Lexus IS F Muffler Delete! How to + Sounds clips

Поділитися
Вставка
  • Опубліковано 2 кві 2019
  • Freddy shows you step by step how to do the Lexus IS F muffler delete on his 2008 Lexus IS F then shows you clips of how amazing it sounds!
    Exhaust pipe amzn.to/2HWmznN
    Exhaust clamp amzn.to/2FVzXq8
    Decent cheap welder amzn.to/2uJsB2e
    Steel bracket: 1-3/8 in. x 36 in. Zinc Steel Punched Flat Ba
    Support PMM by shopping through our store: ►www.amazon.com/ideas/amzn1.ac...
    Tools I LOVE
    ►BADASS Screw Drivers: amzn.to/2dQ5Ajx
    ►Amazing Electric Ratchet! amzn.to/2e1E1qS
    ►Pivoting Ratchet: amzn.to/2eL1n4V
    ►Awesome Cutter/Stripper/Crimper amzn.to/2e1ExoA
    ►POWER PROBE amzn.to/2dMGS8g
    ►Ratcheting Wrenches amzn.to/2dME8I2
    Equipment I use
    ►Welder: amzn.to/2dQcftY
    ►Camera: amzn.to/2fbMs5s
    ►Microphone: amzn.to/2fkdnez
    ►Tripod: amzn.to/2e1IgCC
    ► / pmmods
    ► / poormanmods
    Music by: / nocopyrightsounds
  • Авто та транспорт

КОМЕНТАРІ • 86

  • @NZcarBlog
    @NZcarBlog 5 років тому

    These are open diff but has a VDIM that kinda helps lay down 2 black lines. Acts like open diff on a track though.

  • @kylemorris5180
    @kylemorris5180 5 років тому

    I Love it Freddy I though you were gonna baby this one but this is much better. Great channel

  • @dorian8876
    @dorian8876 5 років тому +1

    well done /again!! music for my ears!

  • @kevinreppel2459
    @kevinreppel2459 5 років тому

    What mic do you use for exhaust sounds? How do you think a turn down would sound?

  • @brayan8174
    @brayan8174 5 років тому +1

    Hi my friend, l have an is 350 and and l would like to make this job on my car but l've heard some people saying the car feels slower after doing the mufler delete. Is that right ? Thank u.

  • @xdejablu3x
    @xdejablu3x 4 роки тому

    Hey brother, did you happen to lose any low end torque by doing a muffler delete? I have the X-Force catback on mine currently but was toying the idea of replacing the mufflers with a custom muffler deleted straight pipes in the rear. I would hate to lose that torque just for some more sound.

  • @MrFrazor
    @MrFrazor 3 роки тому

    Hi where can I get replacement rear exhaust bracket that bolts in to the rear body the holds the hangers?

  • @brianwilliams1114
    @brianwilliams1114 3 роки тому

    I love it with the muffler delete

  • @snuttis91
    @snuttis91 5 років тому +1

    Hey Freddy, that's some nice sounding car you got there =), btw what video editing software should you recomend?

    • @PoorManMods
      @PoorManMods  5 років тому +1

      Thanks! Ive been using adobe premier since my college days

    • @therealboofighter
      @therealboofighter 5 років тому +1

      I use Adobe premier elements because it’s cheaper and you can still do a lot with it

  • @gavinoliver8074
    @gavinoliver8074 5 років тому

    Not gonna lie Freddie that sounds epic! Lovely burble.

  • @jayr1757
    @jayr1757 5 років тому

    Sounds good man, in respect to what the other guy said about the drone.. where do the RPMs rest going 70-75MPH on the highway top gear?

    • @PoorManMods
      @PoorManMods  5 років тому

      Right around 2k i think

    • @jayr1757
      @jayr1757 5 років тому

      @@PoorManMods Yeah, there shouldn't be much highway drone at that RPM then I'd think.

  • @carlosdavis2073
    @carlosdavis2073 3 роки тому

    What store did you get the replacement pipe from? @ 3:40 ? Do they sell these at Autozone or anything?
    Thanks for this video btw !!!

  • @Chambers45
    @Chambers45 5 років тому

    Its such a refined sound, Toyota knows how to make a V8! I can't get over how good this sounds!

