I never guessed this would turn out so well | Project Canam Custom Snorkels and AFR Install
Вставка
- Опубліковано 22 сер 2024
- #canam #maverick #project
I never guessed this would turn out so well | Project Canam Custom Snorkels and AFR Install
In this video...
- Unboxing and install of the Dobeck Performance AFR+
- Mild tuning of the AFR
- Building custom snorkels
Tools And Materials in this Video...
Kobalt Drill Driver - amzn.to/2YqLrLS
Dremel - amzn.to/2Sr3FJ6
Flapper Sanding Disk - amzn.to/35otIpL
Die Grinder - amzn.to/2SsT3tr
Sanding discs - amzn.to/2z1K5MY
Dobeck AFR - amzn.to/2yZagUz
Snorkel Turbo Kit - amzn.to/2Wfpk8m
1” P-Clamp - amzn.to/2zLV6lH
Flat Black Spray Paint - amzn.to/2S813Qj
Red Scotch Brite Pads - amzn.to/2S5I4pD
Hole Saw - amzn.to/2z7RR7N
Clear RTV - amzn.to/35ovGGF
Dielectric - amzn.to/2KJZO5S
Zip Ties - amzn.to/3fmjY42
If you enjoyed, please comment, like, share and subscribe!
Thank you for watching!
Support the channel and up your swag with Mike Sabo merchandise! Visit www.teespring.com/stores/michael-sabo
Equipment I use!
Wireless Mic - amzn.to/2VeEATV
Tripod - amzn.to/2T4ZHW7
Tripod Phone Mount - amzn.to/37OzFfh
Phone Gimble - amzn.to/2vWDTnG
GoPro Hero 7 Black - amzn.to/2HQMMSp
Video Editing - amzn.to/39Ug66z
Thumbnail Editing - amzn.to/2HJuanv
My Favorite Energy Drinks... and they're cheap 😎
Reign Energy - amzn.to/2vXv5hk
Strikeforce Energy use Promo Code: SABO20
Companies and Sponsors please contact: michaelsabo350@gmail.com
Add me on Instagram @michaelsabo350
DBC Racing
Website: www.dbcracing.com
Instagram: @dbc_racing
I own the license to use any and all music in this video.
As always, thank you for watching and you ROCK!!! 🤘 I am realizing I forgot to share a lot of things in this video. We barely used any of the turbo kit! So while it's about 90 bucks, you still have 2/3 of the kit left to use for other projects! List of items below...
Kobalt Drill Driver - amzn.to/2YqLrLS
Dremel - amzn.to/2Sr3FJ6
Flapper Sanding Disk - amzn.to/35otIpL
Die Grinder - amzn.to/2SsT3tr
Sanding discs - amzn.to/2z1K5MY
Dobeck AFR - amzn.to/2yZagUz
Snorkel Turbo Kit - amzn.to/2Wfpk8m
1” P-Clamp - amzn.to/2zLV6lH
Flat Black Spray Paint - amzn.to/2S813Qj
Red Scotch Brite Pads - amzn.to/2S5I4pD
Hole Saw - amzn.to/2z7RR7N
Clear RTV - amzn.to/35ovGGF
Dielectric - amzn.to/2KJZO5S
Zip Ties - amzn.to/3fmjY42
Hi keep up the great work! And also were are you from?
Michael Sabo You looking to sell I’m interested I like that job you did on the snorkel
@@mattrd7477 the Maverick? I will probably sell it after a few months of testing and making videos on it; thank you for the compliment man 🤘
Michael Sabo what if you put body vents where the air should flow in the best at? It would look sick and it works
some reflective tape like that is flammable because of the glue you might want to check that just saying.
When I was 12 I saved up to buy a banshee and it was just like this machine. It sat for a year while I saved up money to fix it
Sucks hearing these stories man; at least it's a good opportunity to learn the machine and build some skills 🤘
Thanks mike. This ATV thing is getting bigger everyday. Thanks for the hard work. I know how hard it is to produce youtube videos.
Thank you LiveFreeOrRIP, means a lot to hear this!
Clean job as usual. Keep up the standards.
Agree with you that you feel you were played with the deal. But again the price seemed fair. But again with all the repairs and investments, it comes back to normal retail price. End of the day , you shared a lot of knowledge to most backyard enthusiasts like me. Please do share all the work and tips that you do coz not everyone is professional here.
Well said man; thank you for watching my video and for the support; in the end you're right; it's all working out
I would love to hear about you first cupple of quads
Dude you have every right to call the previous owner out on his deceiving manner.
nice vid though bro!
