a dime higher cost or effort is a good thing.
@@1one3_Racing yeah and i would have divided the 2 woofers into separate chambers. They look out of phase. But its still cool.
Oooo
@@1one3_Racing you sound like Ur head needs spun
красавчик , плей лист в описании отдельный лайк , слушаю музыку и представляю твой бумбокс)))
А я твою мамку
@@wotzefak-mazafak и тетку)
Бумбокс дерьмовый.
Que trabalho incrível, deu até vontade de ter uma.
Sim
Na teoria tem um erro nessa caixa, não tá com divisão do grave/medio esquerdo direito, pro som fica mais limpo ao escutar estéreo pode-se se colocar como separação na caixa entre eles pra um não cortar o outro. Se for audio mono não interessa.
Great DIY, for shure is the best portable speaker build on youtube, you inspired me to make something similar, i have to learn little more about electronics boards and how to connect them...
Thanks, glad you liked
Hello, I was impressed with your love and dedication in the construction of the device, now I even understand that you do it for your own use but because you don’t put it for sale, I would also be happy to be able to buy such a device! Strong hug!
Thanks ;)
DTeK what would it cost me for one? I’d pay you to make me one I’m a heart beat, possibly in red
How much are you both willing to pay ? I have a cnc and i make speakers, maybe we can work together guys
А были когда-то времена, когда небыло термоклея!)))
Брали эпоксидку, как и сейчас когда нет термоклея
А шуруповерт то был🤦♂️
Спермоклей
Я при разборе старых колонок 90х годов находил там нечто похожее на спермоклей. Но что за клей хз.
How long will that battery pack last? I am going to do this build but I want to beef up the battery with a 10AH Deep Cycle Lithium. See any issues with that? I will have to beef up the charger. Amazing work!
I'm blown away on your skills to build this awesomeness 👌
Incredible work. It sounds very heavy. This is the real hand made. So true 🔊🔊🔊🔊🔊🔊🔊🔊🔊🔊🔊🔊🔊🔊🔊🔊🔊🔊🔊🔊🔊🙏
thanks !
adjust the voltage for the headunit to 14.4-15v, less distorsions.
I second this. You will also have less touchscreen glitches. Headunits like that are designed to run off of 14.4v
Then plug up the passive resonators and add a tuned port.
@@ArthurCheesebag84 In what sense do you mean "plug up the passive resonators?" Do you mean take them out all together or add padding or something else?
@@ArthurCheesebag84 the bass would become boomy with a port in a small enclosure like this and it would add port noise as well. In smaller boxes you get more controlled and flatter bass response with passive radiators, that's why big companies use them.
Use 4-ohm speakers instead of 8-ohm, separate the airspace, and move tweeters to ends of box for more stereo effect. So much work to come up short in the execution.
LOL. Nothing wrong with 8ohms. My sennheiser headphones are 300 ohms for a reason. The trade off with lowering ohms is quality (generally speaking). And you will not hear stereo because the tweeters are 12 inches apart instead of 6. Stereo is overrated anyway.
@@urwholefamilydied 4-ohms are more efficient, thus longer battery life. Your headphones are working in milliwatts so you don't blow out your eardrums. And why would you invest in a premium headphone manufacturer if you weren't looking to hear the work put in by the audio recording engineer?
You have that backwards, while you can get more power out of an audio circuit with lower impedance speakers, it's more efficient and far less taxing on the audio circuit to use higher impedance speakers.
@@urwholefamilydied who cares about headphones impedance?? Talking about lowering the impedance, it is not lowering the quality. There are thousands of dolars hi-end systems on 2 ohm each cabinet..
@@keepingdistance4404 the efficiency doesn't come from impedance and, if they were 4 ohms the amplifier would have a lower efficiency and draw more current, so less battery life
Solid end result! Odd method to how you got there though. All that nice work with layout and soldering, only to mount all the components with tape and silicone. SO MUCH SILICONE.