    • @PoorManMods
      @PoorManMods  5 років тому

      Wait till you hear it in person! P.S. the supra has another unbelievable problem with it

  • @comyahoo8515
    @comyahoo8515 4 роки тому

    nice video:) Please tell me the pipe diameter:)

  • @DylanTK
    @DylanTK 5 років тому +4

    I dig it with them cut off, but i guess it depends on drone

    • @PoorManMods
      @PoorManMods  5 років тому +1

      The drone is ok with but im also coming the supra...so everything has less drone to me lol

  • @nathanlee3713
    @nathanlee3713 5 років тому

    No rattling with this setup? also, I know drone is subjective to everyone. But how's highway cruising? Great vid btw

    • @PoorManMods
      @PoorManMods  5 років тому +1

      There is a little rattle at idle when your standing behind it
      Head shield i guess? Its great on the highway, the most drone is going up hill on back roads

  • @jimsoiland
    @jimsoiland 5 років тому

    Hard to tell from the video how much louder the delete is. Can you drive with a gentle foot without pissing off the neighbors or is it just insanely loud?

    • @PoorManMods
      @PoorManMods  5 років тому

      It's really not that loud at all. I highly recommend this mod

  • @gsheverything_2716
    @gsheverything_2716 5 років тому

    Sweet man

  • @ThiccJungles
    @ThiccJungles 4 роки тому

    How did you manage to weld all the way around the diameter of the pipe?

    • @PoorManMods
      @PoorManMods  4 роки тому

      Using a mig welder, its tricky but possible

  • @MathuCampbell
    @MathuCampbell Рік тому

    Did this cause any codes to be triggered or lights on the dash?

  • @heyhayhay247
    @heyhayhay247 5 років тому

    Any plan to delete the fake tips to run a more traditional setup? No offense if you like them; just curious.

    • @PoorManMods
      @PoorManMods  5 років тому +1

      Yes i was thinking about swapping them out for something real

    • @heyhayhay247
      @heyhayhay247 5 років тому

      @@PoorManMods I don't think anyone would fight you on that ha

  • @Papa7Bravo
    @Papa7Bravo 5 років тому +1

    One thing I'd like to ask if you've ever thought of this, this is mainly in question for older cars like the supra and that.
    Could you give a much better spread of light from your tail/brake turn signals by using acrylic on the inside of the lens. The idea being that the acrylic with light shining into it disperses the light around the edge. On the older cars when you have your tail lights on you can see the bulb lighting up but not so much right to the edges of the housing. Could the acrylic lined lens give better light? It's something I really want to try myself having a 1982 and 85 Ford fiesta the tail/brake lights arent bright despite putting Led's in you just see the bulb lighting up behind the lenses that's it.

    • @PoorManMods
      @PoorManMods  5 років тому

      You could try foil or chrome tape

    • @Papa7Bravo
      @Papa7Bravo 5 років тому

      @@PoorManMods but I mean like having load of layers of acrylic between the bulb and the lens do the light has to go through the edges of the acrylic which theoretically spreads the light evenly so instead of there being a hot spot where the bulb is, it may light up the whole shape of the tail light

  • @reghinaldrodriguez7730
    @reghinaldrodriguez7730 5 років тому

    how (if it even does) affect our o2 sensors?

  • @HEMSJim
    @HEMSJim 5 років тому +1

    Sounds great but I think you'll be craving more loud after a while. I tried 4 different exhausts before I was happy, I have sound clips on my channel if you're interested. Anyway, great video and you've got a new subscriber!

    • @PoorManMods
      @PoorManMods  5 років тому

      Thank you! Ill check out your videos!

    • @AImighty
      @AImighty 5 років тому

      Same. I did the muffler delete on my ISF about 2 months ago after having the car for a little over a year. While it’s Definitely a lot louder and turns heads, it’s not loud enough. I guess I got used to it. I can’t imagine what a Custom Exhaust with PPE headers would sound like on this car in person. Especially since a simple muffler delete blew me away.

  • @jesusfraga6217
    @jesusfraga6217 4 роки тому

    Yo tengo 2006 no más le q to los a silenciadores ya si se va a escuchar q siera tu comentariograsias

    • @vicv871
      @vicv871 2 місяці тому

      Amigo ese lexus es un ISF y es de 8 cilindros es por eso que se escucha así. esos carros fueron producidos del 2008 al 2014 esos no fueron en el 2006 si le quitas tu silenciador al tuyo sonara un poco mas pero nada parecido al del videos que es de ocho cilindros, saludos.

  • @Anthony-dk7de
    @Anthony-dk7de 5 років тому +3

    Did my muffler delete yesterday it drones LOUD at 2k RPM. Hopefully it gets quieter soon

    • @quickla2005
      @quickla2005 5 років тому

      Have you noticed a difference in these past 2 weeks? Was thinking of doing mine tomorrow

    • @Anthony-dk7de
      @Anthony-dk7de 5 років тому

      SilentAdmin its a little quieter but not by much.

  • @notmybeast8722
    @notmybeast8722 2 роки тому

    Will this exhaust affect the engine?? Am thinking about doing this mod to mine?? I really need to know

    • @PoorManMods
      @PoorManMods  2 роки тому +1

      It will make it run better

    • @notmybeast8722
      @notmybeast8722 2 роки тому

      Will it give it more hp?