Thank you Edgardo Caceres, I appreciate that!
killer job on the snorkels, almost looks factory🔥
Thank you jordan leyva!
Your attention to detail is second to none. If I had a machine that needed some work done to it I would hire you in a second. I hope this channel keeps growing. It would be cool if you could come up here to Michigan and rip it with SXSBlog!
Thank you so much for the compliments man! I will be at silver lake this summer to rip! I'm not sure if I will have the Maverick though; most likely the banshee and 250r
You have a lot of integrity. Keep up the good work.
Love the work.... all of it. Content this good is a blessing for the folks with less knowledge and the kid or kids you mentioned.
Keep it up buddy👍
Thank you so much Michael Gates / THE UNFINISHED!
A lot of people will put a in line electric fan in the CVT inlet to keep it cool on the can am’s
Great idea; thank you bro!
Coming together looking good
Thank you Scott Hall!
Nah Mike, keep giving 2Vintage and the previous owner hell. Previous owner new what he was selling. Love the content bro! Starting to become my favorite channel.
David Jackson what about 2vintage?😂
@@peytonknown7945 just like when he says stuff about them
oh😂
@@peytonknown7945 yeah why?
What did 2 vintage do
Hey Mike, love your content, it was your Banshee series that made me decide to start looking for one to rebuild myself. (I've always wanted one too) keep them coming.
Thank you Mark Piraino! I appreciate you watching these new videos and my Banshee videos as well; hope you're rebuild is coming along well (or search for one)!
Looks great you should get yourself a flush cutter for your zip ties it will save you lots of cuts in the future and make a great looking job look even better.
Good call! Can't tell you how many times I've been nicked by a zip tie
Love your project maverick series. I ended up with the exact machine and learnt and copied a lot of what you have done on this project. I live in Canada and a lot of parts are not available or are double the price so have had to improvise on most stuff. Thanks for the great job.
32:15 “..the guy yanno I’m not a fan of him..” Honestly great how you ended it like that😂☠️ and I can relate to you and everyone who’s bought used dirt bikes, quads, side by sides and snowmobiles, literally anything with a motor that you can have fun on for a few grand just to ride it for a 1/5 of what the owner did and it shits the bed because of poor preventative maintenance and ownership. But that’s why I love this channel I strongly believe you’ve taught everyone one of us subs something actually useful in life, because we can take those neglected machines and turn them into a good learning experience by fixin em up and its amazing when you can broadcast that information to literally everyone who’s on this platform in the world that has the same passion for motorsports. Thanks Mike.
When it’s done we have to see a video of this thing ripping. It’s coming along awesome.
Oh hell yea man! Already have a trip planned!
as someone who builds pc's i approve of your cable management.
Haha Thank you so much Christopher Lindsay!
Yeah bro let’s hear about first quad and some pics. Keep it up! Can’t wait to put the 250r together!
Thank you Ryan Quackenbush! I will see if I can find pics of that first quad when I first bought it; could be an interesting video to share.
Good video. Look forward to the belt sensor install
Thomas King thank you for watching! 🤘
Amen well said!! Bro. I get what you are saying, I’ve been there before with someone not being transparent on all the issues of a quad motorcycle car Etc.. it bugs the shit out of me. It’s like Just be honest and up front with shit. I don’t like being lied to. I know I’m always upfront and honest about anything I’m selling.. I enjoy your videos so much. I’m so glad I found your Channel. I work at Boeing as a machinist and your videos pass the time while my machine is on a long run I enjoy them so much… keep up the great wk.
Hands down awesome work!!
Thank you ems220chief!
I love the way you flared the snorkels on the ends. Nicely done !!!! 😉👍👌
Thank you Darth Goggins!
Im stoked about the next 250r video! Sweet videos. Keep up the good work pal
Thank you Lane Carr!
Snorkel came out mint. Awesome job bro
Thank you Rams and RZR!
Hey man I really appreciate what your doing here with this machine, and I totally get what your saying about the previous owner. I went through a nightmare situation with my sons raptor and it had alit if hidden issues that I didn't know about and wasn't prepared to deal with. One thing after another soon after I bought it that I didn't see and wasn't skilled enough to deal with and took some funds to take care of. Anyway, love the Maverick and looking forward to seeing the end result and would buy that thing in a second after seeing the work you've put into it!
Thank you tackhammer222! I appreciate the kind words and sorry to hear about the experience with your sons Raptor!
Great video man! I love how you go through all the comments not alot of youtubers do that! Keep up the great work!!!👍
Thank you Hunter Wingler! I try to keep up!