For anyone considering a build similar to this, you can make it a lot easier on yourself by cutting the speaker holes before cabinet assembly and by using a commonly available 12v DC adapter instead of the battery/BMS setup. Which means minimal soldering if any at all. Then you can spend the money you saved on a more powerful class D amp board, because those all-in-one android headunits don't put out much power at all.
Thanks, the main components are secured with screws, i used a soft silicone to seal the box, for the passive radiators to work the box needs to be airtight
Awesome boombox, groovy selection tracks.
This is ultra level DIY😅not ordinary
Yes bro
@@keishamjoykumar8152 Actually i wanted to buit such speaker. But after seeing this, I changed my mind.🙏
@@aadithviki8290 why
@@keishamjoykumar8152 too complex bro. Can't make it
@@aadithviki8290 ok
I started the video thinking, I could build this.
Once the wiring came into play...I thought damn...I could build this but I can’t wire all that shit! 🤣
Yeah. Same here, my 100% enthusiasm to build a box deteriorated to only 5% when wirings came in. 😁😂
@Mr. Poopybutthole i'll try it, one of these days. Thanks.
Yes you can
Dummy people away from this! But it is simple!
W
very cool my brother. and very smart. his brain is still very fresh to do good work and work. enthusiasm and success for my friend😇🤝🥰
thanks :)
Great skill set. This takes time and practice, doing such builds. I'm sure he didn't just jump out the gate doing this. But trial and error is a solid teacher. Awesome quarantine content.
Como se llama la primera canción que pusiste??
@AngryBlack I'd accept one of them from you. Just let me know how. 👍🏾
@@putosgonzales1764 búscala en la descripcion del video
Hello, i added subtitles in some parts of the video.
Some of the most asked questions:
-I build it for my personal use as an hobby, i don´t sell them.
-In all my builds some things could be always better i know.
-Parts list, song names and other infos in the video description.
Thank you for the positive comments and constructive comments ;)
Great job bro!!! Saludos desde Colombia Latin America
How much was all the cost , and if you do happen to make another exact one will you sell it ?
How much it costs in total?
Heheheheheeheheeheheheheheheheeheheheh
What is the battery drain on this?
Felicitaciones, tremendo equipo!! Excelente sonido!! 👏👏👏👏👏🇦🇷🇦🇷🇦🇷
Por fin un argentino
@@agustinvidallet 👏👏👏👏👏👏
Saben que adactador de corriente se utilizaria para cargar ese equipo???
Perfect 👍. Only thing I would’ve done is add some speaker 🔈 guards in the front. Well done.
Uma obra prima, parabéns!!!!!
Это точно
Who gave this guy his Jedi Powers!
He needs one for real
Or who gave you the right of humiliating jedi powers, thinking all the works that you cant do are jedi powers?
God the creator, gives His creation to create. Glory to God. Drop heavens beat. Jesus loves you. Get km tune Jesus saves!
it looks not bad, but dont overrate it.
He was born with them
Very nice. I had thought about making one of these myself but I was going to use a pc power supply. I like your idea much better. Great job, excellent build quality!
thanks
@@DTeK vc uytiyuy a tuyuyuy
Wow ! Just come accross your channel, what a fantastic build !
thanks :)
Parabéns pela tua inteligência, que Deus possa continuar abençoando a tua vida. 🙏
فم كلهم خشم
CiLEA
ME : Going to home depot feeling excited getting the wood and all the equipment needed for this project.
Then got home and starting to cut the wood and start making the housing. NEXT DAY... ME : going to bestbuy.
Mantap Bang
Don't go to best buy and buy any of their audio garbage lol
Such a nice and clean build. Good job sir!
Thanks, glad you liked
But acoustics wrong
looks realy very good. the only thing i would change is the position of the tweeters in the left an right corner for a better stereo sound.
Unless you are listening less than a meter away the difference will be unperceptible
Awesome speakers, if u ever decide to sell one I would be very interested. Excellent job! Keep making them...
Try to make it
@@nanarokom9619 mea
Wow Almost 10M Views I m so proud of you 😍😋
Thanks:)
this is fantastic....i know what I'm doing while I'm stuck in the house due to covid-19
Honestly this is a great idea and well designed. Gonna subscribe now.