    • @PoorManMods
      @PoorManMods  2 роки тому +1

      @@notmybeast8722 a tiny bit more

    • @vicv871
      @vicv871 2 місяці тому

      @@notmybeast8722 you will gain one horse power

  • @Macthemechanic69
    @Macthemechanic69 4 роки тому

    Doing the headers soon ?

  • @SNORKYMEDIA
    @SNORKYMEDIA 2 роки тому

    why would you hard bolt it to the car when you had rubber mounts already there? you had a welder why not fab up a hook to go in the original rubber????

    • @PoorManMods
      @PoorManMods  2 роки тому

      i later made a hanger and used rubber

  • @PimpedPrevia
    @PimpedPrevia 5 років тому +7

    That is a poor man mod. Sounds Great Man!! Why pay 1K when you can do it for 20$

    • @PoorManMods
      @PoorManMods  5 років тому

      Yup! Thank you!

    • @Anthony-dk7de
      @Anthony-dk7de 5 років тому

      Usual price is $100-$150 for a muffler delete

    • @Lsutton04_
      @Lsutton04_ 3 роки тому

      @@Anthony-dk7de yeah, they’re talking about when you do a freaking electric saw hack job and leaving it open under the car without extending the tips out through the original exit in the bumper

  • @ericzakareskie1054
    @ericzakareskie1054 5 років тому

    Nice Shirt...AOAA. Cool place.

    • @PoorManMods
      @PoorManMods  5 років тому

      Thanks! Last time i was there got me fired from my job! Hahaha

    • @ericzakareskie1054
      @ericzakareskie1054 5 років тому

      @@PoorManMods My wife used to work there in the office. We were there a lot. I have many shirts lol.

    • @PoorManMods
      @PoorManMods  5 років тому

      @@ericzakareskie1054 oh thats awesome! ive done 2 or 3 times and is great and beautiful! Heres what happened last time i went ua-cam.com/video/amM41eLLnoU/v-deo.html

    • @ericzakareskie1054
      @ericzakareskie1054 5 років тому

      @@PoorManMods You're not the first person to say CJ's is awful to work for.

    • @PoorManMods
      @PoorManMods  5 років тому

      @@ericzakareskie1054 yeah unfortunately thats how most employees feel

  • @bradwilson4998
    @bradwilson4998 5 років тому

    If the heat shields don't rattle, you got lucky. Not that I have any room to talk, but probably should have removed them. Either way, if you get rattles you'll know what it is!

  • @zacjac
    @zacjac 5 років тому +8

    Why spend $$$ when you can spend 10 bucks awesome!!

  • @01FozzyS
    @01FozzyS 5 років тому

    Man Toyota sure got lucky with that exhaust tone without the mufflers. Love the sound!

    • @PoorManMods
      @PoorManMods  5 років тому

      Yessss

    • @fbeastmode
      @fbeastmode 5 років тому

      It's not luck it's hard work and Dedication it was the first F performance car to show case this isf first 8 speed transmission that every was hating on (why you need 8 gears) blahs blah now everyone on bored... 2008 come on now...

    • @01FozzyS
      @01FozzyS 5 років тому

      @@fbeastmode Take note, I said without the mufflers,bud. Doubt if they tune it WITHOUT mufflers. That's LUCK for any car company.

    • @fbeastmode
      @fbeastmode 5 років тому

      @@01FozzyS I got you... yea true. other car that been cut off sound raspy af! But the isf wasnt that bad.. like the camero sound nasty but poeple love it..

  • @nemesisc4926
    @nemesisc4926 4 роки тому

    Still too soft lol. But sounds good

  • @greebuh
    @greebuh 3 роки тому

    Poor men don't have lifts...

    • @PoorManMods
      @PoorManMods  3 роки тому

      I didnt pay for it!

    • @greebuh
      @greebuh 3 роки тому

      @@PoorManMods damn, I need that hookup

  • @ronchristella
    @ronchristella 4 роки тому

    Way to treat a Lexus like a civic. 🤦🏻‍♂️

    • @PoorManMods
      @PoorManMods  4 роки тому +1

      Only a fool would pay thousands of dollars for some pipe just to make the car louder when they are capable of doing it themselves.

    • @ronchristella
      @ronchristella 4 роки тому

      Poor Man Mods that’s like putting an aluminum can in your bikes wheel well for sound. Treat the car with some respect. From an isF owner bro!

    • @PoorManMods
      @PoorManMods  4 роки тому

      I respect my car and money. If i can do something myself i will.

    • @ronchristella
      @ronchristella 4 роки тому

      Poor Man Mods to each is own bro🙏🏼