Check transmission fluid while plastic is off. Also change from and rear differential fluid. Rears seem to get dirty quick. Also noticed your gas light on in one video. Add more gas to make sure your gauge works. My float became saturated and sunk
Thank you Corey Brickner! I'm going to fill up the tank today; good call to check while she's apart.
Another rad video, Mike! Love your craftsmanship and attention to detail!
Thank you so much Jordan Panich!
Sweet.i can't wait to see the finish
Love the pashion you have keep it up live the vids
Thank you Slow Dirty Boyz!
Very clean snorkel install. great job
Just a thought 🤔 how about painting the snorkels can am yellow,to break things up,and to tie things together🤷♂️. Even if you don’t (paint snorkels)you did an awesome job,and yes it does look oe. Great channel 👍and great job on the Maverick. I guess by your comments you are more of a race quad/dirt bike guy,but you do a great job on these sxs,you seem right at home,like a duck in water.
Scott Jeans, thanks so much for the kind words. The yellow outlets for the snorkels would look pretty trick; maybe down the road I will paint them and see what it looks like.
Man mike you're a professional, work came out GREAT 👌👍
Thank you Arneal Laloo!
I really admire your attention to detail and level of craftsmanship while repairing and modding this machine. I would suggest that you don't need to point out what a "hack" this or that was, but simply show what you found without negative commentary and then show your remedy. You would come across much more humble if you did and it would definitely be the "high ground" approach. I don't want to sound like the feel good police or anything like that. lol Your work really does speak for itself though. Keep up the great work with repairs / mods. Thanks for sharing the process!
I think this is very well said and great advice; thank you NickBeek!
Your doing a great job. Keep up the videos. I own a Maverick also. I would suggest putting a much larger ground wire on the engine. You will notice it will be hard to start when its hot after a hard ride. A large ground wire helps. Great videos!!
Thank you for the info and suggestion coolinthewoods!
That wiring though 👌🏾👌🏾
Thank you bro! 🤘
6:13 what’s the PN for that section?? I just bought a mav w/ the same tiny homemade snorkel piping there
@@bobbyj870 707000909 is for the intake duct. There are rubber joints as well; your best bet is to find one all together on ebay; theyre usually like 15-30 bucks.
I recently bought a Honda cr125 off of Facebook market. It ran great when I decided to buy it from the guy, then the next day I made sure all the fluids were level and the bike was warm then rode it for about 30 minutes before the motor seized..
Hey man, just wanted to say thanks for the videos! I bought a 2020 ranger 500 this spring and thats why i ended up finding your ranger build. And Ive just kept watching your videos ever since lol. I like seeing g what you do with the maverick and I've started watching your 250 honda build now. I'm not even a motor head or anything, but your videos are clear and easy to follow. Crazy how you can take all that stuff apart and put it back together bro lol.
P.S. rip on the previous owner all you want lol.
Jake, thanks so much for the compliments and for watching my videos; maybe in time I can turn you into a gearhead yourself
Snorkel kit looks great! Great job on the wiring too!
Thank you Cory Derosier!
Learning so much from your channel
He went off on that wiring harness! That’s cleeeaaannn
Thank you BillyTheOne!
Great rant!! And u hit so many great points!!!
Haha, thank you danny b!
great vid michael love how you make everything so clean on your builds keep up the good work!
Once this project is complete then it's time to take the MS show to moab. Folks use near stock SxS's on the moab trails all the time and it looks like a total blast.
May just have to make a trip across the country to do this 🤘
Come one Mike! Tig welder! Your welds would be perfect for the small stuff you do
When I get the new shop I will invest and practice with TIG; I'd love to master that 🤘
You.should add a co2 nozzle to the clutch case when it gets really hot give her a squeeze makes sence to me . And if you get give yourself a squeeze .
Yes I do have the exhaust rap. My first set of PVC snorkel's melted but my second set is doing good with the heat/ac tape on them
I try not to comment on things too much but just like to say your welding job for a hobby welder if that’s what you are looking very good it’s not easy the weld if you don’t do it all the time especially on round surface so kudos to you. As far as your snorkel kit goes bang on. that looks really good and I like your idea of the exhaust I might actually try doing that on my razor. And to address the issue of how you been talking about that fella yeah maybe it’s a little bit much but I see your point and I agree if you don’t know what you’re doing Or don’t have the funds to do it. Or can’t afford to get it fixed be honest with the person don’t screw them over I’ve been the same situation where I bought stuff and it was not what it seem to be I mean there’s certain things you can check over but the motor crank bearings stuff like that. Hard ti look over. So again my hats off to you sir good work
Thank you northwesterontarioguy, the compliments on the welds mean a lot and on the snorkel work; well said about the situation with the previous owner; thank you for the comment 🤘
Another great video! Keep these vids rolling!!