Am I the only one that was thinking "oh, I could do this" until he started with all the electronic stuff?
The wood stuff is my hang-up...😆
Nope. That part ended my enthusiasm as well.
Yes..lol
It’s not that hard man. Get a soldering iron and just connect it. I legit managed to replace my iPod 4G’s batter and if you didn’t know it needs to be soldered.
invictor strd still could on larger scale just use the concepts bud. Gonna do this for my works van (I’m a pool guy I get to take it home) build a bigamy’s box in the back w a car battery deck and subs etc.
Then I can remove it if I have to switch vehicles or leave
I would buy this ASAP I always wanted something like this with car speakers especially when working out or playing basketball outside.
Thanks
@@DTeK how to purchase it
How to purchase
Xin chào, bạn khỏe không ? Tôi mong bạn luôn khỏe mạnh
I'm not gonna do this 😂😂.. But it's cool watching you building this 🔥💥👌
Восхищаюсь вашей работой!!!
that was the cleanest build ive seen im following you now
It's your best project EVER! Amazing perfection
Thanks, glad you liked
That's really cool and I'm gonna watch this so hard, knowing that I'll never make this
St3ve_frog Tuhiri haha me too!
Which is so sad.
Exactly 🤣🤣🤣
This thing is wild, I had no interest until I watched and now I want to build one as well. I give you credit for assembling the box then coming through with the chisel. That part probably would have driven me most nuts. Putting the inputs and stuff in the back would have been the "almost there" point for me. Great work man! I'm sure the video doesn't do justice to the actual sound in your room there. I didn't see a cooling fan, I'm guessing the head unit gets enough air flow or just doesn't get that warm to begin with?
Thanks, its not necessary any fan, i did some air vents on the top of the radio :)
1 little tip, put black grills on those speakers, annoying kids always poke the damn speaker cones in and it looks horrible, my 2 cents
AND YES I SPEAK FROM EXPERIENCE lol
😂
you allow kids to be near your stuff?????? wow...
@@backstab86 do you have kids? They find ways to touch your stuff, unless it's in a safe.
@@backstab86 hmm, kids do stuff when one one is watching... it's common sense.
Me (before video starts): I'm about to build a bluetooth boombox. 😁💪🏽💯
Me (1 min into this video): I'm about to buy a bluetooth boombox. 😬😬😬
Kyle Hayden too funny Kyle
Me: still searching to buy a homemamde boombox :)))
im still gonna build one but way easier
I build aluminum boats. Our radios always get burnt from welding or smashed. You’ve inspired me to build an aluminum bombproof radio. ✌🏻
Finally Sound effect 👌👌👌
16:00 12V? Set it to 14.7V. Safe and more power. Also, use 4 ohm speakers.
@Agent X Because I'm too busy designing products to become a video producer too. Learn to take advice as a positive thing and not get offended. Life is too short.
Awesome design! One suggestion. A speaker grill cover would be an added protection and will make this more rugged.
Thanks, easy to add ;)
Не зачем я это посмотрел, но тема классная, вещь хорошая!))))
Yo man, you Tony Stark, bade version 👌💡
Extraordinário... 👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽 Sem palavras.
I just remembered my project when it doesn't played at the end of gluing everything..😂😂
So Sorry for that . U deserve Not this
Rudra 🤣🤣🤣🤣
That happened to me yesterday with my old laptop screen converted to a portable TV project. Everything was fine until I secured the cables with hot glue which melted through some cheap wire shielding and fused two wires. Took me half an hour to find where it happened plus more time to replace those two wires. All is well again.
That’s just how boss he is with electronics, he never makes mistakes.... 😏
Me gusta si te aparece este comentario en español y otro me gusta por este gran trabajo de parlante un teso este hombre 👍
A donde se encuentra este aparato o con quien complicarme
Es un buen trabajo aunque sale muy alto el costo para hacerlo, sale mejor comprar algo ya hecho, y en el caso del proyecto es bueno como satisfacción de que es uno quien lo hizo.
Good