Thank you Logan Reed!
That's why I buy new.
Never used unless you got skills to repair.
Then again, that's the risky business when buying used of any kind
Very true man; a lot of this is to be expected.
Being a mechanic, the thing I hate to hear the most is “ I’m gonna sell it just do this”
Ah man, you hear it all the time too I'm sure; people just don't care what the next owner will have to face.
Sweet
“I’m not a fan of him” LOL!!!
Sabo way to stick to your guns. The ball busting is justified. Been there myself. Nice job on the snorkels!
Thank you Dan Benard!
Nice video broski.
Thank you broski!
My fav UA-cam Channel🙌🏼keep up With the great work😀 greetings from Norway🇳🇴🇳🇴
Thank you TheTreepy! Greetings from the USA!
Love your videos bro
Thank you bro! 🤘
Another great job, nice work !
Thank you Frank G!
Nice video!
Thank you Hotdogsandbuns!
It will be interesting to see what the air flow and heat will be out of the snorkels , and if there is a way to boost the air flow if you think it needs it .since you say that retained heat is the thing that kills everything due to the shrouding of the engine and cvt.
I'm interested to see how much heat is coming out of these pipes too. There are fins on the back of the CVT that pull air in from the front ducts and shoot it out these exhaust ducts.
@@MichaelSabo will be looking for your results.
very helpful video and yes there are lot of people that rip people off
I feel you sabo about getting clapped out quads and I agree with you 100 if your not transparent when selling stuff don’t sell it.
Hell yea, thank you br1zzl3!
Great vedieo I have the same machine. I bought it same way u did knocking. Trun out to have a ton of problems also went through them all and runs great again. Snorkel's need the heat tape mine melted. If u can find a heat solution for the plastic next to engine and cup holders let me know! It's a hot machine. I do live in Florida. U can't even touch a yeti cup after it's in cup holders for a couple hours.. But I do feel u with the guy u bought it from.
Oh man, I hope the coupler doesn't melt 😂 Do you run exhaust wrap on your exhaust to help with the heat too, that could possibly help out. Time will tell with my setup! Thank you for the comment!
I would love to see you take a rip in a YXZ!
I would love that too man; I think after I run this Maverick for a little, I should do a YXZ
Michael Sabo 😍
Michael Sabo Lol, just think a side by side without a belt. It has a real transmission with a foot clutch for 11 thousand rpm burnouts!
Nice work Mike! Also keepin my eye for the 250r build vids! 😁
Thank you Robert Edwards! I am praying for the 250R parts to come back from PC
Fire 🔥 vid as always man you know you’re putting out quality content when I hop off of a TJ hunt video...
My maaaan 🤘 thank you so much bro
The P.O. is probably watching these videos..... at the same time he's hoping his friends AREN'T! I'd be embarrassed if I did that kind of hack job and was later exposed as BEING THAT HACK. When things are all covered up under the hood and other covers, it's easy to say "...…. hey! look what I got done" and your friends wouldn't have a clue about the hackiness (probably not a real word, but it is now) going on under all those covers. Good to see you explain your issues with the P.O., and put it all into perspective. You do nice work. (gotta stop saying "dude").
Thanks so much S FERG! I think "Hackiness" should be added to the dictionary lol. I can't make any promises on the dude thing as it's been embedded in my lingo for quite some time
you should turn one facing forward to scoop air in.
That's a trick idea but it would conflict with the air flow of the system; air is pulled in with the fins on the clutch from the snorkel up front and the two pipes that I made are for exhaust where the hot air is pushed out.
While you have it all torn down, upgrade your seatbelts to 4-point harnesses.
That's a great idea; it actually has pro armor 4 points on it already (although I am considering replacing them because they're pretty whooped lol
Snorkels look great bro keep up the good videos and I agree with you some young kid coulda got burnt on that deal
Thank you chris Wilson!
i had a warrior awhile ago that had sooo many wiring issue and the shop i bought it from said it was in good condition. sorta just figured stuff out myself and kept it running until the transmission blew up
You should get a belt temp gauge like a razor back system
Already on order man!
everyone has bought crap at some point, you can’t moan as usually you buy it cos it’s in your budget , judging by the state that thing was in you will have a few more problems yet.
it does piss you off though when each problem arises. i’m having a break from bikes at the moment as i just can’t be bothered to fix up someone else’s hack job, just. broke even on the last one which was really really hard work. i’ll take more care if i do another one
Well said, thank you antony sidney!
Your content is 🤟
Thank you _ ThatGunterGuy42 _!
yeahhh boyyyyy
Your channel bro. If people don’t like what they see, they can watch something else, plan and simple. Keep up the good work bro. #snowflakes
Looks awesome man 🤟🏼
Thank you Dustin Richards!
Can you do a yfz project?, i have a yfz and it has a heat problem and i wouldl like to see you work on one
I may do one in the future man, yes
Hey mike great job!!! I have a 2016 1000 turbo and you we’re saying you might have to cut up the back net for your snorkels. Maybe check into the net for the turbo model cause it already has the hole cut out for the intercooler.
Cheers
Thank you Jim Macdonald! I will have to look at the turbo net; for now I am going to cut mine to make it work.
I love your videos! Keep up the great work man.
Thank you Connor Koppany!
the fins on the clutch is what pulls the air in it doesnt need to be a ram air type setup.
Thank you for the feedback man!
@@MichaelSabo enjoy the series I had the turbo model forever now I am collecting 3 wheelers and old school 4 wheelers.
My deal has always been... I dont care if you dont tell me about issues.. but dont lie to me. I recently didnt buy a banshee because the seller tried telling me all the work dont to it was recent. Yet he showed pictures of the paperwork from Mac Daddy racing... it was all Dated July 2015 and it had at least 5 years of ORV stickers on it yet seller said he didnt have many hours on the dune port top end. 5 years ago isnt "recent". At the end of the day these are used machines and they arent going to be showroom condition so I expect there to be issues.
Very well said khonky; I agree with you
Nice!! Great job...:-)
Thank you Robert Kohut!
I question the use of an exhaust wrap on something that can get wet/submerged. Those things absorb water as is, just seems like a problem waiting to happen.
Great video as usual man. I like how you edit. Are you still doing subscriber builds mike
Thank you Dirt Squad ATV! Yes, I've been really focused on the projects right now but I will still be doing the bike of the week vids 🤘
love your channel 💪
Thank you bro! 🤘
I think you should do the same to the air intake
Not a bad idea bro!
Mike can you not find a fan blade rotor that will fit on the CV rotor that will pull air in to cool it down .
I'm at half way in and I'm really hoping you use band clamps on that snorkel
22:19 thank God your using clamps lol
Hey boss, i know you were going off the instructions for the AFR kit, but you wont get an accurate reading of both cylinders with it being behind only one of the cylinders. The Wideband needs to be past one of the collectors down stream where its getting exhaust from both cylinders. Just me $.02..
Hey Jeff; I appreciate the info bro! I actually read up on this and should have included this in the video; directly from Dobech (but not quoted lol); this system is designed to run off of the readings from one cylinder and my not be as 100% accurate as a two O2 sensor setup but the amount of difference is very small. The reading will be more accurate the closer it is the cylinder as opposed to where the exhaust comes to a "Y" after the cat. This is just from what I gathered and I do appreciate you chiming in! 🤘
i'm not sure if it would work but i'm curious if one could use some low power yet super high rpm computer fans to increase inflow & outflow of air to that clutch via the snorkel system? great job tho, much better than the hot mess that was in there before
CriticalThinker08 I was thinking the same thing. We used to use those on our mod sleds. One over the primary one over the secondary.
It's a great idea; I know they make inline fans to increase flow; I've read conflicting reviews of their effectiveness though.
Michael Sabo They worked great for us. The one over the primary was the fan that drew in the air and the one over the secondary was the fan that expelled the air. Had them hooked to a toggle switch and we turn them on for doing hard pulls and when we took a break to cool everything off
I’m 17 and bought my first quad when I was 16 bought a 400ex that came with a lot of problems and still dealing with them a year later
Sorry to hear that man; good opportunity to learn the machine and build some skills though 🤘
Love you videos
Thank you Talan Robinson!
Love the vids
Thank you ep0x!
I’ve been down that road with ppl not being honest about what they’re selling. It’s not a big deal if I can’t fix it I’ll pass but more than likely I’ll buy because I buy projects lol just say what’s wrong with it so I can don’t have to keep chasing problems
Yo you looking to sell when you’re done with this like so he can see
Yea man, after a little riding I will be selling it for the next project
So in the end, do you think the $6,000 was worth it?
I think it should've been at least 4500. He's probably already at LEAST 20- 40 hours of labor in. Imagine that labor in a shop lol
For me yes, but like TheExisting 1 said, if I had to pay labor I would have been screwed lol. I have a spreadsheet of all my expenses which totals 1700 in parts at the moment; so for under 8k I'll have a machine that I can consider reliable.
Should have painted the pipe below where you did paint. The gloss black and then the flat black just looks odd. Just me tho.